- Release 0.8.4.

git-svn-id: https://fail2ban.svn.sourceforge.net/svnroot/fail2ban/branches/FAIL2BAN-0_8@754 a942ae1a-1317-0410-a47c-b1dcaea8d605

.coveragerc

@@ -1,12 +0,0 @@
-
-[run]
-branch = True
-source =
-    config
-    fail2ban
-
-[report]
-exclude_lines =
-    pragma: ?no ?cover
-    pragma: ?${F2B_PY}.x no ?cover
-    pragma: ?systemd no ?cover

.gitattributes

@@ -1 +0,0 @@
-ChangeLog linguist-language=Markdown

.github/ISSUE_TEMPLATE/bug_report.md

@@ -1,70 +0,0 @@
----
-name: Bug report
-about: Report a bug within the fail2ban engines (not filters or jails)
-title: '[BR]: '
-labels: bug
-assignees: ''
-
----
-
-<!--
-  - Before reporting, please make sure to search the open and closed issues for any reports in the past.
-  - Use this issue template to report a bug in the fail2ban engine (not in a filter or jail).
-  - If you want to request a feature or a new filter, please use "Feature request" or "Filter request" instead.
-  - If you have rather some question, please open or join to some discussion.
-
-  We will be very grateful, if your problem was described as completely as possible,
-  enclosing excerpts from logs (if possible within DEBUG mode, if no errors evident
-  within INFO mode), and configuration in particular of effected relevant settings
-  (e.g., with ` fail2ban-client -d | grep 'affected-jail-name' ` for a particular
-  jail troubleshooting).
-  Thank you in advance for the details, because such issues like "It does not work" 
-  alone could not help to resolve anything!
-  Thanks! 
-  (you can remove this paragraph and other comments upon reading)
--->
-
-### Environment:
-
-<!--
-  Fill out and check (`[x]`) the boxes which apply. If your Fail2Ban version is outdated, 
-  and you can't verify that the issue persists in the recent release, better seek support 
-  from the distribution you obtained Fail2Ban from
--->
-
-- Fail2Ban version <!-- including any possible distribution suffixes --> : 
-- OS, including release name/version : 
-- [ ] Fail2Ban installed via OS/distribution mechanisms
-- [ ] You have not applied any additional foreign patches to the codebase
-- [ ] Some customizations were done to the configuration (provide details below is so)
-
-### The issue:
-
-<!-- summary here -->
-
-#### Steps to reproduce
-
-#### Expected behavior
-
-#### Observed behavior
-
-#### Any additional information
-
-
-### Configuration, dump and another helpful excerpts
-
-#### Any customizations done to /etc/fail2ban/ configuration
-<!-- put your configuration excerpts between next 2 lines -->
-```
-```
-
-#### Relevant parts of /var/log/fail2ban.log file:
-<!-- preferably obtained while running fail2ban with `loglevel = 4` -->
-<!-- put your log excerpt between next 2 lines -->
-```
-```
-
-#### Relevant lines from monitored log files:
-<!-- put your log excerpt between next 2 lines -->
-```
-```

.github/ISSUE_TEMPLATE/feature_request.md

@@ -1,35 +0,0 @@
----
-name: Feature request
-about: Suggest an idea or an enhancement for this project
-title: '[RFE]: '
-labels: enhancement
-assignees: ''
-
----
-
-<!--
-  - Before requesting, please make sure to search the open and closed issues for any requests in the past.
-  - Use this issue template to request a feature in the fail2ban engine (not a new filter or jail).
-  - If you want to request a new filter or failregex, please use "Filter request" instead.
-  - If you have rather some question, please open or join to some discussion.
--->
-
-#### Feature request type
-<!--
-  Please provide a summary description of the feature request.
--->
-
-#### Description
-<!--
-  Please describe the feature in more detail.
--->
-
-#### Considered alternatives
-<!--
-  A clear and concise description of any alternative solutions or features you've considered.
--->
-
-#### Any additional information
-<!--
-  Add any other context or screenshots about the feature request here.
--->

.github/ISSUE_TEMPLATE/filter_request.md

@@ -1,59 +0,0 @@
----
-name: Filter request
-about: Request a new jail or filter to be supported or existing filter extended with new failregex
-title: '[FR]: '
-labels: filter-request
-assignees: ''
-
----
-
-<!--
-  - Before requesting, please make sure to search the open and closed issues for any requests in the past.
-  - Sometimes failregex have been already requested before but are not implemented yet due to various reasons.
-  - If there are no hits for your concerns, please proceed otherwise add a comment to the related issue (also if it is closed).
-  - If you want to request a new feature, please use "Feature request" instead.
-  - If you have rather some question, please open or join to some discussion.
--->
-
-### Environment:
-
-<!--
-  Fill out and check (`[x]`) the boxes which apply.
--->
-
-- Fail2Ban version <!-- including any possible distribution suffixes --> : 
-- OS, including release name/version : 
-
-#### Service, project or product which log or journal should be monitored
-
-- Name of filter or jail in Fail2Ban (if already exists) : 
-- Service, project or product name, including release name/version : 
-- Repository or URL (if known) : 
-- Service type : 
-- Ports and protocols the service is listening : 
-
-#### Log or journal information
-<!-- Delete unrelated group -->
-
-<!-- Log file -->
-
-- Log file name(s) : 
-
-<!-- Systemd journal -->
-
-- Journal identifier or unit name : 
-
-#### Any additional information
-
-
-### Relevant lines from monitored log files:
-
-#### failures in sense of fail2ban filter (fail2ban must match):
-<!-- put your log excerpt between next 2 lines -->
-```
-```
-
-#### legitimate messages (fail2ban should not consider as failures):
-<!-- put your log excerpt between next 2 lines -->
-```
-```

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,12 +0,0 @@
-Before submitting your PR, please review the following checklist:
-
-- [ ] **CHOOSE CORRECT BRANCH**: if filing a bugfix/enhancement
-      against certain release version, choose `0.9`, `0.10` or `0.11` branch,
-      for dev-edition use `master` branch
-- [ ] **CONSIDER adding a unit test** if your PR resolves an issue
-- [ ] **LIST ISSUES** this PR resolves
-- [ ] **MAKE SURE** this PR doesn't break existing tests
-- [ ] **KEEP PR small** so it could be easily reviewed.
-- [ ] **AVOID** making unnecessary stylistic changes in unrelated code
-- [ ] **ACCOMPANY** each new `failregex` for filter `X` with sample log lines
-      within `fail2ban/tests/files/logs/X` file

.github/workflows/main.yml

@@ -1,98 +0,0 @@
-name: CI
-
-# Controls when the action will run. Triggers the workflow on push or pull request
-# events but only for the master branch
-on:
-  push:
-    paths-ignore:
-    - 'doc/**'
-    - 'files/**'
-    - 'man/**'
-  pull_request:
-    paths-ignore:
-    - 'doc/**'
-    - 'files/**'
-    - 'man/**'
-
-# A workflow run is made up of one or more jobs that can run sequentially or in parallel
-jobs:
-  # This workflow contains a single job called "build"
-  build:
-    # The type of runner that the job will run on
-    runs-on: ubuntu-20.04
-    strategy:
-      matrix:
-        python-version: [2.7, 3.5, 3.6, 3.7, 3.8, 3.9, '3.10', '3.11.0-alpha.1', pypy2, pypy3]
-      fail-fast: false
-    # Steps represent a sequence of tasks that will be executed as part of the job
-    steps:
-      # Checks-out your repository under $GITHUB_WORKSPACE, so your job can access it
-      - uses: actions/checkout@v2
-
-      - name: Set up Python
-        uses: actions/setup-python@v2
-        with:
-          python-version: ${{ matrix.python-version }}
-
-      - name: Grant systemd-journal access
-        run: sudo usermod -a -G systemd-journal "$USER" || echo 'no systemd-journal access'
-
-      - name: Python version
-        run: |
-          F2B_PY=$(python -c "import sys; print(sys.version)")
-          echo "Python: ${{ matrix.python-version }} -- ${F2B_PY/$'\n'/ }"
-          F2B_PYV=$(echo "${F2B_PY}" | grep -oP '^\d+(?:\.\d+)')
-          F2B_PY=${F2B_PY:0:1}
-          echo "Set F2B_PY=$F2B_PY, F2B_PYV=$F2B_PYV"
-          echo "F2B_PY=$F2B_PY" >> $GITHUB_ENV
-          echo "F2B_PYV=$F2B_PYV" >> $GITHUB_ENV
-          # for GHA we need to monitor all journals, since it cannot be found using SYSTEM_ONLY(4):
-          echo "F2B_SYSTEMD_DEFAULT_FLAGS=0" >> $GITHUB_ENV
-
-      - name: Install dependencies
-        run: |
-          if [[ "$F2B_PY" = 3 ]]; then python -m pip install --upgrade pip || echo "can't upgrade pip"; fi
-          if [[ "$F2B_PY" = 3 ]] && ! command -v 2to3x -v 2to3 > /dev/null; then
-            #pip install 2to3
-            sudo apt-get -y install 2to3
-          fi
-          #sudo apt-get -y install python${F2B_PY/2/}-pyinotify || echo 'inotify not available'
-          python -m pip install pyinotify || echo 'inotify not available'
-          #sudo apt-get -y install python${F2B_PY/2/}-systemd || echo 'systemd not available'
-          sudo apt-get -y install libsystemd-dev || echo 'systemd dependencies seems to be unavailable'
-          python -m pip install systemd-python || echo 'systemd not available'
-
-      - name: Before scripts
-        run: |
-          cd "$GITHUB_WORKSPACE"
-          # Manually execute 2to3 for now
-          if [[ "$F2B_PY" = 3 ]]; then echo "2to3 ..." && ./fail2ban-2to3; fi
-          _debug() { echo -n "$1 "; err=$("${@:2}" 2>&1) && echo 'OK' || echo -e "FAIL\n$err"; }
-          # (debug) output current preferred encoding:
-          _debug 'Encodings:' python -c 'import locale, sys; from fail2ban.helpers import PREFER_ENC; print(PREFER_ENC, locale.getpreferredencoding(), (sys.stdout and sys.stdout.encoding))'
-          # (debug) backend availabilities:
-          echo 'Backends:'
-          _debug '- systemd:' python -c 'from fail2ban.server.filtersystemd import FilterSystemd'
-          #_debug '- systemd (root): ' sudo python -c 'from fail2ban.server.filtersystemd import FilterSystemd'
-          _debug '- pyinotify:' python -c 'from fail2ban.server.filterpyinotify import FilterPyinotify'
-
-      - name: Test suite
-        run: |
-          if [[ "$F2B_PY" = 2 ]]; then
-            python setup.py test
-          elif dpkg --compare-versions "$F2B_PYV" lt 3.10; then 
-            python bin/fail2ban-testcases --verbosity=2
-          else
-            echo "Skip systemd backend since systemd-python module must be fixed for python >= v.3.10 in GHA ..."
-            python bin/fail2ban-testcases --verbosity=2 -i "[sS]ystemd|[jJ]ournal"
-          fi
-
-      #- name: Test suite (debug some systemd tests only)
-         #run: python bin/fail2ban-testcases --verbosity=2 "[sS]ystemd|[jJ]ournal"
-         #run: python bin/fail2ban-testcases --verbosity=2 -l 5 "test_WrongChar"
-
-      - name: Build
-        run: python setup.py build
-
-      #- name: Test initd scripts
-      #  run: shellcheck -s bash -e SC1090,SC1091 files/debian-initd

.gitignore

@@ -1,12 +0,0 @@
-*~
-build
-dist
-*.pyc
-htmlcov
-.coverage
-*.orig
-*.rej
-*.bak
-__pycache__
-.vagrant/
-.idea/

.mailmap

@@ -1,5 +0,0 @@
-Lee Clemens <java@leeclemens.net>
-Serg G. Brester <info@sebres.de>
-Serg G. Brester <serg.brester@sebres.de>
-Serg G. Brester <sergey.brester@W7-DEHBG0189.wincor-nixdorf.com>
-Viktor Szépe <viktor@szepe.net>

.pydevproject

@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?eclipse-pydev version="1.0"?>
+
+<pydev_project>
+<pydev_property name="org.python.pydev.PYTHON_PROJECT_VERSION">python 2.3</pydev_property>
+<pydev_pathproperty name="org.python.pydev.PROJECT_SOURCE_PATH">
+<path>/fail2ban-0.8/client</path>
+<path>/fail2ban-0.8/server</path>
+<path>/fail2ban-0.8/testcases</path>
+<path>/fail2ban-0.8</path>
+</pydev_pathproperty>
+</pydev_project>

.pylintrc

@@ -1,37 +0,0 @@
-# Custom pylint configuration for the Fail2Ban project
-#
-# Set your PYLINTRC environment variable to point to this file
-# e.g.
-#      export PYLINTRC=$PWD/.pylintrc
-
-[FORMAT]
-indent-string='\t'
-
-[BASIC]
-# Fail2Ban uses non-conventional to Python world camel-casing
-# These regexps were originally borrowed from 0.4.x series of
-# PyMVPA which had similar conventions.
-
-# Regular expression which should only match correct module names
-module-rgx=(([a-z][a-z0-9_]*)|([A-Z][a-zA-Z0-9_]+))$
-
-attr-rgx=[a-z_][a-zA-Z0-9_]{2,30}
-
-# Regular expression which should only match correct class names
-class-rgx=[A-Z_]+[a-zA-Z0-9]+$
-
-# Regular expression which should only match correct function names
-function-rgx=[a-z_]+[a-z_][a-zA-Z0-9]*$
-
-# Regular expression which should only match correct method names
-method-rgx=([a-z_]|__)[a-zA-Z0-9]*(__)?$
-
-# Regular expression which should only match correct argument names
-argument-rgx=[a-z][a-zA-Z0-9]*_*[a-zA-Z0-9]*_*[a-zA-Z0-9]*_?$
-
-# Regular expression which should only match correct variable names
-variable-rgx=([a-z_]+[a-zA-Z0-9]*_*[a-zA-Z0-9]*_*[a-zA-Z0-9]*_?||(__.*__))$||[A-Z]
-
-# Regular expression which should only match correct module level names
-# Default: (([A-Z_][A-Z1-9_]*)|(__.*__))$
-const-rgx=([a-z_]+[a-zA-Z0-9]*_*[a-zA-Z0-9]*_*[a-zA-Z0-9]*_?|__.*__)$||[A-Z]

.travis.yml

@@ -1,81 +0,0 @@
-# vim ft=yaml
-# travis-ci.org definition for Fail2Ban build
-# https://travis-ci.org/fail2ban/fail2ban/
-
-#os: linux
-
-language: python
-dist: xenial
-
-matrix:
-  fast_finish: true
-  include:
-  - python: 2.7
-  #- python: pypy
-  - python:  3.4
-  - python:  3.5
-  - python:  3.6
-  - python:  3.7
-  - python:  3.8
-  - python:  3.9-dev
-  - python:  pypy3.5
-before_install:
-  - echo "running under $TRAVIS_PYTHON_VERSION"
-  - if [[ $TRAVIS_PYTHON_VERSION == 2* || $TRAVIS_PYTHON_VERSION == pypy* && $TRAVIS_PYTHON_VERSION != pypy3* ]]; then export F2B_PY=2; fi
-  - if [[ $TRAVIS_PYTHON_VERSION == 3* || $TRAVIS_PYTHON_VERSION == pypy3* ]]; then export F2B_PY=3; fi
-  - echo "Set F2B_PY=$F2B_PY"
-  - travis_retry sudo apt-get update -qq
-  # Set this so sudo executes the correct python binary
-  #   Anything not using sudo will already have the correct environment
-  - export VENV_BIN="$VIRTUAL_ENV/bin" && echo "VENV_BIN set to $VENV_BIN"
-install:
-  # Install Python packages / dependencies
-  #   coverage
-  - travis_retry pip install coverage
-  #   coveralls (note coveralls doesn't support 2.6 now):
-  - if [[ $TRAVIS_PYTHON_VERSION != 2.6* ]]; then F2B_COV=1; else F2B_COV=0; fi
-  - if [[ "$F2B_COV" = 1 ]]; then travis_retry pip install coveralls; fi
-  #   codecov:
-  - travis_retry pip install codecov
-  #   dnspython or dnspython3
-  - if [[ "$F2B_PY" = 2 ]]; then travis_retry pip install dnspython || echo 'not installed'; fi
-  - if [[ "$F2B_PY" = 3 ]]; then travis_retry pip install dnspython3 || echo 'not installed'; fi
-  #   python systemd bindings:
-  - if [[ "$F2B_PY" = 2 ]]; then travis_retry sudo apt-get install -qq python-systemd || echo 'not installed'; fi
-  - if [[ "$F2B_PY" = 3 ]]; then travis_retry sudo apt-get install -qq python3-systemd || echo 'not installed'; fi
-  #   gamin - install manually (not in PyPI) - travis-ci system Python is 2.7
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then (travis_retry sudo apt-get install -qq python-gamin && cp /usr/share/pyshared/gamin.py /usr/lib/pyshared/python2.7/_gamin.so $VIRTUAL_ENV/lib/python2.7/site-packages/) || echo 'not installed'; fi
-  #   pyinotify
-  - travis_retry pip install pyinotify || echo 'not installed'
-  # Install helper tools
-  - sudo apt-get install shellcheck
-before_script:
-  # Manually execute 2to3 for now
-  - if [[ "$F2B_PY" = 3 ]]; then ./fail2ban-2to3; fi
-  # (debug) output current preferred encoding:
-  - python -c 'import locale, sys; from fail2ban.helpers import PREFER_ENC; print(PREFER_ENC, locale.getpreferredencoding(), (sys.stdout and sys.stdout.encoding))'
-script:
-  # Keep the legacy setup.py test approach of checking coverage for python2
-  - if [[ "$F2B_PY" = 2 ]]; then coverage run setup.py test; fi
-  # Coverage doesn't pick up setup.py test with python3, so run it directly (with same verbosity as from setup)
-  - if [[ "$F2B_PY" = 3 ]]; then coverage run bin/fail2ban-testcases --verbosity=2; fi
-  # Use $VENV_BIN (not python) or else sudo will always run the system's python (2.7)
-  - sudo $VENV_BIN/pip install .
-  # Doc files should get installed on Travis under Linux (some builds/python's seem to use another path segment)
-  - test -e /usr/share/doc/fail2ban/FILTERS && echo 'found' || echo 'not found'
-  # Test initd script
-  - shellcheck -s bash -e SC1090,SC1091 files/debian-initd
-after_success:
-  - if [[ "$F2B_COV" = 1 ]]; then coveralls; fi
-  - codecov
-
-# Might be worth looking into
-#notifications:
-#  email: true
-#  irc:
-#    channels: "irc.freenode.org#fail2ban"
-#    template:
-#      - "%{repository}@%{branch}: %{message} (%{build_url})"
-#    on_success: change
-#    on_failure: change
-#    skip_join: true

CONTRIBUTING.md

@@ -1,27 +0,0 @@
-Guidelines on Fail2Ban contributions
-====================================
-
-### You found a severe security vulnerability in Fail2Ban?
-email details to fail2ban-vulnerabilities at lists dot sourceforge dot net .
-
-### You need some new features, you found bugs?
-visit [Issues](https://github.com/fail2ban/fail2ban/issues)
-and if your issue is not yet known -- file a bug report. See
-[Fail2Ban wiki](http://www.fail2ban.org/wiki/index.php/HOWTO_Seek_Help)
-on further instructions.
-
-### You would like to troubleshoot or discuss?
-join the [mailing list](https://lists.sourceforge.net/lists/listinfo/fail2ban-users)
-
-### You would like to contribute (new filters/actions/code/documentation)?
-send a [pull request](https://github.com/fail2ban/fail2ban/pulls)
-
-Pull requests guidelines
-========================
-
-- If there is an issue on github to be closed by the pull request, include
-  ```Closes #ISSUE``` (where ISSUE is issue's number)
-  
-- Add a brief summary of the change to the ChangeLog file into a corresponding
-  section out of Fixes, New Features or Enhancements (improvements to existing
-  features)

DEVELOP

@@ -1,299 +0,0 @@
-..                       __      _ _ ___ _
-                        / _|__ _(_) |_  ) |__  __ _ _ _
-                       |  _/ _` | | |/ /| '_ \/ _` | ' \
-                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
-
-================================================================================
-How to develop for Fail2Ban
-================================================================================
-
-Fail2Ban uses GIT (http://git-scm.com/) distributed source control. This gives
-each developer their own complete copy of the entire repository. Developers can
-add and switch branches and commit changes when ever they want and then ask a
-maintainer to merge their changes.
-
-Fail2Ban uses GitHub (https://github.com/fail2ban/fail2ban) to manage access to
-the Git repository. GitHub provides free hosting for open-source projects as
-well as a web-based Git repository browser and an issue tracker.
-
-If you are familiar with Python and you have a bug fix or a feature that you
-would like to add to Fail2Ban, the best way to do so it to use the GitHub Pull
-Request feature. You can find more details on the Fail2Ban wiki
-(http://www.fail2ban.org/wiki/index.php/Get_Involved)
-
-Pull Requests
-=============
-
-When submitting pull requests on GitHub we ask you to:
-
-* Clearly describe the problem you're solving;
-* Don't introduce regressions that will make it hard for systems administrators
-  to update;
-* If adding a major feature rebase your changes on master and get to a single commit;
-* Include test cases (see below);
-* Include sample logs (if relevant);
-* Include a change to the relevant section of the ChangeLog; and
-* Include yourself in THANKS if not already there.
-
-If you are developing filters see the FILTERS file for documentation.
-
-Code Testing
-============
-
-Existing tests can be run by executing `bin/fail2ban-testcases`. It has
-options like --log-level that will probably be useful.  Run
-`bin/fail2ban-testcases --help` for the full list of options.
-
-Test cases should cover all usual cases, all exception cases and all inside
-/ outside boundary conditions.
-
-Test cases should cover all branches. The coverage tool will help identify
-missing branches. Also see http://nedbatchelder.com/code/coverage/branch.html
-for more details.
-
-Install the package python-coverage to visualise your test coverage. Run the
-following (note: on Debian-based systems, the script is called
-`python-coverage`)::
-
-  coverage run bin/fail2ban-testcases
-  coverage report
-
-Optionally:
-  coverage html
-
-And then browse htmlcov/index.html and see how much coverage your test cases
-exert over the code base. Full coverage is a good thing however it may not be
-complete. Try to ensure tests cover as many independent paths through the
-code.
-
-Manual Execution. To run in a development environment do::
-
-  ./fail2ban-client -c config/ -s /tmp/f2b.sock -i start
-
-some quick commands::
-
-  status
-  add test pyinotify
-  status test
-  set test addaction iptables
-  set test actionban iptables echo <ip> <cidr> >> /tmp/ban
-  set test actionunban iptables echo <ip> <cidr> >> /tmp/unban
-  get test actionban iptables
-  get test actionunban iptables
-  set test banip 192.168.2.2
-  status test
-
-
-Testing with vagrant
---------------------
-
-Testing can now be done inside a vagrant VM.  Vagrantfile provided in
-source code repository established two VMs:
-
-- VM "secure" which can be used for testing fail2ban code.
-- VM "attacker" which can be used to perform attack against our "secure" VM.
-
-Both VMs are sharing the 192.168.200/24 network. If you are using this network
-take a look into the Vagrantfile and change the IP.
-
-
-Coding Standards
-================
-
-Style
------
-
-Please use tabs for now. Keep to 80 columns, at least for readable text.
-
-Tests
------
-
-Add tests. They should test all the code you add in a meaning way.
-
-Coverage
---------
-
-Test coverage should always increase as you add code.
-
-You may use "# pragma: no cover" in the code for branches of code that support
-older versions on python. For all other uses of "pragma: no cover" or
-"pragma: no branch" document the reason why its not covered. "I haven't written
-a test case" isn't a sufficient reason.
-
-pyflakes
---------
-
-pyflakes can be used to find unused imports, and unused, undefined and
-redefined variables. pyflakes should be run in any python code, including
-python based actions::
-
-  pyflakes bin/ config/ fail2ban/
-
-Documentation
--------------
-
-Ensure this documentation is up to date after changes. Also ensure that the man
-pages still are accurate. Ensure that there is sufficient documentation for
-your new features to be used.
-
-Bugs
-----
-
-Remove them and don't add any more.
-
-Git
----
-
-Use the following tags in your commit messages:
-
-* 'BF:' for bug fixes
-* 'DOC:' for documentation fixes
-* 'ENH:' for enhancements
-* 'TST:' for commits concerning tests only (thus not touching the main code-base)
-
-Multiple tags could be joined with +, e.g. "BF+TST:".
-
-Use the text "closes #333"/"resolves #333 "/"fixes #333" where 333 represents
-an issue that is closed. Other text and details in link below.
-See: https://help.github.com/articles/closing-issues-via-commit-messages
-
-If merge resulted in conflicts, clarify what changes were done to
-corresponding files in the 'Conflicts:' section of the merge commit
-message.  See e.g. https://github.com/fail2ban/fail2ban/commit/f5a8a8ac
-
-Adding Actions
---------------
-
-If you add an action.d/*.conf file also add a example in config/jail.conf
-with enabled=false and maxretry=5 for ssh.
-
-
-Design
-======
-
-Fail2Ban was initially developed with Python 2.3 (IIRC). It should
-still be compatible with Python 2.4 and such compatibility assurance
-makes code ... old-fashioned in many places (RF-Note).  In 0.7 the
-design went through major re-factoring into client/server,
-a-thread-per-jail design which made it a bit difficult to follow.
-Below you can find a sketchy description of the main components of the
-system to orient yourself better.
-
-server/
-------
-
-Core classes hierarchy (feel welcome to draw a better/more complete
-one)::
-
- ->   inheritance
- +    delegation
- *    storage of multiple instances
-
- RF-Note   just a note which might be useful to address while doing RF
-
- JailThread -> Filter -> FileFilter -> {FilterPoll, FilterPyinotify, ...}
-               |         * FileContainer
-               + FailManager
-               + DateDetector
-			   + Jail (provided in __init__) which contains this Filter
-                 (used for passing tickets from FailManager to Jail's __queue)
- Server
-   + Jails
-      * Jail
-        + Filter  (in __filter)
-        * tickets (in __queue)
-        + Actions (in __action)
-          * Action
-          + BanManager
-
-
-failmanager.py
-~~~~~~~~~~~~~~
-
-FailManager
-
-  Keeps track of failures, recorded as 'tickets'.  All operations are
-  done via acquiring a lock
-
-FailManagerEmpty(Exception)
-
-  raised by FailManager.toBan after reaching the list of tickets
-  (RF-Note: asks to become a generator ;) )
-
-
-filter.py
-~~~~~~~~~~
-
-Filter(JailThread)
-
-  Wraps (non-threaded) FailManager (and proxies to it quite a bit),
-  and provides all primary logic for processing new lines, what IPs to
-  ignore, etc
-
-  .failManager  [FailManager]
-  .dateDetector [DateDetector]
-  .__failRegex  [list]
-  .__ignoreRegex [list]
-    Contains regular expressions for failures and ignores
-  .__findTime   [numeric]
-    Used in `processLineAndAdd` to skip old lines
-
-FileFilter(Filter):
-
-  Files-aware Filter
-
-  .__logPath [list]
-    keeps the tracked files (added 1-by-1 using addLogPath)
-    stored as FileContainer's
-  .getFailures
-    actually just returns
-    True
-      if managed to open and get lines (until empty)
-    False
-      if failed to open or absent container matching the filename
-
-FileContainer
-
-  Adapter for a file to deal with log rotation.
-
-  .open,.close,.readline
-     RF-Note: readline returns "" with handler absent... shouldn't it be None?
-  .__pos
-    Keeps the position pointer
-
-
-ipdns.py
-~~~~~~~~
-
-DNSUtils
-
-  Utility class for DNS handling
-
-IPAddr
-
-  Object-class for IP address handling
-
-
-filter*.py
-~~~~~~~~~~
-
-Implementations of FileFilter's for specific backends.  Derived
-classes should provide an implementation of `run` and usually
-override `addLogPath`, `delLogPath` methods.  In run() method they all
-one way or another provide
-
-		try:
-			while True:
-				ticket = self.failManager.toBan()
-				self.jail.putFailTicket(ticket)
-		except FailManagerEmpty:
-			self.failManager.cleanup(MyTime.time())
-
-thus channelling "ban tickets" from their failManager to the
-corresponding jail.
-
-action.py
-~~~~~~~~~
-
-Takes care about executing start/check/ban/unban/stop commands
-

Dockerfile

@@ -1,7 +0,0 @@
-FROM python:3.10-slim
-
-WORKDIR /root
-COPY setup.py fail2ban config bin ./
-RUN python setup.py install
-
-ENTRYPOINT ["/bin/fail2ban-server"]

FILTERS

@@ -1,485 +0,0 @@
-..                       __      _ _ ___ _
-                        / _|__ _(_) |_  ) |__  __ _ _ _
-                       |  _/ _` | | |/ /| '_ \/ _` | ' \
-                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
-
-================================================================================
-Developing Filters
-================================================================================
-
-Filters are tricky. They need to:
-
-* work with a variety of the versions of the software that generates the logs;
-* work with the range of logging configuration options available in the
-  software;
-* work with multiple operating systems;
-* not make assumptions about the log format in excess of the software
-  (e.g. do not assume a username doesn't contain spaces and use \S+ unless
-  you've checked the source code);
-* account for how future versions of the software will log messages
-  (e.g. guess what would happen to the log message if different authentication
-  types are added);
-* not be susceptible to DoS vulnerabilities (see Filter Security below); and
-* match intended log lines only.
-
-Please follow the steps from Filter Test Cases to Developing Filter Regular
-Expressions and submit a GitHub pull request (PR) afterwards. If you get stuck,
-you can push your unfinished changes and still submit a PR -- describe
-what you have done, what is the hurdle, and we'll attempt to help (PR
-will be automagically updated with future commits you would push to
-complete it).
-
-Filter Test Cases
-=================
-
-Purpose
--------
-
-Start by finding the log messages that the application generates related to
-some form of authentication failure. If you are adding to an existing filter
-think about whether the log messages are of a similar importance and purpose
-to the existing filter. If you were a user of Fail2Ban, and did a package
-update of Fail2Ban that started matching new log messages, would anything
-unexpected happen?  Would the bantime/findtime for the jail be appropriate for
-the new log messages?  If it doesn't, perhaps it needs to be in a separate
-filter definition, for example like exim filter aims at authentication failures
-and exim-spam at log messages related to spam.
-
-Even if it is a new filter you may consider separating the log messages into
-different filters based on purpose.
-
-Cause
------
-
-Are some of the log lines a result of the same action? For example, is a PAM
-failure log message, followed by an application specific failure message the
-result of the same user/script action?  If you add regular expressions for
-both you would end up with two failures for a single action.
-Therefore, select the most appropriate log message and document the other log
-message) with a test case not to match it and a description as to why you chose
-one over another.
-
-With the selected log lines consider what action has caused those log
-messages and whether they could have been generated by accident? Could
-the log message be occurring due to the first step towards the application
-asking for authentication? Could the log messages occur often? If some of
-these are true make a note of this in the jail.conf example that you provide.
-
-Samples
--------
-
-It is important to include log file samples so any future change in the regular
-expression will still work with the log lines you have identified.
-
-The sample log messages are provided in a file under testcases/files/logs/
-named identically as the corresponding filter (but without .conf extension).
-Each log line should be preceded by a line with failJSON metadata (so the logs
-lines are tested in the test suite) directly above the log line. If there is
-any specific information about the log message, such as version or an
-application configuration option that is needed for the message to occur,
-include this in a comment (line beginning with #) above the failJSON metadata.
-
-Log samples should include only one, definitely not more than 3, examples of
-log messages of the same form. If log messages are different in different
-versions of the application log messages that show this are encouraged.
-
-Also attempt to inject an IP into the application (e.g. by specifying
-it as a username) so that Fail2Ban possibly detects the IP
-from user input rather than the true origin. See the Filter Security section
-and the top example in testcases/files/logs/apache-auth as to how to do this.
-One you have discovered that this is possible, correct the regex so it doesn't
-match and provide this as a test case with "match": false (see failJSON below).
-
-If the mechanism to create the log message isn't obvious provide a
-configuration and/or sample scripts testcases/files/config/{filtername} and
-reference these in the comments above the log line.
-
-FailJSON metadata
------------------
-
-A failJSON metadata is a comment immediately above the log message. It will
-look like::
-
-  # failJSON: { "time": "2013-06-10T10:10:59", "match": true , "host": "93.184.216.119" }
-
-Time should match the time of the log message. It is in a specific format of
-Year-Month-Day'T'Hour:minute:Second.  If your log message does not include a
-year, like the example below, the year should be listed as 2005, if before Sun
-Aug 14 10am UTC, and 2004 if afterwards.  Here is an example failJSON
-line preceding a sample log line::
-
-  # failJSON: { "time": "2005-03-24T15:25:51", "match": true , "host": "198.51.100.87" }
-  Mar 24 15:25:51 buffalo1 dropbear[4092]: bad password attempt for 'root' from 198.51.100.87:5543
-
-The "host" in failJSON should contain the IP or domain that should be blocked.
-
-For long lines that you do not want to be matched (e.g. from log injection
-attacks) and any log lines to be excluded (see "Cause" section above), set
-"match": false in the failJSON and describe the reason in the comment above.
-
-After developing regexes, the following command will test all failJSON metadata
-against the log lines in all sample log files::
-
-  ./fail2ban-testcases testSampleRegex
-
-Developing Filter Regular Expressions
-=====================================
-
-Date/Time
----------
-
-At the moment, Fail2Ban depends on log lines to have time stamps.  That is why
-before starting to develop failregex, check if your log line format known to
-Fail2Ban.  Copy the time component from the log line and append an IP address to
-test with following command::
-
-  ./fail2ban-regex "2013-09-19 02:46:12 1.2.3.4" "<HOST>"
-
-Output of such command should contain something like::
-
-  Date template hits:
-  |- [# of hits] date format
-  |  [1] Year-Month-Day Hour:Minute:Second
-
-Ensure that the template description matches time/date elements in your log line
-time stamp.  If there is no matched format then date template needs to be added
-to server/datedetector.py.  Ensure that a new template is added in the order
-that more specific matches occur first and that there is no confusion between a
-Day and a Month.
-
-Filter file
------------
-
-The filter is specified in a config/filter.d/{filtername}.conf file. Filter file
-can have sections INCLUDES (optional) and Definition as follows::
-
-  [INCLUDES]
-  
-  before = common.conf
-  
-  after = filtername.local
-  
-  [Definition]
-  
-  failregex = ....
-  
-  ignoreregex = ....
-
-This is also documented in the man page jail.conf (section 5). Other definitions
-can be added to make failregex's more readable and maintainable to be used
-through string Interpolations (see http://docs.python.org/2.7/library/configparser.html)
-
-
-General rules
--------------
-
-Use "before" if you need to include a common set of rules, like syslog or if
-there is a common set of regexes for multiple filters.
-
-Use "after" if you wish to allow the user to overwrite a set of customisations
-of the current filter. This file doesn't need to exist.
-
-Try to avoid using ignoreregex mainly for performance reasons. The case when you
-would use it is if in trying to avoid using it, you end up with an unreadable
-failregex.
-
-Syslog
-------
-
-If your application logs to syslog you can take advantage of log line prefix
-definitions present in common.conf.  So as a base use::
-
-  [INCLUDES]
-  
-  before = common.conf
-  
-  [Definition]
-  
-  _daemon = app
-  
-  failregex = ^%(__prefix_line)s
-
-In this example common.conf defines __prefix_line which also contains the
-_daemon name (in syslog terms the service) you have just specified. _daemon
-can also be a regex.
-
-For example, to capture following line _daemon should be set to "dovecot"::
-
-  Dec 12 11:19:11 dunnart dovecot: pop3-login: Aborted login (tried to use disabled plaintext auth): rip=190.210.136.21, lip=113.212.99.193
-
-and then ``^%(__prefix_line)s`` would match "Dec 12 11:19:11 dunnart dovecot:
-". Note it matches the trailing space(s) as well.
-
-Substitutions (AKA string interpolations)
------------------------------------------
-
-We have used string interpolations in above examples.  They are useful for
-making the regexes more readable, reuse generic patterns in multiple failregex
-lines, and also to refer definition of regex parts to specific filters or even
-to the user.  General principle is that value of a _name variable replaces
-occurrences of %(_name)s within the same section or anywhere in the config file
-if defined in [DEFAULT] section.
-
-Regular Expressions
--------------------
-
-Regular expressions (failregex, ignoreregex) assume that the date/time has been
-removed from the log line (this is just how fail2ban works internally ATM).
-
-If the format is like '<date...> error 1.2.3.4 is evil' then you need to match
-the <> at the start so regex should be similar to '^<> error <HOST> is evil$' using
-<HOST> where the IP/domain name appears in the log line.
-
-The following general rules apply to regular expressions:
-
-* ensure regexes start with a ^ and are as restrictive as possible. E.g. do not
-  use .* if \d+ is sufficient;
-* use functionality of Python regexes defined in the standard Python re library
-  http://docs.python.org/2/library/re.html;
-* make regular expressions readable (as much as possible). E.g.
-  (?:...) represents a non-capturing regex but (...) is more readable, thus
-  preferred.
-
-If you have only a basic knowledge of regular repressions we advise to read
-http://docs.python.org/2/library/re.html first.  It doesn't take long and would
-remind you e.g. which characters you need to escape and which you don't.
-
-Developing/testing a regex
---------------------------
-
-You can develop a regex in a file or using command line depending on your
-preference. You can also use samples you have already created in the test cases
-or test them one at a time.
-
-The general tool for testing Fail2Ban regexes is fail2ban-regex. To see how to
-use it run::
-
-  ./fail2ban-regex --help
-
-Take note of  -l heavydebug  / -l debug  and -v as they might be very useful.
-
-.. TIP::
-     Take a look at the source code of the application you are developing
-     failregex for. You may see optional or extra log messages, or parts there
-     of, that need to form part of your regex.  It may also reveal how some
-     parts are constrained and different formats depending on configuration or
-     less common usages.
-
-.. TIP::
-     For looking through source code - http://sourcecodebrowser.com/ . It has
-     call graphs and can browse different versions.
-
-.. TIP::
-     Some applications log spaces at the end. If you are not sure add \s*$ as
-     the end part of the regex.
-
-If your regex is not matching, http://www.debuggex.com/?flavor=python can help
-to tune it.  fail2ban-regex -D ...  will present Debuggex URLs for the regexs
-and sample log files that you pass into it.
-
-In general use when using regex debuggers for generating fail2ban filters:
-
-* use regex from the ./fail2ban-regex output (to ensure all substitutions are
-done)
-* replace <HOST> with (?&.ipv4)
-* make sure that regex type set to Python
-* for the test data put your log output with the date/time removed
-
-When you have fixed the regex put it back into your filter file.
-
-Please spread the good word about Debuggex - Serge Toarca is kindly continuing
-its free availability to Open Source developers.
-
-Finishing up
-------------
-
-If you've added a new filter, add a new entry in config/jail.conf. The theory
-here is that a user will create a jail.local with [filtername]\nenable=true to
-enable your jail.
-
-So more specifically in the [filter] section in jail.conf:
-
-* ensure that you have "enabled = false" (users will enable as needed);
-* use "filter =" set to your filter name;
-* use a typical action to disable ports associated with the application;
-* set "logpath" to the usual location of application log file;
-* if the default findtime or bantime isn't appropriate to the filter, specify
-  more appropriate choices (possibly with a brief comment line).
-
-Submit github pull request (See "Pull Requests" above) for
-github.com/fail2ban/fail2ban containing your great work.
-
-Filter Security
-===============
-
-Poor filter regular expressions are susceptible to DoS attacks.
-
-When a remote user has the ability to introduce text that would match filter's
-failregex, while matching inserted text to the <HOST> part, they have the
-ability to deny any host they choose.
-
-So the <HOST> part must be anchored on text generated by the application, and
-not the user, to an extent sufficient to prevent user inserting the entire text
-matching this or any other failregex.
-
-Ideally filter regex should anchor at the beginning and at the end of log line.
-However as more applications log at the beginning than the end, anchoring the
-beginning is more important. If the log file used by the application is shared
-with other applications, like system logs, ensure the other application that use
-that log file do not log user generated text at the beginning of the line, or,
-if they do, ensure the regexes of the filter are sufficient to mitigate the risk
-of insertion.
-
-
-Examples of poor filters
-------------------------
-
-1. Too restrictive
-
-We find a log message::
-
-    Apr-07-13 07:08:36 Invalid command fial2ban from 1.2.3.4
-
-We make a failregex::
-
-    ^Invalid command \S+ from <HOST>
-
-Now think evil. The user does the command 'blah from 1.2.3.44'
-
-The program diligently logs::
-
-    Apr-07-13 07:08:36 Invalid command blah from 1.2.3.44 from 1.2.3.4
-
-And fail2ban matches 1.2.3.44 as the IP that it ban. A DoS attack was successful.
-
-The fix here is that the command can be anything so .* is appropriate::
-
-    ^Invalid command .* from <HOST>
-
-Here the .* will match until the end of the string. Then realise it has more to
-match, i.e. "from <HOST>" and go back until it find this. Then it will ban
-1.2.3.4 correctly. Since the <HOST> is always at the end, end the regex with a $::
-
-    ^Invalid command .* from <HOST>$
-
-Note if we'd just had the expression::
-
-    ^Invalid command \S+ from <HOST>$
-
-Then provided the user put a space in their command they would have never been
-banned.
-
-2. Unanchored regex can match other user injected data
-
-From the Apache vulnerability CVE-2013-2178
-( original ref: https://vndh.net/note:fail2ban-089-denial-service ).
-
-An example bad regex for Apache::
-
-    failregex = [[]client <HOST>[]] user .* not found
-
-Since the user can do a get request on::
-
-    GET /[client%20192.168.0.1]%20user%20root%20not%20found HTTP/1.0
-    Host: remote.site
-
-Now the log line will be::
-
-    [Sat Jun 01 02:17:42 2013] [error] [client 192.168.33.1] File does not exist: /srv/http/site/[client 192.168.0.1] user root not found
-
-As this log line doesn't match other expressions hence it matches the above
-regex and blocks 192.168.33.1 as a denial of service from the HTTP requester.
-
-3.  Over greedy pattern matching
-
-From: https://github.com/fail2ban/fail2ban/pull/426
-
-An example ssh log (simplified)::
-
-    Sep 29 17:15:02 spaceman sshd[12946]: Failed password for user from 127.0.0.1 port 20000 ssh1: ruser remoteuser
-
-As we assume username can include anything including spaces its prudent to put
-.* here. The remote user can also exist as anything so lets not make assumptions again::
-
-    failregex = ^%(__prefix_line)sFailed \S+ for .* from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$
-
-So this works. The problem is if the .* after remote user is injected by the
-user to be 'from 1.2.3.4'. The resultant log line is::
-
-    Sep 29 17:15:02 spaceman sshd[12946]: Failed password for user from 127.0.0.1 port 20000 ssh1: ruser from 1.2.3.4
-
-Testing with::
-
-    fail2ban-regex -v 'Sep 29 17:15:02 Failed password for user from 127.0.0.1 port 20000 ssh1: ruser from 1.2.3.4' '^ Failed \S+ for .* from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$'
-
-.. TIP:: I've removed the bit that matches __prefix_line from the regex and log.
-
-Shows::
-
-    1) [1] ^ Failed \S+ for .* from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$
-       1.2.3.4  Sun Sep 29 17:15:02 2013
-
-It should of matched 127.0.0.1. So the first greedy part of the greedy regex
-matched until the end of the string. The was no "from <HOST>" so the regex
-engine worked backwards from the end of the string until this was matched.
-
-The result was that 1.2.3.4 was matched, injected by the user, and the wrong IP
-was banned.
-
-The solution here is to make the first .* non-greedy with .*?. Here it matches
-as little as required and the fail2ban-regex tool shows the output::
-
-    fail2ban-regex -v 'Sep 29 17:15:02 Failed password for user from 127.0.0.1 port 20000 ssh1: ruser from 1.2.3.4' '^ Failed \S+ for .*? from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$'
-
-    1) [1] ^ Failed \S+ for .*? from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$
-       127.0.0.1  Sun Sep 29 17:15:02 2013
-
-So the general case here is a log line that contains::
-
-    (fixed_data_1)<HOST>(fixed_data_2)(user_injectable_data)
-
-Where the regex that matches fixed_data_1 is gready and matches the entire
-string, before moving backwards and user_injectable_data can match the entire
-string.
-
-Another case
-------------
-
-ref: https://www.debuggex.com/r/CtAbeKMa2sDBEfA2/0
-
-A webserver logs the following without URL escaping::
-
-    [error] 2865#0: *66647 user "xyz" was not found in "/file", client: 1.2.3.1, server: www.host.com, request: "GET ", client: 3.2.1.1, server: fake.com, request: "GET exploited HTTP/3.3", host: "injected.host", host: "www.myhost.com"
-
-regex::
-
-    failregex = ^ \[error\] \d+#\d+: \*\d+ user "\S+":? (?:password mismatch|was not found in ".*"), client: <HOST>, server: \S+, request: "\S+ .+ HTTP/\d+\.\d+", host: "\S+"
-
-The .* matches to the end of the string. Finds that it can't continue to match
-", client ... so it moves from the back and find that the user injected web URL::
-
-    ", client: 3.2.1.1, server: fake.com, request: "GET exploited HTTP/3.3", host: "injected.host
-
-In this case there is a fixed host: "www.myhost.com" at the end so the solution
-is to anchor the regex at the end with a $.
-
-If this wasn't the case then first .* needed to be made so it didn't capture
-beyond <HOST>.
-
-4. Application generates two identical log messages with different meanings
-
-If the application generates the following two messages under different
-circumstances::
-
-    client <IP>: authentication failed
-    client <USER>: authentication failed
-
-
-Then it's obvious that a regex of ``^client <HOST>: authentication
-failed$`` will still cause problems if the user can trigger the second
-log message with a <USER> of 123.1.1.1.
-
-Here there's nothing to do except request/change the application so it logs
-messages differently.
-
-

MANIFEST

@@ -1,433 +1,126 @@
-bin/fail2ban-client
-bin/fail2ban-regex
-bin/fail2ban-server
-bin/fail2ban-testcases
+README
 ChangeLog
-config/action.d/apprise.conf
-config/action.d/abuseipdb.conf
-config/action.d/apf.conf
-config/action.d/blocklist_de.conf
-config/action.d/bsd-ipfw.conf
-config/action.d/cloudflare.conf
-config/action.d/complain.conf
-config/action.d/dshield.conf
-config/action.d/dummy.conf
-config/action.d/firewallcmd-allports.conf
-config/action.d/firewallcmd-common.conf
-config/action.d/firewallcmd-ipset.conf
-config/action.d/firewallcmd-multiport.conf
-config/action.d/firewallcmd-new.conf
-config/action.d/firewallcmd-rich-logging.conf
-config/action.d/firewallcmd-rich-rules.conf
-config/action.d/helpers-common.conf
-config/action.d/hostsdeny.conf
-config/action.d/ipfilter.conf
-config/action.d/ipfw.conf
-config/action.d/iptables-allports.conf
-config/action.d/iptables-common.conf
-config/action.d/iptables.conf
-config/action.d/iptables-ipset-proto4.conf
-config/action.d/iptables-ipset-proto6-allports.conf
-config/action.d/iptables-ipset-proto6.conf
-config/action.d/iptables-multiport.conf
-config/action.d/iptables-multiport-log.conf
-config/action.d/iptables-new.conf
-config/action.d/iptables-xt_recent-echo.conf
-config/action.d/mail-buffered.conf
-config/action.d/mail.conf
-config/action.d/mail-whois-common.conf
-config/action.d/mail-whois.conf
-config/action.d/mail-whois-lines.conf
-config/action.d/mynetwatchman.conf
-config/action.d/netscaler.conf
-config/action.d/nftables-allports.conf
-config/action.d/nftables.conf
-config/action.d/nftables-multiport.conf
-config/action.d/nginx-block-map.conf
-config/action.d/npf.conf
-config/action.d/nsupdate.conf
-config/action.d/osx-afctl.conf
-config/action.d/osx-ipfw.conf
-config/action.d/pf.conf
-config/action.d/route.conf
-config/action.d/sendmail-buffered.conf
-config/action.d/sendmail-common.conf
-config/action.d/sendmail.conf
-config/action.d/sendmail-geoip-lines.conf
-config/action.d/sendmail-whois.conf
-config/action.d/sendmail-whois-ipjailmatches.conf
-config/action.d/sendmail-whois-ipmatches.conf
-config/action.d/sendmail-whois-lines.conf
-config/action.d/sendmail-whois-matches.conf
-config/action.d/shorewall.conf
-config/action.d/shorewall-ipset-proto6.conf
-config/action.d/smtp.py
-config/action.d/symbiosis-blacklist-allports.conf
-config/action.d/ufw.conf
-config/action.d/xarf-login-attack.conf
-config/fail2ban.conf
-config/filter.d/3proxy.conf
+TODO
+COPYING
+fail2ban-client
+fail2ban-server
+fail2ban-testcases
+fail2ban-regex
+client/configreader.py
+client/configparserinc.py
+client/jailreader.py
+client/fail2banreader.py
+client/jailsreader.py
+client/beautifier.py
+client/filterreader.py
+client/actionreader.py
+client/__init__.py
+client/configurator.py
+client/csocket.py
+server/asyncserver.py
+server/filter.py
+server/filtergamin.py
+server/filterpoll.py
+server/iso8601.py
+server/server.py
+server/actions.py
+server/faildata.py
+server/failmanager.py
+server/datedetector.py
+server/jailthread.py
+server/transmitter.py
+server/action.py
+server/ticket.py
+server/jail.py
+server/jails.py
+server/__init__.py
+server/banmanager.py
+server/datetemplate.py
+server/mytime.py
+server/failregex.py
+testcases/banmanagertestcase.py
+testcases/failmanagertestcase.py
+testcases/clientreadertestcase.py
+testcases/filtertestcase.py
+testcases/__init__.py
+testcases/datedetectortestcase.py
+testcases/actiontestcase.py
+testcases/servertestcase.py
+testcases/files/testcase01.log
+testcases/files/testcase02.log
+testcases/files/testcase03.log
+testcases/files/testcase04.log
+setup.py
+setup.cfg
+common/__init__.py
+common/helpers.py
+common/version.py
+common/protocol.py
+config/jail.conf
+config/filter.d/common.conf
 config/filter.d/apache-auth.conf
 config/filter.d/apache-badbots.conf
-config/filter.d/apache-botsearch.conf
-config/filter.d/apache-common.conf
-config/filter.d/apache-fakegooglebot.conf
-config/filter.d/apache-modsecurity.conf
 config/filter.d/apache-nohome.conf
 config/filter.d/apache-noscript.conf
 config/filter.d/apache-overflows.conf
-config/filter.d/apache-pass.conf
-config/filter.d/apache-shellshock.conf
-config/filter.d/assp.conf
-config/filter.d/asterisk.conf
-config/filter.d/bitwarden.conf
-config/filter.d/botsearch-common.conf
-config/filter.d/centreon.conf
-config/filter.d/common.conf
-config/filter.d/counter-strike.conf
-config/filter.d/courier-auth.conf
-config/filter.d/courier-smtp.conf
+config/filter.d/courierlogin.conf
+config/filter.d/couriersmtp.conf
 config/filter.d/cyrus-imap.conf
-config/filter.d/directadmin.conf
-config/filter.d/domino-smtp.conf
-config/filter.d/dovecot.conf
-config/filter.d/dropbear.conf
-config/filter.d/drupal-auth.conf
-config/filter.d/ejabberd-auth.conf
-config/filter.d/exim-common.conf
 config/filter.d/exim.conf
-config/filter.d/exim-spam.conf
-config/filter.d/freeswitch.conf
-config/filter.d/froxlor-auth.conf
-config/filter.d/gitlab.conf
-config/filter.d/grafana.conf
-config/filter.d/groupoffice.conf
 config/filter.d/gssftpd.conf
-config/filter.d/guacamole.conf
-config/filter.d/haproxy-http-auth.conf
-config/filter.d/horde.conf
-config/filter.d/ignorecommands/apache-fakegooglebot
-config/filter.d/kerio.conf
-config/filter.d/lighttpd-auth.conf
-config/filter.d/mongodb-auth.conf
-config/filter.d/monit.conf
-config/filter.d/murmur.conf
-config/filter.d/mysqld-auth.conf
-config/filter.d/nagios.conf
+config/filter.d/lighttpd-fastcgi.conf
 config/filter.d/named-refused.conf
-config/filter.d/nginx-botsearch.conf
-config/filter.d/nginx-http-auth.conf
-config/filter.d/nginx-limit-req.conf
-config/filter.d/nsd.conf
-config/filter.d/openhab.conf
-config/filter.d/openwebmail.conf
-config/filter.d/oracleims.conf
-config/filter.d/pam-generic.conf
-config/filter.d/perdition.conf
-config/filter.d/phpmyadmin-syslog.conf
-config/filter.d/php-url-fopen.conf
-config/filter.d/portsentry.conf
 config/filter.d/postfix.conf
 config/filter.d/proftpd.conf
 config/filter.d/pure-ftpd.conf
 config/filter.d/qmail.conf
-config/filter.d/recidive.conf
-config/filter.d/roundcube-auth.conf
-config/filter.d/screensharingd.conf
-config/filter.d/selinux-common.conf
-config/filter.d/selinux-ssh.conf
-config/filter.d/sendmail-auth.conf
-config/filter.d/sendmail-reject.conf
+config/filter.d/pam-generic.conf
+config/filter.d/php-url-fopen.conf
+config/filter.d/sasl.conf
 config/filter.d/sieve.conf
-config/filter.d/slapd.conf
-config/filter.d/softethervpn.conf
-config/filter.d/sogo-auth.conf
-config/filter.d/solid-pop3d.conf
-config/filter.d/squid.conf
-config/filter.d/squirrelmail.conf
 config/filter.d/sshd.conf
-config/filter.d/stunnel.conf
-config/filter.d/suhosin.conf
-config/filter.d/tine20.conf
-config/filter.d/traefik-auth.conf
-config/filter.d/uwimap-auth.conf
+config/filter.d/sshd-ddos.conf
 config/filter.d/vsftpd.conf
 config/filter.d/webmin-auth.conf
 config/filter.d/wuftpd.conf
 config/filter.d/xinetd-fail.conf
-config/filter.d/znc-adminlog.conf
-config/filter.d/zoneminder.conf
-config/jail.conf
-config/paths-arch.conf
-config/paths-common.conf
-config/paths-debian.conf
-config/paths-fedora.conf
-config/paths-freebsd.conf
-config/paths-opensuse.conf
-config/paths-osx.conf
-CONTRIBUTING.md
-COPYING
-.coveragerc
-DEVELOP
-fail2ban-2to3
-fail2ban/client/actionreader.py
-fail2ban/client/beautifier.py
-fail2ban/client/configparserinc.py
-fail2ban/client/configreader.py
-fail2ban/client/configurator.py
-fail2ban/client/csocket.py
-fail2ban/client/fail2banclient.py
-fail2ban/client/fail2bancmdline.py
-fail2ban/client/fail2banreader.py
-fail2ban/client/fail2banregex.py
-fail2ban/client/fail2banserver.py
-fail2ban/client/filterreader.py
-fail2ban/client/__init__.py
-fail2ban/client/jailreader.py
-fail2ban/client/jailsreader.py
-fail2ban/exceptions.py
-fail2ban/helpers.py
-fail2ban/__init__.py
-fail2ban/protocol.py
-fail2ban/server/action.py
-fail2ban/server/actions.py
-fail2ban/server/asyncserver.py
-fail2ban/server/banmanager.py
-fail2ban/server/database.py
-fail2ban/server/datedetector.py
-fail2ban/server/datetemplate.py
-fail2ban/server/failmanager.py
-fail2ban/server/failregex.py
-fail2ban/server/filtergamin.py
-fail2ban/server/filterpoll.py
-fail2ban/server/filter.py
-fail2ban/server/filterpyinotify.py
-fail2ban/server/filtersystemd.py
-fail2ban/server/__init__.py
-fail2ban/server/ipdns.py
-fail2ban/server/jail.py
-fail2ban/server/jails.py
-fail2ban/server/jailthread.py
-fail2ban/server/mytime.py
-fail2ban/server/observer.py
-fail2ban/server/server.py
-fail2ban/server/strptime.py
-fail2ban/server/ticket.py
-fail2ban/server/transmitter.py
-fail2ban/server/utils.py
-fail2ban/setup.py
-fail2ban-testcases-all
-fail2ban-testcases-all-python3
-fail2ban/tests/action_d/__init__.py
-fail2ban/tests/action_d/test_smtp.py
-fail2ban/tests/actionstestcase.py
-fail2ban/tests/actiontestcase.py
-fail2ban/tests/banmanagertestcase.py
-fail2ban/tests/clientbeautifiertestcase.py
-fail2ban/tests/clientreadertestcase.py
-fail2ban/tests/config/action.d/action.conf
-fail2ban/tests/config/action.d/brokenaction.conf
-fail2ban/tests/config/fail2ban.conf
-fail2ban/tests/config/filter.d/checklogtype.conf
-fail2ban/tests/config/filter.d/checklogtype_test.conf
-fail2ban/tests/config/filter.d/simple.conf
-fail2ban/tests/config/filter.d/test.conf
-fail2ban/tests/config/filter.d/test.local
-fail2ban/tests/config/filter.d/zzz-generic-example.conf
-fail2ban/tests/config/filter.d/zzz-sshd-obsolete-multiline.conf
-fail2ban/tests/config/jail.conf
-fail2ban/tests/databasetestcase.py
-fail2ban/tests/datedetectortestcase.py
-fail2ban/tests/dummyjail.py
-fail2ban/tests/fail2banclienttestcase.py
-fail2ban/tests/fail2banregextestcase.py
-fail2ban/tests/failmanagertestcase.py
-fail2ban/tests/files/action.d/action_checkainfo.py
-fail2ban/tests/files/action.d/action_errors.py
-fail2ban/tests/files/action.d/action_modifyainfo.py
-fail2ban/tests/files/action.d/action_noAction.py
-fail2ban/tests/files/action.d/action_nomethod.py
-fail2ban/tests/files/action.d/action.py
-fail2ban/tests/files/config/apache-auth/basic/authz_owner/cant_get_me.html
-fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htaccess
-fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htpasswd
-fail2ban/tests/files/config/apache-auth/basic/file/.htaccess
-fail2ban/tests/files/config/apache-auth/basic/file/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest_anon/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_anon/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest/.htaccess
-fail2ban/tests/files/config/apache-auth/digest/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest.py
-fail2ban/tests/files/config/apache-auth/digest_time/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_time/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htpasswd
-fail2ban/tests/files/config/apache-auth/noentry/.htaccess
-fail2ban/tests/files/config/apache-auth/README
-fail2ban/tests/files/database_v1.db
-fail2ban/tests/files/database_v2.db
-fail2ban/tests/files/filter.d/substition.conf
-fail2ban/tests/files/filter.d/testcase01.conf
-fail2ban/tests/files/filter.d/testcase02.conf
-fail2ban/tests/files/filter.d/testcase02.local
-fail2ban/tests/files/filter.d/testcase-common.conf
-fail2ban/tests/files/ignorecommand.py
-fail2ban/tests/files/logs/3proxy
-fail2ban/tests/files/logs/apache-auth
-fail2ban/tests/files/logs/apache-badbots
-fail2ban/tests/files/logs/apache-botsearch
-fail2ban/tests/files/logs/apache-fakegooglebot
-fail2ban/tests/files/logs/apache-modsecurity
-fail2ban/tests/files/logs/apache-nohome
-fail2ban/tests/files/logs/apache-noscript
-fail2ban/tests/files/logs/apache-overflows
-fail2ban/tests/files/logs/apache-pass
-fail2ban/tests/files/logs/apache-shellshock
-fail2ban/tests/files/logs/assp
-fail2ban/tests/files/logs/asterisk
-fail2ban/tests/files/logs/bitwarden
-fail2ban/tests/files/logs/bsd/syslog-plain.txt
-fail2ban/tests/files/logs/bsd/syslog-v.txt
-fail2ban/tests/files/logs/bsd/syslog-vv.txt
-fail2ban/tests/files/logs/centreon
-fail2ban/tests/files/logs/counter-strike
-fail2ban/tests/files/logs/courier-auth
-fail2ban/tests/files/logs/courier-smtp
-fail2ban/tests/files/logs/cyrus-imap
-fail2ban/tests/files/logs/directadmin
-fail2ban/tests/files/logs/domino-smtp
-fail2ban/tests/files/logs/dovecot
-fail2ban/tests/files/logs/dropbear
-fail2ban/tests/files/logs/drupal-auth
-fail2ban/tests/files/logs/ejabberd-auth
-fail2ban/tests/files/logs/exim
-fail2ban/tests/files/logs/exim-spam
-fail2ban/tests/files/logs/freeswitch
-fail2ban/tests/files/logs/froxlor-auth
-fail2ban/tests/files/logs/gitlab
-fail2ban/tests/files/logs/grafana
-fail2ban/tests/files/logs/groupoffice
-fail2ban/tests/files/logs/gssftpd
-fail2ban/tests/files/logs/guacamole
-fail2ban/tests/files/logs/haproxy-http-auth
-fail2ban/tests/files/logs/horde
-fail2ban/tests/files/logs/kerio
-fail2ban/tests/files/logs/lighttpd-auth
-fail2ban/tests/files/logs/mongodb-auth
-fail2ban/tests/files/logs/monit
-fail2ban/tests/files/logs/murmur
-fail2ban/tests/files/logs/mysqld-auth
-fail2ban/tests/files/logs/nagios
-fail2ban/tests/files/logs/named-refused
-fail2ban/tests/files/logs/nginx-botsearch
-fail2ban/tests/files/logs/nginx-http-auth
-fail2ban/tests/files/logs/nginx-limit-req
-fail2ban/tests/files/logs/nsd
-fail2ban/tests/files/logs/openhab
-fail2ban/tests/files/logs/openwebmail
-fail2ban/tests/files/logs/oracleims
-fail2ban/tests/files/logs/pam-generic
-fail2ban/tests/files/logs/perdition
-fail2ban/tests/files/logs/phpmyadmin-syslog
-fail2ban/tests/files/logs/php-url-fopen
-fail2ban/tests/files/logs/portsentry
-fail2ban/tests/files/logs/postfix
-fail2ban/tests/files/logs/proftpd
-fail2ban/tests/files/logs/pure-ftpd
-fail2ban/tests/files/logs/qmail
-fail2ban/tests/files/logs/recidive
-fail2ban/tests/files/logs/roundcube-auth
-fail2ban/tests/files/logs/screensharingd
-fail2ban/tests/files/logs/selinux-ssh
-fail2ban/tests/files/logs/sendmail-auth
-fail2ban/tests/files/logs/sendmail-reject
-fail2ban/tests/files/logs/sieve
-fail2ban/tests/files/logs/slapd
-fail2ban/tests/files/logs/softethervpn
-fail2ban/tests/files/logs/sogo-auth
-fail2ban/tests/files/logs/solid-pop3d
-fail2ban/tests/files/logs/squid
-fail2ban/tests/files/logs/squirrelmail
-fail2ban/tests/files/logs/sshd
-fail2ban/tests/files/logs/sshd-journal
-fail2ban/tests/files/logs/stunnel
-fail2ban/tests/files/logs/suhosin
-fail2ban/tests/files/logs/tine20
-fail2ban/tests/files/logs/traefik-auth
-fail2ban/tests/files/logs/uwimap-auth
-fail2ban/tests/files/logs/vsftpd
-fail2ban/tests/files/logs/webmin-auth
-fail2ban/tests/files/logs/wuftpd
-fail2ban/tests/files/logs/xinetd-fail
-fail2ban/tests/files/logs/znc-adminlog
-fail2ban/tests/files/logs/zoneminder
-fail2ban/tests/files/logs/zzz-generic-example
-fail2ban/tests/files/logs/zzz-sshd-obsolete-multiline
-fail2ban/tests/files/testcase01a.log
-fail2ban/tests/files/testcase01.log
-fail2ban/tests/files/testcase02.log
-fail2ban/tests/files/testcase03.log
-fail2ban/tests/files/testcase04.log
-fail2ban/tests/files/testcase-journal.log
-fail2ban/tests/files/testcase-multiline.log
-fail2ban/tests/files/testcase-usedns.log
-fail2ban/tests/files/testcase-wrong-char.log
-fail2ban/tests/files/zzz-sshd-obsolete-multiline.log
-fail2ban/tests/filtertestcase.py
-fail2ban/tests/__init__.py
-fail2ban/tests/misctestcase.py
-fail2ban/tests/observertestcase.py
-fail2ban/tests/samplestestcase.py
-fail2ban/tests/servertestcase.py
-fail2ban/tests/sockettestcase.py
-fail2ban/tests/tickettestcase.py
-fail2ban/tests/utils.py
-fail2ban/version.py
-files/bash-completion
-files/cacti/cacti_host_template_fail2ban.xml
-files/cacti/fail2ban_stats.sh
-files/cacti/README
-files/debian-initd
-files/fail2ban-logrotate
-files/fail2ban.service.in
-files/fail2ban-tmpfiles.conf
-files/fail2ban.upstart
-files/gen_badbots
-files/gentoo-confd
+config/action.d/complain.conf
+config/action.d/dshield.conf
+config/action.d/hostsdeny.conf
+config/action.d/ipfw.conf
+config/action.d/ipfilter.conf
+config/action.d/iptables.conf
+config/action.d/iptables-allports.conf
+config/action.d/iptables-multiport.conf
+config/action.d/iptables-multiport-log.conf
+config/action.d/iptables-new.conf
+config/action.d/mail.conf
+config/action.d/mail-buffered.conf
+config/action.d/mail-whois.conf
+config/action.d/mail-whois-lines.conf
+config/action.d/mynetwatchman.conf
+config/action.d/sendmail.conf
+config/action.d/sendmail-buffered.conf
+config/action.d/sendmail-whois.conf
+config/action.d/sendmail-whois-lines.conf
+config/action.d/shorewall.conf
+config/fail2ban.conf
+man/fail2ban-client.1
+man/fail2ban-client.h2m
+man/fail2ban-server.1
+man/fail2ban-server.h2m
+man/fail2ban-regex.1
+man/fail2ban-regex.h2m
+man/generate-man
 files/gentoo-initd
-files/ipmasq-ZZZzzz_fail2ban.rul
-files/logwatch/fail2ban
-files/logwatch/fail2ban-0.8.log
-files/logwatch/fail2ban-0.9.log
-files/macosx-initd
-files/monit/fail2ban
-files/nagios/check_fail2ban
-files/nagios/README
+files/gentoo-confd
 files/redhat-initd
+files/macosx-initd
 files/solaris-fail2ban.xml
 files/solaris-svc-fail2ban
 files/suse-initd
-FILTERS
-kill-server
-man/fail2ban.1
-man/fail2ban-client.1
-man/fail2ban-client.h2m
-man/fail2ban-python.1
-man/fail2ban-python.h2m
-man/fail2ban-regex.1
-man/fail2ban-regex.h2m
-man/fail2ban-server.1
-man/fail2ban-server.h2m
-man/fail2ban-testcases.1
-man/fail2ban-testcases.h2m
-man/generate-man
-man/jail.conf.5
-.pylintrc
-README.md
-README.Solaris
-RELEASE
-setup.cfg
-setup.py
-THANKS
-TODO
-Vagrantfile
+files/cacti/fail2ban_stats.sh
+files/cacti/cacti_host_template_fail2ban.xml
+files/cacti/README
+files/nagios/check_fail2ban
+files/nagios/f2ban.txt

MANIFEST.in

@@ -1,5 +0,0 @@
-include ChangeLog COPYING DEVELOP FILTERS README.* THANKS TODO CONTRIBUTING* Vagrantfile
-graft doc
-graft files
-recursive-include config *.conf *.py
-recursive-include config/filter.d/ignorecommands *

Makefile

@@ -1,5 +0,0 @@
-setup:
-	docker-compose -f docker-compose.yml up --build -d
-clean:
-	docker-compose down
-	docker image rm fail2ban

README

@@ -0,0 +1,91 @@
+                         __      _ _ ___ _               
+                        / _|__ _(_) |_  ) |__  __ _ _ _  
+                       |  _/ _` | | |/ /| '_ \/ _` | ' \ 
+                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
+
+================================================================================
+Fail2Ban (version 0.8.4)                                              2009/09/07
+================================================================================
+
+Fail2Ban scans log files like /var/log/pwdfail and bans IP that makes too many
+password failures. It updates firewall rules to reject the IP address. These
+rules can be defined by the user. Fail2Ban can read multiple log files such as
+sshd or Apache web server ones.
+
+This README is a quick introduction to Fail2ban. More documentation, FAQ, HOWTOs
+are available on the project website: http://www.fail2ban.org
+
+Installation:
+-------------
+
+Required:
+   >=python-2.3 (http://www.python.org)
+
+Optional:
+   >=gamin-0.0.21 (http://www.gnome.org/~veillard/gamin)
+
+To install, just do:
+
+> tar xvfj fail2ban-0.8.4.tar.bz2
+> cd fail2ban-0.8.4
+> python setup.py install
+
+This will install Fail2Ban into /usr/share/fail2ban. The executable scripts are
+placed into /usr/bin.
+
+It is possible that Fail2ban is already packaged for your distribution. In this
+case, you should use it.
+
+Fail2Ban should be correctly installed now. Just type:
+
+> fail2ban-client -h
+
+to see if everything is alright. You should always use fail2ban-client and never
+call fail2ban-server directly.
+
+Configuration:
+--------------
+
+You can configure Fail2ban using the files in /etc/fail2ban. It is possible to
+configure the server using commands sent to it by fail2ban-client. The available
+commands are described in the man page of fail2ban-client. Please refer to it or
+to the website: http://www.fail2ban.org
+
+Contact:
+--------
+
+You need some new features, you found bugs or you just appreciate this program,
+you can contact me at:
+
+Website: http://www.fail2ban.org
+
+Cyril Jaquier: <cyril.jaquier@fail2ban.org>
+
+Thanks:
+-------
+
+Kévin Drapel, Marvin Rouge, Sireyessire, Robert Edeker, Tom Pike, Iain Lea,
+Andrey G. Grozin, Yaroslav Halchenko, Jonathan Kamens, Stephen Gildea, Markus
+Hoffmann, Mark Edgington, Patrick Börjesson, kojiro, zugeschmiert, Tyler, Nick
+Munger, Christoph Haas, Justin Shore, Joël Bertrand, René Berber, mEDI, Axel
+Thimm, Eric Gerbier, Christian Rauch, Michael C. Haller, Jonathan Underwood,
+Hanno 'Rince' Wagner, Daniel B. Cid, David Nutter, Raphaël Marichez, Guillaume
+Delvit, Vaclav Misek, Adrien Clerc, Michael Hanselmann, Vincent Deffontaines,
+Bill Heaton, Russell Odom, Christos Psonis, Arturo 'Buanzo' Busleiman and many
+others.
+
+License:
+--------
+
+Fail2Ban is free software; you can redistribute it and/or modify it under the
+terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2 of the License, or (at your option) any later
+version.
+
+Fail2Ban is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along with
+Fail2Ban; if not, write to the Free Software Foundation, Inc., 59 Temple Place,
+Suite 330, Boston, MA  02111-1307  USA

README.Solaris

@@ -1,122 +0,0 @@
-# vim:tw=80:ft=txt
-
-README FOR SOLARIS INSTALLATIONS
-
-By Roy Sigurd Karlsbakk <roy@karlsbakk.net>
-
-ABOUT
-
-This README is meant for those wanting to install fail2ban on Solaris 10,
-OpenSolaris, OpenIndiana etc. To some degree it may as well be useful for
-users of older Solaris versions and Nexenta, but don't rely on it.
-
-READ ME FIRST
-
-If I use the term Solaris, I am talking about any Solaris dialect, that is, the
-official Sun/Oracle ones or derivatives. If I describe an OS as
-"OpenSolaris-based", it means it's either OpenSolaris, OpenIndiana or one of the
-other, but /not/ the Nexenta family, since this only uses the OpenSolaris/
-IllumOS kernel and not the userland. If I say Solaris 10, I mean Solaris 10 and
-perhaps, if you're lucky and have some good gods on your side, it may also apply
-to Solaris 9 or even 8 and hopefully in the new Solaris 11 whenever that may be
-released. Quoted lines of code, settings etc. are indented with two spaces.
-This does _not_ mean you should use that indentation, especially in config files
-where they can be harmful. Optional settings are prefixed with OPT: while
-required settings are prefixed with REQ:. If no prefix is found, regard it as a
-required setting.
-
-INSTALLATION ON SOLARIS
-
-The installation is straight forward on Solaris as well as on linux/bsd/etc.
-./setup.py install installs the general packages in /usr/bin on OpenSolaris-
-based distros or (at least on this box) under /usr/sfw/bin on Solaris 10. In
-the files/ directory you will find the file solaris-fail2ban.xml containing the
-Solaris service. To install this, run the following command as root (or with
-sudo):
-
-  svccfg import files/solaris-fail2ban.xml
-
-This should normally without giving an error. If you get an error, deal with it,
-and please post any relevant info (or fixes?) to the fail2ban mailing list.
-Next install the service handler - copy the script in and allow it to be executed:
-
-  cp files/solaris-svc-fail2ban /lib/svc/method/svc-fail2ban
-  chmod +x /lib/svc/method/svc-fail2ban
-
-CONFIGURE SYSLOG
-
-For some reason, a default Solaris installation does not log ssh login attempts,
-and since fail2ban works by monitoring logs, enabling this logging is rather
-important for it to work. To enable this, edit /etc/syslog.conf and add a line
-at the end:
-
-  auth.info					/var/adm/auth.log
-
-Save the file and exit, and run
-
-  touch /var/adm/auth.log
-
-The Solaris system logger will _not_ create a non-existing file. Now, restart
-the system logger.
-
-  svcadm restart system-log
-
-Try to ssh into localhost with ssh asdf@localhost and enter an invalid password.
-Make sure this is logged in the above file. When done, you may configure
-fail2ban.
-
-FAIL2BAN CONFIGURATION
-
-OPT: Create /etc/fail2ban/fail2ban.local containing:
-
-# Fail2Ban configuration file for logging fail2ban on Solaris
-#
-[Definition]
-
-logtarget = /var/adm/fail2ban.log
-
-
-REQ: Create /etc/fail2ban/jail.local containing:
-
-[ssh-tcpwrapper]
-
-enabled     = true
-filter      = sshd
-action      = hostsdeny[daemon_list=sshd]
-              sendmail-whois[name=SSH, dest=you@example.com]
-ignoreregex = for myuser from
-logpath     = /var/adm/auth.log
-
-Set the sendmail dest address to something useful or drop the line to stop it spamming you.
-Set 'myuser' to your username to avoid banning yourself or remove the line.
-
-START (OR RESTART) FAIL2BAN
-
-Enable the fail2ban service with
-
-  svcadm enable fail2ban
-
-When done, check that all services are running well
-
-  svcs -xv
-
-GOTCHAS AND FIXMES
-
-* It seems the installation may be starting fail2ban automatically. If this is
-  done, fail2ban will not start, but no errors will be returned from svcs
-  (above). Check if it's running with 'ps -ef | grep fail2ban' and manually kill
-  the PID if it is. Re-enable fail2ban and try again
-
-    svcadm disable fail2ban
-    svcadm enable fail2ban
-
-* If svcs -xv says that fail2ban failed to start or svcs says it's in maintenance mode
-  check /var/svc/log/network-fail2ban:default.log for clues.
-  Check permissions on /var/adm, /var/adm/auth.log /var/adm/fail2ban.log and /var/run/fail2ban
-  You may need to:
-
-  sudo mkdir /var/run/fail2ban
-
-* Fail2ban adds lines like these to /etc/hosts.deny:
-
-    sshd: 1.2.3.4

README.md

@@ -1,129 +0,0 @@
-                         __      _ _ ___ _               
-                        / _|__ _(_) |_  ) |__  __ _ _ _  
-                       |  _/ _` | | |/ /| '_ \/ _` | ' \ 
-                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
-                       v1.0.1.dev1            20??/??/??
-
-## Fail2Ban: ban hosts that cause multiple authentication errors
-
-Fail2Ban scans log files like `/var/log/auth.log` and bans IP addresses conducting
-too many failed login attempts. It does this by updating system firewall rules
-to reject new connections from those IP addresses, for a configurable amount
-of time. Fail2Ban comes out-of-the-box ready to read many standard log files,
-such as those for sshd and Apache, and is easily configured to read any log
-file of your choosing, for any error you wish.
-
-Though Fail2Ban is able to reduce the rate of incorrect authentication
-attempts, it cannot eliminate the risk presented by weak authentication.
-Set up services to use only two factor, or public/private authentication
-mechanisms if you really want to protect services.
-     
-<img src="http://www.worldipv6launch.org/wp-content/themes/ipv6/downloads/World_IPv6_launch_logo.svg" height="52pt"/> | Since v0.10 fail2ban supports the matching of IPv6 addresses.
-------|------
-
-This README is a quick introduction to Fail2Ban. More documentation, FAQ, and HOWTOs
-to be found on fail2ban(1) manpage, [Wiki](https://github.com/fail2ban/fail2ban/wiki),
-[Developers documentation](https://fail2ban.readthedocs.io/)
-and the website: https://www.fail2ban.org
-
-Installation:
--------------
-
-**It is possible that Fail2Ban is already packaged for your distribution.  In
-this case, you should use that instead.**
-
-Required:
-- [Python2 >= 2.6 or Python >= 3.2](https://www.python.org) or [PyPy](https://pypy.org)
-- python-setuptools, python-distutils or python3-setuptools for installation from source
-
-Optional:
-- [pyinotify >= 0.8.3](https://github.com/seb-m/pyinotify), may require:
-  * Linux >= 2.6.13
-- [gamin >= 0.0.21](http://www.gnome.org/~veillard/gamin)
-- [systemd >= 204](http://www.freedesktop.org/wiki/Software/systemd) and python bindings:
-  * [python-systemd package](https://www.freedesktop.org/software/systemd/python-systemd/index.html)
-- [dnspython](http://www.dnspython.org/)
-
-
-To install:
-
-    tar xvfj fail2ban-1.0.1.tar.bz2
-    cd fail2ban-1.0.1
-    sudo python setup.py install
-   
-Alternatively, you can clone the source from GitHub to a directory of Your choice, and do the install from there. Pick the correct branch, for example, master or 0.11
-
-    git clone https://github.com/fail2ban/fail2ban.git
-    cd fail2ban
-    sudo python setup.py install 
-    
-This will install Fail2Ban into the python library directory. The executable
-scripts are placed into `/usr/bin`, and configuration in `/etc/fail2ban`.
-
-Fail2Ban should be correctly installed now. Just type:
-
-    fail2ban-client -h
-
-to see if everything is alright. You should always use fail2ban-client and
-never call fail2ban-server directly.
-You can verify that you have the correct version installed with 
-
-    fail2ban-client version
-
-Please note that the system init/service script is not automatically installed.
-To enable fail2ban as an automatic service, simply copy the script for your
-distro from the `files` directory to `/etc/init.d`. Example (on a Debian-based
-system):
-
-    cp files/debian-initd /etc/init.d/fail2ban
-    update-rc.d fail2ban defaults
-    service fail2ban start
-
-Configuration:
---------------
-
-You can configure Fail2Ban using the files in `/etc/fail2ban`. It is possible to
-configure the server using commands sent to it by `fail2ban-client`. The
-available commands are described in the fail2ban-client(1) manpage.  Also see
-fail2ban(1) and jail.conf(5)  manpages for further references.
-
-Code status:
-------------
-
-* travis-ci.org: [![tests status](https://secure.travis-ci.org/fail2ban/fail2ban.svg?branch=master)](https://travis-ci.org/fail2ban/fail2ban?branch=master) / [![tests status](https://secure.travis-ci.org/fail2ban/fail2ban.svg?branch=0.11)](https://travis-ci.org/fail2ban/fail2ban?branch=0.11) (0.11 branch) / [![tests status](https://secure.travis-ci.org/fail2ban/fail2ban.svg?branch=0.10)](https://travis-ci.org/fail2ban/fail2ban?branch=0.10) (0.10 branch) 
-
-* coveralls.io: [![Coverage Status](https://coveralls.io/repos/fail2ban/fail2ban/badge.svg?branch=master)](https://coveralls.io/github/fail2ban/fail2ban?branch=master) / [![Coverage Status](https://coveralls.io/repos/fail2ban/fail2ban/badge.svg?branch=0.11)](https://coveralls.io/github/fail2ban/fail2ban?branch=0.11) (0.11 branch) / [![Coverage Status](https://coveralls.io/repos/fail2ban/fail2ban/badge.svg?branch=0.10)](https://coveralls.io/github/fail2ban/fail2ban?branch=0.10) / (0.10 branch)
-
-* codecov.io: [![codecov.io](https://codecov.io/gh/fail2ban/fail2ban/coverage.svg?branch=master)](https://codecov.io/gh/fail2ban/fail2ban/branch/master) / [![codecov.io](https://codecov.io/gh/fail2ban/fail2ban/coverage.svg?branch=0.11)](https://codecov.io/gh/fail2ban/fail2ban/branch/0.11) (0.11 branch) / [![codecov.io](https://codecov.io/gh/fail2ban/fail2ban/coverage.svg?branch=0.10)](https://codecov.io/gh/fail2ban/fail2ban/branch/0.10) (0.10 branch)
-
-Contact:
---------
-
-### Bugs, feature requests, discussions?
-See [CONTRIBUTING.md](https://github.com/fail2ban/fail2ban/blob/master/CONTRIBUTING.md)
-
-### You just appreciate this program:
-Send kudos to the original author ([Cyril Jaquier](mailto:cyril.jaquier@fail2ban.org))
-or *better* to the [mailing list](https://lists.sourceforge.net/lists/listinfo/fail2ban-users)
-since Fail2Ban is "community-driven" for years now.
-
-Thanks:
--------
-
-See [THANKS](https://github.com/fail2ban/fail2ban/blob/master/THANKS) file.
-
-License:
---------
-
-Fail2Ban is free software; you can redistribute it and/or modify it under the
-terms of the GNU General Public License as published by the Free Software
-Foundation; either version 2 of the License, or (at your option) any later
-version.
-
-Fail2Ban is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with
-Fail2Ban; if not, write to the Free Software Foundation, Inc., 51 Franklin
-Street, Fifth Floor, Boston, MA 02110, USA

RELEASE

@@ -1,206 +0,0 @@
-..                       __      _ _ ___ _
-                        / _|__ _(_) |_  ) |__  __ _ _ _
-                       |  _/ _` | | |/ /| '_ \/ _` | ' \
-                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
-
-================================================================================
-How to do a release for Fail2Ban
-================================================================================
-
-Preparation
-===========
-
-* Check distribution patches and see if they can be included
-
-  * https://apps.fedoraproject.org/packages/fail2ban/sources
-  * http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-analyzer/fail2ban/
-  * http://svnweb.freebsd.org/ports/head/security/py-fail2ban/
-  * https://build.opensuse.org/package/show?package=fail2ban&project=openSUSE%3AFactory
-  * http://sophie.zarb.org/sources/fail2ban (Mageia)
-  * https://trac.macports.org/browser/trunk/dports/security/fail2ban
-
-
-* Check distribution outstanding bugs
-
-  * https://github.com/fail2ban/fail2ban/issues?sort=updated&state=open
-  * http://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=fail2ban
-  * https://bugs.launchpad.net/ubuntu/+source/fail2ban
-  * http://bugs.sabayon.org/buglist.cgi?quicksearch=net-analyzer%2Ffail2ban
-  * https://bugs.archlinux.org/?project=5&cat%5B%5D=33&string=fail2ban
-  * https://bugs.gentoo.org/buglist.cgi?query_format=advanced&short_desc=fail2ban&bug_status=UNCONFIRMED&bug_status=CONFIRMED&bug_status=IN_PROGRESS&short_desc_type=allwords
-  * https://bugzilla.redhat.com/buglist.cgi?query_format=advanced&bug_status=NEW&bug_status=ASSIGNED&component=fail2ban&classification=Red%20Hat&classification=Fedora
-  * http://www.freebsd.org/cgi/query-pr-summary.cgi?text=fail2ban
-  * https://bugs.mageia.org/buglist.cgi?quicksearch=fail2ban
-  * https://build.opensuse.org/package/requests/openSUSE:Factory/fail2ban
-
-
-* Make sure the tests pass::
-
-  ./fail2ban-testcases-all
-
-* Ensure the version is correct in:
-
-  * ./fail2ban/version.py
-  * top of ChangeLog
-  * README.md
-
-
-* Ensure the MANIFEST is complete
-
-  ad-hoc bash script to run in a clean clone:
-
-     find -type f | grep -v -e '\.git' -e '/doc/' -e '\.travis' -e MANIFEST | sed -e 's,^\./,,g' | while read f; do grep -ne "^$f\$" MANIFEST >/dev/null || echo "$f" ; done
-
-  or an alternative for comparison with previous release
-
-     git diff 0.10.0 | grep -B2 'index 0000000..' | grep -B1 'new file mode' | sed -n -e '/^diff /s,.* b/,,gp' >> MANIFEST
-     sort MANIFEST | uniq | sponge MANIFEST
-
-* Run::
-
-  python setup.py sdist
-
-* Look for errors like::
-
-   'testcases/files/logs/mysqld.log' not a regular file -- skipping
-
-  * Which indicates that testcases/files/logs/mysqld.log has been moved or is a directory::
-
-      tar -C /tmp -jxf dist/fail2ban-0.9.6.tar.bz2
-
-* clean up current directory::
-
-    diff -rul --exclude \*.pyc . /tmp/fail2ban-0.10.0/
-
-  * Only differences should be files that you don't want distributed.
-
-
-* Ensure the tests work from the tarball::
-
-    cd /tmp/fail2ban-0.9.6/ && bin/fail2ban-testcases
-
-* Add/finalize the corresponding entry in the ChangeLog
-
-  * To generate a list of committers use e.g.::
-
-      git shortlog -sn 0.10.0.. | sed -e 's,^[ 0-9\t]*,,g' | tr '\n' '\|' | sed -e 's:|:, :g'
-
-  * Ensure the top of the ChangeLog has the right version and current date.
-  * Ensure the top entry of the ChangeLog has the right version and current date.
-
-* Update man pages::
-
-    (cd man ; ./generate-man )
-    git commit -m 'DOC/ENH: update man pages for release' man/*
-
-* Cleanout TODO file with the finished stuff
-
-* Prepare source and rpm binary distributions::
-
-    python setup.py sdist
-
-  * Broken for now:  python setup.py bdist_rpm
-  * Broken for now:  python setup.py upload
-
-
-* Tag the release by using a signed (and annotated) tag.  Cut/paste
-  release ChangeLog entry as tag annotation::
-
-    git tag -s 0.10.0
-
-Pre Release
-===========
-
-* Provide a release sample to distributors
-
-  * Arch Linux:
-
-    * https://www.archlinux.org/packages/community/any/fail2ban/
-
-  * Debian: Yaroslav Halchenko <debian@onerussian.com>
-
-    * http://packages.qa.debian.org/f/fail2ban.html
-
-  * FreeBSD: Christoph Theis theis@gmx.at>
-
-    * http://svnweb.freebsd.org/ports/head/security/py-fail2ban/Makefile?view=markup
-    * http://www.freebsd.org/cgi/query-pr-summary.cgi?text=fail2ban
-
-  * Fedora: Axel Thimm <Axel.Thimm@atrpms.net>
-
-    * https://apps.fedoraproject.org/packages/fail2ban
-    * http://pkgs.fedoraproject.org/cgit/fail2ban.git
-    * https://admin.fedoraproject.org/pkgdb/acls/bugs/fail2ban
-
-  * Gentoo: netmon@gentoo.org
-
-    * http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-analyzer/fail2ban/metadata.xml?view=markup
-    * https://bugs.gentoo.org/buglist.cgi?quicksearch=fail2ban
-
-  * openSUSE: Stephan Kulow <coolo@suse.com>
-
-    * https://build.opensuse.org/package/show/openSUSE:Factory/fail2ban
-
-  * Mac Ports: @Malbrouck on github (gh-49)
-
-    * https://trac.macports.org/browser/trunk/dports/security/fail2ban/Portfile
-
-  * Mageia:
-
-    * https://bugs.mageia.org/buglist.cgi?quicksearch=fail2ban
-
-  * And potentially to the fail2ban-users email list.
-
-
-* Wait for feedback from distributors
-
-* Prepare a release notice https://github.com/fail2ban/fail2ban/releases/new
-
-* Upload the source/binaries from the dist directory and tag the release using the URL
-
-* Upload source/binaries to sourceforge http://sourceforge.net/projects/fail2ban/
-
-* Run the following and update the wiki with output::
-
-    python -c 'import fail2ban.protocol; fail2ban.protocol.printWiki()'
-
-  * page: http://www.fail2ban.org/wiki/index.php/Commands
-
-
-* Update:
-
-  * http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_Versions&action=edit
-
-  * http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_News&action=edit
-    * move old bits to http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_OldNews&action=edit
-
-  * http://www.fail2ban.org/wiki/index.php/ChangeLog
-  * http://www.fail2ban.org/wiki/index.php/Requirements (Check requirement)
-  * http://www.fail2ban.org/wiki/index.php/Features
-
-* See if any filters are upgraded:
-  http://www.fail2ban.org/wiki/index.php/Special:AllPages
-
-* Email users and development list of release
-
-* notify distributors
-
-Post Release
-============
-
-Add the following to the top of the ChangeLog::
-
-  ver. 0.10.0 (2016/XX/XXX) - wanna-be-released
-  -----------
-  
-  ### Fixes
-  
-  ### New Features
-  
-  ### Enhancements
-
-Alter the git shortlog command in the previous section to refer to the just
-released version.
-
-and adjust fail2ban/version.py to carry .dev0 suffix to signal
-a version under development.

THANKS

@@ -1,140 +0,0 @@
-Fail2Ban is an open source project which was conceived and originally
-developed by Cyril Jaquier until 2010.  Since then Fail2Ban grew into
-a community-driven project with many contributions from its users.
-Below is an alphabetically sorted partial list of the contributors to
-the project.  If you have been left off, please let us know
-(preferably send a pull request on github with the "fix") and you will
-be added
-
-Aaron Brice
-Adam Tkac
-Adrien Clerc
-ache
-ag4ve (Shawn)
-Alasdair D. Campbell
-Alexander Koeppe (IPv6 support)
-Alexandre Perrin (kAworu)
-Amir Caspi
-Amy
-Andrew James Collett (ajcollett)
-Andrew St. Jean
-Andrey G. Grozin
-Andy Fragen
-Arturo 'Buanzo' Busleiman
-Axel Thimm
-Bas van den Dikkenberg
-Beau Raines
-Bill Heaton
-Carlos Alberto Lopez Perez
-cepheid666
-Christian Rauch
-Christophe Carles
-Christoph Haas
-Christos Psonis
-craneworks
-Cyril Jaquier
-Daniel B. Cid
-Daniel B.
-Daniel Black
-David Nutter
-David Reagan (jerrac)
-Derek Atkins
-Donald Yandt
-Eric Gerbier
-Enrico Labedzki
-Eugene Hopkinson (SlowRiot)
-ftoppi
-Florian Robert (1technophile)
-François Boulogne
-Frantisek Sumsal
-Frédéric
-Georgiy Mernov
-Guilhem Lettron
-Guillaume Delvit
-Hank Leininger
-Hanno 'Rince' Wagner
-Helmut Grohne
-Iain Lea
-Ioan Indreias
-Ivo Truxa
-John Thoe
-Jacques Lav!gnotte
-Johannes Weberhofer
-Jason H Martin
-Jeaye Wilkerson
-Jisoo Park
-Joel M Snyder
-Jonathan Kamens
-Jonathan Lanning
-Jonathan Underwood
-Joël Bertrand
-JP Espinosa
-jserrachinha
-Justin Shore
-Kevin Locke
-Kévin Drapel
-kjohnsonecl
-kojiro
-Lars Kneschke
-Lee Clemens
-leftyfb (Mike Rushton)
-M. Maraun
-Manuel Arostegui Ramirez
-Marcel Dopita
-Mark Edgington
-Mark McKinstry
-Mark White
-Markus Hoffmann
-Marvin Rouge
-mEDI
-Мернов Георгий
-Merijn Schering
-Michael C. Haller
-Michael Hanselmann
-Mika (mkl)
-Nick Munger
-onorua
-Orion Poplawski
-Pablo Rodriguez Fernandez
-Paul Marrapese
-Paul Traina
-Noel Butler
-Patrick Börjesson
-Pressy
-Raphaël Marichez
-RealRancor
-René Berber
-Robert Edeker
-Rolf Fokkens
-Roman Gelfand
-Russell Odom
-SATO Kentaro
-Sean DuBois
-Sebastian Arcus
-Serg G. Brester (sebres)
-Sergey Safarov
-Shaun C.
-Sireyessire
-silviogarbes
-Stefan Tatschner
-Stephen Gildea
-Steven Hiscocks
-TESTOVIK
-Thomas Mayer
-Tom Pike
-Tom Hendrikx
-Tomas Pihl
-Thomas Skierlo (phaleas)
-Tony Lawrence
-Tomasz Ciolek
-Tyler
-Vaclav Misek
-Vincent Deffontaines
-Yaroslav Halchenko
-Winston Smith
-Yehuda Katz
-ykimon
-Yung-Chin Oei
-Zbigniew Jędrzejewski-Szmek
-zugeschmiert
-Zurd

TODO

@@ -4,7 +4,7 @@
                        |_| \__,_|_|_/___|_.__/\__,_|_||_|
 
 ================================================================================
-ToDo
+ToDo                                                            $Revision$
 ================================================================================
 
 Legend:
@@ -13,6 +13,17 @@ Legend:
 # partially done
 * done
 
+- Removed relative imports
+
+- Cleanup fail2ban-client and fail2ban-server. Move code to server/ and client/
+
+- Add timeout to external commands (signal alarm, watchdog thread, etc)
+
+- New backend: pyinotify
+
+- Uniformize filters and actions name. Use the software name (openssh, postfix,
+  proftp)
+
 - Added <USER> tag for failregex. Add features using this information. Maybe add
   more tags
 
@@ -23,10 +34,21 @@ Legend:
 - Auto-enable function (search for log files), check modification date to see if
   service is still in use
 
+- Improve parsing of the action parameters in jailreader.py
+
 - Better handling of the protocol in transmitter.py
 
 - Add gettext support (I18N)
 
+- Multiline log reading
+
+- Improve execution of action. Why does subprocess.call deadlock with
+  multi-jails?
+
+# see Feature Request Tracking System at SourceForge.net
+
 # improve documentation and website for user
 
 # better return values in function
+
+# refactoring in server.py, actions.py, filter.py

Vagrantfile

@@ -1,30 +0,0 @@
-Vagrant.configure("2") do |config|
-
-    config.vm.define "secure" do |secure|
-        secure.vm.box = "ubuntu/trusty64"
-        secure.vm.hostname = "secure.dev.fail2ban.org"
-        secure.vm.network "private_network", ip: "192.168.200.100"
-
-#        secure.vm.synced_folder 'salt/roots', '/srv/salt'
-
-#        secure.vm.provision :salt do |salt|
-#            salt.minion_config = 'salt/minion'
-#            salt.run_highstate = true
-#            salt.verbose = true
-#        end
-    end
-
-    config.vm.define "attacker" do |attacker|
-        attacker.vm.box = "ubuntu/trusty64"
-        attacker.vm.hostname = "attacker.dev.fail2ban.org"
-        attacker.vm.network "private_network", ip: "192.168.200.150"
-
-#        attacker.vm.synced_folder 'salt/roots', '/srv/salt'
-
-#        attacker.vm.provision :salt do |salt|
-#            salt.minion_config = 'salt/minion'
-#            salt.run_highstate = true
-#            salt.verbose = true
-#        end
-    end
-end

bin/fail2ban-client

@@ -1,37 +0,0 @@
-#!/usr/bin/env python
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-
-# This file is part of Fail2Ban.
-#
-# Fail2Ban is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Fail2Ban is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-
-"""
-Fail2Ban reads log file that contains password failure report
-and bans the corresponding IP addresses using firewall rules.
-
-This tools starts/stops fail2ban server or does client/server communication,
-to change/read parameters of the server or jails.
-
-"""
-
-__author__ = "Fail2Ban Developers"
-__copyright__ = "Copyright (c) 2004-2008 Cyril Jaquier, 2012-2014 Yaroslav Halchenko, 2014-2016 Serg G. Brester"
-__license__ = "GPL"
-
-from fail2ban.client.fail2banclient import exec_command_line, sys
-
-if __name__ == "__main__":
-	exec_command_line(sys.argv)

bin/fail2ban-regex

@@ -1,34 +0,0 @@
-#!/usr/bin/env python
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-#
-# This file is part of Fail2Ban.
-#
-# Fail2Ban is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Fail2Ban is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-"""
-Fail2Ban  reads log file that contains password failure report
-and bans the corresponding IP addresses using firewall rules.
-
-This tools can test regular expressions for "fail2ban".
-
-"""
-
-__author__ = "Fail2Ban Developers"
-__copyright__ = "Copyright (c) 2004-2008 Cyril Jaquier, 2012-2014 Yaroslav Halchenko"
-__license__ = "GPL"
-
-from fail2ban.client.fail2banregex import exec_command_line
-
-exec_command_line()

bin/fail2ban-server

@@ -1,37 +0,0 @@
-#!/usr/bin/env python
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-
-# This file is part of Fail2Ban.
-#
-# Fail2Ban is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Fail2Ban is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-
-"""
-Fail2Ban reads log file that contains password failure report
-and bans the corresponding IP addresses using firewall rules.
-
-This tool starts/stops fail2ban server or does client/server communication
-to change/read parameters of the server or jails.
-
-"""
-
-__author__ = "Fail2Ban Developers"
-__copyright__ = "Copyright (c) 2004-2008 Cyril Jaquier, 2012-2014 Yaroslav Halchenko, 2014-2016 Serg G. Brester"
-__license__ = "GPL"
-
-from fail2ban.client.fail2banserver import exec_command_line, sys
-
-if __name__ == "__main__":
-	exec_command_line(sys.argv)

bin/fail2ban-testcases

@@ -1,71 +0,0 @@
-#!/usr/bin/env python
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-"""Script to run Fail2Ban tests battery
-"""
-
-# This file is part of Fail2Ban.
-#
-# Fail2Ban is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Fail2Ban is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-
-__author__ = "Cyril Jaquier"
-__copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2012- Yaroslav Halchenko"
-__license__ = "GPL"
-
-import logging
-import os
-import sys
-import time
-import unittest
-
-# Check if local fail2ban module exists, and use if it exists by
-# modifying the path. This is done so that tests can be used in dev
-# environment.
-if os.path.exists("fail2ban/__init__.py"):
-	sys.path.insert(0, ".")
-from fail2ban.version import version
-
-from fail2ban.tests.utils import getOptParser, initProcess, gatherTests
-from fail2ban.setup import updatePyExec
-
-# Update fail2ban-python env to current python version (where f2b-modules located/installed)
-bindir = os.path.dirname(
-	# __file__ seems to be overwritten sometimes on some python versions (e.g. bug of 2.6 by running under cProfile, etc.):
-	sys.argv[0] if os.path.basename(sys.argv[0]) == 'fail2ban-testcases' else __file__
-)
-updatePyExec(bindir)
-
-(opts, regexps) = getOptParser(__doc__).parse_args()
-
-#
-# Process initialization corresponding options (logging, default options, etc.)
-#
-opts = initProcess(opts)
-verbosity = opts.verbosity
-
-#
-# Gather tests (and filter corresponding options)
-#
-tests = gatherTests(regexps, opts)
-
-#
-# Run the tests
-#
-testRunner = unittest.TextTestRunner(verbosity=verbosity)
-
-tests_results = testRunner.run(tests)
-
-if not tests_results.wasSuccessful(): # pragma: no cover
-	sys.exit(1)

client/__init__.py

@@ -1,6 +1,3 @@
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-
 # This file is part of Fail2Ban.
 #
 # Fail2Ban is free software; you can redistribute it and/or modify
@@ -15,11 +12,14 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
 # Author: Cyril Jaquier
 # 
+# $Revision$
 
 __author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"

client/actionreader.py

@@ -0,0 +1,90 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import logging
+from configreader import ConfigReader
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class ActionReader(ConfigReader):
+	
+	def __init__(self, action, name):
+		ConfigReader.__init__(self)
+		self.__file = action[0]
+		self.__cInfo = action[1]
+		self.__name = name
+	
+	def setFile(self, fileName):
+		self.__file = fileName
+	
+	def getFile(self):
+		return self.__file
+	
+	def setName(self, name):
+		self.__name = name
+	
+	def getName(self):
+		return self.__name
+	
+	def read(self):
+		return ConfigReader.read(self, "action.d/" + self.__file)
+	
+	def getOptions(self, pOpts):
+		opts = [["string", "actionstart", ""],
+				["string", "actionstop", ""],
+				["string", "actioncheck", ""],
+				["string", "actionban", ""],
+				["string", "actionunban", ""]]
+		self.__opts = ConfigReader.getOptions(self, "Definition", opts, pOpts)
+		
+		if self.has_section("Init"):
+			for opt in self.options("Init"):
+				if not self.__cInfo.has_key(opt):
+					self.__cInfo[opt] = self.get("Init", opt)
+	
+	def convert(self):
+		head = ["set", self.__name]
+		stream = list()
+		stream.append(head + ["addaction", self.__file])
+		for opt in self.__opts:
+			if opt == "actionstart":
+				stream.append(head + ["actionstart", self.__file, self.__opts[opt]])
+			elif opt == "actionstop":
+				stream.append(head + ["actionstop", self.__file, self.__opts[opt]])
+			elif opt == "actioncheck":
+				stream.append(head + ["actioncheck", self.__file, self.__opts[opt]])
+			elif opt == "actionban":
+				stream.append(head + ["actionban", self.__file, self.__opts[opt]])
+			elif opt == "actionunban":
+				stream.append(head + ["actionunban", self.__file, self.__opts[opt]])
+		# cInfo
+		if self.__cInfo:
+			for p in self.__cInfo:
+				stream.append(head + ["setcinfo", self.__file, p, self.__cInfo[p]])
+
+		return stream
+		

client/beautifier.py

@@ -0,0 +1,151 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+from server.jails import UnknownJailException
+from server.jails import DuplicateJailException
+import logging
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+##
+# Beautify the output of the client.
+#
+# Fail2ban server only return unformatted return codes which need to be
+# converted into user readable messages.
+
+class Beautifier:
+	
+	def __init__(self, cmd = None):
+		self.__inputCmd = cmd
+
+	def setInputCmd(self, cmd):
+		self.__inputCmd = cmd
+		
+	def getInputCmd(self):
+		return self.__inputCmd
+		
+	def beautify(self, response):
+		logSys.debug("Beautify " + `response` + " with " + `self.__inputCmd`)
+		inC = self.__inputCmd
+		msg = response
+		try:
+			if inC[0] == "ping":
+				msg = "Server replied: " + response
+			elif inC[0] == "start":
+				msg = "Jail started"
+			elif inC[0] == "stop":
+				if len(inC) == 1:
+					if response == None:
+						msg = "Shutdown successful"
+				else:
+					if response == None:
+						msg = "Jail stopped"
+			elif inC[0] == "add":
+				msg = "Added jail " + response
+			elif inC[0:1] == ['status']:
+				if len(inC) > 1:
+					# Create IP list
+					ipList = ""
+					for ip in response[1][1][2][1]:
+						ipList += ip + " "
+					# Creates file list.
+					fileList = ""
+					for f in response[0][1][2][1]:
+						fileList += f + " "
+					# Display information
+					msg = "Status for the jail: " + inC[1] + "\n"
+					msg = msg + "|- " + response[0][0] + "\n"
+					msg = msg + "|  |- " + response[0][1][2][0] + ":\t" + fileList + "\n"
+					msg = msg + "|  |- " + response[0][1][0][0] + ":\t" + `response[0][1][0][1]` + "\n"
+					msg = msg + "|  `- " + response[0][1][1][0] + ":\t" + `response[0][1][1][1]` + "\n"
+					msg = msg + "`- " + response[1][0] + "\n"
+					msg = msg + "   |- " + response[1][1][0][0] + ":\t" + `response[1][1][0][1]` + "\n"
+					msg = msg + "   |  `- " + response[1][1][2][0] + ":\t" + ipList + "\n"
+					msg = msg + "   `- " + response[1][1][1][0] + ":\t" + `response[1][1][1][1]`
+				else:
+					msg = "Status\n"
+					msg = msg + "|- " + response[0][0] + ":\t" + `response[0][1]` + "\n"
+					msg = msg + "`- " + response[1][0] + ":\t\t" + response[1][1]
+			elif inC[1] == "logtarget":
+				msg = "Current logging target is:\n"
+				msg = msg + "`- " + response
+			elif inC[1:2] == ['loglevel']:
+				msg = "Current logging level is "
+				if response == 1:
+					msg = msg + "ERROR"
+				elif response == 2:
+					msg = msg + "WARN"
+				elif response == 3:
+					msg = msg + "INFO"
+				elif response == 4:
+					msg = msg + "DEBUG"
+				else:
+					msg = msg + `response`
+			elif inC[2] in ("logpath", "addlogpath", "dellogpath"):
+				if len(response) == 0:
+					msg = "No file is currently monitored"
+				else:
+					msg = "Current monitored log file(s):\n"
+					for path in response[:-1]:
+						msg = msg + "|- " + path + "\n"
+					msg = msg + "`- " + response[len(response)-1]
+			elif inC[2] in ("ignoreip", "addignoreip", "delignoreip"):
+				if len(response) == 0:
+					msg = "No IP address/network is ignored"
+				else:
+					msg = "These IP addresses/networks are ignored:\n"
+					for ip in response[:-1]:
+						msg = msg + "|- " + ip + "\n"
+					msg = msg + "`- " + response[len(response)-1]
+			elif inC[2] in ("failregex", "addfailregex", "delfailregex",
+							"ignoreregex", "addignoreregex", "delignoreregex"):
+				if len(response) == 0:
+					msg = "No regular expression is defined"
+				else:
+					msg = "The following regular expression are defined:\n"
+					c = 0
+					for ip in response[:-1]:
+						msg = msg + "|- [" + str(c) + "]: " + ip + "\n"
+						c += 1
+					msg = msg + "`- [" + str(c) + "]: " + response[len(response)-1]
+		except Exception:
+			logSys.warn("Beautifier error. Please report the error")
+			logSys.error("Beautify " + `response` + " with " + `self.__inputCmd` +
+						 " failed")
+			msg = msg + `response`
+		return msg
+
+	def beautifyError(self, response):
+		logSys.debug("Beautify (error) " + `response` + " with " + `self.__inputCmd`)
+		msg = response
+		if isinstance(response, UnknownJailException):
+			msg = "Sorry but the jail '" + response[0] + "' does not exist"
+		elif isinstance(response, IndexError):
+			msg = "Sorry but the command is invalid"
+		elif isinstance(response, DuplicateJailException):
+			msg = "The jail '" + response[0] + "' already exists"
+		return msg

client/configparserinc.py

@@ -0,0 +1,108 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Yaroslav Halchenko
+# Modified: Cyril Jaquier
+# $Revision$
+
+__author__ = 'Yaroslav Halhenko'
+__revision__ = '$Revision: $'
+__date__ = '$Date:  $'
+__copyright__ = 'Copyright (c) 2007 Yaroslav Halchenko'
+__license__ = 'GPL'
+
+import logging, os
+from ConfigParser import SafeConfigParser
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class SafeConfigParserWithIncludes(SafeConfigParser):
+	"""
+	Class adds functionality to SafeConfigParser to handle included
+	other configuration files (or may be urls, whatever in the future)
+
+	File should have section [includes] and only 2 options implemented
+	are 'files_before' and 'files_after' where files are listed 1 per
+	line.
+
+	Example:
+
+[INCLUDES]
+before = 1.conf
+			   3.conf
+
+after = 1.conf
+
+	It is a simple implementation, so just basic care is taken about
+	recursion. Includes preserve right order, ie new files are
+	inserted to the list of read configs before original, and their
+	includes correspondingly so the list should follow the leaves of
+	the tree.
+
+	I wasn't sure what would be the right way to implement generic (aka c++
+    template) so we could base at any *configparser class... so I will
+    leave it for the future
+
+	"""
+
+	SECTION_NAME = "INCLUDES"
+
+	#@staticmethod
+	def getIncludes(resource, seen = []):
+		"""
+		Given 1 config resource returns list of included files
+		(recursively) with the original one as well
+		Simple loops are taken care about
+		"""
+		
+		# Use a short class name ;)
+		SCPWI = SafeConfigParserWithIncludes
+		
+		parser = SafeConfigParser()
+		parser.read(resource)
+		
+		resourceDir = os.path.dirname(resource)
+
+		newFiles = [ ('before', []), ('after', []) ]
+		if SCPWI.SECTION_NAME in parser.sections():
+			for option_name, option_list in newFiles:
+				if option_name in parser.options(SCPWI.SECTION_NAME):
+					newResources = parser.get(SCPWI.SECTION_NAME, option_name)
+					for newResource in newResources.split('\n'):
+						if os.path.isabs(newResource):
+							r = newResource
+						else:
+							r = "%s/%s" % (resourceDir, newResource)
+						if r in seen:
+							continue
+						s = seen + [resource]
+						option_list += SCPWI.getIncludes(r, s)
+		# combine lists
+		return newFiles[0][1] + [resource] + newFiles[1][1]
+		#print "Includes list for " + resource + " is " + `resources`
+	getIncludes = staticmethod(getIncludes)
+
+
+	def read(self, filenames):
+		fileNamesFull = []
+		if not isinstance(filenames, list):
+			filenames = [ filenames ]
+		for filename in filenames:
+			fileNamesFull += SafeConfigParserWithIncludes.getIncludes(filename)
+		logSys.debug("Reading files: %s" % fileNamesFull)
+		return SafeConfigParser.read(self, fileNamesFull)
+

client/configreader.py

@@ -0,0 +1,101 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# Modified by: Yaroslav Halchenko (SafeConfigParserWithIncludes)
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import logging, os
+from configparserinc import SafeConfigParserWithIncludes
+from ConfigParser import NoOptionError, NoSectionError
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class ConfigReader(SafeConfigParserWithIncludes):
+	
+	BASE_DIRECTORY = "/etc/fail2ban/"
+	
+	def __init__(self):
+		SafeConfigParserWithIncludes.__init__(self)
+		self.__opts = None
+	
+	#@staticmethod
+	def setBaseDir(folderName):
+		path = folderName.rstrip('/')
+		ConfigReader.BASE_DIRECTORY = path + '/'
+	setBaseDir = staticmethod(setBaseDir)
+		
+	#@staticmethod
+	def getBaseDir():
+		return ConfigReader.BASE_DIRECTORY
+	getBaseDir = staticmethod(getBaseDir)
+	
+	def read(self, filename):
+		basename = ConfigReader.BASE_DIRECTORY + filename
+		logSys.debug("Reading " + basename)
+		bConf = basename + ".conf"
+		bLocal = basename + ".local"
+		if os.path.exists(bConf) or os.path.exists(bLocal):
+			SafeConfigParserWithIncludes.read(self, [bConf, bLocal])
+			return True
+		else:
+			logSys.error(bConf + " and " + bLocal + " do not exist")
+			return False
+	
+	##
+	# Read the options.
+	#
+	# Read the given option in the configuration file. Default values
+	# are used...
+	# Each optionValues entry is composed of an array with:
+	# 0 -> the type of the option
+	# 1 -> the name of the option
+	# 2 -> the default value for the option
+	
+	def getOptions(self, sec, options, pOptions = None):
+		values = dict()
+		for option in options:
+			try:
+				if option[0] == "bool":
+					v = self.getboolean(sec, option[1])
+				elif option[0] == "int":
+					v = self.getint(sec, option[1])
+				else:
+					v = self.get(sec, option[1])
+				if not pOptions == None and option[1] in pOptions:
+					continue
+				values[option[1]] = v
+			except NoSectionError, e:
+				# No "Definition" section or wrong basedir
+				logSys.error(e)
+				values[option[1]] = option[2]
+			except NoOptionError:
+				if not option[2] == None:
+					logSys.warn("'%s' not defined in '%s'. Using default value"
+								% (option[1], sec))
+					values[option[1]] = option[2]
+			except ValueError:
+				logSys.warn("Wrong value for '" + option[1] + "' in '" + sec +
+							"'. Using default one: '" + `option[2]` + "'")
+				values[option[1]] = option[2]
+		return values

client/configurator.py

@@ -0,0 +1,78 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import logging
+from configreader import ConfigReader
+from fail2banreader import Fail2banReader
+from jailsreader import JailsReader
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class Configurator:
+	
+	def __init__(self):
+		self.__settings = dict()
+		self.__streams = dict()
+		self.__fail2ban = Fail2banReader()
+		self.__jails = JailsReader()
+	
+	#@staticmethod
+	def setBaseDir(folderName):
+		ConfigReader.setBaseDir(folderName)
+	setBaseDir = staticmethod(setBaseDir)
+	
+	#@staticmethod
+	def getBaseDir():
+		return ConfigReader.getBaseDir()
+	getBaseDir = staticmethod(getBaseDir)
+	
+	def readEarly(self):
+		self.__fail2ban.read()
+	
+	def readAll(self):
+		self.readEarly()
+		self.__jails.read()
+	
+	def getEarlyOptions(self):
+		return self.__fail2ban.getEarlyOptions()
+
+	def getOptions(self, jail = None):
+		self.__fail2ban.getOptions()
+		return self.__jails.getOptions(jail)
+		
+	def convertToProtocol(self):
+		self.__streams["general"] = self.__fail2ban.convert()
+		self.__streams["jails"] = self.__jails.convert()
+	
+	def getConfigStream(self):
+		cmds = list()
+		for opt in self.__streams["general"]:
+			cmds.append(opt)
+		for opt in self.__streams["jails"]:
+			cmds.append(opt)
+		return cmds
+	

client/csocket.py

@@ -0,0 +1,59 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+#from cPickle import dumps, loads, HIGHEST_PROTOCOL
+from pickle import dumps, loads, HIGHEST_PROTOCOL
+import socket
+
+class CSocket:
+	
+	END_STRING = "<F2B_END_COMMAND>"
+	
+	def __init__(self, sock = "/var/run/fail2ban/fail2ban.sock"):
+		# Create an INET, STREAMing socket
+		#self.csock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+		self.__csock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+		#self.csock.connect(("localhost", 2222))
+		self.__csock.connect(sock)
+	
+	def send(self, msg):
+		# Convert every list member to string
+		obj = dumps([str(m) for m in msg], HIGHEST_PROTOCOL)
+		self.__csock.send(obj + CSocket.END_STRING)
+		ret = self.receive(self.__csock)
+		self.__csock.close()
+		return ret
+	
+	#@staticmethod
+	def receive(sock):
+		msg = ''
+		while msg.rfind(CSocket.END_STRING) == -1:
+			chunk = sock.recv(6)
+			if chunk == '':
+				raise RuntimeError, "socket connection broken"
+			msg = msg + chunk
+		return loads(msg)
+	receive = staticmethod(receive)

client/fail2banreader.py

@@ -0,0 +1,58 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import logging
+from configreader import ConfigReader
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class Fail2banReader(ConfigReader):
+	
+	def __init__(self):
+		ConfigReader.__init__(self)
+	
+	def read(self):
+		ConfigReader.read(self, "fail2ban")
+	
+	def getEarlyOptions(self):
+		opts = [["string", "socket", "/tmp/fail2ban.sock"]]
+		return ConfigReader.getOptions(self, "Definition", opts)
+	
+	def getOptions(self):
+		opts = [["int", "loglevel", 1],
+				["string", "logtarget", "STDERR"]]
+		self.__opts = ConfigReader.getOptions(self, "Definition", opts)
+	
+	def convert(self):
+		stream = list()
+		for opt in self.__opts:
+			if opt == "loglevel":
+				stream.append(["set", "loglevel", self.__opts[opt]])
+			elif opt == "logtarget":
+				stream.append(["set", "logtarget", self.__opts[opt]])
+		return stream
+	

client/filterreader.py

@@ -0,0 +1,74 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import logging
+from configreader import ConfigReader
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class FilterReader(ConfigReader):
+	
+	def __init__(self, fileName, name):
+		ConfigReader.__init__(self)
+		self.__file = fileName
+		self.__name = name
+	
+	def setFile(self, fileName):
+		self.__file = fileName
+	
+	def getFile(self):
+		return self.__file
+	
+	def setName(self, name):
+		self.__name = name
+	
+	def getName(self):
+		return self.__name
+	
+	def read(self):
+		return ConfigReader.read(self, "filter.d/" + self.__file)
+	
+	def getOptions(self, pOpts):
+		opts = [["string", "ignoreregex", ""],
+				["string", "failregex", ""]]
+		self.__opts = ConfigReader.getOptions(self, "Definition", opts, pOpts)
+	
+	def convert(self):
+		stream = list()
+		for opt in self.__opts:
+			if opt == "failregex":
+				for regex in self.__opts[opt].split('\n'):
+					# Do not send a command if the rule is empty.
+					if regex != '':
+						stream.append(["set", self.__name, "addfailregex", regex])
+			elif opt == "ignoreregex":
+				for regex in self.__opts[opt].split('\n'):
+					# Do not send a command if the rule is empty.
+					if regex != '':
+						stream.append(["set", self.__name, "addignoreregex", regex])		
+		return stream
+		

client/jailreader.py

@@ -0,0 +1,171 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import logging, re, glob
+
+from configreader import ConfigReader
+from filterreader import FilterReader
+from actionreader import ActionReader
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class JailReader(ConfigReader):
+	
+	actionCRE = re.compile("^((?:\w|-|_|\.)+)(?:\[(.*)\])?$")
+	
+	def __init__(self, name):
+		ConfigReader.__init__(self)
+		self.__name = name
+		self.__filter = None
+		self.__actions = list()
+	
+	def setName(self, value):
+		self.__name = value
+	
+	def getName(self):
+		return self.__name
+	
+	def read(self):
+		ConfigReader.read(self, "jail")
+	
+	def isEnabled(self):
+		return self.__opts["enabled"]
+	
+	def getOptions(self):
+		opts = [["bool", "enabled", "false"],
+				["string", "logpath", "/var/log/messages"],
+				["string", "backend", "auto"],
+				["int", "maxretry", 3],
+				["int", "findtime", 600],
+				["int", "bantime", 600],
+				["string", "failregex", None],
+				["string", "ignoreregex", None],
+				["string", "ignoreip", None],
+				["string", "filter", ""],
+				["string", "action", ""]]
+		self.__opts = ConfigReader.getOptions(self, self.__name, opts)
+		
+		if self.isEnabled():
+			# Read filter
+			self.__filter = FilterReader(self.__opts["filter"], self.__name)
+			ret = self.__filter.read()
+			if ret:
+				self.__filter.getOptions(self.__opts)
+			else:
+				logSys.error("Unable to read the filter")
+				return False
+			
+			# Read action
+			for act in self.__opts["action"].split('\n'):
+				try:
+					splitAct = JailReader.splitAction(act)
+					action = ActionReader(splitAct, self.__name)
+					ret = action.read()
+					if ret:
+						action.getOptions(self.__opts)
+						self.__actions.append(action)
+					else:
+						raise AttributeError("Unable to read action")
+				except Exception, e:
+					logSys.error("Error in action definition " + act)
+					logSys.debug(e)
+					return False
+		return True
+	
+	def convert(self):
+		stream = []
+		for opt in self.__opts:
+			if opt == "logpath":
+				for path in self.__opts[opt].split("\n"):
+					pathList = glob.glob(path)
+					if len(pathList) == 0:
+						logSys.error("No file found for " + path)
+					for p in pathList:
+						stream.append(["set", self.__name, "addlogpath", p])
+			elif opt == "backend":
+				backend = self.__opts[opt]
+			elif opt == "maxretry":
+				stream.append(["set", self.__name, "maxretry", self.__opts[opt]])
+			elif opt == "ignoreip":
+				for ip in self.__opts[opt].split():
+					# Do not send a command if the rule is empty.
+					if ip != '':
+						stream.append(["set", self.__name, "addignoreip", ip])
+			elif opt == "findtime":
+				stream.append(["set", self.__name, "findtime", self.__opts[opt]])
+			elif opt == "bantime":
+				stream.append(["set", self.__name, "bantime", self.__opts[opt]])
+			elif opt == "failregex":
+				stream.append(["set", self.__name, "failregex", self.__opts[opt]])
+			elif opt == "ignoreregex":
+				for regex in self.__opts[opt].split('\n'):
+					# Do not send a command if the rule is empty.
+					if regex != '':
+						stream.append(["set", self.__name, "addignoreregex", regex])
+		stream.extend(self.__filter.convert())
+		for action in self.__actions:
+			stream.extend(action.convert())
+		stream.insert(0, ["add", self.__name, backend])
+		return stream
+	
+	#@staticmethod
+	def splitAction(action):
+		m = JailReader.actionCRE.match(action)
+		d = dict()
+		if not m.group(2) == None:
+			# Huge bad hack :( This method really sucks. TODO Reimplement it.
+			actions = ""
+			escapeChar = None
+			allowComma = False
+			for c in m.group(2):
+				if c in ('"', "'") and not allowComma:
+					# Start
+					escapeChar = c
+					allowComma = True
+				elif c == escapeChar:
+					# End
+					escapeChar = None
+					allowComma = False
+				else:
+					if c == ',' and allowComma:
+						actions += "<COMMA>"
+					else:
+						actions += c
+			
+			# Split using ,
+			actionsSplit = actions.split(',')
+			# Replace the tag <COMMA> with ,
+			actionsSplit = [n.replace("<COMMA>", ',') for n in actionsSplit]
+			
+			for param in actionsSplit:
+				p = param.split('=')
+				try:
+					d[p[0].strip()] = p[1].strip()
+				except IndexError:
+					logSys.error("Invalid argument %s in '%s'" % (p, m.group(2)))
+		return [m.group(1), d]
+	splitAction = staticmethod(splitAction)

client/jailsreader.py

@@ -0,0 +1,87 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import logging
+from configreader import ConfigReader
+from jailreader import JailReader
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class JailsReader(ConfigReader):
+	
+	def __init__(self):
+		ConfigReader.__init__(self)
+		self.__jails = list()
+	
+	def read(self):
+		ConfigReader.read(self, "jail")
+	
+	def getOptions(self, section = None):
+		opts = []
+		self.__opts = ConfigReader.getOptions(self, "Definition", opts)
+
+		if section:
+			# Get the options of a specific jail.
+			jail = JailReader(section)
+			jail.read()
+			ret = jail.getOptions()
+			if ret:
+				if jail.isEnabled():
+					# We only add enabled jails
+					self.__jails.append(jail)
+			else:
+				logSys.error("Errors in jail '%s'. Skipping..." % section)
+				return False
+		else:
+			# Get the options of all jails.
+			for sec in self.sections():
+				jail = JailReader(sec)
+				jail.read()
+				ret = jail.getOptions()
+				if ret:
+					if jail.isEnabled():
+						# We only add enabled jails
+						self.__jails.append(jail)
+				else:
+					logSys.error("Errors in jail '" + sec + "'. Skipping...")
+					return False
+		return True
+	
+	def convert(self):
+		stream = list()
+		for opt in self.__opts:
+			if opt == "":
+				stream.append([])
+		# Convert jails
+		for jail in self.__jails:
+			stream.extend(jail.convert())
+		# Start jails
+		for jail in self.__jails:
+			stream.append(["start", jail.getName()])
+		
+		return stream
+		

common/__init__.py

@@ -1,6 +1,3 @@
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-
 # This file is part of Fail2Ban.
 #
 # Fail2Ban is free software; you can redistribute it and/or modify
@@ -15,11 +12,14 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
 # Author: Cyril Jaquier
 # 
+# $Revision$
 
 __author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"

common/helpers.py

@@ -1,8 +1,3 @@
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-"""Fail2Ban exceptions used by both client and server
-
-"""
 # This file is part of Fail2Ban.
 #
 # Fail2Ban is free software; you can redistribute it and/or modify
@@ -17,22 +12,27 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
-__author__ = "Cyril Jaquier, Yaroslav Halchenko"
-__copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2011-2012 Yaroslav Halchenko"
+# Author: Cyril Jaquier
+# Author: Arturo 'Buanzo' Busleiman
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2009 Cyril Jaquier"
 __license__ = "GPL"
 
 
-#
-# Jails
-#
-class DuplicateJailException(Exception):
-	pass
-
-
-class UnknownJailException(KeyError):
-	pass
-
-
-
+def formatExceptionInfo():
+    """ Author: Arturo 'Buanzo' Busleiman """
+    import sys
+    cla, exc = sys.exc_info()[:2]
+    excName = cla.__name__
+    try:
+        excArgs = exc.__dict__["args"]
+    except KeyError:
+        excArgs = str(exc)
+    return (excName, excArgs)

common/protocol.py

@@ -0,0 +1,134 @@
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+# Author: Cyril Jaquier
+# 
+# $Revision$
+
+__author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import textwrap
+
+##
+# Describes the protocol used to communicate with the server.
+
+protocol = [
+['', "BASIC", ""],
+["start", "starts the server and the jails"], 
+["reload", "reloads the configuration"], 
+["reload <JAIL>", "reloads the jail <JAIL>"], 
+["stop", "stops all jails and terminate the server"], 
+["status", "gets the current status of the server"], 
+["ping", "tests if the server is alive"], 
+['', "LOGGING", ""],
+["set loglevel <LEVEL>", "sets logging level to <LEVEL>. 0 is minimal, 4 is debug"], 
+["get loglevel", "gets the logging level"], 
+["set logtarget <TARGET>", "sets logging target to <TARGET>. Can be STDOUT, STDERR, SYSLOG or a file"], 
+["get logtarget", "gets logging target"], 
+['', "JAIL CONTROL", ""],
+["add <JAIL> <BACKEND>", "creates <JAIL> using <BACKEND>"], 
+["start <JAIL>", "starts the jail <JAIL>"], 
+["stop <JAIL>", "stops the jail <JAIL>. The jail is removed"], 
+["status <JAIL>", "gets the current status of <JAIL>"],
+['', "JAIL CONFIGURATION", ""],
+["set <JAIL> idle on|off", "sets the idle state of <JAIL>"], 
+["set <JAIL> addignoreip <IP>", "adds <IP> to the ignore list of <JAIL>"], 
+["set <JAIL> delignoreip <IP>", "removes <IP> from the ignore list of <JAIL>"], 
+["set <JAIL> addlogpath <FILE>", "adds <FILE> to the monitoring list of <JAIL>"], 
+["set <JAIL> dellogpath <FILE>", "removes <FILE> from the monitoring list of <JAIL>"],
+["set <JAIL> addfailregex <REGEX>", "adds the regular expression <REGEX> which must match failures for <JAIL>"], 
+["set <JAIL> delfailregex <INDEX>", "removes the regular expression at <INDEX> for failregex"], 
+["set <JAIL> addignoreregex <REGEX>", "adds the regular expression <REGEX> which should match pattern to exclude for <JAIL>"],
+["set <JAIL> delignoreregex <INDEX>", "removes the regular expression at <INDEX> for ignoreregex"], 
+["set <JAIL> findtime <TIME>", "sets the number of seconds <TIME> for which the filter will look back for <JAIL>"], 
+["set <JAIL> bantime <TIME>", "sets the number of seconds <TIME> a host will be banned for <JAIL>"], 
+["set <JAIL> banip <IP>", "manually Ban <IP> for <JAIL>"], 
+["set <JAIL> maxretry <RETRY>", "sets the number of failures <RETRY> before banning the host for <JAIL>"], 
+["set <JAIL> addaction <ACT>", "adds a new action named <NAME> for <JAIL>"], 
+["set <JAIL> delaction <ACT>", "removes the action <NAME> from <JAIL>"], 
+["set <JAIL> setcinfo <ACT> <KEY> <VALUE>", "sets <VALUE> for <KEY> of the action <NAME> for <JAIL>"], 
+["set <JAIL> delcinfo <ACT> <KEY>", "removes <KEY> for the action <NAME> for <JAIL>"], 
+["set <JAIL> actionstart <ACT> <CMD>", "sets the start command <CMD> of the action <ACT> for <JAIL>"], 
+["set <JAIL> actionstop <ACT> <CMD>", "sets the stop command <CMD> of the action <ACT> for <JAIL>"], 
+["set <JAIL> actioncheck <ACT> <CMD>", "sets the check command <CMD> of the action <ACT> for <JAIL>"], 
+["set <JAIL> actionban <ACT> <CMD>", "sets the ban command <CMD> of the action <ACT> for <JAIL>"],
+["set <JAIL> actionunban <ACT> <CMD>", "sets the unban command <CMD> of the action <ACT> for <JAIL>"], 
+['', "JAIL INFORMATION", ""],
+["get <JAIL> logpath", "gets the list of the monitored files for <JAIL>"],
+["get <JAIL> ignoreip", "gets the list of ignored IP addresses for <JAIL>"],
+["get <JAIL> failregex", "gets the list of regular expressions which matches the failures for <JAIL>"],
+["get <JAIL> ignoreregex", "gets the list of regular expressions which matches patterns to ignore for <JAIL>"],
+["get <JAIL> findtime", "gets the time for which the filter will look back for failures for <JAIL>"],
+["get <JAIL> bantime", "gets the time a host is banned for <JAIL>"],
+["get <JAIL> maxretry", "gets the number of failures allowed for <JAIL>"],
+["get <JAIL> addaction", "gets the last action which has been added for <JAIL>"],
+["get <JAIL> actionstart <ACT>", "gets the start command for the action <ACT> for <JAIL>"],
+["get <JAIL> actionstop <ACT>", "gets the stop command for the action <ACT> for <JAIL>"],
+["get <JAIL> actioncheck <ACT>", "gets the check command for the action <ACT> for <JAIL>"],
+["get <JAIL> actionban <ACT>", "gets the ban command for the action <ACT> for <JAIL>"],
+["get <JAIL> actionunban <ACT>", "gets the unban command for the action <ACT> for <JAIL>"],
+]
+
+##
+# Prints the protocol in a "man" format. This is used for the
+# "-h" output of fail2ban-client.
+
+def printFormatted():
+	INDENT=4
+	MARGIN=41
+	WIDTH=34
+	firstHeading = False
+	for m in protocol:
+		if m[0] == '' and firstHeading:
+			print
+		firstHeading = True
+		first = True
+		for n in textwrap.wrap(m[1], WIDTH):
+			if first:
+				line = ' ' * INDENT + m[0] + ' ' * (MARGIN - len(m[0])) + n
+				first = False
+			else:
+				line = ' ' * (INDENT + MARGIN) + n
+			print line
+
+##
+# Prints the protocol in a "mediawiki" format.
+
+def printWiki():
+	firstHeading = False
+	for m in protocol:
+		if m[0] == '':
+			if firstHeading:
+				print "|}"
+			__printWikiHeader(m[1], m[2])
+			firstHeading = True
+		else:
+			print "|-"
+			print "| <span style=\"white-space:nowrap;\"><tt>" + m[0] + "</tt></span> || || " + m[1]
+	print "|}"
+
+def __printWikiHeader(section, desc):
+	print
+	print "=== " + section + " ==="
+	print
+	print desc
+	print
+	print "{|"
+	print "| '''Command''' || || '''Description'''"

common/version.py

@@ -1,6 +1,3 @@
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-
 # This file is part of Fail2Ban.
 #
 # Fail2Ban is free software; you can redistribute it and/or modify
@@ -15,11 +12,16 @@
 #
 # You should have received a copy of the GNU General Public License
 # along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
 # Author: Cyril Jaquier
 # 
+# $Revision$
 
 __author__ = "Cyril Jaquier"
+__version__ = "$Revision$"
+__date__ = "$Date$"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"
+
+version = "0.8.4"

config/action.d/abuseipdb.conf

@@ -1,104 +0,0 @@
-# Fail2ban configuration file
-#
-# Action to report IP address to abuseipdb.com
-# You must sign up to obtain an API key from abuseipdb.com.
-#
-# NOTE: These reports may include sensitive Info.
-# If you want cleaner reports that ensure no user data see the helper script at the below website.
-#
-# IMPORTANT:
-#
-# Reporting an IP of abuse is a serious complaint. Make sure that it is
-# serious. Fail2ban developers and network owners recommend you only use this
-# action for:
-#   * The recidive where the IP has been banned multiple times
-#   * Where maxretry has been set quite high, beyond the normal user typing
-#     password incorrectly.
-#   * For filters that have a low likelihood of receiving human errors
-#
-# This action relies on a api_key being added to the above action conf,
-# and the appropriate categories set.
-#
-# Example, for ssh bruteforce (in section [sshd] of `jail.local`): 
-#   action = %(known/action)s
-#            abuseipdb[abuseipdb_apikey="my-api-key", abuseipdb_category="18,22"]
-#
-# See below for categories.
-#
-# Added to fail2ban by Andrew James Collett (ajcollett)
-
-## abuseIPDB Categories, `the abuseipdb_category` MUST be set in the jail.conf action call.
-# Example, for ssh bruteforce: action = %(action_abuseipdb)s[abuseipdb_category="18,22"]
-# ID	Title	Description
-# 3	  Fraud Orders
-# 4	  DDoS Attack
-# 9	  Open Proxy
-# 10	Web Spam
-# 11	Email Spam
-# 14	Port Scan
-# 18	Brute-Force
-# 19	Bad Web Bot
-# 20	Exploited Host
-# 21	Web App Attack
-# 22	SSH	Secure Shell (SSH) abuse. Use this category in combination with more specific categories.
-# 23	IoT Targeted
-# See https://abuseipdb.com/categories for more descriptions
-
-[Definition]
-
-# bypass action for restored tickets
-norestored = 1
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart =
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop =
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck =
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-#
-#          ** IMPORTANT! **
-#
-#          By default, this posts directly to AbuseIPDB's API, unfortunately
-#          this results in a lot of backslashes/escapes appearing in the
-#          reports. This also may include info like your hostname.
-#          If you have your own web server with PHP available, you can
-#          use my (Shaun's) helper PHP script by commenting out the first #actionban
-#          line below, uncommenting the second one, and pointing the URL at
-#          wherever you install the helper script. For the PHP helper script, see
-#          <https://wiki.shaunc.com/wikka.php?wakka=ReportingToAbuseIPDBWithFail2Ban>
-#
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = lgm=$(printf '%%.1000s\n...' "<matches>"); curl -sSf "https://api.abuseipdb.com/api/v2/report" -H "Accept: application/json" -H "Key: <abuseipdb_apikey>" --data-urlencode "comment=$lgm" --data-urlencode "ip=<ip>" --data "categories=<abuseipdb_category>"
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban =
-
-[Init]
-# Option:  abuseipdb_apikey
-# Notes    Your API key from abuseipdb.com
-# Values:  STRING  Default: None
-# Register for abuseipdb [https://www.abuseipdb.com], get api key and set below.
-# You will need to set the category in the action call.
-abuseipdb_apikey =

config/action.d/apf.conf

@@ -1,25 +0,0 @@
-# Fail2Ban configuration file
-# https://www.rfxn.com/projects/advanced-policy-firewall/
-#
-# Note: APF doesn't play nicely with other actions. It has been observed to
-# remove bans created by other iptables based actions. If you are going to use
-# this action, use it for all of your jails.
-#
-# DON'T MIX APF and other IPTABLES based actions
-[Definition]
-
-actionstart = 
-actionstop = 
-actioncheck = 
-actionban = apf --deny <ip> "banned by Fail2Ban <name>"
-actionunban = apf --remove <ip>
-
-[Init]
-
-# Name used in APF configuration
-#
-name = default
-
-# DEV NOTES:
-#
-# Author: Mark McKinstry

config/action.d/apprise.conf

@@ -1,49 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Chris Caron <lead2gold@gmail.com>
-#
-#
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed once at the start of Fail2Ban.
-# Values:  CMD
-#
-actionstart = printf %%b "The jail <name> as been started successfully." | <apprise> -t "[Fail2Ban] <name>: started on `uname -n`"
-
-# Option:  actionstop
-# Notes.:  command executed once at the end of Fail2Ban
-# Values:  CMD
-#
-actionstop = printf %%b "The jail <name> has been stopped." | <apprise> -t "[Fail2Ban] <name>: stopped on `uname -n`"
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck =
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = printf %%b "The IP <ip> has just been banned by Fail2Ban after <failures> attempts against <name>" | <apprise> -n "warning" -t "[Fail2Ban] <name>: banned <ip> from `uname -n`"
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban =
-
-[Init]
-
-# Define location of the default apprise configuration file to use
-#
-config = /etc/fail2ban/apprise.conf
-#
-apprise = apprise -c "<config>"

config/action.d/blocklist_de.conf

@@ -1,84 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Steven Hiscocks
-#
-#
-
-# Action to report IP address to blocklist.de
-# Blocklist.de must be signed up to at www.blocklist.de
-# Once registered, one or more servers can be added.
-# This action requires the server 'email address' and the associated apikey.
-#
-# From blocklist.de:
-#   www.blocklist.de is a free and voluntary service provided by a
-#   Fraud/Abuse-specialist, whose servers are often attacked on SSH-,
-#   Mail-Login-, FTP-, Webserver- and other services.
-#   The mission is to report all attacks to the abuse departments of the
-#   infected PCs/servers to ensure that the responsible provider can inform
-#   the customer about the infection and disable them
-#
-# IMPORTANT: 
-# 
-# Reporting an IP of abuse is a serious complaint. Make sure that it is
-# serious. Fail2ban developers and network owners recommend you only use this
-# action for:
-#   * The recidive where the IP has been banned multiple times
-#   * Where maxretry has been set quite high, beyond the normal user typing
-#     password incorrectly.
-#   * For filters that have a low likelihood of receiving human errors
-#
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart = 
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop =
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck =
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = curl --fail --data-urlencode "server=<email>" --data "apikey=<apikey>" --data "service=<service>" --data "ip=<ip>" --data-urlencode "logs=<matches><br>" --data 'format=text' --user-agent "<agent>" "https://www.blocklist.de/en/httpreports.html"
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban =
-
-# Option:  email
-# Notes    server email address, as per blocklist.de account
-# Values:  STRING  Default: None
-#
-#email =
-
-# Option:  apikey
-# Notes    your user blocklist.de user account apikey
-# Values:  STRING  Default: None
-#
-#apikey =
-
-# Option:  service
-# Notes    service name you are reporting on, typically aligns with filter name
-#          see http://www.blocklist.de/en/httpreports.html for full list
-# Values:  STRING  Default: None
-#
-#service =

config/action.d/bsd-ipfw.conf

@@ -1,94 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Nick Munger
-# Modified by: Ken Menzel
-#              Daniel Black (start/stop)
-#              Fabian Wenk (many ideas as per fail2ban users list)
-#
-# Ensure firewall_enable="YES" in the top of /etc/rc.conf
-#
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart = ipfw show | fgrep -c -m 1 -s 'table(<table>)' > /dev/null 2>&1 || (
-    num=$(ipfw show | awk 'BEGIN { b = <lowest_rule_num> } { if ($1 == b) { b = $1 + 1 } } END { print b }');
-    ipfw -q add "$num" <blocktype> <block> from table\(<table>\) to me <port>; echo "$num" > "<startstatefile>"
-  )
-
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop =  [ ! -f <startstatefile> ] || ( read num < "<startstatefile>" <br> ipfw -q delete $num <br> rm "<startstatefile>" )
-
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck = 
-
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-# requires an ipfw rule like "deny ip from table(1) to me"
-actionban = e=`ipfw table <table> add <ip> 2>&1`; x=$?; [ $x -eq 0 -o "$e" = 'ipfw: setsockopt(IP_FW_TABLE_XADD): File exists' ] || echo "$e" | grep -q "record already exists" || { echo "$e" 1>&2; exit $x; }
-
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban = e=`ipfw table <table> delete <ip> 2>&1`; x=$?; [ $x -eq 0 -o "$e" = 'ipfw: setsockopt(IP_FW_TABLE_XDEL): No such process' ] || echo "$e" | grep -q "record not found" || { echo "$e" 1>&2; exit $x; }
-
-[Init]
-# Option:  table
-# Notes:   The ipfw table to use. If a ipfw rule using this table already exists,
-#          this action will not create a ipfw rule to block it and the following
-#          options will have no effect.
-# Values:  NUM
-table = 1
-
-# Option:  port
-# Notes.:  Specifies port to monitor. Blank indicate block all ports.
-# Values:  [ NUM | STRING ]
-#
-port = 
-
-# Option:  startstatefile
-# Notes:   A file to indicate that the table rule that was added. Ensure it is unique per table.
-# Values:  STRING
-startstatefile = /var/run/fail2ban/ipfw-started-table_<table>
-
-# Option: block
-# Notes:  This is how much to block.
-#         Can be "ip", "tcp", "udp" or various other options.
-# Values: STRING
-block = ip
-
-# Option:  blocktype
-# Notes.:  How to block the traffic. Use a action from man 5 ipfw
-#          Common values: deny, unreach port, reset
-#          ACTION defination at the top of man ipfw for allowed values.
-# Values:  STRING
-#
-blocktype = unreach port
-
-# Option:  lowest_rule_num
-# Notes:   When fail2ban starts with action and there is no rule for the given table yet
-#          then fail2ban will start looking for an empty slot starting with this rule number.
-# Values:  NUM
-lowest_rule_num = 111
-
-

config/action.d/cloudflare.conf

@@ -1,88 +0,0 @@
-#
-# Author: Mike Rushton
-#
-# IMPORTANT
-#
-# Please set jail.local's permission to 640 because it contains your CF API key.
-#
-# This action depends on curl (and optionally jq).
-# Referenced from http://www.normyee.net/blog/2012/02/02/adding-cloudflare-support-to-fail2ban by NORM YEE
-#
-# To get your CloudFlare API Key: https://www.cloudflare.com/a/account/my-account
-#
-# CloudFlare API error codes: https://www.cloudflare.com/docs/host-api.html#s4.2
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart =
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop =
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck =
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-#          <failures>  number of failures
-#          <time>  unix timestamp of the ban time
-# Values:  CMD
-#
-# API v1
-#actionban = curl -s -o /dev/null https://www.cloudflare.com/api_json.html -d 'a=ban' -d 'tkn=<cftoken>' -d 'email=<cfuser>' -d 'key=<ip>'
-# API v4
-actionban = curl -s -o /dev/null -X POST <_cf_api_prms> \
-            -d '{"mode":"block","configuration":{"target":"<cftarget>","value":"<ip>"},"notes":"Fail2Ban <name>"}' \
-            <_cf_api_url>
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-#          <failures>  number of failures
-#          <time>  unix timestamp of the ban time
-# Values:  CMD
-#
-# API v1
-#actionunban = curl -s -o /dev/null https://www.cloudflare.com/api_json.html -d 'a=nul' -d 'tkn=<cftoken>' -d 'email=<cfuser>' -d 'key=<ip>'
-# API v4
-actionunban = id=$(curl -s -X GET <_cf_api_prms> \
-                   "<_cf_api_url>?mode=block&configuration_target=<cftarget>&configuration_value=<ip>&page=1&per_page=1&notes=Fail2Ban%%20<name>" \
-                   | { jq -r '.result[0].id' 2>/dev/null || tr -d '\n' | sed -nE 's/^.*"result"\s*:\s*\[\s*\{\s*"id"\s*:\s*"([^"]+)".*$/\1/p'; })
-              if [ -z "$id" ]; then echo "<name>: id for <ip> cannot be found"; exit 0; fi;
-              curl -s -o /dev/null -X DELETE <_cf_api_prms> "<_cf_api_url>/$id"
-
-_cf_api_url = https://api.cloudflare.com/client/v4/user/firewall/access_rules/rules
-_cf_api_prms = -H 'X-Auth-Email: <cfuser>' -H 'X-Auth-Key: <cftoken>' -H 'Content-Type: application/json'
-
-[Init]
-
-# If you like to use this action with mailing whois lines, you could use the composite action
-# action_cf_mwl predefined in jail.conf, just define in your jail:
-#
-# action = %(action_cf_mwl)s
-# # Your CF account e-mail
-# cfemail  = 
-# # Your CF API Key
-# cfapikey = 
-
-cftoken =
-
-cfuser =
-
-cftarget = ip
-
-[Init?family=inet6]
-cftarget = ip6

config/action.d/complain.conf

@@ -1,53 +1,30 @@
 # Fail2Ban configuration file
 #
-# Author: Russell Odom <russ@gloomytrousers.co.uk>, Daniel Black
+# Author: Russell Odom <russ@gloomytrousers.co.uk>
 # Sends a complaint e-mail to addresses listed in the whois record for an
 # offending IP address.
-# This uses the https://abusix.com/contactdb.html to lookup abuse contacts.
-#
-# DEPENDENCIES:
-# This requires the dig command from bind-utils
 #
 # You should provide the <logpath> in the jail config - lines from the log
 # matching the given IP address will be provided in the complaint as evidence.
 #
-# WARNING
-# -------
+# Note that we will try to use e-mail addresses that are most likely to be abuse
+# addresses (based on various keywords). If they aren't found we fall back on
+# any other addresses found in the whois record, with a few exceptions.
+# If no addresses are found, no e-mail is sent.
 #
-# Please do not use this action unless you are certain that fail2ban
-# does not result in "false positives" for your deployment.  False
-# positive reports could serve a mis-favor to the original cause by
-# flooding corresponding contact addresses, and complicating the work
-# of administration personnel responsible for handling (verified) legit
-# complains.
+# $Revision$
 #
-# Please consider using e.g. sendmail-whois-lines.conf action which
-# would send the reports with relevant information to you, so the
-# report could be first reviewed and then forwarded to a corresponding
-# contact if legit.
-#
-
-
-[INCLUDES]
-
-before = helpers-common.conf
 
 [Definition]
 
-# Used in test cases for coverage internal transformations
-debug = 0
-
-# bypass ban/unban for restored tickets
-norestored = 1
-
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart =
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop =
@@ -61,38 +38,30 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <failtime>  unix timestamp of the last failure
+#          <bantime>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = oifs=${IFS};
-            RESOLVER_ADDR="%(addr_resolver)s"
-            if [ "<debug>" -gt 0 ]; then echo "try to resolve $RESOLVER_ADDR"; fi
-            ADDRESSES=$(dig +short -t txt -q $RESOLVER_ADDR | tr -d '"')
-            IFS=,; ADDRESSES=$(echo $ADDRESSES)
-            IFS=${oifs}
-            IP=<ip>
+actionban = ADDRESSES=`whois <ip> | perl -e 'while (<STDIN>) { next if /^changed|@(ripe|apnic)\.net/io; $m += (/abuse|trouble:|report|spam|security/io?3:0); if (/([a-z0-9_\-\.+]+@[a-z0-9\-]+(\.[[a-z0-9\-]+)+)/io) { while (s/([a-z0-9_\-\.+]+@[a-z0-9\-]+(\.[[a-z0-9\-]+)+)//io) { if ($m) { $a{lc($1)}=$m } else { $b{lc($1)}=$m } } $m=0 } else { $m && --$m } } if (%%a) {print join(",",keys(%%a))} else {print join(",",keys(%%b))}'`
+	    IP=<ip>
             if [ ! -z "$ADDRESSES" ]; then
-                ( printf %%b "<message>\n"; date '+Note: Local timezone is %%z (%%Z)'; 
-                  printf %%b "\nLines containing failures of <ip> (max <grepmax>)\n";
-                  %(_grep_logs)s;
-                ) | <mailcmd> "Abuse from <ip>" <mailargs> $ADDRESSES
+                (printf %%b "<message>\n"; date '+Note: Local timezone is %%z (%%Z)'; grep '<ip>' <logpath>) | <mailcmd> "Abuse from <ip>" $ADDRESSES <mailargs>
             fi
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <bantime>  unix timestamp of the ban time
+#          <unbantime>  unix timestamp of the unban time
 # Values:  CMD
 #
 actionunban =
 
-# Server as resolver used in dig command
-#
-addr_resolver = <ip-rev>abuse-contacts.abusix.org
-
-# Default message used for abuse content
-#
-message = Dear Sir/Madam,\n\nWe have detected abuse from the IP address $IP, which according to a abusix.com is on your network. We would appreciate if you would investigate and take action as appropriate.\n\nLog lines are given below, but please ask if you require any further information.\n\n(If you are not the correct person to contact about this please accept our apologies - your e-mail address was extracted from the whois record by an automated process.)\n\n This mail was generated by Fail2Ban.\nThe recipient address of this report was provided by the Abuse Contact DB by abusix.com. abusix.com does not maintain the content of the database. All information which we pass out, derives from the RIR databases and is processed for ease of use. If you want to change or report non working abuse contacts please contact the appropriate RIR. If you have any further question, contact abusix.com directly via email (info@abusix.com). Information about the Abuse Contact Database can be found here: https://abusix.com/global-reporting/abuse-contact-db\nabusix.com is neither responsible nor liable for the content or accuracy of this message.\n
+[Init]
+message = Dear Sir/Madam,\n\nWe have detected abuse from the IP address $IP, which according to a whois lookup is on your network. We would appreciate if you would investigate and take action as appropriate.\n\nLog lines are given below, but please ask if you require any further information.\n\n(If you are not the correct person to contact about this please accept our apologies - your e-mail address was extracted from the whois record by an automated process. This mail was generated by Fail2Ban.)\n
 
 # Path to the log files which contain relevant lines for the abuser IP
 #
@@ -100,9 +69,9 @@ logpath = /dev/null
 
 # Option:  mailcmd
 # Notes.:  Your system mail command. Is passed 2 args: subject and recipient
-# Values:  CMD
+# Values:  CMD  Default: mail -s
 #
-mailcmd = mail -E 'set escape' -s
+mailcmd = mail -s
 
 # Option:  mailargs
 # Notes.:  Additional arguments to mail command. e.g. for standard Unix mail:
@@ -111,11 +80,7 @@ mailcmd = mail -E 'set escape' -s
 #          Appear to come from a different address - the '--' indicates
 #          arguments to be passed to Sendmail:
 #              -- -f me@example.com
-# Values:  [ STRING ]
+# Values:  [ STRING ]  Default: (empty)
 #
 mailargs =
 
-# Number of log lines to include in the email
-#
-#grepmax = 1000
-#grepopts = -m <grepmax>

config/action.d/dshield.conf

@@ -25,24 +25,22 @@
 # configured at DShield), and <lines>/<minreportinterval>/<maxbufferage> (to
 # configure how often the buffer is flushed).
 #
+# $Revision$
 
 [Definition]
 
-# bypass ban/unban for restored tickets
-norestored = 1
-
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart =
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = if [ -f <tmpfile>.buffer ]; then
-                 cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ `date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'` Fail2Ban" <mailargs> <dest>
+                 cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ `date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'` Fail2Ban" <dest> <mailargs>
                  date +%%s > <tmpfile>.lastsent
              fi
              rm -f <tmpfile>.buffer <tmpfile>.first
@@ -56,7 +54,9 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 # See http://www.dshield.org/specs.html for more on report format/notes
@@ -83,7 +83,7 @@ actionban = TZONE=`date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'`
             LASTREPORT=$(($NOW - `cat <tmpfile>.lastsent`))
             LINES=$( wc -l <tmpfile>.buffer | awk '{ print $1 }' )
             if [ $LINES -ge <lines> && $LASTREPORT -gt <minreportinterval> ] || [ $LOGAGE -gt <maxbufferage> ]; then
-                cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ $TZONE Fail2Ban" <mailargs> <dest>
+                cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ $TZONE Fail2Ban" <dest> <mailargs>
                 rm -f <tmpfile>.buffer <tmpfile>.first
                 echo $NOW > <tmpfile>.lastsent
             fi
@@ -91,14 +91,16 @@ actionban = TZONE=`date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'`
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionunban = if [ -f <tmpfile>.first ]; then
                   NOW=`date +%%s`
                   LOGAGE=$(($NOW - `cat <tmpfile>.first`))
                   if [ $LOGAGE -gt <maxbufferage> ]; then
-                      cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ `date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'` Fail2Ban" <mailargs> <dest>
+                      cat <tmpfile>.buffer | <mailcmd> "FORMAT DSHIELD USERID <userid> TZ `date +%%z | sed 's/\([+-]..\)\(..\)/\1:\2/'` Fail2Ban" <dest> <mailargs>
                       rm -f <tmpfile>.buffer <tmpfile>.first
                       echo $NOW > <tmpfile>.lastsent
                   fi
@@ -109,26 +111,26 @@ actionunban = if [ -f <tmpfile>.first ]; then
 # Option:  port
 # Notes.:  The target port for the attack (numerical). MUST be provided in the
 #          jail config, as it cannot be detected here.
-# Values:  [ NUM ]
+# Values:  [ NUM ]  Default: ???
 #
 port = ???
 
 # Option:  userid
-# Notes.:  Your DShield user ID. Should be provided either in the jail config or
+# Notes.:  Your DSheild user ID. Should be provided either in the jail config or
 #          in a .local file.
 #          Register at https://secure.dshield.org/register.html
-# Values:  [ NUM ]
+# Values:  [ NUM ]  Default: 0
 #
 userid = 0
 
 # Option:  myip
-# Notes.:  The target IP for the attack (your public IP). Should be provided
+# Notes.:  TThe target IP for the attack (your public IP). Should be provided
 #          either in the jail config or in a .local file unless your PUBLIC IP
 #          is the first IP assigned to eth0
 # Values:  [ an IP address ]  Default: Tries to find the IP address of eth0,
 #          which in most cases will be a private IP, and therefore incorrect
 #
-myip = `ip -4 addr show dev eth0 | grep inet | head -n 1 | sed -r 's/.*inet ([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}).*/\1/'`
+myip = `ip -4 addr show dev eth0 | grep inet | head -1 | sed -r 's/.*inet ([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}).*/\1/'`
 
 # Option:  protocol
 # Notes.:  The protocol over which the attack is happening
@@ -140,7 +142,7 @@ protocol = tcp
 # Notes.:  How many lines to buffer before making a report. Regardless of this,
 #          reports are sent a minimum of <minreportinterval> apart, or if the
 #          buffer contains an event over <maxbufferage> old, or on shutdown
-# Values:  [ NUM ]
+# Values:  [ NUM ]  Default: 50
 #
 lines = 50
 
@@ -148,7 +150,7 @@ lines = 50
 # Notes.:  Minimum period (in seconds) that must elapse before we submit another
 #          batch of reports. DShield request a minimum of 1 hour (3600 secs)
 #          between reports.
-# Values:  [ NUM ]
+# Values:  [ NUM ]  Default: 3600
 #
 minreportinterval = 3600
 
@@ -157,29 +159,30 @@ minreportinterval = 3600
 #          submit the batch, even if we haven't reached <lines> yet. Note that
 #          this is only checked on each ban/unban, and that we always send
 #          anything in the buffer on shutdown. Must be greater than
-# Values:  [ NUM ]
+#          <minreportinterval>.
+# Values:  [ NUM ]  Default: 21600 (6 hours)
 #
 maxbufferage = 21600
 
 # Option:  srcport
 # Notes.:  The source port of the attack. You're unlikely to have this info, so
 #          you can leave the default
-# Values:  [ NUM ]
+# Values:  [ NUM ]  Default: ???
 #
 srcport = ???
 
 # Option:  tcpflags
 # Notes.:  TCP flags on attack. You're unlikely to have this info, so you can
 #          leave empty
-# Values:  [ STRING ]
+# Values:  [ STRING ]  Default: (empty)
 #
 tcpflags =
 
 # Option:  mailcmd
 # Notes.:  Your system mail command. Is passed 2 args: subject and recipient
-# Values:  CMD
+# Values:  CMD  Default: mail -s
 #
-mailcmd = mail -E 'set escape' -s
+mailcmd = mail -s
 
 # Option:  mailargs
 # Notes.:  Additional arguments to mail command. e.g. for standard Unix mail:
@@ -189,19 +192,19 @@ mailcmd = mail -E 'set escape' -s
 #          the one configured at DShield - the '--' indicates arguments to be
 #          passed to Sendmail):
 #              -- -f me@example.com
-# Values:  [ STRING ]
+# Values:  [ STRING ]  Default: (empty)
 #
 mailargs =
 
 # Option:  dest
 # Notes.:  Destination e-mail address for reports
-# Values:  [ STRING ]
+# Values:  [ STRING ]  Default: reports@dshield.org
 #
 dest = reports@dshield.org
 
 # Option:  tmpfile
 # Notes.:  Base name of temporary files used for buffering
-# Values:  [ STRING ]
+# Values:  [ STRING ]  Default: /tmp/fail2ban-dshield
 #
-tmpfile = /var/run/fail2ban/tmp-dshield
+tmpfile = /tmp/fail2ban-dshield
 

config/action.d/dummy.conf

@@ -2,31 +2,23 @@
 #
 # Author: Cyril Jaquier
 #
+# $Revision$
 #
 
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = if [ ! -z '<target>' ]; then touch <target>; fi;
-              printf %%b "<init>\n" <to_target>
-              echo "%(debug)s started"
-
-# Option:  actionflush
-# Notes.:  command executed once to flush (clear) all IPS, by shutdown (resp. by stop of the jail or this action)
-# Values:  CMD
-#
-actionflush = printf %%b "-*\n" <to_target>
-              echo "%(debug)s clear all"
+actionstart = touch /tmp/fail2ban.dummy
+              printf %%b "<init>\n" >> /tmp/fail2ban.dummy
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = if [ ! -z '<target>' ]; then rm -f <target>; fi;
-             echo "%(debug)s stopped"
+actionstop = rm -f /tmp/fail2ban.dummy
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
@@ -37,27 +29,24 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = printf %%b "+<ip>\n" <to_target>
-            echo "%(debug)s banned <ip> (family: <family>)"
+actionban = printf %%b "+<ip>\n" >> /tmp/fail2ban.dummy
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = printf %%b "-<ip>\n" <to_target>
-              echo "%(debug)s unbanned <ip> (family: <family>)"
-
-
-debug = [<name>] <actname> <target> --
+actionunban = printf %%b "-<ip>\n" >> /tmp/fail2ban.dummy
 
 [Init]
 
 init = 123
 
-target = /var/run/fail2ban/fail2ban.dummy
-to_target = >> <target>

config/action.d/firewallcmd-allports.conf

@@ -1,45 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Donald Yandt 
-# Because of the --remove-rules in stop this action requires firewalld-0.3.8+
-
-
-[INCLUDES]
-
-before = firewallcmd-common.conf
-
-[Definition]
-
-actionstart = firewall-cmd --direct --add-chain <family> filter f2b-<name>
-              firewall-cmd --direct --add-rule <family> filter f2b-<name> 1000 -j RETURN
-              firewall-cmd --direct --add-rule <family> filter <chain> 0 -j f2b-<name>
-
-actionstop = firewall-cmd --direct --remove-rule <family> filter <chain> 0 -j f2b-<name>
-             firewall-cmd --direct --remove-rules <family> filter f2b-<name>
-             firewall-cmd --direct --remove-chain <family> filter f2b-<name>
-
-
-# Example actioncheck: firewall-cmd --direct --get-chains ipv4 filter | sed -e 's, ,\n,g' | grep -q '^f2b-recidive$'
-
-actioncheck = firewall-cmd --direct --get-chains <family> filter | sed -e 's, ,\n,g' | grep -q '^f2b-<name>$'
-
-actionban = firewall-cmd --direct --add-rule <family> filter f2b-<name> 0 -s <ip> -j <blocktype>
-
-actionunban = firewall-cmd --direct --remove-rule <family> filter f2b-<name> 0 -s <ip> -j <blocktype>
-
-# DEV NOTES:
-#
-# Author: Donald Yandt 
-# Uses "FirewallD" instead of the "iptables daemon".
-#
-#
-# Output:
-
-# actionstart:
-# $ firewall-cmd --direct --add-chain ipv4 filter f2b-recidive
-# success
-# $ firewall-cmd --direct --add-rule ipv4 filter f2b-recidive 1000 -j RETURN
-# success
-# $ sudo firewall-cmd --direct --add-rule ipv4 filter INPUT_direct 0 -j f2b-recidive
-# success
-

config/action.d/firewallcmd-common.conf

@@ -1,76 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Donald Yandt
-#
-
-[Init]
-
-# Option:  name
-# Notes    Default name of the chain
-# Values:  STRING
-name = default
-
-# Option   port
-# Notes    Can also use port numbers separated by a comma and in rich-rules comma and/or space.
-# Value    STRING Default: 1:65535
-port = 1:65535
-
-# Option:  protocol
-# Notes    [ tcp | udp | icmp | all ]
-# Values:  STRING Default: tcp
-protocol = tcp
-
-# Option:  family(ipv4)
-# Notes    specifies the socket address family type
-# Values:  STRING  
-family = ipv4
-
-# Option:  chain
-# Notes    specifies the firewalld chain to which the Fail2Ban rules should be
-#          added
-# Values:  STRING  Default: INPUT_direct
-chain = INPUT_direct
-
-# Option:  zone
-# Notes    use command firewall-cmd --get-active-zones to see a list of all active zones. See firewalld man pages for more information on zones
-# Values:  STRING  Default: public
-zone = public
-
-# Option:  service
-# Notes    use command firewall-cmd --get-services to see a list of services available
-#          Examples services: amanda-client amanda-k5-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns freeipa-ldap freeipa-ldaps 
-#          freeipa-replication ftp high-availability http https imaps ipp ipp-client ipsec iscsi-target kadmin kerberos 
-#          kpasswd ldap ldaps libvirt libvirt-tls mdns mosh mountd ms-wbt mysql nfs ntp openvpn pmcd pmproxy pmwebapi pmwebapis pop3s 
-#          postgresql privoxy proxy-dhcp puppetmaster radius rpc-bind rsyncd samba samba-client sane smtp squid ssh synergy 
-#          telnet tftp tftp-client tinc tor-socks transmission-client vdsm vnc-server wbem-https xmpp-bosh xmpp-client xmpp-local xmpp-server
-# Values:  STRING Default: ssh 
-service = ssh
-
-# Option:  rejecttype (ipv4)
-# Notes    See iptables/firewalld man pages for ipv4 reject types. 
-# Values:  STRING
-rejecttype = icmp-port-unreachable
-
-# Option:  blocktype (ipv4/ipv6)
-# Notes    See iptables/firewalld man pages for jump targets. Common values are REJECT, 
-#          REJECT --reject-with icmp-port-unreachable, DROP
-# Values:  STRING
-blocktype = REJECT --reject-with <rejecttype>
-
-# Option:  rich-blocktype (ipv4/ipv6)
-# Notes    See firewalld man pages for jump targets. Common values are reject, 
-#          reject type="icmp-port-unreachable", drop
-# Values:  STRING
-rich-blocktype = reject type='<rejecttype>'
-
-[Init?family=inet6]
-
-# Option:  family(ipv6)
-# Notes    specifies the socket address family type
-# Values:  STRING  
-family = ipv6
-
-# Option:  rejecttype (ipv6)
-# Note:    See iptables/firewalld man pages for ipv6 reject types. 
-# Values:  STRING
-rejecttype = icmp6-port-unreachable

config/action.d/firewallcmd-ipset.conf

@@ -1,121 +0,0 @@
-# Fail2Ban action file for firewall-cmd/ipset
-#
-# This requires:
-# ipset (package: ipset)
-# firewall-cmd (package: firewalld)
-#
-# This is for ipset protocol 6 (and hopefully later) (ipset v6.14).
-# Use ipset -V to see the protocol and version.
-#
-# IPset was a feature introduced in the linux kernel 2.6.39 and 3.0.0 kernels.
-#
-# If you are running on an older kernel you make need to patch in external
-# modules.
-
-[INCLUDES]
-
-before = firewallcmd-common.conf
-
-[Definition]
-
-actionstart = <ipstype_<ipsettype>/actionstart>
-              firewall-cmd --direct --add-rule <family> filter <chain> 0 <actiontype> -m set --match-set <ipmset> src -j <blocktype>
-
-actionflush = <ipstype_<ipsettype>/actionflush>
-
-actionstop = firewall-cmd --direct --remove-rule <family> filter <chain> 0 <actiontype> -m set --match-set <ipmset> src -j <blocktype>
-             <actionflush>
-             <ipstype_<ipsettype>/actionstop>
-
-actionban = <ipstype_<ipsettype>/actionban>
-
-# actionprolong = %(actionban)s
-
-actionunban = <ipstype_<ipsettype>/actionunban>
-
-[ipstype_ipset]
-
-actionstart = ipset create <ipmset> hash:ip timeout <default-ipsettime> <familyopt>
-
-actionflush = ipset flush <ipmset>
-
-actionstop = ipset destroy <ipmset>
-
-actionban = ipset add <ipmset> <ip> timeout <ipsettime> -exist
-
-actionunban = ipset del <ipmset> <ip> -exist
-
-[ipstype_firewalld]
-
-actionstart = firewall-cmd --direct --new-ipset=<ipmset> --type=hash:ip --option=timeout=<default-ipsettime> <firewalld_familyopt>
-
-# TODO: there doesn't seem to be an explicit way to invoke the ipset flush function using firewall-cmd
-actionflush = 
-
-actionstop = firewall-cmd --direct --delete-ipset=<ipmset>
-
-actionban = firewall-cmd --ipset=<ipmset> --add-entry=<ip>
-
-actionunban = firewall-cmd --ipset=<ipmset> --remove-entry=<ip>
-
-[Init]
-
-# Option:  chain
-# Notes    specifies the iptables chain to which the fail2ban rules should be
-#          added
-# Values:  [ STRING ]
-#
-chain = INPUT_direct
-
-# Option: default-ipsettime
-# Notes:  specifies default timeout in seconds (handled default ipset timeout only)
-# Values:  [ NUM ]  Default: 0 (no timeout, managed by fail2ban by unban)
-default-ipsettime = 0
-
-# Option: ipsettime
-# Notes:  specifies ticket timeout (handled ipset timeout only)
-# Values:  [ NUM ]  Default: 0 (managed by fail2ban by unban)
-ipsettime = 0
-
-# expresion to caclulate timeout from bantime, example:
-# banaction = %(known/banaction)s[ipsettime='<timeout-bantime>']
-timeout-bantime = $([ "<bantime>" -le 2147483 ] && echo "<bantime>" || echo 0)
-
-# Option: ipsettype
-# Notes.: defines type of ipset used for match-set (firewalld or ipset)
-# Values: firewalld or ipset
-# Default: ipset
-ipsettype = ipset
-
-# Option: actiontype
-# Notes.: defines additions to the blocking rule
-# Values: leave empty to block all attempts from the host
-# Default: Value of the multiport
-actiontype = <multiport>
-
-# Option: allports
-# Notes.: default addition to block all ports
-# Usage.: use in jail config:  banaction = firewallcmd-ipset[actiontype=<allports>]
-#         for all protocols:   banaction = firewallcmd-ipset[actiontype=""]
-allports = -p <protocol>
-
-# Option: multiport
-# Notes.: addition to block access only to specific ports
-# Usage.: use in jail config:  banaction = firewallcmd-ipset[actiontype=<multiport>]
-multiport = -p <protocol> -m multiport --dports <port>
-
-ipmset = f2b-<name>
-familyopt =
-firewalld_familyopt =
-
-[Init?family=inet6]
-
-ipmset = f2b-<name>6
-familyopt = family inet6
-firewalld_familyopt = --option=family=inet6
-
-
-# DEV NOTES:
-#
-# Author: Edgar Hoch, Daniel Black, Sergey Brester and Mihail Politaev
-# firewallcmd-new / iptables-ipset-proto6 combined for maximium goodness

config/action.d/firewallcmd-multiport.conf

@@ -1,26 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Donald Yandt 
-# Because of the --remove-rules in stop this action requires firewalld-0.3.8+
-
-[INCLUDES]
-
-before = firewallcmd-common.conf
-
-[Definition]
-
-actionstart = firewall-cmd --direct --add-chain <family> filter f2b-<name>
-              firewall-cmd --direct --add-rule <family> filter f2b-<name> 1000 -j RETURN
-              firewall-cmd --direct --add-rule <family> filter <chain> 0 -m conntrack --ctstate NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
-
-actionstop = firewall-cmd --direct --remove-rule <family> filter <chain> 0 -m conntrack --ctstate NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
-             firewall-cmd --direct --remove-rules <family> filter f2b-<name>
-             firewall-cmd --direct --remove-chain <family> filter f2b-<name>
-
-# Example actioncheck: firewall-cmd --direct --get-chains ipv4 filter | sed -e 's, ,\n,g' | grep -q '^f2b-apache-modsecurity$'
-
-actioncheck = firewall-cmd --direct --get-chains <family> filter | sed -e 's, ,\n,g' | grep -q '^f2b-<name>$'
-
-actionban = firewall-cmd --direct --add-rule <family> filter f2b-<name> 0 -s <ip> -j <blocktype>
-
-actionunban = firewall-cmd --direct --remove-rule <family> filter f2b-<name> 0 -s <ip> -j <blocktype>

config/action.d/firewallcmd-new.conf

@@ -1,47 +0,0 @@
-# Fail2Ban configuration file
-#
-# Because of the --remove-rules in stop this action requires firewalld-0.3.8+
-
-[INCLUDES]
-
-before = firewallcmd-common.conf
-
-[Definition]
-
-actionstart = firewall-cmd --direct --add-chain <family> filter f2b-<name>
-              firewall-cmd --direct --add-rule <family> filter f2b-<name> 1000 -j RETURN
-              firewall-cmd --direct --add-rule <family> filter <chain> 0 -m state --state NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
-
-actionstop = firewall-cmd --direct --remove-rule <family> filter <chain> 0 -m state --state NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
-             firewall-cmd --direct --remove-rules <family> filter f2b-<name>
-             firewall-cmd --direct --remove-chain <family> filter f2b-<name>
-
-actioncheck = firewall-cmd --direct --get-chains <family> filter | sed -e 's, ,\n,g' | grep -q 'f2b-<name>$'
-
-actionban = firewall-cmd --direct --add-rule <family> filter f2b-<name> 0 -s <ip> -j <blocktype>
-
-actionunban = firewall-cmd --direct --remove-rule <family> filter f2b-<name> 0 -s <ip> -j <blocktype>
-
-# DEV NOTES:
-#
-# Author: Edgar Hoch
-# Copied from iptables-new.conf and modified for use with firewalld by Edgar Hoch.
-#  It uses "firewall-cmd" instead of "iptables".
-#
-# Output:
-# 
-# $ firewall-cmd --direct --add-chain ipv4 filter fail2ban-name
-# success
-# $ firewall-cmd --direct --add-rule ipv4 filter fail2ban-name 1000 -j RETURN
-# success
-# $ sudo firewall-cmd --direct --add-rule ipv4 filter INPUT_direct 0 -m state --state NEW -p tcp -m multiport --dports 22 -j fail2ban-name
-# success
-# $ firewall-cmd --direct --get-chains ipv4 filter
-# fail2ban-name
-# $ firewall-cmd --direct --get-chains ipv4 filter  | od -h
-# 0000000 6166 6c69 6232 6e61 6e2d 6d61 0a65
-# $ firewall-cmd --direct --get-chains ipv4 filter | grep -Eq 'fail2ban-name( |$)' ; echo $?
-# 0
-# $ firewall-cmd -V
-# 0.3.8
-

config/action.d/firewallcmd-rich-logging.conf

@@ -1,29 +0,0 @@
-# Fail2Ban configuration file
-#
-# Authors: Donald Yandt, Sergey G. Brester
-# 
-# Because of the rich rule commands requires firewalld-0.3.1+
-# This action uses firewalld rich-rules which gives you a cleaner iptables since it stores rules according to zones and not
-# by chain. So for an example all deny rules will be listed under <zone>_deny and all log rules under <zone>_log. 
-#
-# Also this action logs banned access attempts so you can filter that and increase ban time for offenders.
-#
-# If you use the --permanent rule you get a xml file in /etc/firewalld/zones/<zone>.xml that can be shared and parsed easliy
-#
-# This is an derivative of firewallcmd-rich-rules.conf, see there for details and other parameters.
-
-[INCLUDES]
-
-before = firewallcmd-rich-rules.conf
-
-[Definition]
-
-rich-suffix = log prefix='f2b-<name>' level='<level>' limit value='<rate>/m' <rich-blocktype>
-
-[Init]
-
-# log levels are "emerg", "alert", "crit", "error", "warning", "notice", "info" or "debug"
-level = info
-
-# log rate per minute
-rate = 1

config/action.d/firewallcmd-rich-rules.conf

@@ -1,44 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Donald Yandt 
-# 
-# Because of the rich rule commands requires firewalld-0.3.1+
-# This action uses firewalld rich-rules which gives you a cleaner iptables since it stores rules according to zones and not
-# by chain. So for an example all deny rules will be listed under <zone>_deny. 
-#
-# If you use the --permanent rule you get a xml file in /etc/firewalld/zones/<zone>.xml that can be shared and parsed easliy
-#
-# Example commands to view rules:
-# firewall-cmd [--zone=<zone>] --list-rich-rules
-# firewall-cmd [--zone=<zone>] --list-all
-# firewall-cmd [--zone=zone] --query-rich-rule='rule'
-
-[INCLUDES]
-
-before = firewallcmd-common.conf
-
-[Definition]
-
-actionstart = 
-
-actionstop = 
-
-actioncheck = 
-
-#you can also use zones and/or service names. 
-#
-# zone example: 
-# firewall-cmd --zone=<zone> --add-rich-rule="rule family='ipv4' source address='<ip>' port port='<port>' protocol='<protocol>' <rich-blocktype>"
-#
-# service name example:
-# firewall-cmd --zone=<zone> --add-rich-rule="rule family='ipv4' source address='<ip>' service name='<service>' <rich-blocktype>"
-#
-# Because rich rules can only handle single or a range of ports we must split ports and execute the command for each port. Ports can be single and ranges separated by a comma or space for an example: http, https, 22-60, 18 smtp 
-
-fwcmd_rich_rule = rule family='<family>' source address='<ip>' port port='$p' protocol='<protocol>' %(rich-suffix)s
-
-actionban = ports="<port>"; for p in $(echo $ports | tr ", " " "); do firewall-cmd --add-rich-rule="%(fwcmd_rich_rule)s"; done
-	   
-actionunban = ports="<port>"; for p in $(echo $ports | tr ", " " "); do firewall-cmd --remove-rich-rule="%(fwcmd_rich_rule)s"; done
-
-rich-suffix = <rich-blocktype>

config/action.d/helpers-common.conf

@@ -1,17 +0,0 @@
-[DEFAULT]
-
-# Usage:
-#   _grep_logs_args = 'test'
-#   (printf %%b "Log-excerpt contains 'test':\n"; %(_grep_logs)s; printf %%b "Log-excerpt contains 'test':\n") | mail ...
-#
-_grep_logs = logpath="<logpath>"; grep <grepopts> %(_grep_logs_args)s $logpath | <greplimit>
-# options `-wF` used to match only whole words and fixed string (not as pattern)
-_grep_logs_args = -wF "<ip>"
-
-# Used for actions, that should not by executed if ticket was restored:
-_bypass_if_restored = if [ '<restored>' = '1' ]; then exit 0; fi;
-
-[Init]
-greplimit = tail -n <grepmax>
-grepmax = 1000
-grepopts = -m <grepmax>

config/action.d/hostsdeny.conf

@@ -1,20 +1,20 @@
 # Fail2Ban configuration file
 #
 # Author: Cyril Jaquier
-# Edited for cross platform by: James Stout, Yaroslav Halchenko and Daniel Black
 #
+# $Revision$
 #
 
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart = 
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = 
@@ -28,18 +28,23 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = printf %%b "<daemon_list>: <ip_value>\n" >> <file>
+actionban = IP=<ip> &&
+            printf %%b "ALL: $IP\n" >> <file>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = IP=$(echo "<ip_value>" | sed 's/[][\.]/\\\0/g') && sed -i "/^<daemon_list>: $IP$/d" <file>
+actionunban = IP=<ip> && sed -i.old /ALL:\ $IP/d <file>
 
 [Init]
 
@@ -48,15 +53,3 @@ actionunban = IP=$(echo "<ip_value>" | sed 's/[][\.]/\\\0/g') && sed -i "/^<daem
 # Values:  STR  Default:  /etc/hosts.deny
 #
 file = /etc/hosts.deny
-
-# Option:  daemon_list
-# Notes:   The list of services that this action will deny. See the man page
-#          for hosts.deny/hosts_access. Default is all services.
-# Values:  STR  Default: ALL
-daemon_list = ALL
-
-# internal variable IP (to differentiate the IPv4 and IPv6 syntax, where it is enclosed in brackets):
-ip_value = <ip>
-
-[Init?family=inet6]
-ip_value = [<ip>]

config/action.d/ipfilter.conf

@@ -9,7 +9,7 @@
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 # enable IPF if not already enabled
@@ -17,7 +17,7 @@ actionstart = /sbin/ipf -E
 
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 # don't disable IPF with "/sbin/ipf -D", there may be other filters in use
@@ -34,25 +34,24 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = echo block <blocktype> in quick from <ip>/32 | /sbin/ipf -f -
+actionban = echo block in quick from <ip>/32 | /sbin/ipf -f -
 
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 # note -r option used to remove matching rule
-actionunban = echo block <blocktype> in quick from <ip>/32 | /sbin/ipf -r -f -
+actionunban = echo block in quick from <ip>/32 | /sbin/ipf -r -f -
 
 [Init]
 
-# Option: Blocktype
-# Notes : This is the return-icmp[return-code] mentioned in the ipf man page section 5. Keep this quoted to prevent
-#         Shell expansion. This should be blank (unquoted) to drop the packet.
-# Values: STRING
-blocktype = "return-icmp(port-unr)"

config/action.d/ipfw.conf

@@ -3,19 +3,20 @@
 # Author: Nick Munger
 # Modified by: Cyril Jaquier
 #
+# $Revision$
 #
 
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart = 
 
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = 
@@ -31,19 +32,23 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = ipfw add <blocktype> tcp from <ip> to <localhost> <port>
+actionban = ipfw add deny tcp from <ip> to <localhost> <port>
 
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = ipfw delete `ipfw list | grep -i "[^0-9]<ip>[^0-9]" | awk '{print $1;}'`
+actionunban = ipfw delete `ipfw list | grep -i <ip> | awk '{print $1;}'`
 
 [Init]
 
@@ -58,11 +63,3 @@ port = ssh
 # Values:  IP
 #
 localhost = 127.0.0.1
-
-
-# Option:  blocktype
-# Notes.:  How to block the traffic. Use a action from man 5 ipfw
-#          Common values: deny, unreach port, reset
-# Values:  STRING
-#
-blocktype = unreach port

config/action.d/iptables-allports.conf

@@ -4,52 +4,62 @@
 # Modified: Yaroslav O. Halchenko <debian@onerussian.com>
 # 			made active on all ports from original iptables.conf
 #
+# $Revision$
 #
 
-[INCLUDES]
-
-before = iptables-common.conf
-
-
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = <iptables> -N f2b-<name>
-              <iptables> -A f2b-<name> -j <returntype>
-              <iptables> -I <chain> -p <protocol> -j f2b-<name>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I INPUT -p <protocol> -j fail2ban-<name>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = <iptables> -D <chain> -p <protocol> -j f2b-<name>
-             <actionflush>
-             <iptables> -X f2b-<name>
+actionstop = iptables -D INPUT -p <protocol> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -X fail2ban-<name>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = iptables -n -L INPUT | grep -q fail2ban-<name>
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j DROP
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = iptables -D fail2ban-<name> -s <ip> -j DROP
 
 [Init]
 
+# Defaut name of the chain
+#
+name = default
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+

config/action.d/iptables-common.conf

@@ -1,92 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Daniel Black
-#
-# This is a included configuration file and includes the definitions for the iptables
-# used in all iptables based actions by default.
-#
-# The user can override the defaults in iptables-common.local
-#
-# Modified: Alexander Koeppe <format_c@online.de>, Serg G. Brester <serg.brester@sebres.de>
-#       made config file IPv6 capable (see new section Init?family=inet6)
-
-[INCLUDES]
-
-after = iptables-blocktype.local
-        iptables-common.local
-# iptables-blocktype.local is obsolete
-
-[Definition]
-
-# Option:  actionflush
-# Notes.:  command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action)
-# Values:  CMD
-#
-actionflush = <iptables> -F f2b-<name>
-
-
-[Init]
-
-# Option:  chain
-# Notes    specifies the iptables chain to which the Fail2Ban rules should be
-#          added
-# Values:  STRING  Default: INPUT
-chain = INPUT
-
-# Default name of the chain
-#
-name = default
-
-# Option:  port
-# Notes.:  specifies port to monitor
-# Values:  [ NUM | STRING ]  Default:
-#
-port = ssh
-
-# Option:  protocol
-# Notes.:  internally used by config reader for interpolations.
-# Values:  [ tcp | udp | icmp | all ] Default: tcp
-#
-protocol = tcp
-
-# Option:  blocktype
-# Note:    This is what the action does with rules. This can be any jump target
-#          as per the iptables man page (section 8). Common values are DROP
-#          REJECT, REJECT --reject-with icmp-port-unreachable
-# Values:  STRING
-blocktype = REJECT --reject-with icmp-port-unreachable
-
-# Option:  returntype
-# Note:    This is the default rule on "actionstart". This should be RETURN
-#          in all (blocking) actions, except REJECT in allowing actions.
-# Values:  STRING
-returntype = RETURN
-
-# Option:  lockingopt
-# Notes.:  Option was introduced to iptables to prevent multiple instances from
-#          running concurrently and causing irratic behavior.  -w was introduced
-#          in iptables 1.4.20, so might be absent on older systems
-#          See https://github.com/fail2ban/fail2ban/issues/1122
-# Values:  STRING
-lockingopt = -w
-
-# Option:  iptables
-# Notes.:  Actual command to be executed, including common to all calls options
-# Values:  STRING
-iptables = iptables <lockingopt>
-
-
-[Init?family=inet6]
-
-# Option:  blocktype (ipv6)
-# Note:    This is what the action does with rules. This can be any jump target
-#          as per the iptables man page (section 8). Common values are DROP
-#          REJECT, REJECT --reject-with icmp6-port-unreachable
-# Values:  STRING
-blocktype = REJECT --reject-with icmp6-port-unreachable
-
-# Option:  iptables (ipv6)
-# Notes.:  Actual command to be executed, including common to all calls options
-# Values:  STRING
-iptables = ip6tables <lockingopt>
-

config/action.d/iptables-ipset-proto4.conf

@@ -1,65 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Daniel Black
-#
-# This is for ipset protocol 4 (ipset v4.2). If you have a later version
-# of ipset try to use the iptables-ipset-proto6.conf as it does some things
-# nicer.
-# 
-# This requires the program ipset which is normally in package called ipset.
-#
-# IPset was a feature introduced in the linux kernel 2.6.39 and 3.0.0 kernels.
-#
-# If you are running on an older kernel you make need to patch in external
-# modules. Debian squeeze can do this with:
-#   apt-get install xtables-addons-source 
-#   module-assistant auto-install xtables-addons
-#
-# Debian wheezy and above uses protocol 6
-
-[INCLUDES]
-
-before = iptables-common.conf
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart = ipset --create f2b-<name> iphash
-              <iptables> -I <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
-
-
-# Option:  actionflush
-# Notes.:  command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action)
-# Values:  CMD
-#
-actionflush = ipset --flush f2b-<name>
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop = <iptables> -D <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
-             <actionflush>
-             ipset --destroy f2b-<name>
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = ipset --test f2b-<name> <ip> ||  ipset --add f2b-<name> <ip>
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban = ipset --test f2b-<name> <ip> && ipset --del f2b-<name> <ip>
-
-[Init]
-

config/action.d/iptables-ipset-proto6-allports.conf

@@ -1,87 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Daniel Black
-#
-# This is for ipset protocol 6 (and hopefully later) (ipset v6.14).
-# Use ipset -V to see the protocol and version. Version 4 should use
-# iptables-ipset-proto4.conf.
-#
-# This requires the program ipset which is normally in package called ipset.
-#
-# IPset was a feature introduced in the linux kernel 2.6.39 and 3.0.0 kernels.
-#
-# If you are running on an older kernel you make need to patch in external
-# modules which probably won't be protocol version 6.
-#
-# Modified: Alexander Koeppe <format_c@online.de>, Serg G. Brester <serg.brester@sebres.de>
-#       made config file IPv6 capable (see new section Init?family=inet6)
-
-[INCLUDES]
-
-before = iptables-common.conf
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart = ipset create <ipmset> hash:ip timeout <default-ipsettime> <familyopt>
-              <iptables> -I <chain> -m set --match-set <ipmset> src -j <blocktype>
-
-# Option:  actionflush
-# Notes.:  command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action)
-# Values:  CMD
-#
-actionflush = ipset flush <ipmset>
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop = <iptables> -D <chain> -m set --match-set <ipmset> src -j <blocktype>
-             <actionflush>
-             ipset destroy <ipmset>
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = ipset add <ipmset> <ip> timeout <ipsettime> -exist
-
-# actionprolong = %(actionban)s
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban = ipset del <ipmset> <ip> -exist
-
-[Init]
-
-# Option: default-ipsettime
-# Notes:  specifies default timeout in seconds (handled default ipset timeout only)
-# Values:  [ NUM ]  Default: 0 (no timeout, managed by fail2ban by unban)
-default-ipsettime = 0
-
-# Option: ipsettime
-# Notes:  specifies ticket timeout (handled ipset timeout only)
-# Values:  [ NUM ]  Default: 0 (managed by fail2ban by unban)
-ipsettime = 0
-
-# expresion to caclulate timeout from bantime, example:
-# banaction = %(known/banaction)s[ipsettime='<timeout-bantime>']
-timeout-bantime = $([ "<bantime>" -le 2147483 ] && echo "<bantime>" || echo 0)
-
-ipmset = f2b-<name>
-familyopt =
-
-
-[Init?family=inet6]
-
-ipmset = f2b-<name>6
-familyopt = family inet6

config/action.d/iptables-ipset-proto6.conf

@@ -1,87 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Daniel Black
-#
-# This is for ipset protocol 6 (and hopefully later) (ipset v6.14).
-# Use ipset -V to see the protocol and version. Version 4 should use
-# iptables-ipset-proto4.conf.
-#
-# This requires the program ipset which is normally in package called ipset.
-#
-# IPset was a feature introduced in the linux kernel 2.6.39 and 3.0.0 kernels.
-#
-# If you are running on an older kernel you make need to patch in external
-# modules.
-#
-# Modified: Alexander Koeppe <format_c@online.de>, Serg G. Brester <serg.brester@sebres.de>
-#       made config file IPv6 capable (see new section Init?family=inet6)
-
-[INCLUDES]
-
-before = iptables-common.conf
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart = ipset create <ipmset> hash:ip timeout <default-ipsettime> <familyopt>
-              <iptables> -I <chain> -p <protocol> -m multiport --dports <port> -m set --match-set <ipmset> src -j <blocktype>
-
-# Option:  actionflush
-# Notes.:  command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action)
-# Values:  CMD
-#
-actionflush = ipset flush <ipmset>
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop = <iptables> -D <chain> -p <protocol> -m multiport --dports <port> -m set --match-set <ipmset> src -j <blocktype>
-             <actionflush>
-             ipset destroy <ipmset>
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = ipset add <ipmset> <ip> timeout <ipsettime> -exist
-
-# actionprolong = %(actionban)s
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban = ipset del <ipmset> <ip> -exist
-
-[Init]
-
-# Option: default-ipsettime
-# Notes:  specifies default timeout in seconds (handled default ipset timeout only)
-# Values:  [ NUM ]  Default: 0 (no timeout, managed by fail2ban by unban)
-default-ipsettime = 0
-
-# Option: ipsettime
-# Notes:  specifies ticket timeout (handled ipset timeout only)
-# Values:  [ NUM ]  Default: 0 (managed by fail2ban by unban)
-ipsettime = 0
-
-# expresion to caclulate timeout from bantime, example:
-# banaction = %(known/banaction)s[ipsettime='<timeout-bantime>']
-timeout-bantime = $([ "<bantime>" -le 2147483 ] && echo "<bantime>" || echo 0)
-
-ipmset = f2b-<name>
-familyopt =
-
-
-[Init?family=inet6]
-
-ipmset = f2b-<name>6
-familyopt = family inet6

config/action.d/iptables-multiport-log.conf

@@ -3,66 +3,76 @@
 # Author: Guido Bozzetto
 # Modified: Cyril Jaquier
 #
-# make "f2b-<name>" chain to match drop IP
-# make "f2b-<name>-log" chain to log and drop
-# insert a jump to f2b-<name> from -I <chain> if proto/port match
+# make "fail2ban-<name>" chain to match drop IP
+# make "fail2ban-<name>-log" chain to log and drop
+# insert a jump to fail2ban-<name> from -I INPUT if proto/port match
 #
+# $Revision$
 #
 
-[INCLUDES]
-
-before = iptables-common.conf
-
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = <iptables> -N f2b-<name>
-              <iptables> -A f2b-<name> -j <returntype>
-              <iptables> -I <chain> 1 -p <protocol> -m multiport --dports <port> -j f2b-<name>
-              <iptables> -N f2b-<name>-log
-              <iptables> -I f2b-<name>-log -j LOG --log-prefix "$(expr f2b-<name> : '\(.\{1,23\}\)'):DROP " --log-level warning -m limit --limit 6/m --limit-burst 2
-              <iptables> -A f2b-<name>-log -j <blocktype>
-
-# Option:  actionflush
-# Notes.:  command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action)
-# Values:  CMD
-#
-actionflush = <iptables> -F f2b-<name>
-              <iptables> -F f2b-<name>-log
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I INPUT 1 -p <protocol> -m multiport --dports <port> -j fail2ban-<name>
+              iptables -N fail2ban-<name>-log
+              iptables -I fail2ban-<name>-log -j LOG --log-prefix "$(expr fail2ban-<name> : '\(.\{1,23\}\)'):DROP " --log-level warning -m limit --limit 6/m --limit-burst 2
+              iptables -A fail2ban-<name>-log -j DROP
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = <iptables> -D <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
-             <actionflush>
-             <iptables> -X f2b-<name>
-             <iptables> -X f2b-<name>-log
+actionstop = iptables -D INPUT -p <protocol> -m multiport --dports <port> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -F fail2ban-<name>-log
+             iptables -X fail2ban-<name>
+             iptables -X fail2ban-<name>-log
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = <iptables> -n -L f2b-<name>-log >/dev/null
+actioncheck = iptables -n -L fail2ban-<name>-log >/dev/null
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = <iptables> -I f2b-<name> 1 -s <ip> -j f2b-<name>-log
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j fail2ban-<name>-log
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = <iptables> -D f2b-<name> -s <ip> -j f2b-<name>-log
+actionunban = iptables -D fail2ban-<name> -s <ip> -j fail2ban-<name>-log
 
 [Init]
 
+# Defaut name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp

config/action.d/iptables-multiport.conf

@@ -2,51 +2,68 @@
 #
 # Author: Cyril Jaquier
 # Modified by Yaroslav Halchenko for multiport banning
+# $Revision$
 #
 
-[INCLUDES]
-
-before = iptables-common.conf
-
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = <iptables> -N f2b-<name>
-              <iptables> -A f2b-<name> -j <returntype>
-              <iptables> -I <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I INPUT -p <protocol> -m multiport --dports <port> -j fail2ban-<name>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = <iptables> -D <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
-             <actionflush>
-             <iptables> -X f2b-<name>
+actionstop = iptables -D INPUT -p <protocol> -m multiport --dports <port> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -X fail2ban-<name>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = iptables -n -L INPUT | grep -q fail2ban-<name>
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j DROP
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = iptables -D fail2ban-<name> -s <ip> -j DROP
 
 [Init]
 
+# Defaut name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+

config/action.d/iptables-new.conf

@@ -2,53 +2,70 @@
 #
 # Author: Cyril Jaquier
 # Copied from iptables.conf and modified by Yaroslav Halchenko 
-#  to fulfill the needs of bugreporter dbts#350746.
+#  to fullfill the needs of bugreporter dbts#350746.
 #
+# $Revision$
 #
 
-[INCLUDES]
-
-before = iptables-common.conf
-
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = <iptables> -N f2b-<name>
-              <iptables> -A f2b-<name> -j <returntype>
-              <iptables> -I <chain> -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I INPUT -m state --state NEW -p <protocol> --dport <port> -j fail2ban-<name>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = <iptables> -D <chain> -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
-             <actionflush>
-             <iptables> -X f2b-<name>
+actionstop = iptables -D INPUT -m state --state NEW -p <protocol> --dport <port> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -X fail2ban-<name>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = iptables -n -L INPUT | grep -q fail2ban-<name>
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j DROP
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = iptables -D fail2ban-<name> -s <ip> -j DROP
 
 [Init]
 
+# Defaut name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+

config/action.d/iptables-xt_recent-echo.conf

@@ -1,79 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
-#
-# Modified: Alexander Koeppe <format_c@online.de>, Serg G. Brester <serg.brester@sebres.de>
-#       made config file IPv6 capable
-
-[INCLUDES]
-
-before = iptables-common.conf
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-# Changing iptables rules requires root privileges. If fail2ban is
-# configured to run as root, firewall setup can be performed by
-# fail2ban automatically. However, if fail2ban is configured to run as
-# a normal user, the configuration must be done by some other means
-# (e.g. using static firewall configuration with the
-# iptables-persistent package).
-# 
-# Explanation of the rule below:
-#    Check if any packets coming from an IP on the <iptname>
-#    list have been seen in the last 3600 seconds. If yes, update the
-#    timestamp for this IP and drop the packet. If not, let the packet
-#    through.
-#
-#    Fail2ban inserts blacklisted hosts into the <iptname> list
-#    and removes them from the list after some time, according to its
-#    own rules. The 3600 second timeout is independent and acts as a
-#    safeguard in case the fail2ban process dies unexpectedly. The
-#    shorter of the two timeouts actually matters.
-actionstart = if [ `id -u` -eq 0 ];then <iptables> -I <chain> -m recent --update --seconds 3600 --name <iptname> -j <blocktype>;fi
-
-# Option:  actionflush
-#
-# [TODO] Flushing is currently not implemented for xt_recent
-#
-actionflush = 
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop = echo / > /proc/net/xt_recent/<iptname>
-             if [ `id -u` -eq 0 ];then <iptables> -D <chain> -m recent --update --seconds 3600 --name <iptname> -j <blocktype>;fi
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck = test -e /proc/net/xt_recent/<iptname>
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = echo +<ip> > /proc/net/xt_recent/<iptname>
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban = echo -<ip> > /proc/net/xt_recent/<iptname>
-
-[Init]
-
-iptname              = f2b-<name>
-
-[Init?family=inet6]
-
-iptname = f2b-<name>6

config/action.d/iptables.conf

@@ -2,51 +2,68 @@
 #
 # Author: Cyril Jaquier
 #
+# $Revision$
 #
 
-[INCLUDES]
-
-before = iptables-common.conf
-
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = <iptables> -N f2b-<name>
-              <iptables> -A f2b-<name> -j <returntype>
-              <iptables> -I <chain> -p <protocol> --dport <port> -j f2b-<name>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I INPUT -p <protocol> --dport <port> -j fail2ban-<name>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = <iptables> -D <chain> -p <protocol> --dport <port> -j f2b-<name>
-             <actionflush>
-             <iptables> -X f2b-<name>
+actionstop = iptables -D INPUT -p <protocol> --dport <port> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -X fail2ban-<name>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = iptables -n -L INPUT | grep -q fail2ban-<name>
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j DROP
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = iptables -D fail2ban-<name> -s <ip> -j DROP
 
 [Init]
 
+# Defaut name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+

config/action.d/mail-buffered.conf

@@ -2,25 +2,23 @@
 #
 # Author: Cyril Jaquier
 #
+# $Revision$
 #
 
 [Definition]
 
-# bypass ban/unban for restored tickets
-norestored = 1
-
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart = printf %%b "Hi,\n
               The jail <name> has been started successfully.\n
               Output will be buffered until <lines> lines are available.\n
               Regards,\n
-              Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: started on <fq-hostname>" <dest>
+              Fail2Ban"|mail -s "[Fail2Ban] <name>: started" <dest>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = if [ -f <tmpfile> ]; then
@@ -28,13 +26,13 @@ actionstop = if [ -f <tmpfile> ]; then
                  These hosts have been banned by Fail2Ban.\n
                  `cat <tmpfile>`
                  Regards,\n
-                 Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: Summary from <fq-hostname>" <dest>
+                 Fail2Ban"|mail -s "[Fail2Ban] <name>: Summary" <dest>
                  rm <tmpfile>
              fi
              printf %%b "Hi,\n
              The jail <name> has been stopped.\n
              Regards,\n
-             Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: stopped on <fq-hostname>" <dest>
+             Fail2Ban"|mail -s "[Fail2Ban] <name>: stopped" <dest>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
@@ -45,7 +43,9 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionban = printf %%b "`date`: <ip> (<failures> failures)\n" >> <tmpfile>
@@ -55,14 +55,16 @@ actionban = printf %%b "`date`: <ip> (<failures> failures)\n" >> <tmpfile>
                 These hosts have been banned by Fail2Ban.\n
                 `cat <tmpfile>`
                 \nRegards,\n
-                Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: Summary" <dest>
+                Fail2Ban"|mail -s "[Fail2Ban] <name>: Summary" <dest>
                 rm <tmpfile>
             fi
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionunban = 
@@ -79,7 +81,7 @@ lines = 5
 
 # Default temporary file
 #
-tmpfile = /var/run/fail2ban/tmp-mail.txt
+tmpfile = /tmp/fail2ban-mail.txt
 
 # Destination/Addressee of the mail
 #

config/action.d/mail-whois-common.conf

@@ -1,28 +0,0 @@
-# Fail2Ban configuration file
-#
-# Common settings for mail actions
-#
-# Users can override the defaults in mail-whois-common.local
-
-[INCLUDES]
-
-# Load customizations if any available
-after = mail-whois-common.local
-
-[DEFAULT]
-#original character set of whois output will be sent to mail program
-_whois = whois <ip> || echo "missing whois program"
-
-# use heuristics to convert charset of whois output to a target
-# character set before sending it to a mail program
-# make sure you have 'file' and 'iconv' commands installed when opting for that
-_whois_target_charset = UTF-8
-_whois_convert_charset = (%(_whois)s) |
-                         { WHOIS_OUTPUT=$(cat) ; WHOIS_CHARSET=$(printf %%b "$WHOIS_OUTPUT" | file -b --mime-encoding -) ; printf %%b "$WHOIS_OUTPUT" | iconv -f $WHOIS_CHARSET -t %(_whois_target_charset)s//TRANSLIT - ; }
-
-# choose between _whois and _whois_convert_charset in mail-whois-common.local
-# or other *.local which include mail-whois-common.conf.
-_whois_command = %(_whois)s
-#_whois_command = %(_whois_convert_charset)s
-
-[Init]

config/action.d/mail-whois-lines.conf

@@ -2,35 +2,28 @@
 #
 # Author: Cyril Jaquier
 # Modified-By: Yaroslav Halchenko to include grepping on IP over log files
+# $Revision$
 #
 
-[INCLUDES]
-
-before = mail-whois-common.conf
-         helpers-common.conf
-
 [Definition]
 
-# bypass ban/unban for restored tickets
-norestored = 1
-
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart = printf %%b "Hi,\n
               The jail <name> has been started successfully.\n
               Regards,\n
-              Fail2Ban" | <mailcmd> "[Fail2Ban] <name>: started on <fq-hostname>" <dest>
+              Fail2Ban"|mail -s "[Fail2Ban] <name>: started" <dest>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = printf %%b "Hi,\n
              The jail <name> has been stopped.\n
              Regards,\n
-             Fail2Ban" | <mailcmd> "[Fail2Ban] <name>: stopped on <fq-hostname>" <dest>
+             Fail2Ban"|mail -s "[Fail2Ban] <name>: stopped" <dest>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
@@ -41,40 +34,35 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <failtime>  unix timestamp of the last failure
+#          <bantime>  unix timestamp of the ban time
 # Values:  CMD
 #
-
-_ban_mail_content = ( printf %%b "Hi,\n
+actionban = printf %%b "Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here is more information about <ip> :\n"
-            %(_whois_command)s;
-            printf %%b "\nLines containing failures of <ip> (max <grepmax>)\n";
-            %(_grep_logs)s;
-            printf %%b "\n
+            Here are more information about <ip>:\n
+            `whois <ip>`\n\n
+            Lines containing IP:<ip> in <logpath>\n
+            `grep '\<<ip>\>' <logpath>`\n\n
             Regards,\n
-            Fail2Ban" )
-
-actionban = %(_ban_mail_content)s | <mailcmd> "[Fail2Ban] <name>: banned <ip> from <fq-hostname>" <dest>
+            Fail2Ban"|mail -s "[Fail2Ban] <name>: banned <ip>" <dest>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <bantime>  unix timestamp of the ban time
+#          <unbantime>  unix timestamp of the unban time
 # Values:  CMD
 #
 actionunban = 
 
 [Init]
 
-# Option:  mailcmd
-# Notes.:  Your system mail command. Is passed 2 args: subject and recipient
-# Values:  CMD
-#
-mailcmd = mail -E 'set escape' -s
-
-# Default name of the chain
+# Defaut name of the chain
 #
 name = default
 
@@ -85,8 +73,3 @@ dest = root
 # Path to the log files which contain relevant lines for the abuser IP
 #
 logpath = /dev/null
-
-# Number of log lines to include in the email
-#
-#grepmax = 1000
-#grepopts = -m <grepmax>

config/action.d/mail-whois.conf

@@ -2,34 +2,28 @@
 #
 # Author: Cyril Jaquier
 #
+# $Revision$
 #
 
-[INCLUDES]
-
-before = mail-whois-common.conf
-
 [Definition]
 
-# bypass ban/unban for restored tickets
-norestored = 1
-
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart = printf %%b "Hi,\n
               The jail <name> has been started successfully.\n
               Regards,\n
-              Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: started on <fq-hostname>" <dest>
+              Fail2Ban"|mail -s "[Fail2Ban] <name>: started" <dest>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = printf %%b "Hi,\n
              The jail <name> has been stopped.\n
              Regards,\n
-             Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: stopped on <fq-hostname>" <dest>
+             Fail2Ban"|mail -s "[Fail2Ban] <name>: stopped" <dest>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
@@ -40,28 +34,32 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionban = printf %%b "Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here is more information about <ip> :\n
-            `%(_whois_command)s`\n
+            Here are more information about <ip>:\n
+            `whois <ip>`\n
             Regards,\n
-            Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: banned <ip> from <fq-hostname>" <dest>
+            Fail2Ban"|mail -s "[Fail2Ban] <name>: banned <ip>" <dest>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionunban = 
 
 [Init]
 
-# Default name of the chain
+# Defaut name of the chain
 #
 name = default
 

config/action.d/mail.conf

@@ -2,30 +2,28 @@
 #
 # Author: Cyril Jaquier
 #
+# $Revision$
 #
 
 [Definition]
 
-# bypass ban/unban for restored tickets
-norestored = 1
-
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart = printf %%b "Hi,\n
               The jail <name> has been started successfully.\n
               Regards,\n
-              Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: started  on <fq-hostname>" <dest>
+              Fail2Ban"|mail -s "[Fail2Ban] <name>: started" <dest>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = printf %%b "Hi,\n
              The jail <name> has been stopped.\n
              Regards,\n
-             Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: stopped on <fq-hostname>" <dest>
+             Fail2Ban"|mail -s "[Fail2Ban] <name>: stopped" <dest>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
@@ -36,26 +34,30 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionban = printf %%b "Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n
             Regards,\n
-            Fail2Ban"|mail -E 'set escape' -s "[Fail2Ban] <name>: banned <ip> from <fq-hostname>" <dest>
+            Fail2Ban"|mail -s "[Fail2Ban] <name>: banned <ip>" <dest>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionunban = 
 
 [Init]
 
-# Default name of the chain
+# Defaut name of the chain
 #
 name = default
 

config/action.d/mynetwatchman.conf

@@ -24,17 +24,18 @@
 # Another useful configuration value is <getcmd>, if you don't have wget
 # installed (an example config for curl is given below)
 #
+# $Revision$
 
 [Definition]
 
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
 actionstart =
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop =
@@ -48,7 +49,9 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 #
@@ -68,7 +71,9 @@ actionban = MNWLOGIN=`perl -e '$s=shift;$s=~s/([\W])/"%%".uc(sprintf("%%2.2x",or
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionunban =
@@ -97,13 +102,13 @@ mnwlogin =
 mnwpass =
 
 # Option:  myip
-# Notes.:  The target IP for the attack (your public IP). Should be overridden
+# Notes.:  TThe target IP for the attack (your public IP). Should be overridden
 #          either in the jail config or in a .local file unless your PUBLIC IP
 #          is the first IP assigned to eth0
 # Values:  [ an IP address ]  Default: Tries to find the IP address of eth0,
 #          which in most cases will be a private IP, and therefore incorrect
 #
-myip = `ip -4 addr show dev eth0 | grep inet | head -n 1 | sed -r 's/.*inet ([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}).*/\1/'`
+myip = `ip -4 addr show dev eth0 | grep inet | head -1 | sed -r 's/.*inet ([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}).*/\1/'`
 
 # Option:  protocol
 # Notes.:  The protocol over which the attack is happening
@@ -111,17 +116,13 @@ myip = `ip -4 addr show dev eth0 | grep inet | head -n 1 | sed -r 's/.*inet ([0-
 #
 protocol = tcp
 
-# Option:  agent
-# Default: Fail2ban
-agent = Fail2ban
-
 # Option:  getcmd
 # Notes.:  A command to fetch a URL. Should output page to STDOUT
 # Values:  CMD  Default: wget
 #
-getcmd = wget --no-verbose --tries=3 --waitretry=10 --connect-timeout=10 --read-timeout=60 --retry-connrefused --output-document=- --user-agent=<agent>
+getcmd = wget --no-verbose --tries=3 --waitretry=10 --connect-timeout=10 --read-timeout=60 --retry-connrefused --output-document=- --user-agent=Fail2Ban
 # Alternative value:
-# getcmd = curl --silent --show-error --retry 3 --connect-timeout 10 --max-time 60 --user-agent <agent>
+# getcmd = curl --silent --show-error --retry 3 --connect-timeout 10 --max-time 60 --user-agent Fail2Ban
 
 # Option:  srcport
 # Notes.:  The source port of the attack. You're unlikely to have this info, so
@@ -138,6 +139,6 @@ mnwurl = http://mynetwatchman.com/insertwebreport.asp
 
 # Option:  tmpfile
 # Notes.:  Base name of temporary files
-# Values:  [ STRING ]  Default: /var/run/fail2ban/tmp-mynetwatchman
+# Values:  [ STRING ]  Default: /tmp/fail2ban-mynetwatchman
 #
-tmpfile = /var/run/fail2ban/tmp-mynetwatchman
+tmpfile = /tmp/fail2ban-mynetwatchman

config/action.d/netscaler.conf

@@ -1,33 +0,0 @@
-# Fail2ban Citrix Netscaler Action
-# by Juliano Jeziorny
-# juliano@jeziorny.eu
-#
-# The script will add offender IPs to a dataset on netscaler, the dataset can then be used to block the IPs at a cs/vserver or global level
-# This dataset is then used to block IPs using responder policies on the netscaler.
-# 
-# The script assumes using HTTPS with unsecure certificate to access the netscaler, 
-# if you have a valid certificate installed remove the -k from the curl lines, or if you want http change it accordingly (and remove the -k)
-# 
-# This action depends on curl
-#
-# You need to populate the 3 options inside Init
-#
-# ns_host: IP or hostname of netslcaer appliance
-# ns_auth: username:password, suggest base64 encoded for a little added security (echo -n "username:password" | base64)
-# ns_dataset:  Name of the netscaler dataset holding the IPs to be blocked.
-# 
-# For further details on how to use it please check http://blog.ckzone.eu/2017/01/fail2ban-action-for-citrix-netscaler.html
-
-[Init]
-ns_host = 
-ns_auth = 
-ns_dataset = 
-
-[Definition]
-actionstart = curl -kH 'Authorization: Basic <ns_auth>' https://<ns_host>/nitro/v1/config
-
-actioncheck = 
-
-actionban = curl -k -H 'Authorization: Basic <ns_auth>' -X PUT -d '{"policydataset_value_binding":{"name":"<ns_dataset>","value":"<ip>"}}' https://<ns_host>/nitro/v1/config/
-
-actionunban = curl -H 'Authorization: Basic <ns_auth>' -X DELETE -k "https://<ns_host>/nitro/v1/config/policydataset_value_binding/<ns_dataset>?args=value:<ip>"

config/action.d/nftables-allports.conf

@@ -1,17 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-# Modified: Yaroslav O. Halchenko <debian@onerussian.com>
-# 			made active on all ports from original iptables.conf
-# Modified: Alexander Belykh <albel727@ngs.ru>
-#                       adapted for nftables
-#
-# Obsolete: superseded by nftables[type=allports]
-
-[INCLUDES]
-
-before = nftables.conf
-
-[Definition]
-
-type = allports

config/action.d/nftables-multiport.conf

@@ -1,17 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-# Modified: Yaroslav O. Halchenko <debian@onerussian.com>
-# 			made active on all ports from original iptables.conf
-# Modified: Alexander Belykh <albel727@ngs.ru>
-#                       adapted for nftables
-#
-# Obsolete: superseded by nftables[type=multiport]
-
-[INCLUDES]
-
-before = nftables.conf
-
-[Definition]
-
-type = multiport

config/action.d/nftables.conf

@@ -1,203 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Daniel Black
-# Author: Cyril Jaquier
-# Modified: Yaroslav O. Halchenko <debian@onerussian.com>
-# 			made active on all ports from original iptables.conf
-# Modified: Alexander Belykh <albel727@ngs.ru>
-#                       adapted for nftables
-#
-# This is a included configuration file and includes the definitions for the nftables
-# used in all nftables based actions by default.
-#
-# The user can override the defaults in nftables-common.local
-# Example: redirect flow to honeypot
-#
-# [Init]
-# table_family = ip
-# chain_type = nat
-# chain_hook = prerouting
-# chain_priority = -50
-# blocktype = counter redirect to 2222
-
-[INCLUDES]
-
-after = nftables-common.local
-
-[Definition]
-
-# Option:  type
-# Notes.:  type of the action.
-# Values:  [ multiport | allports ]  Default: multiport
-#
-type = multiport
-
-rule_match-custom =
-rule_match-allports = meta l4proto \{ <protocol> \}
-rule_match-multiport = $proto dport \{ $(echo '<port>' | sed s/:/-/g) \}
-match = <rule_match-<type>>
-
-# Option:  rule_stat
-# Notes.:  statement for nftables filter rule.
-#          leaving it empty will block all (include udp and icmp)
-# Values:  nftables statement
-#
-rule_stat = %(match)s <addr_family> saddr @<addr_set> <blocktype>
-
-# optional interator over protocol's:
-_nft_for_proto-custom-iter =
-_nft_for_proto-custom-done =
-_nft_for_proto-allports-iter =
-_nft_for_proto-allports-done =
-_nft_for_proto-multiport-iter = for proto in $(echo '<protocol>' | sed 's/,/ /g'); do
-_nft_for_proto-multiport-done = done
-
-_nft_list = <nftables> -a list chain <table_family> <table> <chain>
-_nft_get_handle_id = grep -oP '@<addr_set>\s+.*\s+\Khandle\s+(\d+)$'
-
-_nft_add_set = <nftables> add set <table_family> <table> <addr_set> \{ type <addr_type>\; \}
-              <_nft_for_proto-<type>-iter>
-              <nftables> add rule <table_family> <table> <chain> %(rule_stat)s
-              <_nft_for_proto-<type>-done>
-_nft_del_set = { %(_nft_list)s | %(_nft_get_handle_id)s; } | while read -r hdl; do
-               <nftables> delete rule <table_family> <table> <chain> $hdl; done
-              <nftables> delete set <table_family> <table> <addr_set>
-
-# Option:  _nft_shutdown_table
-# Notes.:  command executed after the stop in order to delete table (it checks that no sets are available):
-# Values:  CMD
-#
-_nft_shutdown_table = { <nftables> list table <table_family> <table> | grep -qP '^\s+set\s+'; } || {
-                        <nftables> delete table <table_family> <table>
-                      }
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart = <nftables> add table <table_family> <table>
-              <nftables> -- add chain <table_family> <table> <chain> \{ type <chain_type> hook <chain_hook> priority <chain_priority> \; \}
-              %(_nft_add_set)s
-
-# Option:  actionflush
-# Notes.:  command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action);
-#          uses `nft flush set ...` and as fallback (e. g. unsupported) recreates the set (with references)
-# Values:  CMD
-#
-actionflush = { <nftables> flush set <table_family> <table> <addr_set> 2> /dev/null; } || {
-              %(_nft_del_set)s
-              %(_nft_add_set)s
-              }
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop = %(_nft_del_set)s
-             <_nft_shutdown_table>
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck = <nftables> list chain <table_family> <table> <chain> | grep -q '@<addr_set>[ \t]'
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = <nftables> add element <table_family> <table> <addr_set> \{ <ip> \}
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban = <nftables> delete element <table_family> <table> <addr_set> \{ <ip> \}
-
-[Init]
-
-# Option:  table
-# Notes.:  main table to store chain and sets (automatically created on demand)
-# Values:  STRING  Default: f2b-table
-table = f2b-table
-
-# Option:  table_family
-# Notes.:  address family to work in
-# Values:  [ip | ip6 | inet]  Default: inet
-table_family = inet
-
-# Option:  chain
-# Notes.:  main chain to store rules
-# Values:  STRING  Default: f2b-chain
-chain = f2b-chain
-
-# Option:  chain_type
-# Notes.:  refers to the kind of chain to be created
-# Values:  [filter | route | nat]  Default: filter
-#
-chain_type = filter
-
-# Option:  chain_hook
-# Notes.:  refers to the kind of chain to be created
-# Values:  [ prerouting | input | forward | output | postrouting ]  Default: input
-#
-chain_hook = input
-
-# Option:  chain_priority
-# Notes.:  priority in the chain.
-# Values:  NUMBER  Default: -1
-#
-chain_priority = -1
-
-# Option:  addr_type
-# Notes.:  address type to work with
-# Values:  [ipv4_addr | ipv6_addr]  Default: ipv4_addr
-#
-addr_type = ipv4_addr
-
-# Default name of the filtering set
-#
-name = default
-
-# Option:  port
-# Notes.:  specifies port to monitor
-# Values:  [ NUM | STRING ]  Default:
-#
-port = ssh
-
-# Option:  protocol
-# Notes.:  internally used by config reader for interpolations.
-# Values:  [ tcp | udp ] Default: tcp
-#
-protocol = tcp
-
-# Option:  blocktype
-# Note:    This is what the action does with rules. This can be any jump target
-#          as per the nftables man page (section 8). Common values are drop,
-#          reject, reject with icmpx type host-unreachable, redirect to 2222
-# Values:  STRING
-blocktype = reject
-
-# Option:  nftables
-# Notes.:  Actual command to be executed, including common to all calls options
-# Values:  STRING
-nftables = nft
-
-# Option: addr_set
-# Notes.: The name of the nft set used to store banned addresses
-# Values: STRING
-addr_set = addr-set-<name>
-
-# Option: addr_family
-# Notes.: The family of the banned addresses
-# Values: [ ip | ip6 ]
-addr_family = ip
-
-[Init?family=inet6]
-addr_family = ip6
-addr_type = ipv6_addr
-addr_set = addr6-set-<name>

config/action.d/nginx-block-map.conf

@@ -1,117 +0,0 @@
-# Fail2Ban configuration file for black-listing via nginx
-#
-# Author: Serg G. Brester (aka sebres)
-#
-# To use 'nginx-block-map' action you should define some special blocks in your nginx configuration,
-# and use it hereafter in your locations (to notify fail2ban by failure, resp. nginx by ban).
-#
-# Example (argument "token_id" resp. cookie "session_id" used here as unique identifier for user):
-#
-#   http {
-#     ...
-#     # maps to check user is blacklisted (banned in f2b):
-#     #map $arg_token_id      $blck_lst_tok { include blacklisted-tokens.map; }
-#     map  $cookie_session_id $blck_lst_ses { include blacklisted-sessions.map; }
-#     ...
-#     # special log-format to notify fail2ban about failures:
-#     log_format f2b_session_errors '$msec failure "$cookie_session_id" - $remote_addr - $remote_user '
-#      ;#                  '"$request" $status $bytes_sent '
-#       #                  '"$http_referer" "$http_user_agent"';
-#
-#     # location checking blacklisted values:
-#     location ... {
-#       # check banned sessionid:
-#       if ($blck_lst_ses != "") {
-#         try_files "" @f2b-banned;
-#       }
-#       ...
-#       # notify fail2ban about a failure inside nginx:
-#       error_page 401 = @notify-f2b;
-#       ...
-#     }
-#     ...
-#     # location for return with "403 Forbidden" if banned:
-#     location @f2b-banned {
-#       default_type text/html;
-#       return 403 "<br/><center>
-#         <b style=\"color:red; font-size:18pt; border:2pt solid black; padding:5pt;\">
-#         You are banned!</b></center>";
-#     }
-#     ...
-#     # location to notify fail2ban about a failure inside nginx:
-#     location @notify-f2b {
-#       access_log /var/log/nginx/f2b-auth-errors.log f2b_session_errors;
-#     }
-#   }
-#   ...
-#
-# Note that quote-character (and possibly other special characters) are not allowed currently as session-id.
-# Thus please add any session-id validation rule in your locations (or in the corresponding backend-service), 
-# like in example below:
-#
-#   location ... {
-#     if ($cookie_session_id !~ "^[\w\-]+$") {
-#       return  403 "Wrong session-id"
-#     }
-#     ...
-#   }
-#
-# The parameters for jail corresponding log-format (f2b_session_errors):
-#
-#   [nginx-blck-lst]
-#   filter =
-#   datepattern = ^Epoch
-#   failregex = ^ failure "<F-ID>[^"]+</F-ID>" - <ADDR>
-#   usedns = no
-#
-# The same log-file can be used for IP-related jail (additionally to session-related, to ban very bad IPs):
-#
-#   [nginx-blck-ip]
-#   maxretry = 100
-#   filter =
-#   datepattern = ^Epoch
-#   failregex = ^ failure "[^"]+" - <ADDR>
-#   usedns = no
-#
-
-[Definition]
-
-# path to configuration of nginx (used to target nginx-instance in multi-instance system,
-# and as path for the blacklisted map):
-srv_cfg_path = /etc/nginx/
-
-# cmd-line arguments to supply to test/reload nginx:
-#srv_cmd = nginx -c %(srv_cfg_path)s/nginx.conf
-srv_cmd = nginx
-
-# pid file (used to check nginx is running):
-srv_pid = /run/nginx.pid
-
-# command used to check whether nginx is running and configuration is valid:
-srv_is_running = [ -f "%(srv_pid)s" ]
-srv_check_cmd = %(srv_is_running)s && %(srv_cmd)s -qt
-
-# first test nginx is running and configuration is correct, hereafter send reload signal:
-blck_lst_reload = %(srv_check_cmd)s; if [ $? -eq 0 ]; then
-                    %(srv_cmd)s -s reload; if [ $? -ne 0 ]; then echo 'reload failed.'; fi;
-                  fi;
-
-# map-file for nginx, can be redefined using `action = nginx-block-map[blck_lst_file="/path/file.map"]`:
-blck_lst_file = %(srv_cfg_path)s/blacklisted-sessions.map
-
-# Action definition:
-
-actionstart_on_demand = false
-actionstart = touch '%(blck_lst_file)s'
-
-actionflush = truncate -s 0 '%(blck_lst_file)s'; %(blck_lst_reload)s
-
-actionstop = %(actionflush)s
-
-actioncheck = 
-
-_echo_blck_row = printf '\%%s 1;\n' "<fid>"
-
-actionban = %(_echo_blck_row)s >> '%(blck_lst_file)s'; %(blck_lst_reload)s
-
-actionunban = id=$(%(_echo_blck_row)s | sed -e 's/[]\/$*.^|[]/\\&/g'); sed -i "/^$id$/d" %(blck_lst_file)s; %(blck_lst_reload)s

config/action.d/npf.conf

@@ -1,61 +0,0 @@
-# Fail2Ban configuration file
-#
-# NetBSD npf ban/unban
-#
-# Author: Nils Ratusznik <nils@NetBSD.org>
-# Based on pf.conf action file
-#
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-# we don't enable NPF automatically, as it will be enabled elsewhere
-actionstart = 
-
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-# we don't disable NPF automatically either
-actionstop = 
-
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck = 
-
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-#          <failures>  number of failures
-#          <time>  unix timestamp of the ban time
-# Values:  CMD
-#
-actionban = /sbin/npfctl table <tablename> add <ip>
-
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-#          <failures>  number of failures
-#          <time>  unix timestamp of the ban time
-# Values:  CMD
-#
-# note -r option used to remove matching rule
-actionunban = /sbin/npfctl table <tablename> rem <ip>
-
-[Init]
-# Option:  tablename
-# Notes.:  The pf table name.
-# Values:  [ STRING ]
-#
-tablename = fail2ban

config/action.d/nsupdate.conf

@@ -1,114 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Andrew St. Jean
-#
-# Use nsupdate to perform dynamic DNS updates on a BIND zone file.
-# One may want to do this to update a local RBL with banned IP addresses.
-#
-# Options
-#
-# domain	DNS domain that will appear in nsupdate add and delete
-#		commands.
-#
-# ttl		The time to live (TTL) in seconds of the TXT resource
-#		record.
-#
-# rdata		Data portion of the TXT resource record.
-#
-# nsupdatecmd	Full path to the nsupdate command.
-#
-# keyfile	Full path to TSIG key file used for authentication between
-#		nsupdate and BIND.
-#
-# Create an nsupdate.local to set at least the <domain> and <keyfile>
-# options as they don't have default values.
-#
-# The ban and unban commands assume nsupdate will authenticate to the BIND
-# server using a TSIG key. The full path to the key file must be specified
-# in the <keyfile> parameter. Use this command to generate your TSIG key.
-#
-# dnssec-keygen -a HMAC-MD5 -b 256 -n HOST <key_name>
-#
-# Replace <key_name> with some meaningful name.
-#
-# This command will generate two files. Specify the .private file in the
-# <keyfile> option. Note that the .key file must also be present in the same
-# directory for nsupdate to use the key.
-#
-# Don't forget to add the key and appropriate allow-update or update-policy
-# option to your named.conf file.
-#
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart =
-
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop =
-
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck =
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = echo <ip> | awk -F. '{print "prereq nxrrset "$4"."$3"."$2"."$1".<domain> TXT"; print "update add "$4"."$3"."$2"."$1".<domain> <ttl> IN TXT \"<rdata>\""; print "send"}' | <nsupdatecmd> -k <keyfile>
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban = echo <ip> | awk -F. '{print "update delete "$4"."$3"."$2"."$1".<domain>"; print "send"}' | <nsupdatecmd> -k <keyfile>
-
-[Init]
-
-# Option:  domain
-# Notes.:  DNS domain that nsupdate will update.
-# Values:  STRING
-#
-domain = 
-
-# Option:  ttl
-# Notes.:  time to live (TTL) in seconds of TXT resource record
-#          added by nsupdate.
-# Values:  NUM
-#
-ttl = 60
-
-# Option:  rdata
-# Notes.:  data portion of the TXT resource record added by nsupdate.
-# Values:  STRING
-#
-rdata = Your IP has been banned
-
-# Option:  nsupdatecmd
-# Notes.:  specifies the full path to the nsupdate program that dynamically
-#          updates BIND zone files.
-# Values:  CMD
-#
-nsupdatecmd = /usr/bin/nsupdate
-
-# Option:  keyfile
-# Notes.:  specifies the full path to the file containing the
-#	   TSIG key for communicating with BIND.
-# Values:  STRING
-#
-keyfile = 
-

config/action.d/osx-afctl.conf

@@ -1,16 +0,0 @@
-# Fail2Ban configuration file for using afctl on Mac OS X Server 10.5
-#
-# Anonymous author
-# http://www.fail2ban.org/wiki/index.php?title=HOWTO_Mac_OS_X_Server_(10.5)&diff=prev&oldid=4081
-#
-# Ref: https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/man8/afctl.8.html
-
-[Definition]
-actionstart = 
-actionstop = 
-actioncheck = 
-actionban = /usr/libexec/afctl -a <ip> -t <bantime>
-actionunban = /usr/libexec/afctl -r <ip>
-
-actionprolong = %(actionunban)s && %(actionban)s
-

config/action.d/osx-ipfw.conf

@@ -1,87 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Nick Munger
-# Modified by: Andy Fragen and Daniel Black
-#
-# Mod for OS X, using random rulenum as OSX ipfw doesn't include tables
-#
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart = 
-
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop = 
-
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck = 
-
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-# Values:  CMD
-#
-actionban = ipfw add <rulenum> set <setnum> <blocktype> log <block> from <ip> to <dst> <port>
-
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-# Values:  CMD
-#
-actionunban = ipfw delete `ipfw -S list | grep -i 'set <setnum> <blocktype> log <block> from <ip> to <dst>' | awk '{print $1;}'`
-
-[Init]
-
-# Option:  port
-# Notes.:  specifies port to block. Can be blank however may require block="ip"
-# Values:  [ NUM | STRING ]
-#
-port = ssh
-
-# Option:  dst
-# Notes.:  the local IP address of the network interface
-# Values:  IP, any, me or anything support by ipfw as a dst
-#
-dst = me
-
-# Option: block
-# Notes:  This is how much to block.
-#         Can be "ip", "tcp", "udp" or various other options.
-# Values: STRING
-block = tcp
-
-# Option:  blocktype
-# Notes.:  How to block the traffic. Use a action from man 8 ipfw
-#          Common values: deny, unreach port, reset
-# Values:  STRING
-#
-blocktype = unreach port
-
-# Option:  set number
-# Notes.:  The ipset number this is added to.
-# Values:  0-31
-setnum = 10
-
-# Option:  number for ipfw rule
-# Notes:   This is meant to be automatically generated and not overwritten
-# Values:  Random value between 10000 and 12000
-rulenum="`echo $((RANDOM%%2000+10000))`"
-
-# Duplicate prevention mechanism
-#rulenum = "`a=$((RANDOM%%2000+10000)); while ipfw show | grep -q ^$a\ ; do a=$((RANDOM%%2000+10000)); done; echo $a`"

config/action.d/pf.conf

@@ -1,124 +0,0 @@
-# Fail2Ban configuration file
-#
-# OpenBSD pf ban/unban
-#
-# Author: Nick Hilliard <nick@foobar.org>
-# Modified by: Alexander Koeppe making PF work seamless and with IPv4 and IPv6
-#
-#
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-# we don't enable PF automatically; to enable run pfctl -e 
-# or add `pf_enable="YES"` to /etc/rc.conf (tested on FreeBSD)
-# also, these rulesets are loaded into (nested) anchors
-# to enable them, add as wildcard:
-#     anchor "f2b/*"
-# or using jail names:
-#     anchor f2b {
-#        anchor name1
-#        anchor name2
-#        ...
-#     }
-# to your main pf ruleset, where "namei" are the names of the jails
-# which invoke this action
-actionstart = echo "table <<tablename>-<name>> persist counters" | <pfctl> -f-
-              port="<port>"; if [ "$port" != "" ] && case "$port" in \{*) false;; esac; then port="{$port}"; fi
-              echo "<block> proto <protocol> from <<tablename>-<name>> to <actiontype>" | <pfctl> -f-
-
-# Option:  start_on_demand - to start action on demand
-# Example: `action=pf[actionstart_on_demand=true]`
-actionstart_on_demand = false
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-# we only disable PF rules we've installed prior
-actionstop = <pfctl> -sr 2>/dev/null | grep -v <tablename>-<name> | <pfctl> -f-
-             %(actionflush)s
-             <pfctl> -t <tablename>-<name> -T kill
-
-
-# Option:  actionflush
-# Notes.:  command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action)
-# Values:  CMD
-#
-actionflush = <pfctl> -t <tablename>-<name> -T flush
-
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck = <pfctl> -sr | grep -q <tablename>-<name>
-
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-#          <failures>  number of failures
-#          <time>  unix timestamp of the ban time
-# Values:  CMD
-#
-actionban = <pfctl> -t <tablename>-<name> -T add <ip>
-
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-#          <failures>  number of failures
-#          <time>  unix timestamp of the ban time
-# Values:  CMD
-#
-# note -r option used to remove matching rule
-actionunban = <pfctl> -t <tablename>-<name> -T delete <ip>
-
-# Option: pfctl
-#
-# Use anchor as jailname to manipulate affected rulesets only.
-# If more parameter expected it can be extended with `pf[pfctl="<known/pfctl> ..."]`
-# 
-pfctl = pfctl -a f2b/<name>
-
-[Init]
-# Option:  tablename
-# Notes.:  The pf table name.
-# Values:  [ STRING ]
-#
-tablename = f2b
-
-# Option: block
-#
-# The action you want pf to take.
-# Probably, you want "block quick", but adjust as needed.
-block = block quick
-
-# Option:  protocol
-# Notes.:  internally used by config reader for interpolations.
-# Values:  [ tcp | udp | icmp | ipv6-icmp ] Default: tcp
-#
-protocol = tcp
-
-# Option: actiontype
-# Notes.: defines additions to the blocking rule
-# Values: leave empty to block all attempts from the host
-# Default: Value of the multiport
-actiontype = <multiport>
-
-# Option: allports
-# Notes.: default addition to block all ports
-# Usage.: use in jail config: "banaction = pf[actiontype=<allports>]"
-allports = any
-
-# Option: multiport
-# Notes.: addition to block access only to specific ports
-# Usage.: use in jail config: "banaction = pf[actiontype=<multiport>]"
-multiport = any port $port
-

config/action.d/route.conf

@@ -1,29 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Michael Gebetsroither
-#
-# This is for blocking whole hosts through blackhole routes.
-#
-# PRO:
-#   - Works on all kernel versions and as no compatibility problems (back to debian lenny and WAY further).
-#   - It's FAST for very large numbers of blocked ips.
-#   - It's FAST because it Blocks traffic before it enters common iptables chains used for filtering.
-#   - It's per host, ideal as action against ssh password bruteforcing to block further attack attempts.
-#   - No additional software required beside iproute/iproute2
-#
-# CON:
-#   - Blocking is per IP and NOT per service, but ideal as action against ssh password bruteforcing hosts
-
-[Definition]
-actionban   = ip route add <blocktype> <ip>
-actionunban = ip route del <blocktype> <ip>
-actioncheck =
-actionstart =
-actionstop =
-
-[Init]
-
-# Option:  blocktype
-# Note:    Type can be blackhole, unreachable and prohibit. Unreachable and prohibit correspond to the ICMP reject messages.
-# Values:  STRING
-blocktype = unreachable

config/action.d/sendmail-buffered.conf

@@ -2,52 +2,46 @@
 #
 # Author: Cyril Jaquier
 #
+# $Revision$
 #
 
-[INCLUDES]
-
-before = sendmail-common.conf
-
 [Definition]
 
-# bypass ban/unban for restored tickets
-norestored = 1
-
 # Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on <fq-hostname>
-              From: <sendername> <<sender>>
+actionstart = printf %%b "Subject: [Fail2Ban] <name>: started
+              From: Fail2Ban <<sender>>
               To: <dest>\n
               Hi,\n
               The jail <name> has been started successfully.\n
               Output will be buffered until <lines> lines are available.\n
               Regards,\n
-              Fail2Ban" | <mailcmd>
+              Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
 
 # Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = if [ -f <tmpfile> ]; then
-                 printf %%b "Subject: [Fail2Ban] <name>: summary from <fq-hostname>
-                 From: <sendername> <<sender>>
+                 printf %%b "Subject: [Fail2Ban] <name>: summary
+                 From: Fail2Ban <<sender>>
                  To: <dest>\n
                  Hi,\n
                  These hosts have been banned by Fail2Ban.\n
                  `cat <tmpfile>`
                  Regards,\n
-                 Fail2Ban" | <mailcmd>
+                 Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
                  rm <tmpfile>
              fi
-             printf %%b "Subject: [Fail2Ban] <name>: stopped  on <fq-hostname>
+             printf %%b "Subject: [Fail2Ban] <name>: stopped
              From: Fail2Ban <<sender>>
              To: <dest>\n
              Hi,\n
              The jail <name> has been stopped.\n
              Regards,\n
-             Fail2Ban" | <mailcmd>
+             Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
@@ -58,42 +52,54 @@ actioncheck =
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionban = printf %%b "`date`: <ip> (<failures> failures)\n" >> <tmpfile>
             LINE=$( wc -l <tmpfile> | awk '{ print $1 }' )
             if [ $LINE -ge <lines> ]; then
-                printf %%b "Subject: [Fail2Ban] <name>: summary from <fq-hostname>
-                From: <sendername> <<sender>>
+                printf %%b "Subject: [Fail2Ban] <name>: summary
+                From: Fail2Ban <<sender>>
                 To: <dest>\n
                 Hi,\n
                 These hosts have been banned by Fail2Ban.\n
                 `cat <tmpfile>`
                 Regards,\n
-                Fail2Ban" | <mailcmd>
+                Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
                 rm <tmpfile>
             fi
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
 actionunban = 
 
 [Init]
 
-# Default name of the chain
+# Defaut name of the chain
 #
 name = default
 
+# Destination/Addressee of the mail
+#
+dest = root
+
+# Sender of the mail
+#
+sender = fail2ban
+
 # Default number of lines that are buffered
 #
 lines = 5
 
 # Default temporary file
 #
-tmpfile = /var/run/fail2ban/tmp-mail.txt
+tmpfile = /tmp/fail2ban-mail.txt
 

config/action.d/sendmail-common.conf

@@ -1,77 +0,0 @@
-# Fail2Ban configuration file
-#
-# Common settings for sendmail actions
-#
-# Users can override the defaults in sendmail-common.local
-
-[INCLUDES]
-
-after = sendmail-common.local
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
-# Values:  CMD
-#
-actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on <fq-hostname>
-              Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
-              From: <sendername> <<sender>>
-              To: <dest>\n
-              Hi,\n
-              The jail <name> has been started successfully.\n
-              Regards,\n
-              Fail2Ban" | <mailcmd>
-
-# Option:  actionstop
-# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
-# Values:  CMD
-#
-actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped on <fq-hostname>
-             Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
-             From: <sendername> <<sender>>
-             To: <dest>\n
-             Hi,\n
-             The jail <name> has been stopped.\n
-             Regards,\n
-             Fail2Ban" | <mailcmd>
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck =
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban =
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban =
-
-[Init]
-
-# Your system mail command
-#
-mailcmd = /usr/sbin/sendmail -f "<sender>" "<dest>"
-
-# Recipient mail address
-#
-dest = root
-
-# Sender mail address
-#
-sender = fail2ban
-
-# Sender display name
-#
-sendername = Fail2Ban

config/action.d/sendmail-geoip-lines.conf

@@ -1,59 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Viktor Szépe
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
-         helpers-common.conf
-
-[Definition]
-
-# bypass ban/unban for restored tickets
-norestored = 1
-
-# Option:  actionban
-# Notes.:  Command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-#          You need to install geoiplookup and the GeoLite or GeoIP databases.
-#          (geoip-bin and geoip-database in Debian)
-#          The host command comes from bind9-host package.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = ( printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from <fq-hostname>
-            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
-            From: <sendername> <<sender>>
-            To: <dest>\n
-            Hi,\n
-            The IP <ip> has just been banned by Fail2Ban after
-            <failures> attempts against <name>.\n\n
-            Here is more information about <ip> :\n
-            http://bgp.he.net/ip/<ip>
-            http://www.projecthoneypot.org/ip_<ip>
-            http://whois.domaintools.com/<ip>\n\n
-            Country:`geoiplookup -f /usr/share/GeoIP/GeoIP.dat "<ip>" | cut -d':' -f2-`
-            AS:`geoiplookup -f /usr/share/GeoIP/GeoIPASNum.dat "<ip>" | cut -d':' -f2-`
-            hostname: <ip-host>\n\n
-            Lines containing failures of <ip> (max <grepmax>)\n";
-            %(_grep_logs)s;
-            printf %%b "\n
-            Regards,\n
-            Fail2Ban" ) | <mailcmd>
-
-[Init]
-
-# Default name of the chain
-#
-name = default
-
-# Path to the log files which contain relevant lines for the abuser IP
-#
-logpath = /dev/null
-
-# Number of log lines to include in the email
-#
-#grepmax = 1000
-#grepopts = -m <grepmax>

config/action.d/sendmail-whois-ipjailmatches.conf

@@ -1,41 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
-         mail-whois-common.conf
-
-[Definition]
-
-# bypass ban/unban for restored tickets
-norestored = 1
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from <fq-hostname>
-            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
-            From: <sendername> <<sender>>
-            To: <dest>\n
-            Hi,\n
-            The IP <ip> has just been banned by Fail2Ban after
-            <failures> attempts against <name>.\n\n
-            Here is more information about <ip> :\n
-            `%(_whois_command)s`\n\n
-            Matches for <name> with <ipjailfailures> failures IP:<ip>\n
-            <ipjailmatches>\n\n
-            Regards,\n
-            Fail2Ban" | <mailcmd>
-
-[Init]
-
-# Default name of the chain
-#
-name = default

config/action.d/sendmail-whois-ipmatches.conf

@@ -1,41 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
-         mail-whois-common.conf
-
-[Definition]
-
-# bypass ban/unban for restored tickets
-norestored = 1
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from <fq-hostname>
-            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
-            From: <sendername> <<sender>>
-            To: <dest>\n
-            Hi,\n
-            The IP <ip> has just been banned by Fail2Ban after
-            <failures> attempts against <name>.\n\n
-            Here is more information about <ip> :\n
-            `%(_whois_command)s`\n\n
-            Matches with <ipfailures> failures IP:<ip>\n
-            <ipmatches>\n\n
-            Regards,\n
-            Fail2Ban" | <mailcmd>
-
-[Init]
-
-# Default name of the chain
-#
-name = default

config/action.d/sendmail-whois-lines.conf

@@ -2,51 +2,87 @@
 #
 # Author: Cyril Jaquier
 #
+# $Revision$
 #
 
-[INCLUDES]
-
-before = sendmail-common.conf
-         mail-whois-common.conf
-         helpers-common.conf
-
 [Definition]
 
-# bypass ban/unban for restored tickets
-norestored = 1
+# Option:  actionstart
+# Notes.:  command executed once at the start of Fail2Ban.
+# Values:  CMD
+#
+actionstart = printf %%b "Subject: [Fail2Ban] <name>: started
+              From: Fail2Ban <<sender>>
+              To: <dest>\n
+              Hi,\n
+              The jail <name> has been started successfully.\n
+              Regards,\n
+              Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actionstop
+# Notes.:  command executed once at the end of Fail2Ban
+# Values:  CMD
+#
+actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped
+             From: Fail2Ban <<sender>>
+             To: <dest>\n
+             Hi,\n
+             The jail <name> has been stopped.\n
+             Regards,\n
+             Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actioncheck
+# Notes.:  command executed once before each actionban command
+# Values:  CMD
+#
+actioncheck = 
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = ( printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from <fq-hostname>
-            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
-            From: <sendername> <<sender>>
+actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip>
+            From: Fail2Ban <<sender>>
             To: <dest>\n
             Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here is more information about <ip> :\n"
-            %(_whois_command)s;
-            printf %%b "\nLines containing failures of <ip> (max <grepmax>)\n";
-            %(_grep_logs)s;
-            printf %%b "\n
+            Here are more information about <ip>:\n
+            `/usr/bin/whois <ip>`\n\n
+            Lines containing IP:<ip> in <logpath>\n
+            `/bin/grep '\<<ip>\>' <logpath>`\n\n
             Regards,\n
-            Fail2Ban" ) | <mailcmd>
+            Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
+# Values:  CMD
+#
+actionunban = 
 
 [Init]
 
-# Default name of the chain
+# Defaut name of the chain
 #
 name = default
 
+# Destination/Addressee of the mail
+#
+dest = root
+
+# Sender of the mail
+#
+sender = fail2ban
+
 # Path to the log files which contain relevant lines for the abuser IP
 #
 logpath = /dev/null
 
-# Number of log lines to include in the email
-#
-#grepmax = 1000
-#grepopts = -m <grepmax>

config/action.d/sendmail-whois-matches.conf

@@ -1,41 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
-         mail-whois-common.conf
-
-[Definition]
-
-# bypass ban/unban for restored tickets
-norestored = 1
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from <fq-hostname>
-            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
-            From: <sendername> <<sender>>
-            To: <dest>\n
-            Hi,\n
-            The IP <ip> has just been banned by Fail2Ban after
-            <failures> attempts against <name>.\n\n
-            Here is more information about <ip> :\n
-            `%(_whois_command)s`\n\n
-            Matches:\n
-            <matches>\n\n
-            Regards,\n
-            Fail2Ban" | <mailcmd>
-
-[Init]
-
-# Default name of the chain
-#
-name = default