Version changes/man pages for the release

changelog and thanks for the preceding fix
Fix sieve filter to use correct option
2014-08-19 16:23:33 -04:00 · 2014-07-28 12:46:52 -04:00 · 2014-07-28 12:44:42 -04:00 · 2014-04-24 12:24:57 -04:00 · 2014-04-18 23:00:46 +01:00 · 2014-04-18 10:11:57 -04:00
350 changed files with 5605 additions and 16000 deletions
@@ -1,4 +1,3 @@
-.pc/*
 *~
 build
 dist
@@ -7,6 +6,3 @@ htmlcov
 .coverage
 *.orig
 *.rej
-*.bak
-__pycache__
-.vagrant/
@@ -4,19 +4,17 @@ language: python
 python:
  - "2.6"
  - "2.7"
-  - "3.2"
-  - "3.3"
-  - "3.4"
-  - "pypy"
+env:
+  - LOG_LEVEL=error
+  - LOG_LEVEL=heavydebug
 before_install:
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then sudo apt-get update -qq; fi
+  - sudo apt-get update -qq
 install:
  - pip install pyinotify
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then sudo apt-get install -qq python-gamin; cp /usr/share/pyshared/gamin.py /usr/lib/pyshared/python2.7/_gamin.so $VIRTUAL_ENV/lib/python2.7/site-packages/; fi
+  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then sudo apt-get install -qq python-gamin; fi
  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then cd ..; pip install -q coveralls; cd -; fi
 script:
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then coverage run --rcfile=.travis_coveragerc setup.py test; else python setup.py test; fi
+  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then export PYTHONPATH="$PYTHONPATH:/usr/share/pyshared:/usr/lib/pyshared/python2.7"; fi
+  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]] && [ $LOG_LEVEL == heavydebug ]; then coverage run --rcfile=.travis_coveragerc fail2ban-testcases -l $LOG_LEVEL; else python ./fail2ban-testcases -l $LOG_LEVEL; fi
 after_success:
-# Coverage config file must be .coveragerc for coveralls
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then cp -v .travis_coveragerc .coveragerc; fi
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then coveralls; fi
+  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]] && [ $LOG_LEVEL == heavydebug ]; then coveralls; fi
@@ -4,4 +4,3 @@ branch = True
 omit =
    /usr/*
    /home/travis/virtualenv/*
-    fail2ban/server/filtersystemd.py
@@ -1,181 +0,0 @@
-#!/usr/bin/perl
-##########################################################################
-# $Id: fail2ban 150 2013-06-18 22:19:38Z mtremaine $
-##########################################################################
-# $Log: fail2ban,v $
-# Revision 1.5  2008/08/18 16:07:46  mike
-# Patches from Paul Gear <paul at libertysys.com> -mgt
-#
-# Revision 1.4  2008/06/30 23:07:51  kirk
-# fixed copyright holders for files where I know who they should be
-#
-# Revision 1.3  2008/03/24 23:31:26  kirk
-# added copyright/license notice to each script
-#
-# Revision 1.2  2006/12/15 04:53:59  bjorn
-# Additional filtering, by Willi Mann.
-#
-# Revision 1.1  2006/05/30 19:04:26  bjorn
-# Added fail2ban service, written by Yaroslav Halchenko.
-#
-# Written by Yaroslav Halchenko <debian@onerussian.com> for fail2ban
-#
-##########################################################################
-
-########################################################
-## Copyright (c) 2008  Yaroslav Halchenko
-## Covered under the included MIT/X-Consortium License:
-##    http://www.opensource.org/licenses/mit-license.php
-## All modifications and contributions by other persons to
-## this script are assumed to have been donated to the
-## Logwatch project and thus assume the above copyright
-## and licensing terms.  If you want to make contributions
-## under your own copyright or a different license this
-## must be explicitly stated in the contribution an the
-## Logwatch project reserves the right to not accept such
-## contributions.  If you have made significant
-## contributions to this script and want to claim
-## copyright please contact logwatch-devel@lists.sourceforge.net.
-#########################################################
-
-use strict;
-use Logwatch ':all';
-
-my $Debug = $ENV{'LOGWATCH_DEBUG'} || 0;
-my $Detail = $ENV{'LOGWATCH_DETAIL_LEVEL'} || 0;
-my $IgnoreHost = $ENV{'sshd_ignore_host'} || "";
-my $DebugCounter = 0;
-my $ReInitializations = 0;
-my @IptablesErrors = ();
-my @ActionErrors = ();
-my $NotValidIP = 0;		# reported invalid IPs number
-my @OtherList = ();
-
-my %ServicesBans = ();
-
-if ( $Debug >= 5 ) {
-	print STDERR "\n\nDEBUG: Inside Fail2Ban Filter \n\n";
-	$DebugCounter = 1;
-}
-
-while (defined(my $ThisLine = <STDIN>)) {
-    if ( $Debug >= 5 ) {
-	print STDERR "DEBUG($DebugCounter): $ThisLine";
-	$DebugCounter++;
-    }
-    chomp($ThisLine);
-    if ( ($ThisLine =~ /..,... DEBUG: /) or
-	 ($ThisLine =~ /..,... \S*\s*: DEBUG /) or # syntax of 0.7.? fail2ban
-	 ($ThisLine =~ /..,... INFO: (Fail2Ban v.* is running|Exiting|Enabled sections:)/) or
-	 ($ThisLine =~ /INFO\s+Log rotation detected for/) or
-	 ($ThisLine =~ /INFO\s+Jail.+(?:stopped|started|uses poller)/) or
-	 ($ThisLine =~ /INFO\s+Changed logging target to/) or
-	 ($ThisLine =~ /INFO\s+Creating new jail/) or
-	 ($ThisLine =~ /..,... \S+\s*: INFO\s+(Set |Socket|Exiting|Gamin|Created|Added|Using)/) or # syntax of 0.7.? fail2ban
-	 ($ThisLine =~ /..,... WARNING: Verbose level is /) or
-	 ($ThisLine =~ /..,... WARNING: Restoring firewall rules/)
-       )
-    {
-	if ( $Debug >= 6 ) {
-	    print STDERR "DEBUG($DebugCounter): line ignored\n";
-	}
-    } elsif ( my ($Service,$Action,$Host) = ($ThisLine =~ m/WARNING:?\s\[?(.*?)[]:]?\s(Ban|Unban)[^\.]* (\S+)/)) {
-	if ( $Debug >= 6 ) {
-	    print STDERR "DEBUG($DebugCounter): Found $Action for $Service from $Host\n";
-	}
-	$ServicesBans{$Service}{$Host}{$Action}++;
-	$ServicesBans{$Service}{"(all)"}{$Action}++;
-    } elsif ( my ($Service,$Host,$NumFailures) = ($ThisLine =~ m/INFO: (\S+): (.+) has (\d+) login failure\(s\). Banned./)) {
-	if ($Debug >= 4) {
-	    print STDERR "DEBUG: Found host $Host trying to access $Service - failed $NumFailures times\n";
-	}
-	push @{$ServicesBans{$Service}{$Host}{'Failures'}}, $NumFailures;
-    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/ ERROR:\s(.*):\s(\S+)\salready in ban list/)) {
-   	 $ServicesBans{$Service}{$Host}{'AlreadyInTheList'}++;
-    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/WARNING\s*\[(.*)\]\s*(\S+)\s*already banned/)) {
-       $ServicesBans{$Service}{$Host}{'AlreadyInTheList'}++;
-    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/ WARNING:\s(.*):\sReBan (\S+)/)) {
-	    $ServicesBans{$Service}{$Host}{'ReBan'}++;
-    } elsif ($ThisLine =~ / ERROR:?\s*(Execution of command )?\'?iptables/) {
-	    push @IptablesErrors, "$ThisLine\n";
-    } elsif ($ThisLine =~ /ERROR.*returned \d+$/) {
-       push @ActionErrors, "$ThisLine\n";
-    } elsif (($ThisLine =~ /..,... WARNING: \#\S+ reinitialization of firewalls/) or
-	    ($ThisLine =~ / ERROR\s*Invariant check failed. Trying to restore a sane environment/)) {
-	    $ReInitializations++;
-    } elsif ($ThisLine =~ /..,... WARNING:  is not a valid IP address/) {
-	# just ignore - this will be fixed within fail2ban and is harmless warning
-    }
-    else
-    {
-	# Report any unmatched entries...
-	push @OtherList, "$ThisLine\n";
-    }
-}
-
-###########################################################
-
-
-if (keys %ServicesBans) {
-    printf("\nBanned services with Fail2Ban:				 Bans:Unbans\n");
-    foreach my $service (sort {$a cmp $b} keys %ServicesBans) {
-	printf("   %-55s [%3d:%-3d]\n", "$service:",
-	       $ServicesBans{$service}{'(all)'}{'Ban'},
-	       $ServicesBans{$service}{'(all)'}{'Unban'});
-	delete $ServicesBans{$service}{'(all)'};
-	my $totalSort = TotalCountOrder(%{$ServicesBans{$service}}, \&SortIP);
-	if ($Detail >= 5) {
-	    foreach my $ip (sort $totalSort keys %{$ServicesBans{$service}}) {
-		   my $name = LookupIP($ip);
-		   printf("      %-53s %3d:%-3d\n",
-		       $name,
-		       $ServicesBans{$service}{$ip}{'Ban'},
-		       $ServicesBans{$service}{$ip}{'Unban'});
-		   if (($Detail >= 10) and ($ServicesBans{$service}{$ip}{'Failures'}>0)) {
-		      print "	   Failed ";
-		      foreach my $fails (@{$ServicesBans{$service}{$ip}{'Failures'}}) {
-			      print " $fails";
-		      }
-		    print " times";
-		    printf("\n	   %d Duplicate Ban attempts", $ServicesBans{$service}{$ip}{'AlreadyInTheList'}) ;
-		    printf("\n	   %d ReBans due to rules reinitilizations", $ServicesBans{$service}{$ip}{'ReBan'}) ;
-		    print "\n";
-		   }
-	    }
-	   }
-    }
-}
-
-
-if ($Detail>0) {
-    if ($#IptablesErrors > 0) {
-	   printf("\n%d faulty iptables invocation(s)", $#IptablesErrors);
-	   if ($Detail > 5) {
-	    print ":\n";
-	    print @IptablesErrors ;
-	   }
-    }
-    if ($#ActionErrors > 0) {
-       printf("\n%d error(s) returned from actions", $#ActionErrors);
-       if ($Detail > 5) {
-           print ":\n";
-           print @ActionErrors ;
-       }
-    }
-    if ($ReInitializations > 0) {
-	   printf("\n%d fail2ban rules reinitialization(s)", $ReInitializations);
-    }
-    if ($#OtherList >= 0) {
-	   print "\n**Unmatched Entries**\n";
-	   print @OtherList;
-    }
-}
-
-exit(0);
-
-# vi: shiftwidth=3 tabstop=3 syntax=perl et
-# Local Variables:
-# mode: perl
-# perl-indent-level: 3
-# indent-tabs-mode: nil
-# End:
@@ -1,17 +0,0 @@
-Guidelines on Fail2Ban contributions
-====================================
-
-### You found a severe security vulnerability in Fail2Ban?
-email details to fail2ban-vulnerabilities at lists dot sourceforge dot net .
-
-### You need some new features, you found bugs?
-visit [Issues](https://github.com/fail2ban/fail2ban/issues)
-and if your issue is not yet known -- file a bug report. See
-[Fail2Ban wiki](http://www.fail2ban.org/wiki/index.php/HOWTO_Seek_Help)
-on further instructions.
-
-### You would like to troubleshoot or discuss?
-join the [mailing list](https://lists.sourceforge.net/lists/listinfo/fail2ban-users)
-
-### You would like to contribute (new filters/actions/code/documentation)?
-send a [pull request](https://github.com/fail2ban/fail2ban/pulls)
@@ -4,166 +4,22 @@
                       |_| \__,_|_|_/___|_.__/\__,_|_||_|

 ================================================================================
-Fail2Ban (version 0.9.0.dev)                                          2014/xx/xx
+Fail2Ban (version 0.8.14)                                             2014/08/19
 ================================================================================

-ver. 0.9.1 (2014/xx/xx) - better, faster, stronger
----------
-
- Refactoring (IMPORTANT -- Please review your setup and configuration):
-   * iptables-common.conf replaced iptables-blocktype.conf
-     (iptables-blocktype.local should still be read) and now also
-     provides defaults for the chain, port, protocol and name tags
+ver. 0.8.14 (2014/08/19) - take-care-of-the-elderly
+-----------

 - Fixes:
-   * UTF-8 fixes in pure-ftp thanks to Johannes Weberhofer. Closes gh-806.
-   * systemd backend error on bad utf-8 in python3
-   * badips.py action error when logging HTTP error raised with badips request
-   * fail2ban-regex failed to work in python3 due to space/tab mix
-   * recidive regex samples incorrect log level
-   * journalmatch for recidive incorrect PRIORITY
-   * loglevel couldn't be changed in fail2ban.conf
-   * Handle case when no sqlite library is available for persistent database
-   * Only reban once per IP from database on fail2ban restart
-   * Nginx filter to support missing server_name. Closes gh-676
-   * fail2ban-regex assertion error caused by miscount missed lines with
-     multiline regex
-   * Fix actions failing to execute for Python 3.4.0. Workaround for
-     http://bugs.python.org/issue21207
-   * Database now returns persistent bans on restart (bantime < 0)
-   * Recursive action tags now fully processed. Fixes issue with bsd-ipfw
-     action
-   * Fixed TypeError with "ipfailures" and "ipjailfailures" action tags.
-     Thanks Serg G. Brester
-   * Correct times for non-timezone date times formats during DST
-   * Pass a copy of, not original, aInfo into actions to avoid side-effects
-   * Per-distribution paths to the exim's main log
-   * Ignored IPs are no longer banned when being restored from persistent
-     database
-   * Manually unbanned IPs are now removed from persistent database, such they
-     wont be banned again when Fail2Ban is restarted
-   * Pass "bantime" parameter to the actions in default jail's action
-     definition(s)
-   * filters.d/sieve.conf - fixed typo in _daemon.  Thanks Jisoo Park
-   * cyrus-imap -- also catch also failed logins via secured (imaps/pop3s).
-     Regression was introduced while strengthening failregex in 0.8.11 (bd175f)
-     Debian bug #755173
-   * postfix-sasl -- added journalmatch.  Thanks Luc Maisonobe
+  - minor fixes for claimed Python 2.4 and 2.5 compatibility
+  - Handle case when inotify watch is auto deleted on file deletion to stop
+    error messages
+  - tests - fixed few "leaky" file descriptors when files were not closed while
+    being removed physically
+  - grep in mail*-whois-lines.conf now also matches end of line to work
+    with the recidive filter
+  - filters.d/sieve.conf - fixed typo in _daemon.  Thanks Jisoo Park

- New features:
-   - New filters:
-     - monit  Thanks Jason H Martin
-     - directadmin  Thanks niorg
-   - New actions:
-     - symbiosis-blacklist-allports  for Bytemark symbiosis firewall
-   - fail2ban-client can fetch the running server version
-   - Added Cloudflare API action
-
- Enhancements
-   * Fail2ban-regex - add print-all-matched option. Closes gh-652
-   * Suppress fail2ban-client warnings for non-critical config options
-   * Match non "Bye Bye" disconnect messages for sshd locked account regex
-   * courier-smtp filter:
-     - match lines with user names
-     - match lines containing "535 Authentication failed" attempts
-   * Add <chain> tag to iptables-ipsets
-   * Realign fail2ban log output with white space to improve readability. Does
-     not affect SYSLOG output
-   * Log unhandled exceptions
-   * cyrus-imap: catch "user not found" attempts
-
-ver. 0.9.0 (2014/03/14) - beta
----------
-
-Carries all fixes, features and enhancements from 0.8.13 (unreleased) with
-major changes.
-
-The minimum supported python version is now 2.6. If you have python-2.4 or 2.5
-you can use the 0.8.12 version of fail2ban.
-
-Please take note of release notes:
-https://github.com/fail2ban/fail2ban/releases/tag/0.9.0
-
-Please test your configuration before relying on it.
-
-Nearly all development is thanks to Steven Hiscocks (THANKS!), merging,
-testcases and timezone support from Daniel Black, and code-review and minor
-additions from Yaroslav Halchenko.
-
- Refactoring (IMPORTANT -- Please review your setup and configuration):
-   * [..bddbf1e] jail.conf was heavily refactored and now is similar
-     to how it looked on Debian systems:
-     - default action could be configured once for all jails
-     - jails definitions only provide customizations (port, logpath)
-     - no need to specify 'filter' if name matches jail name
-   * [..5aef036] Core functionality moved into fail2ban/ module.
-     Closes gh-26
-     - tests included in module to aid testing and debugging
-   * Added fail2ban persistent database
-     - default location at /var/lib/fail2ban/fail2ban.sqlite3
-     - allows active bans to be reinstated on restart
-     - log files read from last position after restart
-   * Added systemd journal backend
-     - Dependency on python-systemd
-     - New "journalmatch" option added to filter configs files
-     - New "systemd-journal" option added to fail2ban-regex
-   * Added python3 support
-   * Support %z (Timezone offset) and %f (sub-seconds) support for
-     datedetector. Enhanced existing date/time have been updated patterns to
-     support these. ISO8601 now defaults to localtime unless specified otherwise.
-     Some filters have been change as required to capture these elements in the
-     right timezone correctly.
-   * Log levels are now set by Syslog style strings e.g. DEBUG, ERROR.
-     - Log level INFO is now more verbose
-   * Optionally can read log files starting from "head" or "tail".
-     - See "logpath" option in jail.conf(5) man page.
-   * Can now set log encoding for files per jail.
-     - Default uses systemd locale.
-
- New features:
-   * [..c7ae460] Multiline failregex. Close gh-54
-   * [8af32ed] Guacamole filter and support for Apache Tomcat date
-     format
-   * [..b6059f4] 'timeout' option for actions Close gh-60 and Debian bug
-     #410077.  Also it would now capture and include stdout and stderr
-     into logging messages in case of error or at DEBUG loglevel.
-   * Added action xarf-login-attack to report formatted attack messages
-     according to the XARF standard (v0.2). Close gh-105
-   * Support PyPy
-   * Add filter for apache-botsearch
-   * Add filter for kerio. Thanks Tony Lawrence for blog of regexs and
-     providing samples. Close gh-120
-   * Filter for stunnel
-   * Filter for Counter Strike 1.6. Thanks to onorua for logs.
-     Close gh-347
-   * Filter for squirrelmail. Close gh-261
-   * Filter for tine20. Close gh-583
-   * Custom date formats (strptime) can now be set in filters and jail.conf
-   * Python based actions can now be created.
-     - SMTP action for sending emails on jail start, stop and ban.
-   * Added action to use badips.com reporting and blacklist
-     - Requires Python 2.7+
-
- Enhancements
-   * Fail2ban-regex - don't accumulate lines if not printing them.
-     add options to suppress output of missed/ignored lines. Close gh-644
-   * Asterisk now supports syslog format
-   * Jail names increased to 26 characters and iptables prefix reduced
-     from fail2ban- to f2b- as suggested by buanzo in gh-462.
-   * Multiline filter for sendmail-spam. Close gh-418
-   * Multiline regex for Disconnecting: Too many authentication failures for
-     root [preauth]\nConnection closed by 6X.XXX.XXX.XXX [preauth]
-   * Multiline regex for Disconnecting: Connection from 61.XX.XX.XX port
-     51353\nToo many authentication failures for root [preauth]. Thanks
-     Helmut Grohne. Close gh-457
-   * Replacing use of deprecated API (.warning, .assertEqual, etc)
-   * [..a648cc2] Filters can have options now too which are substituted into
-     failregex / ignoreregex
-   * [..e019ab7] Multiple instances of the same action are allowed in the
-     same jail -- use actname option to disambiguate.
-   * Add honeypot email address to exim-spam filter as argument
-   * Properties and methods of actions accessible from fail2ban-client
-     - Use of properties replaces command actions "cinfo" interface

 ver. 0.8.13 (2014/03/15) - maintenance-only-from-now-on
 -----------
@@ -185,7 +41,7 @@ ver. 0.8.13 (2014/03/15) - maintenance-only-from-now-on
    Thanks Noel Butler.

 ver. 0.8.12 (2014/01/22) - things-can-only-get-better
----------
+-----------

 - IMPORTANT incompatible changes:
  - Rename firewall-cmd-direct-new to firewallcmd-new to fit within jail name
@@ -197,7 +53,7 @@ ver. 0.8.12 (2014/01/22) - things-can-only-get-better
  - allow for ",milliseconds" in the custom date format of proftpd.log
  - allow for ", referer ..." in apache-* filter for apache error logs.
  - allow for spaces at the beginning of kernel messages. Closes gh-448
-  - recidive jail to block all protocols. Closes gh-440. Thanks Ioan Indreias
+  - recidive jail to block all protocols. Closes gh-440. Thanksg Ioan Indreias
  - smtps not a IANA standard and has been removed from Arch. Replaced with
    465. Thanks Stefan. Closes gh-447
  - add 'flushlogs' command to allow logrotation without clobbering logtarget
@@ -210,7 +66,7 @@ ver. 0.8.12 (2014/01/22) - things-can-only-get-better
  - Asynchat changed to use push method which verifys whether all data was
    send. This ensures that all data is sent before closing the connection.
  - Removed unnecessary reference to as yet undeclared $jail_name when checking
-    a specific jail in nagios script.
+    a specific jail.
  - Filter dovecot reordered session and TLS items in regex with wider scope
    for session characters. Thanks Ivo Truxa. Closes gh-586
  - A single bad failregex or command syntax in configuration files won't stop
@@ -226,11 +82,8 @@ ver. 0.8.12 (2014/01/22) - things-can-only-get-better
    Thanks dani. Closes gh-503
  - exim-spam filter to match spamassassin log entry for option SAdevnull.
    Thanks Ivo Truxa. Closes gh-533
-  - filter.d/nsd.conf -- also amended Unix date template to match nsd format
  - Added to sshd filter expression for "Received disconnect from <HOST>: 3:
    ...: Auth fail". Thanks Marcel Dopita. Closes gh-289
-  - loglines now also report "[PID]" after the name portion
-  - Added filter.d/ejabberd-auth
  - Improved ACL-handling for Asterisk
  - loglines now also report "[PID]" after the name portion
  - Added improper command pipelining to postfix filter.
@@ -240,12 +93,10 @@ ver. 0.8.12 (2014/01/22) - things-can-only-get-better
  - filter.d/solid-pop3d -- added thanks to Jacques Lav!gnotte on mailinglist.
  - Add filter for apache-modsecurity.
  - filter.d/nsd.conf -- also amended Unix date template to match nsd format
-  - Added openwebmail filter thanks Ivo Truxa. Closes gh-543
+  - Added filter.d/openwebmail filter thanks Ivo Truxa. Closes gh-543
+  - Added filter.d/horde.
  - Added filter for freeswitch. Thanks Jim and editors and authors of 
-    http://wiki.freeswitch.org/wiki/Fail2ban
-  - Added groupoffice filter thanks to logs from Merijn Schering.
-    Closes gh-566
-  - Added filter for horde
+    http://wiki.freeswitch.org/wiki/Fail2ban.
  - Added filter for squid. Thanks Roman Gelfand.
  - Added filter for ejabberd-auth.
  - Added filter.d/openwebmail filter thanks Ivo Truxa. Closes gh-543
@@ -258,7 +109,7 @@ ver. 0.8.12 (2014/01/22) - things-can-only-get-better


 ver. 0.8.11 (2013/11/13) - loves-unittests-and-tight-DoS-free-filter-regexes
----------
+-----------

 In light of CVE-2013-2178 that triggered our last release we have put
 a significant effort into tightening all of the regexs of our filters
@@ -317,15 +168,15 @@ and bug requests.
  Daniel Black & Sebastian Arcus
   * filter.d/asterisk -- more regexes
  Daniel Black
-   * action.d/hostsdeny -- NOTE: new dependency 'ed'. Switched to use 'ed' across
+   * action.d/hostsdeny -- NOTE: new dependancy 'ed'. Switched to use 'ed' across
     all platforms to ensure permissions are the same before and after a ban.
     Closes gh-266. hostsdeny supports daemon_list now too.
-   * action.d/bsd-ipfw - action option unused. Change blocktype to port unreach
+   * action.d/bsd-ipfw - action option unsed. Change blocktype to port unreach
     instead of deny for consistancy.
   * filter.d/dovecot - added to support different dovecot failure
     "..disallowed plaintext auth". Closes Debian bug #709324
   * filter.d/roundcube-auth - timezone offset can be positive or negative
-   * action.d/bsd-ipfw - action option unused. Fixed to blocktype for
+   * action.d/bsd-ipfw - action option unsed. Fixed to blocktype for
     consistency. default to port unreach instead of deny
   * filter.d/dropbear - fix regexs to match standard dropbear and the patched
     http://www.unchartedbackwaters.co.uk/files/dropbear/dropbear-0.52.patch
@@ -1,4 +1,4 @@
-..                       __      _ _ ___ _
+                         __      _ _ ___ _
                        / _|__ _(_) |_  ) |__  __ _ _ _
                       |  _/ _` | | |/ /| '_ \/ _` | ' \
                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
@@ -25,7 +25,6 @@ Pull Requests
 =============

 When submitting pull requests on GitHub we ask you to:
-
 * Clearly describe the problem you're solving;
 * Don't introduce regressions that will make it hard for systems administrators
  to update;
@@ -40,9 +39,9 @@ If you are developing filters see the FILTERS file for documentation.
 Code Testing
 ============

-Existing tests can be run by executing `bin/fail2ban-testcases`. It has
-options like --log-level that will probably be useful.  Run
-`bin/fail2ban-testcases --help` for the full list of options.
+Existing tests can be run by executing `fail2ban-testcases`. This has options
+like --log-level that will probably be useful. `fail2ban-testcases --help` for
+full options.

 Test cases should cover all usual cases, all exception cases and all inside
 / outside boundary conditions.
@@ -53,32 +52,32 @@ for more details.

 Install the package python-coverage to visualise your test coverage. Run the
 following (note: on Debian-based systems, the script is called
-`python-coverage`)::
+`python-coverage`):

-  coverage run bin/fail2ban-testcases
-  coverage html
+coverage run fail2ban-testcases
+coverage html

 Then look at htmlcov/index.html and see how much coverage your test cases
 exert over the code base. Full coverage is a good thing however it may not be
 complete. Try to ensure tests cover as many independent paths through the
 code.

-Manual Execution. To run in a development environment do::
+Manual Execution. To run in a development environment do:

-  ./fail2ban-client -c config/ -s /tmp/f2b.sock -i start
+./fail2ban-client -c config/ -s /tmp/f2b.sock -i start

-some quick commands::
+some quick commands:

-  status
-  add test pyinotify
-  status test
-  set test addaction iptables
-  set test actionban iptables echo <ip> <cidr> >> /tmp/ban
-  set test actionunban iptables echo <ip> <cidr> >> /tmp/unban
-  get test actionban iptables
-  get test actionunban iptables
-  set test banip 192.168.2.2
-  status test
+status
+add test pyinotify
+status test
+set test addaction iptables
+set test actionban iptables echo <ip> <cidr> >> /tmp/ban
+set test actionunban iptables echo <ip> <cidr> >> /tmp/unban
+get test actionban iptables
+get test actionunban iptables
+set test banip 192.168.2.2
+status test



@@ -105,15 +104,6 @@ older versions on python. For all other uses of "pragma: no cover" or
 "pragma: no branch" document the reason why its not covered. "I haven't written
 a test case" isn't a sufficient reason.

-pyflakes
--------
-
-pyflakes can be used to find unused imports, and unused, undefined and
-redefined variables. pyflakes should be run in any python code, including
-python based actions::
-
-  pyflakes bin/ config/ fail2ban/
-
 Documentation
 -------------

@@ -131,10 +121,10 @@ Git

 Use the following tags in your commit messages:

-* 'BF:' for bug fixes
-* 'DOC:' for documentation fixes
-* 'ENH:' for enhancements
-* 'TST:' for commits concerning tests only (thus not touching the main code-base)
+'BF:' for bug fixes
+'DOC:' for documentation fixes
+'ENH:' for enhancements
+'TST:' for commits concerning tests only (thus not touching the main code-base)

 Multiple tags could be joined with +, e.g. "BF+TST:".

@@ -278,3 +268,158 @@ action.py

 Takes care about executing start/check/ban/unban/stop commands

+
+Releasing
+=========
+
+# Check distribution patches and see if they can be included
+
+  * https://apps.fedoraproject.org/packages/fail2ban/sources
+  * http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-analyzer/fail2ban/
+  * http://svnweb.freebsd.org/ports/head/security/py-fail2ban/
+  * https://build.opensuse.org/package/show?package=fail2ban&project=openSUSE%3AFactory
+  * http://sophie.zarb.org/sources/fail2ban (Mageia)
+  * https://trac.macports.org/browser/trunk/dports/security/fail2ban
+
+# Check distribution outstanding bugs
+
+  * https://github.com/fail2ban/fail2ban/issues?sort=updated&state=open
+  * http://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=fail2ban
+  * https://bugs.launchpad.net/ubuntu/+source/fail2ban
+  * http://bugs.sabayon.org/buglist.cgi?quicksearch=net-analyzer%2Ffail2ban
+  * https://bugs.archlinux.org/?project=5&cat%5B%5D=33&string=fail2ban
+  * https://bugs.gentoo.org/buglist.cgi?query_format=advanced&short_desc=fail2ban&bug_status=UNCONFIRMED&bug_status=CONFIRMED&bug_status=IN_PROGRESS&short_desc_type=allwords
+  * https://bugzilla.redhat.com/buglist.cgi?query_format=advanced&bug_status=NEW&bug_status=ASSIGNED&component=fail2ban&classification=Red%20Hat&classification=Fedora
+  * http://www.freebsd.org/cgi/query-pr-summary.cgi?text=fail2ban
+  * https://bugs.mageia.org/buglist.cgi?quicksearch=fail2ban
+  * https://build.opensuse.org/package/requests/openSUSE:Factory/fail2ban
+
+# Make sure the tests pass
+
+  ./fail2ban-testcases-all
+
+# Ensure the version is correct
+
+  in:
+  * ./common/version.py
+  * top of ChangeLog
+  * README.md
+
+# Ensure the MANIFEST is complete
+
+Run:
+
+  python setup.py sdist
+
+Look for errors like:
+ 'testcases/files/logs/mysqld.log' not a regular file -- skipping
+
+Which indicates that testcases/files/logs/mysqld.log has been moved or is a directory
+
+  tar -C /tmp -jxf dist/fail2ban-0.8.14.tar.bz2
+
+# clean up current direcory
+
+  diff -rul --exclude \*.pyc . /tmp/fail2ban-0.8.14/
+
+  # Only differences should be files that you don't want distributed.
+
+# Ensure the tests work from the tarball
+
+  cd /tmp/fail2ban-0.8.14/ && ./fail2ban-testcases-all
+
+# Add/finalize the corresponding entry in the ChangeLog
+
+  To generate a list of committers use e.g.
+
+  git shortlog -sn 0.8.13.. | sed -e 's,^[ 0-9\t]*,,g' | tr '\n' '\|' | sed -e 's:|:, :g'
+
+  Ensure the top of the ChangeLog has the right version and current date.
+
+  Ensure the top entry of the ChangeLog has the right version and current date.
+
+# Update man pages
+
+  (cd man ; ./generate-man )
+  git commit -m 'DOC/ENH: update man pages for release' man/*
+
+# Prepare source and rpm binary distributions
+
+  python setup.py sdist
+  python setup.py bdist_rpm
+  python setup.py upload
+
+# Provide a release sample to distributors
+
+  * Arch Linux:
+            https://www.archlinux.org/packages/community/any/fail2ban/
+  * Debian: Yaroslav Halchenko <debian@onerussian.com>
+            http://packages.qa.debian.org/f/fail2ban.html
+  * FreeBSD: Christoph Theis theis@gmx.at>, Nick Hilliard <nick@foobar.org>
+            http://svnweb.freebsd.org/ports/head/security/py-fail2ban/Makefile?view=markup
+            http://www.freebsd.org/cgi/query-pr-summary.cgi?text=fail2ban
+  * Fedora: Axel Thimm <Axel.Thimm@atrpms.net>
+            https://apps.fedoraproject.org/packages/fail2ban
+            http://pkgs.fedoraproject.org/cgit/fail2ban.git
+            https://admin.fedoraproject.org/pkgdb/acls/bugs/fail2ban
+  * Gentoo: netmon@gentoo.org
+            http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-analyzer/fail2ban/metadata.xml?view=markup
+            https://bugs.gentoo.org/buglist.cgi?quicksearch=fail2ban
+  * openSUSE: Stephan Kulow <coolo@suse.com>
+            https://build.opensuse.org/package/show/openSUSE:Factory/fail2ban
+  * Mac Ports: @Malbrouck on github (gh-49)
+            https://trac.macports.org/browser/trunk/dports/security/fail2ban/Portfile
+  * Mageia:
+            https://bugs.mageia.org/buglist.cgi?quicksearch=fail2ban
+  An potentially to the fail2ban-users directory.
+
+# Wait for feedback from distributors
+
+# Prepare a release notice https://github.com/fail2ban/fail2ban/releases/new
+
+  Upload the source/binaries from the dist directory and tag the release using the URL
+
+# Upload source/binaries to sourceforge http://sourceforge.net/projects/fail2ban/
+
+# Run the following and update the wiki with output:
+  python -c 'import common.protocol; common.protocol.printWiki()'
+
+  page: http://www.fail2ban.org/wiki/index.php/Commands
+
+* Update:
+  http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_Versions&action=edit
+
+  http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_News&action=edit
+  move old bits to:
+  http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_OldNews&action=edit
+
+  http://www.fail2ban.org/wiki/index.php/ChangeLog
+  http://www.fail2ban.org/wiki/index.php/Requirements (Check requirement)
+  http://www.fail2ban.org/wiki/index.php/Features
+
+* See if any filters are upgraded:
+  http://www.fail2ban.org/wiki/index.php/Special:AllPages
+
+# Email users and development list of release
+
+# notify distributors
+
+Post Release
+============
+
+Add the following to the top of the ChangeLog
+
+ver. 0.8.15 (2014/XX/XXX) - wanna-be-released
+-----------
+
+- Fixes:
+
+- New Features:
+
+- Enhancements:
+
+Alter the git shortlog command in the previous section to refer to the just
+released version.
+
+and adjust common/version.py to carry .dev suffix to signal
+a version under development.
@@ -1,4 +1,4 @@
-..                       __      _ _ ___ _
+                         __      _ _ ___ _
                        / _|__ _(_) |_  ) |__  __ _ _ _
                       |  _/ _` | | |/ /| '_ \/ _` | ' \
                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
@@ -7,8 +7,10 @@
 Developing Filters
 ================================================================================

-Filters are tricky. They need to:
+Filters
+=======

+Filters are tricky. They need to:
 * work with a variety of the versions of the software that generates the logs;
 * work with the range of logging configuration options available in the
  software;
@@ -29,11 +31,10 @@ what you have done, what is the hurdle, and we'll attempt to help (PR
 will be automagically updated with future commits you would push to
 complete it).

-Filter Test Cases
-=================
+Filter test cases
+-----------------

-Purpose
-------
+Purpose:

 Start by finding the log messages that the application generates related to
 some form of authentication failure. If you are adding to an existing filter
@@ -48,8 +49,7 @@ and exim-spam at log messages related to spam.
 Even if it is a new filter you may consider separating the log messages into
 different filters based on purpose.

-Cause
-----
+Cause:

 Are some of the log lines a result of the same action? For example, is a PAM
 failure log message, followed by an application specific failure message the
@@ -65,8 +65,7 @@ the log message be occurring due to the first step towards the application
 asking for authentication? Could the log messages occur often? If some of
 these are true make a note of this in the jail.conf example that you provide.

-Samples
-------
+Samples:

 It is important to include log file samples so any future change in the regular
 expression will still work with the log lines you have identified.
@@ -94,22 +93,21 @@ If the mechanism to create the log message isn't obvious provide a
 configuration and/or sample scripts testcases/files/config/{filtername} and
 reference these in the comments above the log line.

-FailJSON metadata
-----------------
+FailJSON metadata:

 A failJSON metadata is a comment immediately above the log message. It will
-look like::
+look like:

-  # failJSON: { "time": "2013-06-10T10:10:59", "match": true , "host": "93.184.216.119" }
+# failJSON: { "time": "2013-06-10T10:10:59", "match": true , "host": "93.184.216.119" }

 Time should match the time of the log message. It is in a specific format of
 Year-Month-Day'T'Hour:minute:Second.  If your log message does not include a
 year, like the example below, the year should be listed as 2005, if before Sun
 Aug 14 10am UTC, and 2004 if afterwards.  Here is an example failJSON
-line preceding a sample log line::
+line preceding a sample log line:

-  # failJSON: { "time": "2005-03-24T15:25:51", "match": true , "host": "198.51.100.87" }
-  Mar 24 15:25:51 buffalo1 dropbear[4092]: bad password attempt for 'root' from 198.51.100.87:5543
+# failJSON: { "time": "2005-03-24T15:25:51", "match": true , "host": "198.51.100.87" }
+Mar 24 15:25:51 buffalo1 dropbear[4092]: bad password attempt for 'root' from 198.51.100.87:5543

 The "host" in failJSON should contain the IP or domain that should be blocked.

@@ -118,28 +116,27 @@ attacks) and any log lines to be excluded (see "Cause" section above), set
 "match": false in the failJSON and describe the reason in the comment above.

 After developing regexes, the following command will test all failJSON metadata
-against the log lines in all sample log files::
+against the log lines in all sample log files

-  ./fail2ban-testcases testSampleRegex
+./fail2ban-testcases testSampleRegex

 Developing Filter Regular Expressions
-=====================================
+-------------------------------------

-Date/Time
---------
+Date/Time:

 At the moment, Fail2Ban depends on log lines to have time stamps.  That is why
 before starting to develop failregex, check if your log line format known to
 Fail2Ban.  Copy the time component from the log line and append an IP address to
-test with following command::
+test with following command:

-  ./fail2ban-regex "2013-09-19 02:46:12 1.2.3.4" "<HOST>"
+./fail2ban-regex "2013-09-19 02:46:12 1.2.3.4" "<HOST>"

-Output of such command should contain something like::
+Output of such command should contain something like:

-  Date template hits:
-  |- [# of hits] date format
-  |  [1] Year-Month-Day Hour:Minute:Second
+Date template hits:
+|- [# of hits] date format
+|  [1] Year-Month-Day Hour:Minute:Second

 Ensure that the template description matches time/date elements in your log line
 time stamp.  If there is no matched format then date template needs to be added
@@ -147,31 +144,29 @@ to server/datedetector.py.  Ensure that a new template is added in the order
 that more specific matches occur first and that there is no confusion between a
 Day and a Month.

-Filter file
-----------
+Filter file:

 The filter is specified in a config/filter.d/{filtername}.conf file. Filter file
-can have sections INCLUDES (optional) and Definition as follows::
+can have sections INCLUDES (optional) and Definition as follows:

-  [INCLUDES]
-  
-  before = common.conf
-  
-  after = filtername.local
-  
-  [Definition]
-  
-  failregex = ....
-  
-  ignoreregex = ....
+[INCLUDES]
+
+before = common.conf
+
+after = filtername.local
+
+[Definition]
+
+failregex = ....
+
+ignoreregex = ....

 This is also documented in the man page jail.conf (section 5). Other definitions
 can be added to make failregex's more readable and maintainable to be used
 through string Interpolations (see http://docs.python.org/2.7/library/configparser.html)


-General rules
-------------
+General rules:

 Use "before" if you need to include a common set of rules, like syslog or if
 there is a common set of regexes for multiple filters.
@@ -183,35 +178,33 @@ Try to avoid using ignoreregex mainly for performance reasons. The case when you
 would use it is if in trying to avoid using it, you end up with an unreadable
 failregex.

-Syslog
------
+Syslog:

 If your application logs to syslog you can take advantage of log line prefix
-definitions present in common.conf.  So as a base use::
+definitions present in common.conf.  So as a base use:

-  [INCLUDES]
-  
-  before = common.conf
-  
-  [Definition]
-  
-  _daemon = app
-  
-  failregex = ^%(__prefix_line)s
+[INCLUDES]
+
+before = common.conf
+
+[Definition]
+
+_daemon = app
+
+failregex = ^%(__prefix_line)s

 In this example common.conf defines __prefix_line which also contains the
 _daemon name (in syslog terms the service) you have just specified. _daemon
 can also be a regex.

-For example, to capture following line _daemon should be set to "dovecot"::
+For example, to capture following line _daemon should be set to "dovecot"

-  Dec 12 11:19:11 dunnart dovecot: pop3-login: Aborted login (tried to use disabled plaintext auth): rip=190.210.136.21, lip=113.212.99.193
+Dec 12 11:19:11 dunnart dovecot: pop3-login: Aborted login (tried to use disabled plaintext auth): rip=190.210.136.21, lip=113.212.99.193

-and then ``^%(__prefix_line)s`` would match "Dec 12 11:19:11 dunnart dovecot:
+and then ^%(__prefix_line)s would match "Dec 12 11:19:11 dunnart dovecot:
 ". Note it matches the trailing space(s) as well.

-Substitutions (AKA string interpolations)
-----------------------------------------
+Substitutions (AKA string interpolations):

 We have used string interpolations in above examples.  They are useful for
 making the regexes more readable, reuse generic patterns in multiple failregex
@@ -220,8 +213,7 @@ to the user.  General principle is that value of a _name variable replaces
 occurrences of %(_name)s within the same section or anywhere in the config file
 if defined in [DEFAULT] section.

-Regular Expressions
-------------------
+Regular Expressions:

 Regular expressions (failregex, ignoreregex) assume that the date/time has been
 removed from the log line (this is just how fail2ban works internally ATM).
@@ -244,33 +236,29 @@ If you have only a basic knowledge of regular repressions we advise to read
 http://docs.python.org/2/library/re.html first.  It doesn't take long and would
 remind you e.g. which characters you need to escape and which you don't.

-Developing/testing a regex
--------------------------
+Developing/testing a regex:

 You can develop a regex in a file or using command line depending on your
 preference. You can also use samples you have already created in the test cases
 or test them one at a time.

 The general tool for testing Fail2Ban regexes is fail2ban-regex. To see how to
-use it run::
+use it run:

-  ./fail2ban-regex --help
+./fail2ban-regex --help

 Take note of  -l heavydebug  / -l debug  and -v as they might be very useful.

-.. TIP::
-     Take a look at the source code of the application you are developing
+TIP: Take a look at the source code of the application you are developing
     failregex for. You may see optional or extra log messages, or parts there
     of, that need to form part of your regex.  It may also reveal how some
     parts are constrained and different formats depending on configuration or
     less common usages.

-.. TIP::
-     For looking through source code - http://sourcecodebrowser.com/ . It has
+TIP: For looking through source code - http://sourcecodebrowser.com/ . It has
     call graphs and can browse different versions.

-.. TIP::
-     Some applications log spaces at the end. If you are not sure add \s*$ as
+TIP: Some applications log spaces at the end. If you are not sure add \s*$ as
     the end part of the regex.

 If your regex is not matching, http://www.debuggex.com/?flavor=python can help
@@ -289,15 +277,13 @@ When you have fixed the regex put it back into your filter file.
 Please spread the good word about Debuggex - Serge Toarca is kindly continuing
 its free availability to Open Source developers.

-Finishing up
------------
+Finishing up:

 If you've added a new filter, add a new entry in config/jail.conf. The theory
 here is that a user will create a jail.local with [filtername]\nenable=true to
 enable your jail.

 So more specifically in the [filter] section in jail.conf:
-
 * ensure that you have "enabled = false" (users will enable as needed);
 * use "filter =" set to your filter name;
 * use a typical action to disable ports associated with the application;
@@ -309,7 +295,7 @@ Submit github pull request (See "Pull Requests" above) for
 github.com/fail2ban/fail2ban containing your great work.

 Filter Security
-===============
+---------------

 Poor filter regular expressions are susceptible to DoS attacks.

@@ -335,33 +321,33 @@ Examples of poor filters

 1. Too restrictive

-We find a log message::
+We find a log message:

    Apr-07-13 07:08:36 Invalid command fial2ban from 1.2.3.4

-We make a failregex::
+We make a failregex

    ^Invalid command \S+ from <HOST>

 Now think evil. The user does the command 'blah from 1.2.3.44'

-The program diligently logs::
+The program diligently logs:

    Apr-07-13 07:08:36 Invalid command blah from 1.2.3.44 from 1.2.3.4

 And fail2ban matches 1.2.3.44 as the IP that it ban. A DoS attack was successful.

-The fix here is that the command can be anything so .* is appropriate::
+The fix here is that the command can be anything so .* is appropriate.

    ^Invalid command .* from <HOST>

 Here the .* will match until the end of the string. Then realise it has more to
 match, i.e. "from <HOST>" and go back until it find this. Then it will ban
-1.2.3.4 correctly. Since the <HOST> is always at the end, end the regex with a $::
+1.2.3.4 correctly. Since the <HOST> is always at the end, end the regex with a $.

    ^Invalid command .* from <HOST>$

-Note if we'd just had the expression::
+Note if we'd just had the expression:

    ^Invalid command \S+ from <HOST>$

@@ -373,16 +359,16 @@ banned.
 From the Apache vulnerability CVE-2013-2178
 ( original ref: https://vndh.net/note:fail2ban-089-denial-service ).

-An example bad regex for Apache::
+An example bad regex for Apache:

    failregex = [[]client <HOST>[]] user .* not found

-Since the user can do a get request on::
+Since the user can do a get request on:

    GET /[client%20192.168.0.1]%20user%20root%20not%20found HTTP/1.0
-    Host: remote.site
+Host: remote.site

-Now the log line will be::
+Now the log line will be:

    [Sat Jun 01 02:17:42 2013] [error] [client 192.168.33.1] File does not exist: /srv/http/site/[client 192.168.0.1] user root not found

@@ -393,27 +379,27 @@ regex and blocks 192.168.33.1 as a denial of service from the HTTP requester.

 From: https://github.com/fail2ban/fail2ban/pull/426

-An example ssh log (simplified)::
+An example ssh log (simplified)

    Sep 29 17:15:02 spaceman sshd[12946]: Failed password for user from 127.0.0.1 port 20000 ssh1: ruser remoteuser

 As we assume username can include anything including spaces its prudent to put
-.* here. The remote user can also exist as anything so lets not make assumptions again::
+.* here. The remote user can also exist as anything so lets not make assumptions again.

    failregex = ^%(__prefix_line)sFailed \S+ for .* from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$

 So this works. The problem is if the .* after remote user is injected by the
-user to be 'from 1.2.3.4'. The resultant log line is::
+user to be 'from 1.2.3.4'. The resultant log line is.

    Sep 29 17:15:02 spaceman sshd[12946]: Failed password for user from 127.0.0.1 port 20000 ssh1: ruser from 1.2.3.4

-Testing with::
+Testing with:

    fail2ban-regex -v 'Sep 29 17:15:02 Failed password for user from 127.0.0.1 port 20000 ssh1: ruser from 1.2.3.4' '^ Failed \S+ for .* from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$'

-.. TIP:: I've removed the bit that matches __prefix_line from the regex and log.
+TIP: I've removed the bit that matches __prefix_line from the regex and log.

-Shows::
+Shows:

    1) [1] ^ Failed \S+ for .* from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$
       1.2.3.4  Sun Sep 29 17:15:02 2013
@@ -426,14 +412,14 @@ The result was that 1.2.3.4 was matched, injected by the user, and the wrong IP
 was banned.

 The solution here is to make the first .* non-greedy with .*?. Here it matches
-as little as required and the fail2ban-regex tool shows the output::
+as little as required and the fail2ban-regex tool shows the output:

    fail2ban-regex -v 'Sep 29 17:15:02 Failed password for user from 127.0.0.1 port 20000 ssh1: ruser from 1.2.3.4' '^ Failed \S+ for .*? from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$'

    1) [1] ^ Failed \S+ for .*? from <HOST>( port \d*)?( ssh\d+)?(: ruser .*)?$
       127.0.0.1  Sun Sep 29 17:15:02 2013

-So the general case here is a log line that contains::
+So the general case here is a log line that contains:

    (fixed_data_1)<HOST>(fixed_data_2)(user_injectable_data)

@@ -441,21 +427,20 @@ Where the regex that matches fixed_data_1 is gready and matches the entire
 string, before moving backwards and user_injectable_data can match the entire
 string.

-Another case
------------
+Another case:

 ref: https://www.debuggex.com/r/CtAbeKMa2sDBEfA2/0

-A webserver logs the following without URL escaping::
+A webserver logs the following without URL escaping:

    [error] 2865#0: *66647 user "xyz" was not found in "/file", client: 1.2.3.1, server: www.host.com, request: "GET ", client: 3.2.1.1, server: fake.com, request: "GET exploited HTTP/3.3", host: "injected.host", host: "www.myhost.com"

-regex::
+regex:

    failregex = ^ \[error\] \d+#\d+: \*\d+ user "\S+":? (?:password mismatch|was not found in ".*"), client: <HOST>, server: \S+, request: "\S+ .+ HTTP/\d+\.\d+", host: "\S+"

 The .* matches to the end of the string. Finds that it can't continue to match
-", client ... so it moves from the back and find that the user injected web URL::
+", client ... so it moves from the back and find that the user injected web URL:

    ", client: 3.2.1.1, server: fake.com, request: "GET exploited HTTP/3.3", host: "injected.host

@@ -468,17 +453,15 @@ beyond <HOST>.
 4. Application generates two identical log messages with different meanings

 If the application generates the following two messages under different
-circumstances::
+circumstances:

    client <IP>: authentication failed
    client <USER>: authentication failed


-Then it's obvious that a regex of ``^client <HOST>: authentication
-failed$`` will still cause problems if the user can trigger the second
+Then it's obvious that a regex of "^client <HOST>: authentication
+failed$" will still cause problems if the user can trigger the second
 log message with a <USER> of 123.1.1.1.

 Here there's nothing to do except request/change the application so it logs
 messages differently.
-
-
@@ -6,204 +6,169 @@ THANKS
 COPYING
 DEVELOP
 FILTERS
-fail2ban-2to3
+fail2ban-client
+fail2ban-server
+fail2ban-testcases
+fail2ban-regex
 fail2ban-testcases-all
-fail2ban-testcases-all-python3
-bin/fail2ban-client
-bin/fail2ban-server
-bin/fail2ban-testcases
-bin/fail2ban-regex
-doc/run-rootless.txt
-fail2ban/client/configreader.py
-fail2ban/client/configparserinc.py
-fail2ban/client/jailreader.py
-fail2ban/client/fail2banreader.py
-fail2ban/client/jailsreader.py
-fail2ban/client/beautifier.py
-fail2ban/client/filterreader.py
-fail2ban/client/actionreader.py
-fail2ban/client/__init__.py
-fail2ban/client/configurator.py
-fail2ban/client/csocket.py
-fail2ban/server/asyncserver.py
-fail2ban/server/database.py
-fail2ban/server/filter.py
-fail2ban/server/filterpyinotify.py
-fail2ban/server/filtergamin.py
-fail2ban/server/filterpoll.py
-fail2ban/server/filtersystemd.py
-fail2ban/server/iso8601.py
-fail2ban/server/server.py
-fail2ban/server/actions.py
-fail2ban/server/faildata.py
-fail2ban/server/failmanager.py
-fail2ban/server/datedetector.py
-fail2ban/server/jailthread.py
-fail2ban/server/transmitter.py
-fail2ban/server/action.py
-fail2ban/server/ticket.py
-fail2ban/server/jail.py
-fail2ban/server/jails.py
-fail2ban/server/__init__.py
-fail2ban/server/banmanager.py
-fail2ban/server/datetemplate.py
-fail2ban/server/mytime.py
-fail2ban/server/failregex.py
-fail2ban/server/database.py
-fail2ban/tests/banmanagertestcase.py
-fail2ban/tests/failmanagertestcase.py
-fail2ban/tests/clientreadertestcase.py
-fail2ban/tests/filtertestcase.py
-fail2ban/tests/__init__.py
-fail2ban/tests/dummyjail.py
-fail2ban/tests/samplestestcase.py
-fail2ban/tests/datedetectortestcase.py
-fail2ban/tests/actiontestcase.py
-fail2ban/tests/servertestcase.py
-fail2ban/tests/sockettestcase.py
-fail2ban/tests/utils.py
-fail2ban/tests/misctestcase.py
-fail2ban/tests/databasetestcase.py
-fail2ban/tests/config/jail.conf
-fail2ban/tests/config/fail2ban.conf
-fail2ban/tests/config/paths-common.conf
-fail2ban/tests/config/paths-freebsd.conf
-fail2ban/tests/config/paths-osx.conf
-fail2ban/tests/config/paths-debian.conf
-fail2ban/tests/config/filter.d/simple.conf
-fail2ban/tests/config/action.d/brokenaction.conf
-fail2ban/tests/files/config/apache-auth/digest/.htaccess
-fail2ban/tests/files/config/apache-auth/digest/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest_time/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_time/.htpasswd
-fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htaccess
-fail2ban/tests/files/config/apache-auth/basic/authz_owner/cant_get_me.html
-fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htpasswd
-fail2ban/tests/files/config/apache-auth/basic/file/.htaccess
-fail2ban/tests/files/config/apache-auth/basic/file/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest.py
-fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest_anon/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_anon/.htpasswd
-fail2ban/tests/files/config/apache-auth/README
-fail2ban/tests/files/config/apache-auth/noentry/.htaccess
-fail2ban/tests/files/database_v1.db
-fail2ban/tests/files/ignorecommand.py
-fail2ban/tests/files/filter.d/substition.conf
-fail2ban/tests/files/filter.d/testcase-common.conf
-fail2ban/tests/files/filter.d/testcase01.conf
-fail2ban/tests/files/testcase01.log
-fail2ban/tests/files/testcase02.log
-fail2ban/tests/files/testcase03.log
-fail2ban/tests/files/testcase04.log
-fail2ban/tests/files/testcase-usedns.log
-fail2ban/tests/files/testcase-journal.log
-fail2ban/tests/files/testcase-multiline.log
-fail2ban/tests/files/logs/bsd/syslog-plain.txt
-fail2ban/tests/files/logs/bsd/syslog-v.txt
-fail2ban/tests/files/logs/bsd/syslog-vv.txt
-fail2ban/tests/files/logs/3proxy
-fail2ban/tests/files/logs/apache-auth
-fail2ban/tests/files/logs/apache-badbots
-fail2ban/tests/files/logs/apache-botscripts
-fail2ban/tests/files/logs/apache-modsecurity
-fail2ban/tests/files/logs/apache-nohome
-fail2ban/tests/files/logs/apache-noscript
-fail2ban/tests/files/logs/apache-overflows
-fail2ban/tests/files/logs/assp
-fail2ban/tests/files/logs/asterisk
-fail2ban/tests/files/logs/counter-strike
-fail2ban/tests/files/logs/courier-auth
-fail2ban/tests/files/logs/courier-smtp
-fail2ban/tests/files/logs/cyrus-imap
-fail2ban/tests/files/logs/dovecot
-fail2ban/tests/files/logs/dropbear
-fail2ban/tests/files/logs/ejabberd-auth
-fail2ban/tests/files/logs/exim
-fail2ban/tests/files/logs/exim-spam
-fail2ban/tests/files/logs/freeswitch
-fail2ban/tests/files/logs/groupoffice
-fail2ban/tests/files/logs/gssftpd
-fail2ban/tests/files/logs/guacamole
-fail2ban/tests/files/logs/kerio
-fail2ban/tests/files/logs/lighttpd-auth
-fail2ban/tests/files/logs/mysqld-auth
-fail2ban/tests/files/logs/nagios
-fail2ban/tests/files/logs/nsd
-fail2ban/tests/files/logs/perdition
-fail2ban/tests/files/logs/php-url-fopen
-fail2ban/tests/files/logs/postfix-sasl
-fail2ban/tests/files/logs/named-refused
-fail2ban/tests/files/logs/nginx-http-auth
-fail2ban/tests/files/logs/pam-generic
-fail2ban/tests/files/logs/postfix
-fail2ban/tests/files/logs/proftpd
-fail2ban/tests/files/logs/pure-ftpd
-fail2ban/tests/files/logs/qmail
-fail2ban/tests/files/logs/recidive
-fail2ban/tests/files/logs/roundcube-auth
-fail2ban/tests/files/logs/selinux-ssh
-fail2ban/tests/files/logs/sendmail-spam
-fail2ban/tests/files/logs/sieve
-fail2ban/tests/files/logs/squid
-fail2ban/tests/files/logs/stunnel
-fail2ban/tests/files/logs/suhosin
-fail2ban/tests/files/logs/sogo-auth
-fail2ban/tests/files/logs/solid-pop3d
-fail2ban/tests/files/logs/sshd
-fail2ban/tests/files/logs/sshd-ddos
-fail2ban/tests/files/logs/vsftpd
-fail2ban/tests/files/logs/webmin-auth
-fail2ban/tests/files/logs/wuftpd
-fail2ban/tests/files/logs/uwimap-auth
-fail2ban/tests/files/logs/xinetd-fail
-fail2ban/tests/config/jail.conf
-fail2ban/tests/config/fail2ban.conf
-fail2ban/tests/config/filter.d/simple.conf
-fail2ban/tests/config/action.d/brokenaction.conf
-setup.py
-setup.cfg
-fail2ban/__init__.py
-fail2ban/exceptions.py
-fail2ban/helpers.py
-fail2ban/version.py
-fail2ban/protocol.py
 setup.py
 setup.cfg
 kill-server
+client/configreader.py
+client/configparserinc.py
+client/jailreader.py
+client/fail2banreader.py
+client/jailsreader.py
+client/beautifier.py
+client/filterreader.py
+client/actionreader.py
+client/__init__.py
+client/configurator.py
+client/csocket.py
+server/asyncserver.py
+server/filter.py
+server/filterpyinotify.py
+server/filtergamin.py
+server/filterpoll.py
+server/iso8601.py
+server/server.py
+server/actions.py
+server/faildata.py
+server/failmanager.py
+server/datedetector.py
+server/jailthread.py
+server/transmitter.py
+server/action.py
+server/ticket.py
+server/jail.py
+server/jails.py
+server/__init__.py
+server/banmanager.py
+server/datetemplate.py
+server/mytime.py
+server/failregex.py
+testcases/actionstestcase.py
+testcases/dummyjail.py
+testcases/files/ignorecommand.py
+testcases/files/testcase-usedns.log
+testcases/files/logs/bsd/syslog-plain.txt
+testcases/files/logs/bsd/syslog-v.txt
+testcases/files/logs/bsd/syslog-vv.txt
+testcases/files/logs/apache-overflows
+testcases/files/logs/apache-modsecurity
+testcases/files/logs/assp
+testcases/files/logs/asterisk
+testcases/files/logs/dovecot
+testcases/files/logs/ejabberd-auth
+testcases/files/logs/exim
+testcases/files/logs/freeswitch
+testcases/files/logs/groupoffice
+testcases/files/logs/horde
+testcases/files/logs/suhosin
+testcases/files/logs/mysqld-auth
+testcases/files/logs/named-refused
+testcases/files/logs/nagios
+testcases/files/logs/nginx-http-auth
+testcases/files/logs/nsd
+testcases/files/logs/openwebmail
+testcases/files/logs/pam-generic
+testcases/files/logs/postfix
+testcases/files/logs/proftpd
+testcases/files/logs/pure-ftpd
+testcases/files/logs/roundcube-auth
+testcases/files/logs/postfix-sasl
+testcases/files/logs/sogo-auth
+testcases/files/logs/solid-pop3d
+testcases/files/logs/squid
+testcases/files/logs/sshd
+testcases/files/logs/sshd-ddos
+testcases/files/logs/vsftpd
+testcases/files/logs/webmin-auth
+testcases/files/logs/wuftpd
+testcases/files/logs/3proxy
+testcases/files/logs/apache-auth
+testcases/files/logs/apache-badbots
+testcases/files/logs/apache-nohome
+testcases/files/logs/apache-noscript
+testcases/files/logs/courierlogin
+testcases/files/logs/couriersmtp
+testcases/files/logs/cyrus-imap
+testcases/files/logs/dropbear
+testcases/files/logs/exim-spam
+testcases/files/logs/gssftpd
+testcases/files/logs/lighttpd-auth
+testcases/files/logs/mysqld-auth
+testcases/files/logs/perdition
+testcases/files/logs/php-url-fopen
+testcases/files/logs/qmail
+testcases/files/logs/recidive
+testcases/files/logs/sieve
+testcases/files/logs/selinux-ssh
+testcases/files/logs/sendmail-auth
+testcases/files/logs/sendmail-reject
+testcases/files/logs/suhosin
+testcases/files/logs/uwimap-auth
+testcases/files/logs/wuftpd
+testcases/files/logs/xinetd-fail
+testcases/files/config/apache-auth/digest/.htaccess
+testcases/files/config/apache-auth/digest/.htpasswd
+testcases/files/config/apache-auth/digest_time/.htaccess
+testcases/files/config/apache-auth/digest_time/.htpasswd
+testcases/files/config/apache-auth/basic/authz_owner/.htaccess
+testcases/files/config/apache-auth/basic/authz_owner/cant_get_me.html
+testcases/files/config/apache-auth/basic/authz_owner/.htpasswd
+testcases/files/config/apache-auth/basic/file/.htaccess
+testcases/files/config/apache-auth/basic/file/.htpasswd
+testcases/files/config/apache-auth/digest.py
+testcases/files/config/apache-auth/digest_wrongrelm/.htaccess
+testcases/files/config/apache-auth/digest_wrongrelm/.htpasswd
+testcases/files/config/apache-auth/digest_anon/.htaccess
+testcases/files/config/apache-auth/digest_anon/.htpasswd
+testcases/files/config/apache-auth/README
+testcases/files/config/apache-auth/noentry/.htaccess
+testcases/samplestestcase.py
+testcases/banmanagertestcase.py
+testcases/failmanagertestcase.py
+testcases/clientreadertestcase.py
+testcases/filtertestcase.py
+testcases/__init__.py
+testcases/datedetectortestcase.py
+testcases/actiontestcase.py
+testcases/servertestcase.py
+testcases/sockettestcase.py
+testcases/files/testcase01.log
+testcases/files/testcase02.log
+testcases/files/testcase03.log
+testcases/files/testcase04.log
+testcases/misctestcase.py
+testcases/utils.py
+common/__init__.py
+common/exceptions.py
+common/helpers.py
+common/version.py
+common/protocol.py
 config/jail.conf
-config/fail2ban.conf
 config/filter.d/common.conf
 config/filter.d/apache-auth.conf
 config/filter.d/apache-badbots.conf
-config/filter.d/apache-botsearch.conf
 config/filter.d/apache-modsecurity.conf
 config/filter.d/apache-nohome.conf
 config/filter.d/apache-noscript.conf
 config/filter.d/apache-overflows.conf
 config/filter.d/nginx-http-auth.conf
-config/filter.d/counter-strike.conf
-config/filter.d/courier-auth.conf
-config/filter.d/courier-smtp.conf
+config/filter.d/courierlogin.conf
+config/filter.d/couriersmtp.conf
 config/filter.d/cyrus-imap.conf
 config/filter.d/ejabberd-auth.conf
 config/filter.d/exim.conf
 config/filter.d/freeswitch.conf
 config/filter.d/gssftpd.conf
-config/filter.d/kerio.conf
 config/filter.d/horde.conf
 config/filter.d/suhosin.conf
 config/filter.d/nagios.conf
 config/filter.d/named-refused.conf
 config/filter.d/nsd.conf
 config/filter.d/openwebmail.conf
-config/filter.d/pam-generic.conf
-config/filter.d/php-url-fopen.conf
-config/filter.d/postfix-sasl.conf
-config/filter.d/pam-generic.conf
-config/filter.d/php-url-fopen.conf
-config/filter.d/postfix-sasl.conf
 config/filter.d/postfix.conf
 config/filter.d/proftpd.conf
 config/filter.d/pure-ftpd.conf
@@ -218,7 +183,6 @@ config/filter.d/solid-pop3d.conf
 config/filter.d/squid.conf
 config/filter.d/sshd.conf
 config/filter.d/sshd-ddos.conf
-config/filter.d/stunnel.conf
 config/filter.d/vsftpd.conf
 config/filter.d/webmin-auth.conf
 config/filter.d/wuftpd.conf
@@ -238,15 +202,9 @@ config/filter.d/3proxy.conf
 config/filter.d/apache-common.conf
 config/filter.d/exim-common.conf
 config/filter.d/exim-spam.conf
-config/filter.d/freeswitch.conf
 config/filter.d/groupoffice.conf
 config/filter.d/perdition.conf
 config/filter.d/uwimap-auth.conf
-config/filter.d/courier-auth.conf
-config/filter.d/courier-smtp.conf
-config/filter.d/ejabberd-auth.conf
-config/filter.d/guacamole.conf
-config/filter.d/sendmail-spam.conf
 config/action.d/apf.conf
 config/action.d/blocklist_de.conf
 config/action.d/osx-afctl.conf
@@ -258,7 +216,7 @@ config/action.d/dummy.conf
 config/action.d/firewallcmd-new.conf
 config/action.d/firewallcmd-ipset.conf
 config/action.d/iptables-ipset-proto6-allports.conf
-config/action.d/iptables-common.conf
+config/action.d/iptables-blocktype.conf
 config/action.d/iptables-ipset-proto4.conf
 config/action.d/iptables-ipset-proto6.conf
 config/action.d/iptables-xt_recent-echo.conf
@@ -281,11 +239,9 @@ config/action.d/mynetwatchman.conf
 config/action.d/pf.conf
 config/action.d/sendmail.conf
 config/action.d/sendmail-buffered.conf
-config/action.d/sendmail-whois-ipmatches.conf
 config/action.d/sendmail-whois.conf
 config/action.d/sendmail-whois-lines.conf
 config/action.d/shorewall.conf
-config/action.d/xarf-login-attack.conf
 config/action.d/ufw.conf
 config/fail2ban.conf
 doc/run-rootless.txt
@@ -316,3 +272,7 @@ files/fail2ban-tmpfiles.conf
 files/fail2ban.service
 files/ipmasq-ZZZzzz_fail2ban.rul
 files/gen_badbots
+testcases/config/jail.conf
+testcases/config/fail2ban.conf
+testcases/config/filter.d/simple.conf
+testcases/config/action.d/brokenaction.conf
@@ -1,4 +0,0 @@
-include ChangeLog COPYING DEVELOP FILTERS README.* THANKS TODO
-graft doc
-graft files
-recursive-include config *.conf *.py
@@ -2,7 +2,7 @@
                        / _|__ _(_) |_  ) |__  __ _ _ _  
                       |  _/ _` | | |/ /| '_ \/ _` | ' \ 
                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
-                       v0.9.0                  2014/03/14
+                       v0.8.14                 2014/08/19

 ## Fail2Ban: ban hosts that cause multiple authentication errors

@@ -11,11 +11,6 @@ password failures. It updates firewall rules to reject the IP address. These
 rules can be defined by the user. Fail2Ban can read multiple log files such as
 sshd or Apache web server ones.

-Fail2Ban is able to reduce the rate of incorrect authentications attempts
-however it cannot eliminate the risk that weak authentication presents.
-Configure services to use only two factor or public/private authentication
-mechanisms if you really want to protect services.
-
 This README is a quick introduction to Fail2ban. More documentation, FAQ, HOWTOs
 are available in fail2ban(1) manpage and on the website http://www.fail2ban.org

@@ -26,22 +21,21 @@ Installation:
 this case, you should use it instead.**

 Required:
- [Python2 >= 2.6 or Python >= 3.2](http://www.python.org) or [PyPy](http://pypy.org)
+- [Python >= 2.4](http://www.python.org)

 Optional:
 - [pyinotify >= 0.8.3](https://github.com/seb-m/pyinotify)
  - Linux >= 2.6.13
 - [gamin >= 0.0.21](http://www.gnome.org/~veillard/gamin)
- [systemd >= 204](http://www.freedesktop.org/wiki/Software/systemd)

 To install, just do:

-    tar xvfj fail2ban-0.9.0.tar.bz2
-    cd fail2ban-0.9.0
+    tar xvfj fail2ban-0.8.12.tar.bz2
+    cd fail2ban-0.8.12
    python setup.py install

-This will install Fail2Ban into the python library directory. The executable
-scripts are placed into /usr/bin, and configuration under /etc/fail2ban.
+This will install Fail2Ban into /usr/share/fail2ban. The executable scripts are
+placed into /usr/bin, and configuration under /etc/fail2ban.

 Fail2Ban should be correctly installed now. Just type:

@@ -56,7 +50,8 @@ Configuration:
 You can configure Fail2Ban using the files in /etc/fail2ban. It is possible to
 configure the server using commands sent to it by fail2ban-client. The
 available commands are described in the fail2ban-client(1) manpage.  Also see
-fail2ban(1) and jail.conf(5)  manpages for further references.
+fail2ban(1) manpage for further references and find even more documentation on
+the website: http://www.fail2ban.org

 Code status:
 ------------
@@ -68,12 +63,24 @@ Code status:
 Contact:
 --------

-### Bugs, feature requests, discussions?
-See [CONTRIBUTING.md](https://github.com/fail2ban/fail2ban/blob/master/CONTRIBUTING.md)
+### You found a severe security vulnerability in Fail2Ban?
+email details to fail2ban-vulnerabilities at lists dot sourceforge dot net .
+
+### You need some new features, you found bugs?
+visit [Issues](https://github.com/fail2ban/fail2ban/issues)
+and if your issue is not yet known -- file a bug report. See
+[Fail2Ban wiki](http://www.fail2ban.org/wiki/index.php/HOWTO_Seek_Help)
+on further instructions.
+
+### You would like to troubleshoot or discuss?
+join the [mailing list](https://lists.sourceforge.net/lists/listinfo/fail2ban-users)
+
+### You would like to contribute (new filters/actions/code/documentation)?
+send a pull request

 ### You just appreciate this program:
-send kudos to the original author ([Cyril Jaquier](mailto: Cyril Jaquier <cyril.jaquier@fail2ban.org>))
-or *better* to the [mailing list](https://lists.sourceforge.net/lists/listinfo/fail2ban-users)
+send kudos to the original author ([Cyril Jaquier](mailto: Cyril Jaquier <cyril.jaquier@fail2ban.org>)
+or better to the [mailing list](https://lists.sourceforge.net/lists/listinfo/fail2ban-users)
 since Fail2Ban is "community-driven" for years now.

 Thanks:
@@ -1,197 +0,0 @@
-..                       __      _ _ ___ _
-                        / _|__ _(_) |_  ) |__  __ _ _ _
-                       |  _/ _` | | |/ /| '_ \/ _` | ' \
-                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
-
-================================================================================
-How to do a release for Fail2Ban
-================================================================================
-
-Preparation
-===========
-
-* Check distribution patches and see if they can be included
-
-  * https://apps.fedoraproject.org/packages/fail2ban/sources
-  * http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-analyzer/fail2ban/
-  * http://svnweb.freebsd.org/ports/head/security/py-fail2ban/
-  * https://build.opensuse.org/package/show?package=fail2ban&project=openSUSE%3AFactory
-  * http://sophie.zarb.org/sources/fail2ban (Mageia)
-  * https://trac.macports.org/browser/trunk/dports/security/fail2ban
-
-
-* Check distribution outstanding bugs
-
-  * https://github.com/fail2ban/fail2ban/issues?sort=updated&state=open
-  * http://bugs.debian.org/cgi-bin/pkgreport.cgi?dist=unstable;package=fail2ban
-  * https://bugs.launchpad.net/ubuntu/+source/fail2ban
-  * http://bugs.sabayon.org/buglist.cgi?quicksearch=net-analyzer%2Ffail2ban
-  * https://bugs.archlinux.org/?project=5&cat%5B%5D=33&string=fail2ban
-  * https://bugs.gentoo.org/buglist.cgi?query_format=advanced&short_desc=fail2ban&bug_status=UNCONFIRMED&bug_status=CONFIRMED&bug_status=IN_PROGRESS&short_desc_type=allwords
-  * https://bugzilla.redhat.com/buglist.cgi?query_format=advanced&bug_status=NEW&bug_status=ASSIGNED&component=fail2ban&classification=Red%20Hat&classification=Fedora
-  * http://www.freebsd.org/cgi/query-pr-summary.cgi?text=fail2ban
-  * https://bugs.mageia.org/buglist.cgi?quicksearch=fail2ban
-  * https://build.opensuse.org/package/requests/openSUSE:Factory/fail2ban
-
-
-* Make sure the tests pass::
-
-  ./fail2ban-testcases-all
-
-* Ensure the version is correct in:
-
-  * ./fail2ban/version.py
-  * top of ChangeLog
-  * README.md
-
-
-* Ensure the MANIFEST is complete
-
-* Run::
-
-  python setup.py sdist
-
-* Look for errors like::
-
-   'testcases/files/logs/mysqld.log' not a regular file -- skipping
-
-  * Which indicates that testcases/files/logs/mysqld.log has been moved or is a directory::
-
-      tar -C /tmp -jxf dist/fail2ban-0.9.0.tar.bz2
-
-* clean up current direcory::
-
-    diff -rul --exclude \*.pyc . /tmp/fail2ban-0.9.0/
-
-  * Only differences should be files that you don't want distributed.
-
-
-* Ensure the tests work from the tarball::
-
-    cd /tmp/fail2ban-0.9.0/ && export PYTHONPATH=`pwd` && bin/fail2ban-testcases
-
-* Add/finalize the corresponding entry in the ChangeLog
-
-  * To generate a list of committers use e.g.::
-
-      git shortlog -sn 0.8.12.. | sed -e 's,^[ 0-9\t]*,,g' | tr '\n' '\|' | sed -e 's:|:, :g'
-
-  * Ensure the top of the ChangeLog has the right version and current date.
-  * Ensure the top entry of the ChangeLog has the right version and current date.
-
-* Update man pages::
-
-    (cd man ; ./generate-man )
-    git commit -m 'DOC/ENH: update man pages for release' man/*
-
-* Cleanout TODO file with the finished stuff
-
-* Prepare source and rpm binary distributions::
-
-    python setup.py sdist
-
-  * Broken for now:  python setup.py bdist_rpm
-  * Broken for now:  python setup.py upload
-
-
-* Tag the release by using a signed (and annotated) tag.  Cut/paste
-  release ChangeLog entry as tag annotation::
-
-    git tag -s 0.9.1
-
-Pre Release
-===========
-
-* Provide a release sample to distributors
-
-  * Arch Linux:
-
-    * https://www.archlinux.org/packages/community/any/fail2ban/
-
-  * Debian: Yaroslav Halchenko <debian@onerussian.com>
-
-    * http://packages.qa.debian.org/f/fail2ban.html
-
-  * FreeBSD: Christoph Theis theis@gmx.at>, Nick Hilliard <nick@foobar.org>
-
-    * http://svnweb.freebsd.org/ports/head/security/py-fail2ban/Makefile?view=markup
-    * http://www.freebsd.org/cgi/query-pr-summary.cgi?text=fail2ban
-
-  * Fedora: Axel Thimm <Axel.Thimm@atrpms.net>
-
-    * https://apps.fedoraproject.org/packages/fail2ban
-    * http://pkgs.fedoraproject.org/cgit/fail2ban.git
-    * https://admin.fedoraproject.org/pkgdb/acls/bugs/fail2ban
-
-  * Gentoo: netmon@gentoo.org
-
-    * http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-analyzer/fail2ban/metadata.xml?view=markup
-    * https://bugs.gentoo.org/buglist.cgi?quicksearch=fail2ban
-
-  * openSUSE: Stephan Kulow <coolo@suse.com>
-
-    * https://build.opensuse.org/package/show/openSUSE:Factory/fail2ban
-
-  * Mac Ports: @Malbrouck on github (gh-49)
-
-    * https://trac.macports.org/browser/trunk/dports/security/fail2ban/Portfile
-
-  * Mageia:
-
-    * https://bugs.mageia.org/buglist.cgi?quicksearch=fail2ban
-
-  * An potentially to the fail2ban-users email list.
-
-
-* Wait for feedback from distributors
-
-* Prepare a release notice https://github.com/fail2ban/fail2ban/releases/new
-
-* Upload the source/binaries from the dist directory and tag the release using the URL
-
-* Upload source/binaries to sourceforge http://sourceforge.net/projects/fail2ban/
-
-* Run the following and update the wiki with output::
-
-    python -c 'import fail2ban.protocol; fail2ban.protocol.printWiki()'
-
-  * page: http://www.fail2ban.org/wiki/index.php/Commands
-
-
-* Update:
-
-  * http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_Versions&action=edit
-
-  * http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_News&action=edit
-    * move old bits to http://www.fail2ban.org/wiki/index.php?title=Template:Fail2ban_OldNews&action=edit
-
-  * http://www.fail2ban.org/wiki/index.php/ChangeLog
-  * http://www.fail2ban.org/wiki/index.php/Requirements (Check requirement)
-  * http://www.fail2ban.org/wiki/index.php/Features
-
-* See if any filters are upgraded:
-  http://www.fail2ban.org/wiki/index.php/Special:AllPages
-
-* Email users and development list of release
-
-* notify distributors
-
-Post Release
-============
-
-Add the following to the top of the ChangeLog::
-
-  ver. 0.9.1 (2014/XX/XXX) - wanna-be-released
-  -----------
-  
-  - Fixes:
-  
-  - New Features:
-  
-  - Enhancements:
-
-Alter the git shortlog command in the previous section to refer to the just
-released version.
-
-and adjust fail2ban/version.py to carry .dev suffix to signal
-a version under development.
@@ -40,18 +40,12 @@ Frédéric
 Georgiy Mernov
 Guilhem Lettron
 Guillaume Delvit
-Hank Leininger
 Hanno 'Rince' Wagner
-Helmut Grohne
 Iain Lea
-Ioan Indreias
 Ivo Truxa
-John Thoe
 Jacques Lav!gnotte
-Johannes Weberhofer
-Jason H Martin
+Ioan Indreias
 Jisoo Park
-Joel M Snyder
 Jonathan Kamens
 Jonathan Lanning
 Jonathan Underwood
@@ -62,9 +56,7 @@ Justin Shore
 Kévin Drapel
 kjohnsonecl
 kojiro
-Lars Kneschke
 Lee Clemens
-leftyfb (Mike Rushton)
 Manuel Arostegui Ramirez
 Marcel Dopita
 Mark Edgington
@@ -77,13 +69,9 @@ mEDI
 Merijn Schering
 Michael C. Haller
 Michael Hanselmann
-Mika (mkl)
 Nick Munger
-onorua
-Paul Marrapese
 Noel Butler
 Patrick Börjesson
-Pressy
 Raphaël Marichez
 RealRancor
 René Berber
@@ -91,28 +79,22 @@ Robert Edeker
 Rolf Fokkens
 Roman Gelfand
 Russell Odom
-SATO Kentaro
-Sean DuBois
 Sebastian Arcus
-Serg G. Brester
 Sireyessire
 silviogarbes
 Stefan Tatschner
 Stephen Gildea
 Steven Hiscocks
-TESTOVIK
 Tom Pike
 Tomas Pihl
-Tony Lawrence
 Tomasz Ciolek
 Tyler
 Vaclav Misek
 Vincent Deffontaines
 Yaroslav Halchenko
 Winston Smith
-Yehuda Katz
 ykimon
-Yung-Chin Oei
+Yehuda Katz
 Zbigniew Jędrzejewski-Szmek
 zugeschmiert
 Zurd
@@ -7,12 +7,26 @@
 ToDo
 ================================================================================

+See https://github.com/fail2ban/fail2ban/issues?state=open for the list of
+current outstanding issues and wishlists.  They should also be sorted among
+milestones and tagged for filtering.  This file reflects possibly outdated
+plans but is kept for someone to move them into github's issues.
+
 Legend:
 - not yet done
 ? maybe
 # partially done
 * done

+* Removed relative imports
+
+* Cleanup fail2ban-client and fail2ban-server. Move code to server/ and client/
+
+- Add timeout to external commands (signal alarm, watchdog thread, etc)
+
+- Uniformize filters and actions name. Use the software name (openssh, postfix,
+  proftp) and possible qualifier (e.g. auth) after a '-'
+
 - Added <USER> tag for failregex. Add features using this information. Maybe add
  more tags

@@ -23,10 +37,23 @@ Legend:
 - Auto-enable function (search for log files), check modification date to see if
  service is still in use

+- Improve parsing of the action parameters in jailreader.py
+
 - Better handling of the protocol in transmitter.py

 - Add gettext support (I18N)

+- Multiline log reading
+
+- Improve execution of action. Why does subprocess.call deadlock with
+  multi-jails?
+
+# see Feature Request Tracking System at SourceForge.net
+
 # improve documentation and website for user

 # better return values in function
+
+# refactoring in server.py, actions.py, filter.py
+
+* New backend: pyinotify
@@ -1,35 +0,0 @@
-Vagrant.configure("2") do |config|
-
-  config.vm.define "builder" do |builder|
-    builder.vm.box = "vm144"
-    builder.vm.provision "shell", path: "provision.sh"
-  end
-
-    config.vm.define "secure" do |secure|
-        secure.vm.box = "ubuntu/trusty64"
-        secure.vm.hostname = "secure.dev.fail2ban.org"
-        secure.vm.network "private_network", ip: "192.168.200.100"
-
-#        secure.vm.synced_folder 'salt/roots', '/srv/salt'
-
-#        secure.vm.provision :salt do |salt|
-#            salt.minion_config = 'salt/minion'
-#            salt.run_highstate = true
-#            salt.verbose = true
-#        end
-    end
-
-    config.vm.define "attacker" do |attacker|
-        attacker.vm.box = "ubuntu/trusty64"
-        attacker.vm.hostname = "attacker.dev.fail2ban.org"
-        attacker.vm.network "private_network", ip: "192.168.200.150"
-
-#        attacker.vm.synced_folder 'salt/roots', '/srv/salt'
-
-#        attacker.vm.provision :salt do |salt|
-#            salt.minion_config = 'salt/minion'
-#            salt.run_highstate = true
-#            salt.verbose = true
-#        end
-    end
-end
@@ -1,129 +0,0 @@
-#!/usr/bin/python
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-"""Script to run Fail2Ban tests battery
-"""
-
-# This file is part of Fail2Ban.
-#
-# Fail2Ban is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Fail2Ban is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-
-__author__ = "Cyril Jaquier"
-__copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2012- Yaroslav Halchenko"
-__license__ = "GPL"
-
-import logging
-import unittest, sys, time, os
-
-# Check if local fail2ban module exists, and use if it exists by 
-# modifying the path. This is such that tests can be used in dev
-# environment.
-if os.path.exists("fail2ban/__init__.py"):
-	sys.path.insert(0, ".")
-from fail2ban.version import version
-
-from fail2ban.tests.utils import gatherTests
-from fail2ban.helpers import FormatterWithTraceBack, getLogger
-from fail2ban.server.mytime import MyTime
-
-from optparse import OptionParser, Option
-
-def get_opt_parser():
-	# use module docstring for help output
-	p = OptionParser(
-				usage="%s [OPTIONS] [regexps]\n" % sys.argv[0] + __doc__,
-				version="%prog " + version)
-
-	p.add_options([
-		Option('-l', "--log-level", type="choice",
-			   dest="log_level",
-			   choices=('heavydebug', 'debug', 'info', 'notice', 'warning', 'error', 'critical'),
-			   default=None,
-			   help="Log level for the logger to use during running tests"),
-		Option('-n', "--no-network", action="store_true",
-			   dest="no_network",
-			   help="Do not run tests that require the network"),
-		Option("-t", "--log-traceback", action='store_true',
-			   help="Enrich log-messages with compressed tracebacks"),
-		Option("--full-traceback", action='store_true',
-			   help="Either to make the tracebacks full, not compressed (as by default)"),
-
-		])
-
-	return p
-
-parser = get_opt_parser()
-(opts, regexps) = parser.parse_args()
-
-#
-# Logging
-#
-logSys = getLogger("fail2ban")
-
-# Numerical level of verbosity corresponding to a log "level"
-verbosity = {'heavydebug': 4,
-			 'debug': 3,
-			 'info': 2,
-			 'notice': 2,
-			 'warning': 1,
-			 'error': 1,
-			 'critical': 0,
-			 None: 1}[opts.log_level]
-
-if opts.log_level is not None: # pragma: no cover
-	# so we had explicit settings
-	logSys.setLevel(getattr(logging, opts.log_level.upper()))
-else: # pragma: no cover
-	# suppress the logging but it would leave unittests' progress dots
-	# ticking, unless like with '-l critical' which would be silent
-	# unless error occurs
-	logSys.setLevel(getattr(logging, 'CRITICAL'))
-
-# Add the default logging handler
-stdout = logging.StreamHandler(sys.stdout)
-
-fmt = ' %(message)s'
-
-if opts.log_traceback:
-	Formatter = FormatterWithTraceBack
-	fmt = (opts.full_traceback and ' %(tb)s' or ' %(tbc)s') + fmt
-else:
-	Formatter = logging.Formatter
-
-# Custom log format for the verbose tests runs
-if verbosity > 1: # pragma: no cover
-	stdout.setFormatter(Formatter(' %(asctime)-15s %(thread)s' + fmt))
-else: # pragma: no cover
-	# just prefix with the space
-	stdout.setFormatter(Formatter(fmt))
-logSys.addHandler(stdout)
-
-#
-# Let know the version
-#
-if not opts.log_level or opts.log_level != 'critical': # pragma: no cover
-	print(("Fail2ban %s test suite. Python %s. Please wait..." \
-	    % (version, str(sys.version).replace('\n', ''))))
-
-tests = gatherTests(regexps, opts.no_network)
-#
-# Run the tests
-#
-testRunner = unittest.TextTestRunner(verbosity=verbosity)
-
-tests_results = testRunner.run(tests)
-
-if not tests_results.wasSuccessful(): # pragma: no cover
-	sys.exit(1)
@@ -0,0 +1,90 @@
+# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
+# vi: set ft=python sts=4 ts=4 sw=4 noet :
+
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+# Author: Cyril Jaquier
+# 
+
+__author__ = "Cyril Jaquier"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import logging
+from configreader import ConfigReader
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class ActionReader(ConfigReader):
+	
+	def __init__(self, action, name, **kwargs):
+		ConfigReader.__init__(self, **kwargs)
+		self.__file = action[0]
+		self.__cInfo = action[1]
+		self.__name = name
+	
+	def setFile(self, fileName):
+		self.__file = fileName
+	
+	def getFile(self):
+		return self.__file
+	
+	def setName(self, name):
+		self.__name = name
+	
+	def getName(self):
+		return self.__name
+	
+	def read(self):
+		return ConfigReader.read(self, "action.d/" + self.__file)
+	
+	def getOptions(self, pOpts):
+		opts = [["string", "actionstart", ""],
+				["string", "actionstop", ""],
+				["string", "actioncheck", ""],
+				["string", "actionban", ""],
+				["string", "actionunban", ""]]
+		self.__opts = ConfigReader.getOptions(self, "Definition", opts, pOpts)
+		
+		if self.has_section("Init"):
+			for opt in self.options("Init"):
+				if not self.__cInfo.has_key(opt):
+					self.__cInfo[opt] = self.get("Init", opt)
+	
+	def convert(self):
+		head = ["set", self.__name]
+		stream = list()
+		stream.append(head + ["addaction", self.__file])
+		for opt in self.__opts:
+			if opt == "actionstart":
+				stream.append(head + ["actionstart", self.__file, self.__opts[opt]])
+			elif opt == "actionstop":
+				stream.append(head + ["actionstop", self.__file, self.__opts[opt]])
+			elif opt == "actioncheck":
+				stream.append(head + ["actioncheck", self.__file, self.__opts[opt]])
+			elif opt == "actionban":
+				stream.append(head + ["actionban", self.__file, self.__opts[opt]])
+			elif opt == "actionunban":
+				stream.append(head + ["actionunban", self.__file, self.__opts[opt]])
+		# cInfo
+		if self.__cInfo:
+			for p in self.__cInfo:
+				stream.append(head + ["setcinfo", self.__file, p, self.__cInfo[p]])
+
+		return stream
+		
@@ -21,11 +21,12 @@ __author__ = "Cyril Jaquier, Yaroslav Halchenko"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2013- Yaroslav Halchenko"
 __license__ = "GPL"

-from ..exceptions import UnknownJailException, DuplicateJailException
-from ..helpers import getLogger
+import logging
+
+from common.exceptions import UnknownJailException, DuplicateJailException

 # Gets the instance of the logger.
-logSys = getLogger(__name__)
+logSys = logging.getLogger("fail2ban.client.config")

 ##
 # Beautify the output of the client.
@@ -45,14 +46,12 @@ class Beautifier:
 		return self.__inputCmd
 		
 	def beautify(self, response):
-		logSys.debug("Beautify " + repr(response) + " with " + repr(self.__inputCmd))
+		logSys.debug("Beautify " + `response` + " with " + `self.__inputCmd`)
 		inC = self.__inputCmd
 		msg = response
 		try:
 			if inC[0] == "ping":
 				msg = "Server replied: " + response
-			elif inC[0] == "version":
-				msg = response
 			elif inC[0] == "start":
 				msg = "Jail started"
 			elif inC[0] == "stop":
@@ -68,23 +67,28 @@ class Beautifier:
 				msg = "logs: " + response
 			elif inC[0:1] == ['status']:
 				if len(inC) > 1:
+					# Create IP list
+					ipList = ""
+					for ip in response[1][1][2][1]:
+						ipList += ip + " "
+					# Creates file list.
+					fileList = ""
+					for f in response[0][1][2][1]:
+						fileList += f + " "
 					# Display information
-					msg = ["Status for the jail: %s" % inC[1]]
-					for n, res1 in enumerate(response):
-						prefix1 = "`-" if n == len(response) - 1 else "|-"
-						msg.append("%s %s" % (prefix1, res1[0]))
-						prefix1 = "   " if n == len(response) - 1 else "|  "
-						for m, res2 in enumerate(res1[1]):
-							prefix2 = prefix1 + ("`-" if m == len(res1[1]) - 1 else "|-")
-							val = " ".join(res2[1]) if isinstance(res2[1], list) else res2[1]
-							msg.append("%s %s:\t%s" % (prefix2, res2[0], val))
+					msg = "Status for the jail: " + inC[1] + "\n"
+					msg = msg + "|- " + response[0][0] + "\n"
+					msg = msg + "|  |- " + response[0][1][2][0] + ":\t" + fileList + "\n"
+					msg = msg + "|  |- " + response[0][1][0][0] + ":\t" + `response[0][1][0][1]` + "\n"
+					msg = msg + "|  `- " + response[0][1][1][0] + ":\t" + `response[0][1][1][1]` + "\n"
+					msg = msg + "`- " + response[1][0] + "\n"
+					msg = msg + "   |- " + response[1][1][0][0] + ":\t" + `response[1][1][0][1]` + "\n"
+					msg = msg + "   |  `- " + response[1][1][2][0] + ":\t" + ipList + "\n"
+					msg = msg + "   `- " + response[1][1][1][0] + ":\t" + `response[1][1][1][1]`
 				else:
-					msg = ["Status"]
-					for n, res1 in enumerate(response):
-						prefix1 = "`-" if n == len(response) - 1 else "|-"
-						val = " ".join(res1[1]) if isinstance(res1[1], list) else res1[1]
-						msg.append("%s %s:\t%s" % (prefix1, res1[0], val))
-				msg = "\n".join(msg)
+					msg = "Status\n"
+					msg = msg + "|- " + response[0][0] + ":\t" + `response[0][1]` + "\n"
+					msg = msg + "`- " + response[1][0] + ":\t\t" + response[1][1]
 			elif inC[1] == "logtarget":
 				msg = "Current logging target is:\n"
 				msg = msg + "`- " + response
@@ -99,19 +103,7 @@ class Beautifier:
 				elif response == 4:
 					msg = msg + "DEBUG"
 				else:
-					msg = msg + repr(response)
-			elif inC[1] == "dbfile":
-				if response is None:
-					msg = "Database currently disabled"
-				else:
-					msg = "Current database file is:\n"
-					msg = msg + "`- " + response
-			elif inC[1] == "dbpurgeage":
-				if response is None:
-					msg = "Database currently disabled"
-				else:
-					msg = "Current database purge age is:\n"
-					msg = msg + "`- %iseconds" % response
+					msg = msg + `response`
 			elif inC[2] in ("logpath", "addlogpath", "dellogpath"):
 				if len(response) == 0:
 					msg = "No file is currently monitored"
@@ -120,23 +112,6 @@ class Beautifier:
 					for path in response[:-1]:
 						msg = msg + "|- " + path + "\n"
 					msg = msg + "`- " + response[len(response)-1]
-			elif inC[2] == "logencoding":
-				msg = "Current log encoding is set to:\n"
-				msg = msg + response
-			elif inC[2] in ("journalmatch", "addjournalmatch", "deljournalmatch"):
-				if len(response) == 0:
-					msg = "No journal match filter set"
-				else:
-					msg = "Current match filter:\n"
-					msg += ' + '.join(" ".join(res) for res in response)
-			elif inC[2] == "datepattern":
-				msg = "Current date pattern set to: "
-				if response is None:
-					msg = msg + "Not set/required"
-				elif response[0] is None:
-					msg = msg + "%s" % response[1]
-				else:
-					msg = msg + "%s (%s)" % response
 			elif inC[2] in ("ignoreip", "addignoreip", "delignoreip"):
 				if len(response) == 0:
 					msg = "No IP address/network is ignored"
@@ -156,42 +131,20 @@ class Beautifier:
 						msg = msg + "|- [" + str(c) + "]: " + ip + "\n"
 						c += 1
 					msg = msg + "`- [" + str(c) + "]: " + response[len(response)-1]
-			elif inC[2] == "actions":
-				if len(response) == 0:
-					msg = "No actions for jail %s" % inC[1]
-				else:
-					msg = "The jail %s has the following actions:\n" % inC[1]
-					msg += ", ".join(response)
-			elif inC[2] == "actionproperties":
-				if len(response) == 0:
-					msg = "No properties for jail %s action %s" % (
-						inC[1], inC[3])
-				else:
-					msg = "The jail %s action %s has the following " \
-						"properties:\n" % (inC[1], inC[3])
-					msg += ", ".join(response)
-			elif inC[2] == "actionmethods":
-				if len(response) == 0:
-					msg = "No methods for jail %s action %s" % (
-						inC[1], inC[3])
-				else:
-					msg = "The jail %s action %s has the following " \
-						"methods:\n" % (inC[1], inC[3])
-					msg += ", ".join(response)
 		except Exception:
-			logSys.warning("Beautifier error. Please report the error")
-			logSys.error("Beautify " + repr(response) + " with " + repr(self.__inputCmd) +
+			logSys.warn("Beautifier error. Please report the error")
+			logSys.error("Beautify " + `response` + " with " + `self.__inputCmd` +
 						 " failed")
-			msg = msg + repr(response)
+			msg = msg + `response`
 		return msg

 	def beautifyError(self, response):
-		logSys.debug("Beautify (error) " + repr(response) + " with " + repr(self.__inputCmd))
+		logSys.debug("Beautify (error) " + `response` + " with " + `self.__inputCmd`)
 		msg = response
 		if isinstance(response, UnknownJailException):
-			msg = "Sorry but the jail '" + response.args[0] + "' does not exist"
+			msg = "Sorry but the jail '" + response[0] + "' does not exist"
 		elif isinstance(response, IndexError):
 			msg = "Sorry but the command is invalid"
 		elif isinstance(response, DuplicateJailException):
-			msg = "The jail '" + response.args[0] + "' already exists"
+			msg = "The jail '" + response[0] + "' already exists"
 		return msg
@@ -24,46 +24,11 @@ __author__ = 'Yaroslav Halhenko'
 __copyright__ = 'Copyright (c) 2007 Yaroslav Halchenko'
 __license__ = 'GPL'

-import os, sys
-from ..helpers import getLogger
-
-if sys.version_info >= (3,2): # pragma: no cover
-
-	# SafeConfigParser deprecated from Python 3.2 (renamed to ConfigParser)
-	from configparser import ConfigParser as SafeConfigParser, \
-		BasicInterpolation
-
-	# And interpolation of __name__ was simply removed, thus we need to
-	# decorate default interpolator to handle it
-	class BasicInterpolationWithName(BasicInterpolation):
-		"""Decorator to bring __name__ interpolation back.
-
-		Original handling of __name__ was removed because of
-		functional deficiencies: http://bugs.python.org/issue10489
-
-		commit v3.2a4-105-g61f2761
-		Author: Lukasz Langa <lukasz@langa.pl>
-		Date:	Sun Nov 21 13:41:35 2010 +0000
-
-		Issue #10489: removed broken `__name__` support from configparser
-
-		But should be fine to reincarnate for our use case
-		"""
-		def _interpolate_some(self, parser, option, accum, rest, section, map,
-							  depth):
-			if section and not (__name__ in map):
-				map = map.copy()		  # just to be safe
-				map['__name__'] = section
-			return super(BasicInterpolationWithName, self)._interpolate_some(
-				parser, option, accum, rest, section, map, depth)
-
-else: # pragma: no cover
-	from configparser import SafeConfigParser
+import logging, os
+from ConfigParser import SafeConfigParser

 # Gets the instance of the logger.
-logSys = getLogger(__name__)
-
-__all__ = ['SafeConfigParserWithIncludes']
+logSys = logging.getLogger("fail2ban.client.config")

 class SafeConfigParserWithIncludes(SafeConfigParser):
 	"""
@@ -96,15 +61,6 @@ after = 1.conf

 	SECTION_NAME = "INCLUDES"

-	if sys.version_info >= (3,2):
-		# overload constructor only for fancy new Python3's
-		def __init__(self, *args, **kwargs):
-			kwargs = kwargs.copy()
-			kwargs['interpolation'] = BasicInterpolationWithName()
-			kwargs['inline_comment_prefixes'] = ";"
-			super(SafeConfigParserWithIncludes, self).__init__(
-				*args, **kwargs)
-
 	#@staticmethod
 	def getIncludes(resource, seen = []):
 		"""
@@ -117,14 +73,7 @@ after = 1.conf
 		SCPWI = SafeConfigParserWithIncludes
 		
 		parser = SafeConfigParser()
-		try:
-			if sys.version_info >= (3,2): # pragma: no cover
-				parser.read(resource, encoding='utf-8')
-			else:
-				parser.read(resource)
-		except UnicodeDecodeError as e:
-			logSys.error("Error decoding config file '%s': %s" % (resource, e))
-			return []
+		parser.read(resource)
 		
 		resourceDir = os.path.dirname(resource)

@@ -155,8 +104,5 @@ after = 1.conf
 		for filename in filenames:
 			fileNamesFull += SafeConfigParserWithIncludes.getIncludes(filename)
 		logSys.debug("Reading files: %s" % fileNamesFull)
-		if sys.version_info >= (3,2): # pragma: no cover
-			return SafeConfigParser.read(self, fileNamesFull, encoding='utf-8')
-		else:
-			return SafeConfigParser.read(self, fileNamesFull)
+		return SafeConfigParser.read(self, fileNamesFull)

@@ -24,14 +24,12 @@ __author__ = "Cyril Jaquier"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"

-import glob, os
-from configparser import NoOptionError, NoSectionError
-
-from .configparserinc import SafeConfigParserWithIncludes
-from ..helpers import getLogger
+import glob, logging, os
+from configparserinc import SafeConfigParserWithIncludes
+from ConfigParser import NoOptionError, NoSectionError

 # Gets the instance of the logger.
-logSys = getLogger(__name__)
+logSys = logging.getLogger("fail2ban.client.config")

 class ConfigReader(SafeConfigParserWithIncludes):

@@ -55,7 +53,7 @@ class ConfigReader(SafeConfigParserWithIncludes):
 			raise ValueError("Base configuration directory %s does not exist "
 							  % self._basedir)
 		basename = os.path.join(self._basedir, filename)
-		logSys.info("Reading configs for %s under %s "  % (basename, self._basedir))
+		logSys.debug("Reading configs for %s under %s "  % (basename, self._basedir))
 		config_files = [ basename + ".conf" ]

 		# possible further customizations under a .conf.d directory
@@ -67,7 +65,7 @@ class ConfigReader(SafeConfigParserWithIncludes):
 		config_files += sorted(glob.glob('%s/*.local' % config_dir))

 		# choose only existing ones
-		config_files = list(filter(os.path.exists, config_files))
+		config_files = filter(os.path.exists, config_files)

 		if len(config_files):
 			# at least one config exists and accessible
@@ -111,71 +109,17 @@ class ConfigReader(SafeConfigParserWithIncludes):
 				if not pOptions is None and option[1] in pOptions:
 					continue
 				values[option[1]] = v
-			except NoSectionError as e:
+			except NoSectionError, e:
 				# No "Definition" section or wrong basedir
 				logSys.error(e)
-				values[option[1]] = option[2]
-				# TODO: validate error handling here.
+				return False
 			except NoOptionError:
 				if not option[2] is None:
-					logSys.warning("'%s' not defined in '%s'. Using default one: %r"
+					logSys.warn("'%s' not defined in '%s'. Using default one: %r"
 								% (option[1], sec, option[2]))
 					values[option[1]] = option[2]
-				else:
-					logSys.debug(
-						"Non essential option '%s' not defined in '%s'.",
-						option[1], sec)
 			except ValueError:
-				logSys.warning("Wrong value for '" + option[1] + "' in '" + sec +
-							"'. Using default one: '" + repr(option[2]) + "'")
+				logSys.warn("Wrong value for '" + option[1] + "' in '" + sec +
+							"'. Using default one: '" + `option[2]` + "'")
 				values[option[1]] = option[2]
 		return values
-
-class DefinitionInitConfigReader(ConfigReader):
-	"""Config reader for files with options grouped in [Definition] and
-       [Init] sections.
-
-       Is a base class for readers of filters and actions, where definitions
-       in jails might provide custom values for options defined in [Init]
-       section.
-       """
-
-	_configOpts = []
-	
-	def __init__(self, file_, jailName, initOpts, **kwargs):
-		ConfigReader.__init__(self, **kwargs)
-		self.setFile(file_)
-		self.setJailName(jailName)
-		self._initOpts = initOpts
-	
-	def setFile(self, fileName):
-		self._file = fileName
-		self._initOpts = {}
-	
-	def getFile(self):
-		return self._file
-	
-	def setJailName(self, jailName):
-		self._jailName = jailName
-	
-	def getJailName(self):
-		return self._jailName
-	
-	def read(self):
-		return ConfigReader.read(self, self._file)
-
-	# needed for fail2ban-regex that doesn't need fancy directories
-	def readexplicit(self):
-		return SafeConfigParserWithIncludes.read(self, self._file)
-	
-	def getOptions(self, pOpts):
-		self._opts = ConfigReader.getOptions(
-			self, "Definition", self._configOpts, pOpts)
-		
-		if self.has_section("Init"):
-			for opt in self.options("Init"):
-				if opt not in self._initOpts:
-					self._initOpts[opt] = self.get("Init", opt)
-	
-	def convert(self):
-		raise NotImplementedError
@@ -24,12 +24,13 @@ __author__ = "Cyril Jaquier"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"

-from .fail2banreader import Fail2banReader
-from .jailsreader import JailsReader
-from ..helpers import getLogger
+import logging
+from configreader import ConfigReader
+from fail2banreader import Fail2banReader
+from jailsreader import JailsReader

 # Gets the instance of the logger.
-logSys = getLogger(__name__)
+logSys = logging.getLogger("fail2ban.client.config")

 class Configurator:
 	
@@ -26,21 +26,11 @@ __license__ = "GPL"

 #from cPickle import dumps, loads, HIGHEST_PROTOCOL
 from pickle import dumps, loads, HIGHEST_PROTOCOL
-import socket, sys
-
-if sys.version_info >= (3,):
-	# b"" causes SyntaxError in python <= 2.5, so below implements equivalent
-	EMPTY_BYTES = bytes("", encoding="ascii")
-else:
-	# python 2.x, string type is equivalent to bytes.
-	EMPTY_BYTES = ""
+import socket

 class CSocket:
 	
-	if sys.version_info >= (3,):
-		END_STRING = bytes("<F2B_END_COMMAND>", encoding='ascii')
-	else:
-		END_STRING = "<F2B_END_COMMAND>"
+	END_STRING = "<F2B_END_COMMAND>"
 	
 	def __init__(self, sock = "/var/run/fail2ban/fail2ban.sock"):
 		# Create an INET, STREAMing socket
@@ -59,11 +49,11 @@ class CSocket:
 	
 	#@staticmethod
 	def receive(sock):
-		msg = EMPTY_BYTES
+		msg = ''
 		while msg.rfind(CSocket.END_STRING) == -1:
 			chunk = sock.recv(6)
 			if chunk == '':
-				raise RuntimeError("socket connection broken")
+				raise RuntimeError, "socket connection broken"
 			msg = msg + chunk
 		return loads(msg)
 	receive = staticmethod(receive)
@@ -24,11 +24,11 @@ __author__ = "Cyril Jaquier"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"

-from .configreader import ConfigReader
-from ..helpers import getLogger
+import logging
+from configreader import ConfigReader

 # Gets the instance of the logger.
-logSys = getLogger(__name__)
+logSys = logging.getLogger("fail2ban.client.config")

 class Fail2banReader(ConfigReader):
 	
@@ -44,10 +44,8 @@ class Fail2banReader(ConfigReader):
 		return ConfigReader.getOptions(self, "Definition", opts)
 	
 	def getOptions(self):
-		opts = [["string", "loglevel", "INFO" ],
-				["string", "logtarget", "STDERR"],
-				["string", "dbfile", "/var/lib/fail2ban/fail2ban.sqlite3"],
-				["int", "dbpurgeage", 86400]]
+		opts = [["int", "loglevel", 1],
+				["string", "logtarget", "STDERR"]]
 		self.__opts = ConfigReader.getOptions(self, "Definition", opts)
 	
 	def convert(self):
@@ -57,10 +55,5 @@ class Fail2banReader(ConfigReader):
 				stream.append(["set", "loglevel", self.__opts[opt]])
 			elif opt == "logtarget":
 				stream.append(["set", "logtarget", self.__opts[opt]])
-			elif opt == "dbfile":
-				stream.append(["set", "dbfile", self.__opts[opt]])
-			elif opt == "dbpurgeage":
-				stream.append(["set", "dbpurgeage", self.__opts[opt]])
-		# Ensure logtarget/level set first so any db errors are captured
-		return sorted(stream, reverse=True)
+		return stream
 	
@@ -0,0 +1,79 @@
+# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
+# vi: set ft=python sts=4 ts=4 sw=4 noet :
+
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+# Author: Cyril Jaquier
+# 
+
+__author__ = "Cyril Jaquier"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
+__license__ = "GPL"
+
+import os
+import logging
+from configreader import ConfigReader
+
+# Gets the instance of the logger.
+logSys = logging.getLogger("fail2ban.client.config")
+
+class FilterReader(ConfigReader):
+	
+	def __init__(self, fileName, name, **kwargs):
+		ConfigReader.__init__(self, **kwargs)
+		# Defer initialization to the set Methods
+		self.__file = self.__name = self.__opts = None
+		self.setFile(fileName)
+		self.setName(name)
+	
+	def setFile(self, fileName):
+		self.__file = fileName
+		self.__opts = None
+	
+	def getFile(self):
+		return self.__file
+	
+	def setName(self, name):
+		self.__name = name
+
+	def getName(self):
+		return self.__name
+	
+	def read(self):
+		return ConfigReader.read(self, os.path.join("filter.d", self.__file))
+	
+	def getOptions(self, pOpts):
+		opts = [["string", "ignoreregex", ""],
+				["string", "failregex", ""],
+				]
+		self.__opts = ConfigReader.getOptions(self, "Definition", opts, pOpts)
+	
+	def convert(self):
+		stream = list()
+		for opt in self.__opts:
+			if opt == "failregex":
+				for regex in self.__opts[opt].split('\n'):
+					# Do not send a command if the rule is empty.
+					if regex != '':
+						stream.append(["set", self.__name, "addfailregex", regex])
+			elif opt == "ignoreregex":
+				for regex in self.__opts[opt].split('\n'):
+					# Do not send a command if the rule is empty.
+					if regex != '':
+						stream.append(["set", self.__name, "addignoreregex", regex])		
+		return stream
+		
@@ -24,22 +24,18 @@ __author__ = "Cyril Jaquier"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"

-import re, glob, os.path
-import json
+import logging, re, glob, os.path

-from .configreader import ConfigReader
-from .filterreader import FilterReader
-from .actionreader import ActionReader
-from ..helpers import getLogger
+from configreader import ConfigReader
+from filterreader import FilterReader
+from actionreader import ActionReader

 # Gets the instance of the logger.
-logSys = getLogger(__name__)
+logSys = logging.getLogger("fail2ban.client.config")

 class JailReader(ConfigReader):
 	
-	optionCRE = re.compile("^((?:\w|-|_|\.)+)(?:\[(.*)\])?$")
-	optionExtractRE = re.compile(
-		r'([\w\-_\.]+)=(?:"([^"]*)"|\'([^\']*)\'|([^,]*))(?:,|$)')
+	actionCRE = re.compile("^([\w_.-]+)(?:\[(.*)\])?$")
 	
 	def __init__(self, name, force_enable=False, **kwargs):
 		ConfigReader.__init__(self, **kwargs)
@@ -49,8 +45,7 @@ class JailReader(ConfigReader):
 		self.__actions = list()
 		self.__opts = None
 	
-	@property
-	def options(self):
+	def getRawOptions(self):
 		return self.__opts

 	def setName(self, value):
@@ -60,17 +55,10 @@ class JailReader(ConfigReader):
 		return self.__name
 	
 	def read(self):
-		out = ConfigReader.read(self, "jail")
-		# Before returning -- verify that requested section
-		# exists at all
-		if not (self.__name in self.sections()):
-			raise ValueError("Jail %r was not found among available"
-							 % self.__name)
-		return out
+		return ConfigReader.read(self, "jail")
 	
 	def isEnabled(self):
-		return self.__force_enable or (
-			self.__opts and self.__opts.get("enabled", False))
+		return self.__force_enable or ( self.__opts and self.__opts["enabled"] )

 	@staticmethod
 	def _glob(path):
@@ -87,14 +75,13 @@ class JailReader(ConfigReader):
 		return pathList

 	def getOptions(self):
-		opts = [["bool", "enabled", False],
-				["string", "logpath", None],
-				["string", "logencoding", None],
+		opts = [["bool", "enabled", "false"],
+				["string", "logpath", "/var/log/messages"],
 				["string", "backend", "auto"],
-				["int", "maxretry", None],
-				["int", "findtime", None],
-				["int", "bantime", None],
-				["string", "usedns", None],
+				["int", "maxretry", 3],
+				["int", "findtime", 600],
+				["int", "bantime", 600],
+				["string", "usedns", "warn"],
 				["string", "failregex", None],
 				["string", "ignoreregex", None],
 				["string", "ignorecommand", None],
@@ -108,10 +95,8 @@ class JailReader(ConfigReader):
 		if self.isEnabled():
 			# Read filter
 			if self.__opts["filter"]:
-				filterName, filterOpt = JailReader.extractOptions(
-					self.__opts["filter"])
-				self.__filter = FilterReader(
-					filterName, self.__name, filterOpt, basedir=self.getBaseDir())
+				self.__filter = FilterReader(self.__opts["filter"], self.__name,
+											 basedir=self.getBaseDir())
 				ret = self.__filter.read()
 				if ret:
 					self.__filter.getOptions(self.__opts)
@@ -120,40 +105,27 @@ class JailReader(ConfigReader):
 					return False
 			else:
 				self.__filter = None
-				logSys.warning("No filter set for jail %s" % self.__name)
+				logSys.warn("No filter set for jail %s" % self.__name)
 		
 			# Read action
 			for act in self.__opts["action"].split('\n'):
 				try:
 					if not act:			  # skip empty actions
 						continue
-					actName, actOpt = JailReader.extractOptions(act)
-					if actName.endswith(".py"):
-						self.__actions.append([
-							"set",
-							self.__name,
-							"addaction",
-							actOpt.pop("actname", os.path.splitext(actName)[0]),
-							os.path.join(
-								self.getBaseDir(), "action.d", actName),
-							json.dumps(actOpt),
-							])
+					splitAct = JailReader.splitAction(act)
+					action = ActionReader(splitAct, self.__name, basedir=self.getBaseDir())
+					ret = action.read()
+					if ret:
+						action.getOptions(self.__opts)
+						self.__actions.append(action)
 					else:
-						action = ActionReader(
-							actName, self.__name, actOpt,
-							basedir=self.getBaseDir())
-						ret = action.read()
-						if ret:
-							action.getOptions(self.__opts)
-							self.__actions.append(action)
-						else:
-							raise AttributeError("Unable to read action")
-				except Exception as e:
+						raise AttributeError("Unable to read action")
+				except Exception, e:
 					logSys.error("Error in action definition " + act)
 					logSys.debug("Caught exception: %s" % (e,))
 					return False
 			if not len(self.__actions):
-				logSys.warning("No actions were defined for %s" % self.__name)
+				logSys.warn("No actions were defined for %s" % self.__name)
 		return True
 	
 	def convert(self, allow_no_files=False):
@@ -168,24 +140,18 @@ class JailReader(ConfigReader):

 		stream = []
 		for opt in self.__opts:
-			if opt == "logpath" and	\
-					self.__opts.get('backend', None) != "systemd":
+			if opt == "logpath":
 				found_files = 0
 				for path in self.__opts[opt].split("\n"):
-					path = path.rsplit(" ", 1)
-					path, tail = path if len(path) > 1 else (path[0], "head")
 					pathList = JailReader._glob(path)
 					if len(pathList) == 0:
 						logSys.error("No file(s) found for glob %s" % path)
 					for p in pathList:
 						found_files += 1
-						stream.append(
-							["set", self.__name, "addlogpath", p, tail])
+						stream.append(["set", self.__name, "addlogpath", p])
 				if not (found_files or allow_no_files):
 					raise ValueError(
 						"Have not found any log file for %s jail" % self.__name)
-			elif opt == "logencoding":
-				stream.append(["set", self.__name, "logencoding", self.__opts[opt]])
 			elif opt == "backend":
 				backend = self.__opts[opt]
 			elif opt == "maxretry":
@@ -213,26 +179,56 @@ class JailReader(ConfigReader):
 		if self.__filter:
 			stream.extend(self.__filter.convert())
 		for action in self.__actions:
-			if isinstance(action, ConfigReader):
-				stream.extend(action.convert())
-			else:
-				stream.append(action)
+			stream.extend(action.convert())
 		stream.insert(0, ["add", self.__name, backend])
 		return stream
 	
 	#@staticmethod
-	def extractOptions(option):
-		match = JailReader.optionCRE.match(option)
-		if not match:
-			# TODO proper error handling
-			return None, None
-		option_name, optstr = match.groups()
-		option_opts = dict()
-		if optstr:
-			for optmatch in JailReader.optionExtractRE.finditer(optstr):
-				opt = optmatch.group(1)
-				value = [
-					val for val in optmatch.group(2,3,4) if val is not None][0]
-				option_opts[opt.strip()] = value.strip()
-		return option_name, option_opts
-	extractOptions = staticmethod(extractOptions)
+	def splitAction(action):
+		m = JailReader.actionCRE.match(action)
+		d = dict()
+		try:
+			mgroups = m.groups()
+		except AttributeError:
+			raise ValueError("While reading action %s we should have got 1 or "
+							 "2 groups. Got: 0" % action)
+		if len(mgroups) == 2:
+			action_name, action_opts = mgroups
+		elif len(mgroups) == 1: # pragma: nocover - unreachable - .* on second group always matches
+			action_name, action_opts = mgroups[0], None
+		else: # pragma: nocover - unreachable - regex only can capture 2 groups
+			raise ValueError("While reading action %s we should have got up to "
+							 "2 groups. Got: %r" % (action, mgroups))
+		if not action_opts is None:
+			# Huge bad hack :( This method really sucks. TODO Reimplement it.
+			actions = ""
+			escapeChar = None
+			allowComma = False
+			for c in action_opts:
+				if c in ('"', "'") and not allowComma:
+					# Start
+					escapeChar = c
+					allowComma = True
+				elif c == escapeChar:
+					# End
+					escapeChar = None
+					allowComma = False
+				else:
+					if c == ',' and allowComma:
+						actions += "<COMMA>"
+					else:
+						actions += c
+			
+			# Split using ,
+			actionsSplit = actions.split(',')
+			# Replace the tag <COMMA> with ,
+			actionsSplit = [n.replace("<COMMA>", ',') for n in actionsSplit]
+			
+			for param in actionsSplit:
+				p = param.split('=')
+				try:
+					d[p[0].strip()] = p[1].strip()
+				except IndexError:
+					logSys.error("Invalid argument %s in '%s'" % (p, action_opts))
+		return [action_name, d]
+	splitAction = staticmethod(splitAction)
@@ -24,12 +24,12 @@ __author__ = "Cyril Jaquier"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"

-from .configreader import ConfigReader
-from .jailreader import JailReader
-from ..helpers import getLogger
+import logging
+from configreader import ConfigReader
+from jailreader import JailReader

 # Gets the instance of the logger.
-logSys = getLogger(__name__)
+logSys = logging.getLogger("fail2ban.client.config")

 class JailsReader(ConfigReader):

@@ -45,8 +45,7 @@ class JailsReader(ConfigReader):
 		self.__jails = list()
 		self.__force_enable = force_enable

-	@property
-	def jails(self):
+	def getJails(self):
 		return self.__jails

 	def read(self):
@@ -66,8 +65,6 @@ class JailsReader(ConfigReader):
 		# Get the options of all jails.
 		parse_status = True
 		for sec in sections:
-			if sec == 'INCLUDES':
-				continue
 			jail = JailReader(sec, basedir=self.getBaseDir(),
 							  force_enable=self.__force_enable)
 			jail.read()
@@ -17,6 +17,14 @@
 # along with Fail2Ban; if not, write to the Free Software
 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.

-__author__ = "Steven Hiscocks"
-__copyright__ = "Copyright (c) 2014 Steven Hiscocks"
+# Author: Cyril Jaquier
+# 
+
+__author__ = "Cyril Jaquier"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"
+
+import logging
+
+# Custom debug level
+logging.HEAVYDEBUG = 5
@@ -29,7 +29,7 @@ __license__ = "GPL"
 class DuplicateJailException(Exception):
 	pass

-class UnknownJailException(KeyError):
+class UnknownJailException(Exception):
 	pass


@@ -0,0 +1,28 @@
+# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
+# vi: set ft=python sts=4 ts=4 sw=4 noet :
+
+# This file is part of Fail2Ban.
+#
+# Fail2Ban is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Fail2Ban is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Fail2Ban; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+__author__ = "Cyril Jaquier, Arturo 'Buanzo' Busleiman, Yaroslav Halchenko"
+__license__ = "GPL"
+
+
+def formatExceptionInfo():
+	""" Consistently format exception information """
+	import sys
+	cla, exc = sys.exc_info()[:2]
+	return (cla.__name__, str(exc))
@@ -38,18 +38,12 @@ protocol = [
 ["status", "gets the current status of the server"], 
 ["ping", "tests if the server is alive"], 
 ["help", "return this output"], 
-["version", "return the server version"],
 ['', "LOGGING", ""],
-["set loglevel <LEVEL>", "sets logging level to <LEVEL>. Levels: CRITICAL, ERROR, WARNING, NOTICE, INFO, DEBUG"], 
+["set loglevel <LEVEL>", "sets logging level to <LEVEL>. 0 is minimal, 4 is debug"], 
 ["get loglevel", "gets the logging level"], 
 ["set logtarget <TARGET>", "sets logging target to <TARGET>. Can be STDOUT, STDERR, SYSLOG or a file"], 
 ["get logtarget", "gets logging target"], 
 ["flushlogs", "flushes the logtarget if a file and reopens it. For log rotation."], 
-['', "DATABASE", ""],
-["set dbfile <FILE>", "set the location of fail2ban persistent datastore. Set to \"None\" to disable"], 
-["get dbfile", "get the location of fail2ban persistent datastore"], 
-["set dbpurgeage <SECONDS>", "sets the max age in <SECONDS> that history of bans will be kept"], 
-["get dbpurgeage", "gets the max age in seconds that history of bans will be kept"], 
 ['', "JAIL CONTROL", ""],
 ["add <JAIL> <BACKEND>", "creates <JAIL> using <BACKEND>"], 
 ["start <JAIL>", "starts the jail <JAIL>"], 
@@ -59,11 +53,8 @@ protocol = [
 ["set <JAIL> idle on|off", "sets the idle state of <JAIL>"], 
 ["set <JAIL> addignoreip <IP>", "adds <IP> to the ignore list of <JAIL>"], 
 ["set <JAIL> delignoreip <IP>", "removes <IP> from the ignore list of <JAIL>"], 
-["set <JAIL> addlogpath <FILE> ['tail']", "adds <FILE> to the monitoring list of <JAIL>, optionally starting at the 'tail' of the file (default 'head')."], 
+["set <JAIL> addlogpath <FILE>", "adds <FILE> to the monitoring list of <JAIL>"], 
 ["set <JAIL> dellogpath <FILE>", "removes <FILE> from the monitoring list of <JAIL>"],
-["set <JAIL> logencoding <ENCODING>", "sets the <ENCODING> of the log files for <JAIL>"],
-["set <JAIL> addjournalmatch <MATCH>", "adds <MATCH> to the journal filter of <JAIL>"],
-["set <JAIL> deljournalmatch <MATCH>", "removes <MATCH> from the journal filter of <JAIL>"],
 ["set <JAIL> addfailregex <REGEX>", "adds the regular expression <REGEX> which must match failures for <JAIL>"], 
 ["set <JAIL> delfailregex <INDEX>", "removes the regular expression at <INDEX> for failregex"], 
 ["set <JAIL> ignorecommand <VALUE>", "sets ignorecommand of <JAIL>"],
@@ -71,50 +62,36 @@ protocol = [
 ["set <JAIL> delignoreregex <INDEX>", "removes the regular expression at <INDEX> for ignoreregex"], 
 ["set <JAIL> findtime <TIME>", "sets the number of seconds <TIME> for which the filter will look back for <JAIL>"], 
 ["set <JAIL> bantime <TIME>", "sets the number of seconds <TIME> a host will be banned for <JAIL>"], 
-["set <JAIL> datepattern <PATTERN>", "sets the <PATTERN> used to match date/times for <JAIL>"],
 ["set <JAIL> usedns <VALUE>", "sets the usedns mode for <JAIL>"],
 ["set <JAIL> banip <IP>", "manually Ban <IP> for <JAIL>"], 
 ["set <JAIL> unbanip <IP>", "manually Unban <IP> in <JAIL>"], 
 ["set <JAIL> maxretry <RETRY>", "sets the number of failures <RETRY> before banning the host for <JAIL>"], 
-["set <JAIL> maxlines <LINES>", "sets the number of <LINES> to buffer for regex search for <JAIL>"], 
-["set <JAIL> addaction <ACT>[ <PYTHONFILE> <JSONKWARGS>]", "adds a new action named <NAME> for <JAIL>. Optionally for a Python based action, a <PYTHONFILE> and <JSONKWARGS> can be specified, else will be a Command Action"], 
-["set <JAIL> delaction <ACT>", "removes the action <ACT> from <JAIL>"], 
-["", "COMMAND ACTION CONFIGURATION", ""],
-["set <JAIL> action <ACT> actionstart <CMD>", "sets the start command <CMD> of the action <ACT> for <JAIL>"], 
-["set <JAIL> action <ACT> actionstop <CMD>", "sets the stop command <CMD> of the action <ACT> for <JAIL>"], 
-["set <JAIL> action <ACT> actioncheck <CMD>", "sets the check command <CMD> of the action <ACT> for <JAIL>"], 
-["set <JAIL> action <ACT> actionban <CMD>", "sets the ban command <CMD> of the action <ACT> for <JAIL>"],
-["set <JAIL> action <ACT> actionunban <CMD>", "sets the unban command <CMD> of the action <ACT> for <JAIL>"], 
-["set <JAIL> action <ACT> timeout <TIMEOUT>", "sets <TIMEOUT> as the command timeout in seconds for the action <ACT> for <JAIL>"],
-["", "GENERAL ACTION CONFIGURATION", ""],
-["set <JAIL> action <ACT> <PROPERTY> <VALUE>", "sets the <VALUE> of <PROPERTY> for the action <ACT> for <JAIL>"],
-["set <JAIL> action <ACT> <METHOD>[ <JSONKWARGS>]", "calls the <METHOD> with <JSONKWARGS> for the action <ACT> for <JAIL>"],
+["set <JAIL> addaction <ACT>", "adds a new action named <NAME> for <JAIL>"], 
+["set <JAIL> delaction <ACT>", "removes the action <NAME> from <JAIL>"], 
+["set <JAIL> setcinfo <ACT> <KEY> <VALUE>", "sets <VALUE> for <KEY> of the action <NAME> for <JAIL>"], 
+["set <JAIL> delcinfo <ACT> <KEY>", "removes <KEY> for the action <NAME> for <JAIL>"], 
+["set <JAIL> actionstart <ACT> <CMD>", "sets the start command <CMD> of the action <ACT> for <JAIL>"], 
+["set <JAIL> actionstop <ACT> <CMD>", "sets the stop command <CMD> of the action <ACT> for <JAIL>"], 
+["set <JAIL> actioncheck <ACT> <CMD>", "sets the check command <CMD> of the action <ACT> for <JAIL>"], 
+["set <JAIL> actionban <ACT> <CMD>", "sets the ban command <CMD> of the action <ACT> for <JAIL>"],
+["set <JAIL> actionunban <ACT> <CMD>", "sets the unban command <CMD> of the action <ACT> for <JAIL>"], 
 ['', "JAIL INFORMATION", ""],
 ["get <JAIL> logpath", "gets the list of the monitored files for <JAIL>"],
-["get <JAIL> logencoding", "gets the encoding of the log files for <JAIL>"],
-["get <JAIL> journalmatch", "gets the journal filter match for <JAIL>"],
 ["get <JAIL> ignoreip", "gets the list of ignored IP addresses for <JAIL>"],
 ["get <JAIL> ignorecommand", "gets ignorecommand of <JAIL>"],
 ["get <JAIL> failregex", "gets the list of regular expressions which matches the failures for <JAIL>"],
 ["get <JAIL> ignoreregex", "gets the list of regular expressions which matches patterns to ignore for <JAIL>"],
 ["get <JAIL> findtime", "gets the time for which the filter will look back for failures for <JAIL>"],
 ["get <JAIL> bantime", "gets the time a host is banned for <JAIL>"],
-["get <JAIL> datepattern", "gets the patern used to match date/times for <JAIL>"],
 ["get <JAIL> usedns", "gets the usedns setting for <JAIL>"],
 ["get <JAIL> maxretry", "gets the number of failures allowed for <JAIL>"],
-["get <JAIL> maxlines", "gets the number of lines to buffer for <JAIL>"],
-["get <JAIL> actions", "gets a list of actions for <JAIL>"],
-["", "COMMAND ACTION INFORMATION",""],
-["get <JAIL> action <ACT> actionstart", "gets the start command for the action <ACT> for <JAIL>"],
-["get <JAIL> action <ACT> actionstop", "gets the stop command for the action <ACT> for <JAIL>"],
-["get <JAIL> action <ACT> actioncheck", "gets the check command for the action <ACT> for <JAIL>"],
-["get <JAIL> action <ACT> actionban", "gets the ban command for the action <ACT> for <JAIL>"],
-["get <JAIL> action <ACT> actionunban", "gets the unban command for the action <ACT> for <JAIL>"],
-["get <JAIL> action <ACT> timeout", "gets the command timeout in seconds for the action <ACT> for <JAIL>"],
-["", "GENERAL ACTION INFORMATION", ""],
-["get <JAIL> actionproperties <ACT>", "gets a list of properties for the action <ACT> for <JAIL>"],
-["get <JAIL> actionmethods <ACT>", "gets a list of methods for the action <ACT> for <JAIL>"],
-["get <JAIL> action <ACT> <PROPERTY>", "gets the value of <PROPERTY> for the action <ACT> for <JAIL>"],
+["get <JAIL> addaction", "gets the last action which has been added for <JAIL>"],
+["get <JAIL> actionstart <ACT>", "gets the start command for the action <ACT> for <JAIL>"],
+["get <JAIL> actionstop <ACT>", "gets the stop command for the action <ACT> for <JAIL>"],
+["get <JAIL> actioncheck <ACT>", "gets the check command for the action <ACT> for <JAIL>"],
+["get <JAIL> actionban <ACT>", "gets the ban command for the action <ACT> for <JAIL>"],
+["get <JAIL> actionunban <ACT>", "gets the unban command for the action <ACT> for <JAIL>"],
+["get <JAIL> cinfo <ACT> <KEY>", "gets the value for <KEY> for the action <ACT> for <JAIL>"],
 ]

 ##
@@ -128,18 +105,16 @@ def printFormatted():
 	firstHeading = False
 	for m in protocol:
 		if m[0] == '' and firstHeading:
-			print()
+			print
 		firstHeading = True
 		first = True
-		if len(m[0]) >= MARGIN:
-			m[1] = ' ' * WIDTH + m[1]
-		for n in textwrap.wrap(m[1], WIDTH, drop_whitespace=False):
+		for n in textwrap.wrap(m[1], WIDTH):
 			if first:
-				line = ' ' * INDENT + m[0] + ' ' * (MARGIN - len(m[0])) + n.strip()
+				line = ' ' * INDENT + m[0] + ' ' * (MARGIN - len(m[0])) + n
 				first = False
 			else:
-				line = ' ' * (INDENT + MARGIN) + n.strip()
-			print(line)
+				line = ' ' * (INDENT + MARGIN) + n
+			print line

 ##
 # Prints the protocol in a "mediawiki" format.
@@ -149,19 +124,19 @@ def printWiki():
 	for m in protocol:
 		if m[0] == '':
 			if firstHeading:
-				print("|}")
+				print "|}"
 			__printWikiHeader(m[1], m[2])
 			firstHeading = True
 		else:
-			print("|-")
-			print("| <span style=\"white-space:nowrap;\"><tt>" + m[0] + "</tt></span> || || " + m[1])
-	print("|}")
+			print "|-"
+			print "| <span style=\"white-space:nowrap;\"><tt>" + m[0] + "</tt></span> || || " + m[1]
+	print "|}"

 def __printWikiHeader(section, desc):
-	print()
-	print("=== " + section + " ===")
-	print()
-	print(desc)
-	print()
-	print("{|")
-	print("| '''Command''' || || '''Description'''")
+	print
+	print "=== " + section + " ==="
+	print
+	print desc
+	print
+	print "{|"
+	print "| '''Command''' || || '''Description'''"
@@ -20,8 +20,8 @@
 # Author: Cyril Jaquier
 #

-__author__ = "Cyril Jaquier, Yaroslav Halchenko, Steven Hiscocks, Daniel Black"
-__copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2011-2014 Yaroslav Halchenko, 2013-2013 Steven Hiscocks, Daniel Black"
-__license__ = "GPL-v2+"
+__author__ = "Cyril Jaquier, Yaroslav Halchenko"
+__copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2011-2013 Yaroslav Halchenko"
+__license__ = "GPL"

-version = "0.9.0.dev"
+version = "0.8.14"
@@ -1,363 +0,0 @@
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-
-# This file is part of Fail2Ban.
-#
-# Fail2Ban is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Fail2Ban is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-
-import sys
-if sys.version_info < (2, 7):
-	raise ImportError("badips.py action requires Python >= 2.7")
-import json
-from functools import partial
-import threading
-import logging
-if sys.version_info >= (3, ):
-	from urllib.request import Request, urlopen
-	from urllib.parse import urlencode
-	from urllib.error import HTTPError
-else:
-	from urllib2 import Request, urlopen, HTTPError
-	from urllib import urlencode
-
-from fail2ban.server.actions import ActionBase
-from fail2ban.version import version as f2bVersion
-
-class BadIPsAction(ActionBase):
-	"""Fail2Ban action which reports bans to badips.com, and also
-	blacklist bad IPs listed on badips.com by using another action's
-	ban method.
-
-	Parameters
-	----------
-	jail : Jail
-		The jail which the action belongs to.
-	name : str
-		Name assigned to the action.
-	category : str
-		Valid badips.com category for reporting failures.
-	score : int, optional
-		Minimum score for bad IPs. Default 3.
-	age : str, optional
-		Age of last report for bad IPs, per badips.com syntax.
-		Default "24h" (24 hours)
-	key : str, optional
-		Key issued by badips.com to report bans, for later retrieval
-		of personalised content.
-	banaction : str, optional
-		Name of banaction to use for blacklisting bad IPs. If `None`,
-		no blacklist of IPs will take place.
-		Default `None`.
-	bancategory : str, optional
-		Name of category to use for blacklisting, which can differ
-		from category used for reporting. e.g. may want to report
-		"postfix", but want to use whole "mail" category for blacklist.
-		Default `category`.
-	bankey : str, optional
-		Key issued by badips.com to blacklist IPs reported with the
-		associated key.
-	updateperiod : int, optional
-		Time in seconds between updating bad IPs blacklist.
-		Default 900 (15 minutes)
-
-	Raises
-	------
-	ValueError
-		If invalid `category`, `score`, `banaction` or `updateperiod`.
-	"""
-
-	_badips = "http://www.badips.com"
-	_Request = partial(
-		Request, headers={'User-Agent': "Fail2Ban %s" % f2bVersion})
-
-	def __init__(self, jail, name, category, score=3, age="24h", key=None,
-		banaction=None, bancategory=None, bankey=None, updateperiod=900):
-		super(BadIPsAction, self).__init__(jail, name)
-
-		self.category = category
-		self.score = score
-		self.age = age
-		self.key = key
-		self.banaction = banaction
-		self.bancategory = bancategory or category
-		self.bankey = bankey
-		self.updateperiod = updateperiod
-
-		self._bannedips = set()
-		# Used later for threading.Timer for updating badips
-		self._timer = None
-
-	def getCategories(self, incParents=False):
-		"""Get badips.com categories.
-
-		Returns
-		-------
-		set
-			Set of categories.
-
-		Raises
-		------
-		HTTPError
-			Any issues with badips.com request.
-		"""
-		try:
-			response = urlopen(
-				self._Request("/".join([self._badips, "get", "categories"])))
-		except HTTPError as response:
-			messages = json.loads(response.read().decode('utf-8'))
-			self._logSys.error(
-				"Failed to fetch categories. badips.com response: '%s'",
-				messages['err'])
-			raise
-		else:
-			categories = json.loads(response.read().decode('utf-8'))['categories']
-			categories_names = set(
-				value['Name'] for value in categories)
-			if incParents:
-				categories_names.update(set(
-					value['Parent'] for value in categories
-					if "Parent" in value))
-			return categories_names
-
-	def getList(self, category, score, age, key=None):
-		"""Get badips.com list of bad IPs.
-
-		Parameters
-		----------
-		category : str
-			Valid badips.com category.
-		score : int
-			Minimum score for bad IPs.
-		age : str
-			Age of last report for bad IPs, per badips.com syntax.
-		key : str, optional
-			Key issued by badips.com to fetch IPs reported with the
-			associated key.
-
-		Returns
-		-------
-		set
-			Set of bad IPs.
-
-		Raises
-		------
-		HTTPError
-			Any issues with badips.com request.
-		"""
-		try:
-			url = "?".join([
-				"/".join([self._badips, "get", "list", category, str(score)]),
-				urlencode({'age': age})])
-			if key:
-				url = "&".join([url, urlencode({'key': key})])
-			response = urlopen(self._Request(url))
-		except HTTPError as response:
-			messages = json.loads(response.read().decode('utf-8'))
-			self._logSys.error(
-				"Failed to fetch bad IP list. badips.com response: '%s'",
-				messages['err'])
-			raise
-		else:
-			return set(response.read().decode('utf-8').split())
-
-	@property
-	def category(self):
-		"""badips.com category for reporting IPs.
-		"""
-		return self._category
-
-	@category.setter
-	def category(self, category):
-		if category not in self.getCategories():
-			self._logSys.error("Category name '%s' not valid. "
-				"see badips.com for list of valid categories",
-				category)
-			raise ValueError("Invalid category: %s" % category)
-		self._category = category
-
-	@property
-	def bancategory(self):
-		"""badips.com bancategory for fetching IPs.
-		"""
-		return self._bancategory
-
-	@bancategory.setter
-	def bancategory(self, bancategory):
-		if bancategory not in self.getCategories(incParents=True):
-			self._logSys.error("Category name '%s' not valid. "
-				"see badips.com for list of valid categories",
-				bancategory)
-			raise ValueError("Invalid bancategory: %s" % bancategory)
-		self._bancategory = bancategory
-
-	@property
-	def score(self):
-		"""badips.com minimum score for fetching IPs.
-		"""
-		return self._score
-
-	@score.setter
-	def score(self, score):
-		score = int(score)
-		if 0 <= score <= 5:
-			self._score = score
-		else:
-			raise ValueError("Score must be 0-5")
-
-	@property
-	def banaction(self):
-		"""Jail action to use for banning/unbanning.
-		"""
-		return self._banaction
-
-	@banaction.setter
-	def banaction(self, banaction):
-		if banaction is not None and banaction not in self._jail.actions:
-			self._logSys.error("Action name '%s' not in jail '%s'",
-				banaction, self._jail.name)
-			raise ValueError("Invalid banaction")
-		self._banaction = banaction
-
-	@property
-	def updateperiod(self):
-		"""Period in seconds between banned bad IPs will be updated.
-		"""
-		return self._updateperiod
-
-	@updateperiod.setter
-	def updateperiod(self, updateperiod):
-		updateperiod = int(updateperiod)
-		if updateperiod > 0:
-			self._updateperiod = updateperiod
-		else:
-			raise ValueError("Update period must be integer greater than 0")
-
-	def _banIPs(self, ips):
-		for ip in ips:
-			try:
-				self._jail.actions[self.banaction].ban({
-					'ip': ip,
-					'failures': 0,
-					'matches': "",
-					'ipmatches': "",
-					'ipjailmatches': "",
-				})
-			except Exception as e:
-				self._logSys.error(
-					"Error banning IP %s for jail '%s' with action '%s': %s",
-					ip, self._jail.name, self.banaction, e,
-					exc_info=self._logSys.getEffectiveLevel()<=logging.DEBUG)
-			else:
-				self._bannedips.add(ip)
-				self._logSys.info(
-					"Banned IP %s for jail '%s' with action '%s'",
-					ip, self._jail.name, self.banaction)
-
-	def _unbanIPs(self, ips):
-		for ip in ips:
-			try:
-				self._jail.actions[self.banaction].unban({
-					'ip': ip,
-					'failures': 0,
-					'matches': "",
-					'ipmatches': "",
-					'ipjailmatches': "",
-				})
-			except Exception as e:
-				self._logSys.info(
-					"Error unbanning IP %s for jail '%s' with action '%s': %s",
-					ip, self._jail.name, self.banaction, e,
-					exc_info=self._logSys.getEffectiveLevel()<=logging.DEBUG)
-			else:
-				self._logSys.info(
-					"Unbanned IP %s for jail '%s' with action '%s'",
-					ip, self._jail.name, self.banaction)
-			finally:
-				self._bannedips.remove(ip)
-
-	def start(self):
-		"""If `banaction` set, blacklists bad IPs.
-		"""
-		if self.banaction is not None:
-			self.update()
-
-	def update(self):
-		"""If `banaction` set, updates blacklisted IPs.
-
-		Queries badips.com for list of bad IPs, removing IPs from the
-		blacklist if no longer present, and adds new bad IPs to the
-		blacklist.
-		"""
-		if self.banaction is not None:
-			if self._timer:
-				self._timer.cancel()
-				self._timer = None
-
-			try:
-				ips = self.getList(
-					self.bancategory, self.score, self.age, self.bankey)
-				# Remove old IPs no longer listed
-				self._unbanIPs(self._bannedips - ips)
-				# Add new IPs which are now listed
-				self._banIPs(ips - self._bannedips)
-
-				self._logSys.info(
-					"Updated IPs for jail '%s'. Update again in %i seconds",
-					self._jail.name, self.updateperiod)
-			finally:
-				self._timer = threading.Timer(self.updateperiod, self.update)
-				self._timer.start()
-
-	def stop(self):
-		"""If `banaction` set, clears blacklisted IPs.
-		"""
-		if self.banaction is not None:
-			if self._timer:
-				self._timer.cancel()
-				self._timer = None
-			self._unbanIPs(self._bannedips.copy())
-
-	def ban(self, aInfo):
-		"""Reports banned IP to badips.com.
-
-		Parameters
-		----------
-		aInfo : dict
-			Dictionary which includes information in relation to
-			the ban.
-
-		Raises
-		------
-		HTTPError
-			Any issues with badips.com request.
-		"""
-		try:
-			url = "/".join([self._badips, "add", self.category, aInfo['ip']])
-			if self.key:
-				url = "?".join([url, urlencode({'key': self.key})])
-			response = urlopen(self._Request(url))
-		except HTTPError as response:
-			messages = json.loads(response.read().decode('utf-8'))
-			self._logSys.error(
-				"Response from badips.com report: '%s'",
-				messages['err'])
-			raise
-		else:
-			messages = json.loads(response.read().decode('utf-8'))
-			self._logSys.info(
-				"Response from badips.com report: '%s'",
-				messages['suc'])
-
-Action = BadIPsAction
@@ -7,13 +7,13 @@
 # Action to report IP address to blocklist.de
 # Blocklist.de must be signed up to at www.blocklist.de
 # Once registered, one or more servers can be added.
-# This action requires the server 'email address' and the associated apikey.
+# This action requires the server 'email address' and the assoicate apikey.
 #
 # From blocklist.de:
 #   www.blocklist.de is a free and voluntary service provided by a
 #   Fraud/Abuse-specialist, whose servers are often attacked on SSH-,
 #   Mail-Login-, FTP-, Webserver- and other services.
-#   The mission is to report all attacks to the abuse departments of the
+#   The mission is to report all attacks to the abuse deparments of the
 #   infected PCs/servers to ensure that the responsible provider can inform
 #   the customer about the infection and disable them
 #
@@ -25,7 +25,7 @@
 #   * The recidive where the IP has been banned multiple times
 #   * Where maxretry has been set quite high, beyond the normal user typing
 #     password incorrectly.
-#   * For filters that have a low likelihood of receiving human errors
+#   * For filters that have a low likelyhood of receiving human errors
 #

 [Definition]
@@ -1,55 +0,0 @@
-#
-# Author: Mike Rushton
-#
-# Referenced from from http://www.normyee.net/blog/2012/02/02/adding-cloudflare-support-to-fail2ban by NORM YEE
-#
-# To get your Cloudflare API key: https://www.cloudflare.com/my-account
-#
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed once at the start of Fail2Ban.
-# Values:  CMD
-#
-actionstart =
-
-# Option:  actionstop
-# Notes.:  command executed once at the end of Fail2Ban
-# Values:  CMD
-#
-actionstop =
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck =
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-#          <failures>  number of failures
-#          <time>  unix timestamp of the ban time
-# Values:  CMD
-#
-actionban = curl https://www.cloudflare.com/api_json.html -d 'a=ban' -d 'tkn=<cftoken>' -d 'email=<cfuser>' -d 'key=<ip>'
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    <ip>  IP address
-#          <failures>  number of failures
-#          <time>  unix timestamp of the ban time
-# Values:  CMD
-#
-actionunban = curl https://www.cloudflare.com/api_json.html -d 'a=nul' -d 'tkn=<cftoken>' -d 'email=<cfuser>' -d 'key=<ip>'
-
-
-[Init]
-
-# Default Cloudflare API token 
-cftoken = 
-
-# Default Cloudflare username
-cfuser = 
@@ -5,7 +5,7 @@
 # offending IP address.
 # This uses the https://abusix.com/contactdb.html to lookup abuse contacts.
 #
-# DEPENDENCIES:
+# DEPENDANCIES:
 # This requires the dig command from bind-utils
 #
 # You should provide the <logpath> in the jail config - lines from the log
@@ -14,7 +14,7 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf

 [Definition]

@@ -31,6 +31,22 @@ actionunban = ipset del fail2ban-<name> <ip> -exist

 [Init]

+# Default name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ]
+#
+protocol = tcp
+
 # Option:  chain
 # Notes    specifies the iptables chain to which the fail2ban rules should be
 #          added
@@ -4,26 +4,42 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf

 [Definition]

-actionstart = firewall-cmd --direct --add-chain ipv4 filter f2b-<name>
-              firewall-cmd --direct --add-rule ipv4 filter f2b-<name> 1000 -j RETURN
-              firewall-cmd --direct --add-rule ipv4 filter <chain> 0 -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
+actionstart = firewall-cmd --direct --add-chain ipv4 filter fail2ban-<name>
+              firewall-cmd --direct --add-rule ipv4 filter fail2ban-<name> 1000 -j RETURN
+              firewall-cmd --direct --add-rule ipv4 filter <chain> 0 -m state --state NEW -p <protocol> --dport <port> -j fail2ban-<name>

-actionstop = firewall-cmd --direct --remove-rule ipv4 filter <chain> 0 -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
-             firewall-cmd --direct --remove-rules ipv4 filter f2b-<name>
-             firewall-cmd --direct --remove-chain ipv4 filter f2b-<name>
+actionstop = firewall-cmd --direct --remove-rule ipv4 filter <chain> 0 -m state --state NEW -p <protocol> --dport <port> -j fail2ban-<name>
+             firewall-cmd --direct --remove-rules ipv4 filter fail2ban-<name>
+             firewall-cmd --direct --remove-chain ipv4 filter fail2ban-<name>

-actioncheck = firewall-cmd --direct --get-chains ipv4 filter | grep -q 'f2b-<name>$'
+actioncheck = firewall-cmd --direct --get-chains ipv4 filter | grep -q '^fail2ban-<name>$'

-actionban = firewall-cmd --direct --add-rule ipv4 filter f2b-<name> 0 -s <ip> -j <blocktype>
+actionban = firewall-cmd --direct --add-rule ipv4 filter fail2ban-<name> 0 -s <ip> -j <blocktype>

-actionunban = firewall-cmd --direct --remove-rule ipv4 filter f2b-<name> 0 -s <ip> -j <blocktype>
+actionunban = firewall-cmd --direct --remove-rule ipv4 filter fail2ban-<name> 0 -s <ip> -j <blocktype>

 [Init]

+# Default name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ]
+#
+protocol = tcp
+
 # Option:  chain
 # Notes    specifies the iptables chain to which the fail2ban rules should be
 #          added
@@ -8,7 +8,7 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf


 [Definition]
@@ -17,23 +17,23 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> -p <protocol> -j f2b-<name>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I <chain> -p <protocol> -j fail2ban-<name>

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -X f2b-<name>
+actionstop = iptables -D <chain> -p <protocol> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -X fail2ban-<name>

 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = iptables -n -L <chain> | grep -q 'fail2ban-<name>[ \t]'

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -41,7 +41,7 @@ actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j <blocktype>

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -49,7 +49,22 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = iptables -D fail2ban-<name> -s <ip> -j <blocktype>

 [Init]

+# Default name of the chain
+#
+name = default
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+
+# Option:  chain
+# Notes    specifies the iptables chain to which the fail2ban rules should be
+#          added
+# Values:  STRING  Default: INPUT
+chain = INPUT
@@ -0,0 +1,22 @@
+# Fail2Ban configuration file
+#
+# Author: Daniel Black
+#
+# This is a included configuration file and includes the defination for the blocktype
+# used in all iptables based actions by default.
+#
+# The user can override the default in iptables-blocktype.local
+
+[INCLUDES]
+
+after = iptables-blocktype.local
+
+[Init]
+
+# Option:  blocktype
+# Note:    This is what the action does with rules. This can be any jump target
+#          as per the iptables man page (section 8). Common values are DROP
+#          REJECT, REJECT --reject-with icmp-port-unreachable
+# Values:  STRING
+blocktype = REJECT --reject-with icmp-port-unreachable
+
@@ -1,45 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Daniel Black
-#
-# This is a included configuration file and includes the definitions for the iptables
-# used in all iptables based actions by default.
-#
-# The user can override the defaults in iptables-common.local
-
-[INCLUDES]
-
-after = iptables-blocktype.local
-        iptables-common.local
-# iptables-blocktype.local is obsolete
-
-[Init]
-
-# Option:  chain
-# Notes    specifies the iptables chain to which the Fail2Ban rules should be
-#          added
-# Values:  STRING  Default: INPUT
-chain = INPUT
-
-# Default name of the chain
-#
-name = default
-
-# Option:  port
-# Notes.:  specifies port to monitor
-# Values:  [ NUM | STRING ]  Default:
-#
-port = ssh
-
-# Option:  protocol
-# Notes.:  internally used by config reader for interpolations.
-# Values:  [ tcp | udp | icmp | all ] Default: tcp
-#
-protocol = tcp
-
-# Option:  blocktype
-# Note:    This is what the action does with rules. This can be any jump target
-#          as per the iptables man page (section 8). Common values are DROP
-#          REJECT, REJECT --reject-with icmp-port-unreachable
-# Values:  STRING
-blocktype = REJECT --reject-with icmp-port-unreachable
@@ -19,7 +19,7 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf

 [Definition]

@@ -27,16 +27,16 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = ipset --create f2b-<name> iphash
-              iptables -I <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
+actionstart = ipset --create fail2ban-<name> iphash
+              iptables -I INPUT -p <protocol> -m multiport --dports <port> -m set --match-set fail2ban-<name> src -j <blocktype>

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
-             ipset --flush f2b-<name>
-             ipset --destroy f2b-<name>
+actionstop = iptables -D INPUT -p <protocol> -m multiport --dports <port> -m set --match-set fail2ban-<name> src -j <blocktype>
+             ipset --flush fail2ban-<name>
+             ipset --destroy fail2ban-<name>

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -44,7 +44,7 @@ actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -m s
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = ipset --test f2b-<name> <ip> ||  ipset --add f2b-<name> <ip>
+actionban = ipset --test fail2ban-<name> <ip> ||  ipset --add fail2ban-<name> <ip>

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -52,7 +52,22 @@ actionban = ipset --test f2b-<name> <ip> ||  ipset --add f2b-<name> <ip>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = ipset --test f2b-<name> <ip> && ipset --del f2b-<name> <ip>
+actionunban = ipset --test fail2ban-<name> <ip> && ipset --del fail2ban-<name> <ip>

 [Init]

+# Default name of the ipset
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default: ssh
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
@@ -15,7 +15,8 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf
+

 [Definition]

@@ -23,16 +24,16 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = ipset create f2b-<name> hash:ip timeout <bantime>
-              iptables -I <chain> -m set --match-set f2b-<name> src -j <blocktype>
+actionstart = ipset create fail2ban-<name> hash:ip timeout <bantime>
+              iptables -I INPUT -m set --match-set fail2ban-<name> src -j <blocktype>

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -m set --match-set f2b-<name> src -j <blocktype>
-             ipset flush f2b-<name>
-             ipset destroy f2b-<name>
+actionstop = iptables -D INPUT -m set --match-set fail2ban-<name> src -j <blocktype>
+             ipset flush fail2ban-<name>
+             ipset destroy fail2ban-<name>

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -40,7 +41,7 @@ actionstop = iptables -D <chain> -m set --match-set f2b-<name> src -j <blocktype
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = ipset add f2b-<name> <ip> timeout <bantime> -exist
+actionban = ipset add fail2ban-<name> <ip> timeout <bantime> -exist

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -48,12 +49,16 @@ actionban = ipset add f2b-<name> <ip> timeout <bantime> -exist
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = ipset del f2b-<name> <ip> -exist
+actionunban = ipset del fail2ban-<name> <ip> -exist

 [Init]

+# Default name of the ipset
+#
+name = default
+
 # Option: bantime
 # Notes:  specifies the bantime in seconds (handled internally rather than by fail2ban)
 # Values:  [ NUM ]  Default: 600
-#
+
 bantime = 600
@@ -15,7 +15,8 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf
+

 [Definition]

@@ -23,16 +24,16 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = ipset create f2b-<name> hash:ip timeout <bantime>
-              iptables -I <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
+actionstart = ipset create fail2ban-<name> hash:ip timeout <bantime>
+              iptables -I INPUT -p <protocol> -m multiport --dports <port> -m set --match-set fail2ban-<name> src -j <blocktype>

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
-             ipset flush f2b-<name>
-             ipset destroy f2b-<name>
+actionstop = iptables -D INPUT -p <protocol> -m multiport --dports <port> -m set --match-set fail2ban-<name> src -j <blocktype>
+             ipset flush fail2ban-<name>
+             ipset destroy fail2ban-<name>

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -40,7 +41,7 @@ actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -m s
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = ipset add f2b-<name> <ip> timeout <bantime> -exist
+actionban = ipset add fail2ban-<name> <ip> timeout <bantime> -exist

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -48,12 +49,28 @@ actionban = ipset add f2b-<name> <ip> timeout <bantime> -exist
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = ipset del f2b-<name> <ip> -exist
+actionunban = ipset del fail2ban-<name> <ip> -exist

 [Init]

+# Default name of the ipset
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default: ssh
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+
 # Option: bantime
 # Notes:  specifies the bantime in seconds (handled internally rather than by fail2ban)
 # Values:  [ NUM ]  Default: 600
-#
+
 bantime = 600
@@ -3,15 +3,15 @@
 # Author: Guido Bozzetto
 # Modified: Cyril Jaquier
 #
-# make "f2b-<name>" chain to match drop IP
-# make "f2b-<name>-log" chain to log and drop
-# insert a jump to f2b-<name> from -I <chain> if proto/port match
+# make "fail2ban-<name>" chain to match drop IP
+# make "fail2ban-<name>-log" chain to log and drop
+# insert a jump to fail2ban-<name> from -I <chain> if proto/port match
 #
 #

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf

 [Definition]

@@ -19,28 +19,28 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> 1 -p <protocol> -m multiport --dports <port> -j f2b-<name>
-              iptables -N f2b-<name>-log
-              iptables -I f2b-<name>-log -j LOG --log-prefix "$(expr f2b-<name> : '\(.\{1,23\}\)'):DROP " --log-level warning -m limit --limit 6/m --limit-burst 2
-              iptables -A f2b-<name>-log -j <blocktype>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I <chain> 1 -p <protocol> -m multiport --dports <port> -j fail2ban-<name>
+              iptables -N fail2ban-<name>-log
+              iptables -I fail2ban-<name>-log -j LOG --log-prefix "$(expr fail2ban-<name> : '\(.\{1,23\}\)'):DROP " --log-level warning -m limit --limit 6/m --limit-burst 2
+              iptables -A fail2ban-<name>-log -j <blocktype>

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -F f2b-<name>-log
-             iptables -X f2b-<name>
-             iptables -X f2b-<name>-log
+actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -F fail2ban-<name>-log
+             iptables -X fail2ban-<name>
+             iptables -X fail2ban-<name>-log

 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L f2b-<name>-log >/dev/null
+actioncheck = iptables -n -L fail2ban-<name>-log >/dev/null

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -48,7 +48,7 @@ actioncheck = iptables -n -L f2b-<name>-log >/dev/null
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j f2b-<name>-log
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j fail2ban-<name>-log

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -56,7 +56,28 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j f2b-<name>-log
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j f2b-<name>-log
+actionunban = iptables -D fail2ban-<name> -s <ip> -j fail2ban-<name>-log

 [Init]

+# Default name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+
+# Option:  chain
+# Notes    specifies the iptables chain to which the fail2ban rules should be
+#          added
+# Values:  STRING  Default: INPUT
+chain = INPUT
@@ -6,7 +6,7 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf

 [Definition]

@@ -14,23 +14,23 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I <chain> -p <protocol> -m multiport --dports <port> -j fail2ban-<name>

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -X f2b-<name>
+actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -X fail2ban-<name>

 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = iptables -n -L <chain> | grep -q 'fail2ban-<name>[ \t]'

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -38,7 +38,7 @@ actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j <blocktype>

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -46,7 +46,28 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = iptables -D fail2ban-<name> -s <ip> -j <blocktype>

 [Init]

+# Default name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+
+# Option:  chain
+# Notes    specifies the iptables chain to which the fail2ban rules should be
+#          added
+# Values:  STRING  Default: INPUT
+chain = INPUT
@@ -8,7 +8,8 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf
+

 [Definition]

@@ -16,23 +17,23 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I <chain> -m state --state NEW -p <protocol> --dport <port> -j fail2ban-<name>

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -X f2b-<name>
+actionstop = iptables -D <chain> -m state --state NEW -p <protocol> --dport <port> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -X fail2ban-<name>

 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = iptables -n -L <chain> | grep -q 'fail2ban-<name>[ \t]'

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -40,7 +41,7 @@ actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j <blocktype>

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -48,7 +49,28 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = iptables -D fail2ban-<name> -s <ip> -j <blocktype>

 [Init]

+# Default name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+
+# Option:  chain
+# Notes    specifies the iptables chain to which the fail2ban rules should be
+#          added
+# Values:  STRING  Default: INPUT
+chain = INPUT
@@ -6,7 +6,8 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf
+

 [Definition]

@@ -22,30 +23,30 @@ before = iptables-common.conf
 # iptables-persistent package).
 # 
 # Explanation of the rule below:
-#    Check if any packets coming from an IP on the f2b-<name>
+#    Check if any packets coming from an IP on the fail2ban-<name>
 #    list have been seen in the last 3600 seconds. If yes, update the
 #    timestamp for this IP and drop the packet. If not, let the packet
 #    through.
 #
-#    Fail2ban inserts blacklisted hosts into the f2b-<name> list
+#    Fail2ban inserts blacklisted hosts into the fail2ban-<name> list
 #    and removes them from the list after some time, according to its
 #    own rules. The 3600 second timeout is independent and acts as a
 #    safeguard in case the fail2ban process dies unexpectedly. The
 #    shorter of the two timeouts actually matters.
-actionstart = if [ `id -u` -eq 0 ];then iptables -I <chain> -m recent --update --seconds 3600 --name f2b-<name> -j <blocktype>;fi
+actionstart = if [ `id -u` -eq 0 ];then iptables -I INPUT -m recent --update --seconds 3600 --name fail2ban-<name> -j <blocktype>;fi

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = echo / > /proc/net/xt_recent/f2b-<name>
-             if [ `id -u` -eq 0 ];then iptables -D <chain> -m recent --update --seconds 3600 --name f2b-<name> -j <blocktype>;fi
+actionstop = echo / > /proc/net/xt_recent/fail2ban-<name>
+             if [ `id -u` -eq 0 ];then iptables -D INPUT -m recent --update --seconds 3600 --name fail2ban-<name> -j <blocktype>;fi

 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = test -e /proc/net/xt_recent/f2b-<name>
+actioncheck = test -e /proc/net/xt_recent/fail2ban-<name>

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -53,7 +54,7 @@ actioncheck = test -e /proc/net/xt_recent/f2b-<name>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = echo +<ip> > /proc/net/xt_recent/f2b-<name>
+actionban = echo +<ip> > /proc/net/xt_recent/fail2ban-<name>

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -61,7 +62,16 @@ actionban = echo +<ip> > /proc/net/xt_recent/f2b-<name>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = echo -<ip> > /proc/net/xt_recent/f2b-<name>
+actionunban = echo -<ip> > /proc/net/xt_recent/fail2ban-<name>

 [Init]

+# Default name of the chain
+#
+name = default
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
@@ -6,7 +6,7 @@

 [INCLUDES]

-before = iptables-common.conf
+before = iptables-blocktype.conf

 [Definition]

@@ -14,23 +14,23 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> -p <protocol> --dport <port> -j f2b-<name>
+actionstart = iptables -N fail2ban-<name>
+              iptables -A fail2ban-<name> -j RETURN
+              iptables -I <chain> -p <protocol> --dport <port> -j fail2ban-<name>

 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> --dport <port> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -X f2b-<name>
+actionstop = iptables -D <chain> -p <protocol> --dport <port> -j fail2ban-<name>
+             iptables -F fail2ban-<name>
+             iptables -X fail2ban-<name>

 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = iptables -n -L <chain> | grep -q 'fail2ban-<name>[ \t]'

 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -38,7 +38,7 @@ actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = iptables -I fail2ban-<name> 1 -s <ip> -j <blocktype>

 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -46,7 +46,28 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = iptables -D fail2ban-<name> -s <ip> -j <blocktype>

 [Init]

+# Default name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+
+# Option:  chain
+# Notes    specifies the iptables chain to which the fail2ban rules should be
+#          added
+# Values:  STRING  Default: INPUT
+chain = INPUT
@@ -42,7 +42,7 @@ actionban = printf %%b "Hi,\n
            Here is more information about <ip>:\n
            `whois <ip> || echo missing whois program`\n\n
            Lines containing IP:<ip> in <logpath>\n
-            `grep '[^0-9]<ip>[^0-9]' <logpath>`\n\n
+            `grep -E '(^|[^0-9])<ip>([^0-9]|$)' <logpath>`\n\n
            Regards,\n
            Fail2Ban"|mail -s "[Fail2Ban] <name>: banned <ip> from  `uname -n`" <dest>

@@ -8,56 +8,6 @@

 after = sendmail-common.local

-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed once at the start of Fail2Ban.
-# Values:  CMD
-#
-actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on `uname -n`
-              Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
-              From: <sendername> <<sender>>
-              To: <dest>\n
-              Hi,\n
-              The jail <name> has been started successfully.\n
-              Regards,\n
-              Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
-
-# Option:  actionstop
-# Notes.:  command executed once at the end of Fail2Ban
-# Values:  CMD
-#
-actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped on `uname -n`
-             Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
-             From: <sendername> <<sender>>
-             To: <dest>\n
-             Hi,\n
-             The jail <name> has been stopped.\n
-             Regards,\n
-             Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck = 
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = 
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionunban = 
-
 [Init]

 # Recipient mail address
@@ -1,37 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
-
-[Definition]
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
-            From: <sendername> <<sender>>
-            To: <dest>\n
-            Hi,\n
-            The IP <ip> has just been banned by Fail2Ban after
-            <failures> attempts against <name>.\n\n
-            Here are more information about <ip>:\n
-            `/usr/bin/whois <ip>`\n\n
-            Matches for <name> with <ipjailfailures> failures IP:<ip>\n
-            <ipjailmatches>\n\n
-            Regards,\n
-            Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
-
-[Init]
-
-# Default name of the chain
-#
-name = default
@@ -1,37 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
-
-[Definition]
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
-            From: <sendername> <<sender>>
-            To: <dest>\n
-            Hi,\n
-            The IP <ip> has just been banned by Fail2Ban after
-            <failures> attempts against <name>.\n\n
-            Here are more information about <ip>:\n
-            `/usr/bin/whois <ip>`\n\n
-            Matches with <ipfailures> failures IP:<ip>\n
-            <ipmatches>\n\n
-            Regards,\n
-            Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
-
-[Init]
-
-# Default name of the chain
-#
-name = default
@@ -10,6 +10,38 @@ before = sendmail-common.conf

 [Definition]

+# Option:  actionstart
+# Notes.:  command executed once at the start of Fail2Ban.
+# Values:  CMD
+#
+actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on `uname -n`
+              Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+              From: <sendername> <<sender>>
+              To: <dest>\n
+              Hi,\n
+              The jail <name> has been started successfully.\n
+              Regards,\n
+              Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actionstop
+# Notes.:  command executed once at the end of Fail2Ban
+# Values:  CMD
+#
+actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped on `uname -n`
+             Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+             From: <sendername> <<sender>>
+             To: <dest>\n
+             Hi,\n
+             The jail <name> has been stopped.\n
+             Regards,\n
+             Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actioncheck
+# Notes.:  command executed once before each actionban command
+# Values:  CMD
+#
+actioncheck = 
+
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
@@ -26,10 +58,18 @@ actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
            Here is more information about <ip>:\n
            `/usr/bin/whois <ip> || echo missing whois program`\n\n
            Lines containing IP:<ip> in <logpath>\n
-            `grep '[^0-9]<ip>[^0-9]' <logpath>`\n\n
+            `grep -E '(^|[^0-9])<ip>([^0-9]|$)' <logpath>`\n\n
            Regards,\n
            Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>

+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionunban = 
+
 [Init]

 # Default name of the chain
@@ -1,37 +0,0 @@
-# Fail2Ban configuration file
-#
-# Author: Cyril Jaquier
-#
-#
-
-[INCLUDES]
-
-before = sendmail-common.conf
-
-[Definition]
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP. Take care that the
-#          command is executed with Fail2Ban user rights.
-# Tags:    See jail.conf(5) man page
-# Values:  CMD
-#
-actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
-            From: <sendername> <<sender>>
-            To: <dest>\n
-            Hi,\n
-            The IP <ip> has just been banned by Fail2Ban after
-            <failures> attempts against <name>.\n\n
-            Here are more information about <ip>:\n
-            `/usr/bin/whois <ip>`\n\n
-            Matches:\n
-            <matches>\n\n
-            Regards,\n
-            Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
-
-[Init]
-
-# Default name of the chain
-#
-name = default
@@ -10,6 +10,38 @@ before = sendmail-common.conf

 [Definition]

+# Option:  actionstart
+# Notes.:  command executed once at the start of Fail2Ban.
+# Values:  CMD
+#
+actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on `uname -n`
+              Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+              From: <sendername> <<sender>>
+              To: <dest>\n
+              Hi,\n
+              The jail <name> has been started successfully.\n
+              Regards,\n
+              Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actionstop
+# Notes.:  command executed once at the end of Fail2Ban
+# Values:  CMD
+#
+actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped on `uname -n`
+             Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+             From: <sendername> <<sender>>
+             To: <dest>\n
+             Hi,\n
+             The jail <name> has been stopped.\n
+             Regards,\n
+             Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actioncheck
+# Notes.:  command executed once before each actionban command
+# Values:  CMD
+#
+actioncheck = 
+
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
@@ -28,6 +60,14 @@ actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
            Regards,\n
            Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>

+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionunban = 
+
 [Init]

 # Default name of the chain
@@ -10,6 +10,38 @@ before = sendmail-common.conf

 [Definition]

+# Option:  actionstart
+# Notes.:  command executed once at the start of Fail2Ban.
+# Values:  CMD
+#
+actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on `uname -n`
+              Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+              From: <sendername> <<sender>>
+              To: <dest>\n
+              Hi,\n
+              The jail <name> has been started successfully.\n
+              Regards,\n
+              Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actionstop
+# Notes.:  command executed once at the end of Fail2Ban
+# Values:  CMD
+#
+actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped on `uname -n`
+             Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+             From: <sendername> <<sender>>
+             To: <dest>\n
+             Hi,\n
+             The jail <name> has been stopped.\n
+             Regards,\n
+             Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+# Option:  actioncheck
+# Notes.:  command executed once before each actionban command
+# Values:  CMD
+#
+actioncheck = 
+
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
@@ -26,6 +58,14 @@ actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
            Regards,\n
            Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>

+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionunban = 
+
 [Init]

 # Default name of the chain
@@ -1,224 +0,0 @@
-# emacs: -*- mode: python; py-indent-offset: 4; indent-tabs-mode: t -*-
-# vi: set ft=python sts=4 ts=4 sw=4 noet :
-
-# This file is part of Fail2Ban.
-#
-# Fail2Ban is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# Fail2Ban is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Fail2Ban; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-
-import socket
-import smtplib
-from email.mime.text import MIMEText
-from email.utils import formatdate, formataddr
-
-from fail2ban.server.actions import ActionBase, CallingMap
-
-messages = {}
-messages['start'] = \
-"""Hi,
-
-The jail %(jailname)s has been started successfully.
-
-Regards,
-Fail2Ban"""
-
-messages['stop'] = \
-"""Hi,
-
-The jail %(jailname)s has been stopped.
-
-Regards,
-Fail2Ban"""
-
-messages['ban'] = {}
-messages['ban']['head'] = \
-"""Hi,
-
-The IP %(ip)s has just been banned for %(bantime)i seconds
-by Fail2Ban after %(failures)i attempts against %(jailname)s.
-"""
-messages['ban']['tail'] = \
-"""
-Regards,
-Fail2Ban"""
-messages['ban']['matches'] = \
-"""
-Matches for this ban:
-%(matches)s
-"""
-messages['ban']['ipmatches'] = \
-"""
-Matches for %(ip)s:
-%(ipmatches)s
-"""
-messages['ban']['ipjailmatches'] = \
-"""
-Matches for %(ip)s for jail %(jailname)s:
-%(ipjailmatches)s
-"""
-
-class SMTPAction(ActionBase):
-	"""Fail2Ban action which sends emails to inform on jail starting,
-	stopping and bans.
-	"""
-
-	def __init__(
-		self, jail, name, host="localhost", user=None, password=None,
-		sendername="Fail2Ban", sender="fail2ban", dest="root", matches=None):
-		"""Initialise action.
-
-		Parameters
-		----------
-		jail : Jail
-			The jail which the action belongs to.
-		name : str
-			Named assigned to the action.
-		host : str, optional
-			SMTP host, of host:port format. Default host "localhost" and
-			port "25"
-		user : str, optional
-			Username used for authentication with SMTP server.
-		password : str, optional
-			Password used for authentication with SMTP server.
-		sendername : str, optional
-			Name to use for from address in email. Default "Fail2Ban".
-		sender : str, optional
-			Email address to use for from address in email.
-			Default "fail2ban".
-		dest : str, optional
-			Email addresses of intended recipient(s) in comma space ", "
-			delimited format. Default "root".
-		matches : str, optional
-			Type of matches to be included from ban in email. Can be one
-			of "matches", "ipmatches" or "ipjailmatches". Default None
-			(see man jail.conf.5).
-		"""
-
-		super(SMTPAction, self).__init__(jail, name)
-
-		self.host = host
-		#TODO: self.ssl = ssl
-
-		self.user = user
-		self.password =password
-
-		self.fromname = sendername
-		self.fromaddr = sender
-		self.toaddr = dest
-
-		self.matches = matches
-
-		self.message_values = CallingMap(
-			jailname = self._jail.name,
-			hostname = socket.gethostname,
-			bantime = self._jail.actions.getBanTime,
-			)
-
-	def _sendMessage(self, subject, text):
-		"""Sends message based on arguments and instance's properties.
-
-		Parameters
-		----------
-		subject : str
-			Subject of the email.
-		text : str
-			Body of the email.
-
-		Raises
-		------
-		SMTPConnectionError
-			Error on connecting to host.
-		SMTPAuthenticationError
-			Error authenticating with SMTP server.
-		SMTPException
-			See Python `smtplib` for full list of other possible
-			exceptions.
-		"""
-		msg = MIMEText(text)
-		msg['Subject'] = subject
-		msg['From'] = formataddr((self.fromname, self.fromaddr))
-		msg['To'] = self.toaddr
-		msg['Date'] = formatdate()
-
-		smtp = smtplib.SMTP()
-		try:
-			self._logSys.debug("Connected to SMTP '%s', response: %i: %s",
-				self.host, *smtp.connect(self.host))
-			if self.user and self.password:
-				smtp.login(self.user, self.password)
-			failed_recipients = smtp.sendmail(
-				self.fromaddr, self.toaddr.split(", "), msg.as_string())
-		except smtplib.SMTPConnectError:
-			self._logSys.error("Error connecting to host '%s'", self.host)
-			raise
-		except smtplib.SMTPAuthenticationError:
-			self._logSys.error(
-				"Failed to authenticate with host '%s' user '%s'",
-				self.host, self.user)
-			raise
-		except smtplib.SMTPException:
-			self._logSys.error(
-				"Error sending mail to host '%s' from '%s' to '%s'",
-				self.host, self.fromaddr, self.toaddr)
-			raise
-		else:
-			if failed_recipients:
-				self._logSys.warning(
-					"Email to '%s' failed to following recipients: %r",
-					self.toaddr, failed_recipients)
-			self._logSys.debug("Email '%s' successfully sent", subject)
-		finally:
-			try:
-				self._logSys.debug("Disconnected from '%s', response %i: %s",
-					self.host, *smtp.quit())
-			except smtplib.SMTPServerDisconnected:
-				pass # Not connected
-
-	def start(self):
-		"""Sends email to recipients informing that the jail has started.
-		"""
-		self._sendMessage(
-			"[Fail2Ban] %(jailname)s: started on %(hostname)s" %
-				self.message_values,
-			messages['start'] % self.message_values)
-
-	def stop(self):
-		"""Sends email to recipients informing that the jail has stopped.
-		"""
-		self._sendMessage(
-			"[Fail2Ban] %(jailname)s: stopped on %(hostname)s" %
-				self.message_values,
-			messages['stop'] % self.message_values)
-
-	def ban(self, aInfo):
-		"""Sends email to recipients informing that ban has occurred.
-
-		Parameters
-		----------
-		aInfo : dict
-			Dictionary which includes information in relation to
-			the ban.
-		"""
-		aInfo.update(self.message_values)
-		message = "".join([
-			messages['ban']['head'],
-			messages['ban'].get(self.matches, ""),
-			messages['ban']['tail']
-			])
-		self._sendMessage(
-			"[Fail2Ban] %(jailname)s: banned %(ip)s from %(hostname)s" %
-				aInfo,
-			message % aInfo)
-
-Action = SMTPAction
@@ -1,52 +0,0 @@
-# Fail2Ban configuration file for Bytemark Symbiosis firewall
-#
-# Author: Yaroslav Halchenko
-#
-
-
-[Definition]
-
-# Option:  actionstart
-# Notes.:  command executed once at the start of Fail2Ban.
-# Values:  CMD
-#
-actionstart =
-
-# Option:  actionstop
-# Notes.:  command executed once at the end of Fail2Ban
-# Values:  CMD
-#
-actionstop =
-
-# Option:  actioncheck
-# Notes.:  command executed once before each actionban command
-# Values:  CMD
-#
-actioncheck = iptables -n -L <chain>
-
-# Option:  actionban
-# Notes.:  command executed when banning an IP.
-# Values:  CMD
-#
-actionban = echo 'all' >| /etc/symbiosis/firewall/blacklist.d/<ip>.auto
-            iptables -I <chain> 1 -s <ip> -j <blocktype>
-
-# Option:  actionunban
-# Notes.:  command executed when unbanning an IP.
-# Values:  CMD
-#
-actionunban = rm -f /etc/symbiosis/firewall/blacklist.d/<ip>.auto
-              iptables -D <chain> -s <ip> -j <blocktype> || :
-
-[Init]
-
-# Option:  chain
-# Notes    specifies the iptables chain to which the fail2ban rules should be
-#          added to.  blacklist is a chain initiated by symbiosis firewall.
-# Values:  STRING  Default: blacklist
-chain = blacklist
-
-# Option:  blocktype
-# Note:    This is to match default symbiosis firewall type for blacklisted IPs
-# Values:  STRING
-blocktype = DROP
@@ -1,9 +1,9 @@
 # Fail2Ban action configuration file for ufw
 #
-# You are required to run "ufw enable" before this will have any effect.
+# You are required to run "ufw enable" before this will have an effect.
 #
-# The insert position should be appropriate to block the required traffic.
-# A number after an allow rule to the application won't be of much use.
+# The insert position should be approprate to block the required traffic.
+# A number after an allow rule to the application won't be much use.

 [Definition]

@@ -19,7 +19,7 @@ actionunban = [ -n "<application>" ] && app="app <application>" ; ufw delete <bl

 [Init]
 # Option: insertpos
-# Notes.:  The position number in the firewall list to insert the block rule
+# Notes.:  The postition number in the firewall list to insert the block rule
 insertpos = 1

 # Option: blocktype
@@ -1,124 +0,0 @@
-# Fail2Ban action for sending xarf Login-Attack messages to IP owner
-#
-# IMPORTANT: 
-# 
-# Emailing a IP owner of abuse is a serious complain. Make sure that it is
-# serious. Fail2ban developers and network owners recommend you only use this
-# action for:
-#   * The recidive where the IP has been banned multiple times
-#   * Where maxretry has been set quite high, beyond the normal user typing
-#     password incorrectly.
-#   * For filters that have a low likelihood of receiving human errors
-#
-# DEPENDENCIES:
-#
-# This requires the dig command from bind-utils
-#
-# This uses the https://abusix.com/contactdb.html to lookup abuse contacts.
-#
-# XARF is a specification for sending a formatted response
-# for non-messaging based abuse including:
-#
-# Login-Attack, Malware-Attack, Fraud (Phishing, etc.), Info DNSBL
-#
-# For details see:
-# https://github.com/abusix/xarf-specification
-# http://www.x-arf.org/schemata.html
-#
-# Author: Daniel Black
-# Based on complain written by Russell Odom <russ@gloomytrousers.co.uk>
-#
-#
-
-[Definition]
-
-actionstart =
-
-actionstop =
-
-actioncheck =
-
-actionban = oifs=${IFS}; IFS=.;SEP_IP=( <ip> ); set -- ${SEP_IP}; ADDRESSES=$(dig +short -t txt -q $4.$3.$2.$1.abuse-contacts.abusix.org); IFS=${oifs}
-            IP=<ip>
-            FROM=<sender>
-            SERVICE=<service>
-            FAILURES=<failures>
-            REPORTID=<time>@`uname -n`
-            TLP=<tlp>
-            PORT=<port>
-            DATE=`LC_TIME=C date -u --date=@<time> +"%%a, %%d %%h %%Y %%T +0000"`
-            if [ ! -z "$ADDRESSES" ]; then
-                (printf -- %%b "<header>\n<message>\n<report>\n";
-                 date '+Note: Local timezone is %%z (%%Z)';
-                 printf -- %%b "<ipmatches>\n\n<footer>") | <mailcmd> <mailargs> ${ADDRESSES//,/\" \"}
-            fi
-
-actionunban =
-
-[Init]
-# Option: header
-# Notes:  This is really a fixed value
-header  = Subject: abuse report about $IP - $DATE\nAuto-Submitted: auto-generated\nX-XARF: PLAIN\nContent-Transfer-Encoding: 7bit\nContent-Type: multipart/mixed; charset=utf8;\n  boundary=Abuse-bfbb0f920793ac03cb8634bde14d8a1e;\n\n--Abuse-bfbb0f920793ac03cb8634bde14d8a1e\nMIME-Version: 1.0\nContent-Transfer-Encoding: 7bit\nContent-Type: text/plain; charset=utf-8;\n
-
-# Option: footer
-# Notes:  This is really a fixed value and needs to match the report and header
-#         mime delimiters
-footer = \n\n--Abuse-bfbb0f920793ac03cb8634bde14d8a1e--
-
-# Option: report
-# Notes:  Intended to be fixed
-report =  --Abuse-bfbb0f920793ac03cb8634bde14d8a1e\nMIME-Version: 1.0\nContent-Transfer-Encoding: 7bit\nContent-Type: text/plain; charset=utf-8; name=\"report.txt\";\n\n---\nReported-From: $FROM\nCategory: abuse\nReport-ID: $REPORTID\nReport-Type: login-attack\nService: $SERVICE\nVersion: 0.2\nUser-Agent: Fail2ban v0.9\nDate: $DATE\nSource-Type: ip-address\nSource: $IP\nPort: $PORT\nSchema-URL: http://www.x-arf.org/schema/abuse_login-attack_0.1.2.json\nAttachment: text/plain\nOccurances: $FAILURES\nTLP: $TLP\n\n\n--Abuse-bfbb0f920793ac03cb8634bde14d8a1e\nMIME-Version: 1.0\nContent-Transfer-Encoding: 7bit\nContent-Type: text/plain; charset=utf8; name=\"logfile.log\";
-
-# Option: Message
-# Notes:  This can be modified by the users 
-message = Dear Sir/Madam,\n\nWe have detected abuse from the IP address $IP, which according to abusix.com is on your network. We would appreciate if you would investigate and take action as appropriate.\n\nLog lines are given below, but please ask if you require any further information.\n\n(If you are not the correct person to contact about this please accept our apologies - your e-mail address was extracted from the whois record by an automated process.)\n\n This mail was generated by Fail2Ban in a X-ARF format! You can find more information about x-arf at http://www.x-arf.org/specification.html.\n\nThe recipient address of this report was provided by the Abuse Contact DB by abusix.com. abusix.com does not maintain the content of the database. All information which we pass out, derives from the RIR databases and is processed for ease of use. If you want to change or report non working abuse contacts please contact the appropriate RIR. If you have any further question, contact abusix.com directly via email (info@abusix.com). Information about the Abuse Contact Database can be found here: https://abusix.com/global-reporting/abuse-contact-db\nabusix.com is neither responsible nor liable for the content or accuracy of this message.\n
-
-# Option:  loglines
-# Notes.:  The number of log lines to search for the IP for the report
-loglines = 9000
-
-# Option:  mailcmd
-# Notes.:  Your system mail command. It is passed the recipient
-# Values:  CMD
-#
-mailcmd =  /usr/sbin/sendmail
-
-# Option:  mailargs
-# Notes.:  Additional arguments to mail command. e.g. for standard Unix mail:
-#          CC reports to another address:
-#              -c me@example.com
-#          Appear to come from a different address - the '--' indicates
-#          arguments to be passed to Sendmail:
-#              -- -f me@example.com
-# Values:  [ STRING ]
-#
-mailargs = -f <sender>
-
-# Option:  tlp
-# Notes.:  Traffic light protocol defining the sharing of this information.
-#          http://www.trusted-introducer.org/ISTLPv11.pdf
-#          green is share to those involved in network security but it is not 
-#          to be released to the public.
-tlp = green
-
-# ALL of the following parameters should be set so the report contains
-# meaningful information
-
-# Option: service
-# Notes.: This is the service type that was attacked. e.g. ssh, pop3
-service = unspecified
-
-# Option:  logpath
-# Notes:   Path to the log files which contain relevant lines for the abuser IP
-# Values:  Filename(s) space separated and can contain wildcards (these are
-#          greped for the IP so make sure these aren't too long
-logpath = /dev/null
-
-# Option:  sender
-# Notes.:  This is the sender that is included in the XARF report
-sender = fail2ban@`uname -n`
-
-# Option:  port
-# Notes.:  This is the port number that received the login-attack
-port = 0
-
@@ -6,22 +6,20 @@
 #           file, but provide customizations in fail2ban.local file, e.g.:
 #
 # [Definition]
-# loglevel = DEBUG
+# loglevel = 4
 #

 [Definition]

 # Option: loglevel
 # Notes.: Set the log level output.
-#         CRITICAL
-#         ERROR
-#         WARNING
-#         NOTICE
-#         INFO
-#         DEBUG
-# Values: [ LEVEL ]  Default: ERROR
+#         1 = ERROR
+#         2 = WARN
+#         3 = INFO
+#         4 = DEBUG
+# Values: [ NUM ]  Default: 1
 #
-loglevel = INFO
+loglevel = 3

 # Option: logtarget
 # Notes.: Set the log target. This could be a file, SYSLOG, STDERR or STDOUT.
@@ -49,15 +47,3 @@ socket = /var/run/fail2ban/fail2ban.sock
 #
 pidfile = /var/run/fail2ban/fail2ban.pid

-# Options: dbfile
-# Notes.: Set the file for the fail2ban persistent data to be stored.
-#         A value of ":memory:" means database is only stored in memory 
-#         and data is lost when fail2ban is stopped.
-#         A value of "None" disables the database.
-# Values: [ None :memory: FILE ] Default: /var/lib/fail2ban/fail2ban.sqlite3
-dbfile = /var/lib/fail2ban/fail2ban.sqlite3
-
-# Options: dbpurgeage
-# Notes.: Sets age at which bans should be purged from the database
-# Values: [ SECONDS ] Default: 86400 (24hours)
-dbpurgeage = 86400
@@ -1,48 +0,0 @@
-# Fail2Ban filter to match web requests for selected URLs that don't exist
-#
-# This filter is aimed at blocking specific URLs that don't exist. This
-# could be a set of URLs places in a Disallow: directive in robots.txt or
-# just some web services that don't exist caused bots are searching for
-# exploitable content. This filter is designed to have a low false postitive
-# rate due.
-#
-# An alternative to this is the apache-noscript filter which blocks all
-# types of scripts that don't exist.
-#
-#
-# This is normally a predefined list of exploitable or valuable web services
-# that are hidden or aren't actually installed.
-#
-
-[INCLUDES]
-
-# overwrite with apache-common.local if _apache_error_client is incorrect.
-before = apache-common.conf
-
-[Definition]
-
-failregex = ^%(_apache_error_client)s ((AH001(28|30): )?File does not exist|(AH01264: )?script not found or unable to stat): <webroot><block>(, referer: \S+)?\s*$
-            ^%(_apache_error_client)s script '<webroot><block>' not found or unable to stat(, referer: \S+)?\s*$
-
-ignoreregex = 
-
-
-[Init]
-
-# Webroot represents the webroot on which all other files are based
-webroot = /var/www/
-# Block is the actual non-found directories to block
-block = (<webmail>|<phpmyadmin>|<wordpress>)[^,]*
-
-# These are just convient definitions that assist the blocking of stuff that 
-# isn't installed
-webmail = roundcube|(ext)?mail|horde|(v-?)?webmail
-
-phpmyadmin = (typo3/|xampp/|admin/|)(pma|(php)?[Mm]y[Aa]dmin)
-
-wordpress = wp-(login|signup)\.php
-
-
-# DEV Notes:
-#
-# Author: Daniel Black
@@ -8,7 +8,7 @@ after = apache-common.local

 [DEFAULT]

-_apache_error_client = \[\] \[(:?error|\S+:\S+)\]( \[pid \d+(:\S+ \d+)?\])? \[client <HOST>(:\d{1,5})?\]
+_apache_error_client = \[[^]]*\] \[(:?error|\S+:\S+)\]( \[pid \d+(:\S+ \d+)?\])? \[client <HOST>(:\d{1,5})?\]

 # Common prefix for [error] apache messages which also would include <HOST>
 # Depending on the version it could be
@@ -1,13 +1,5 @@
 # Fail2Ban filter to block web requests for scripts (on non scripted websites)
 #
-# This matches many types of scripts that don't exist. This could generate a
-# lot of false positive matches in cases like wikis and forums where users
-# no affiliated with the website can insert links to missing files/scripts into
-# pages and cause non-malicious browsers of the site to trigger against this
-# filter.
-#
-# If you'd like to match specific URLs that don't exist see the
-# apache-botsearch filter.
 #

 [INCLUDES]
@@ -27,6 +19,6 @@ ignoreregex =
 #
 # https://wiki.apache.org/httpd/ListOfErrors for apache error IDs
 #
-# Second regex, script '/\S*(\.php|\.asp|\.exe|\.pl)\S*' not found or unable to stat\s*$ is in httpd-2.2
+# Second regex, script '/\S*(\.php|\.asp|\.exe|\.pl)\S*' not found or unable to stat\s*$ is Before http-2.2
 #
 # Author: Cyril Jaquier
@@ -1,16 +0,0 @@
-# Fail2Ban filter for failure attempts in Counter Strike-1.6
-#
-#
-
-[Definition]
-
-failregex = ^: Bad Rcon: "rcon \d+ "\S+"  sv_contact ".*?"" from "<HOST>:\d+"$
-
-
-[Init]
-
-datepattern = ^L %%d/%%m/%%Y - %%H:%%M:%%S
-
-
-# Author: Daniel Black
-
@@ -12,8 +12,7 @@ before = common.conf

 _daemon = courieresmtpd

-failregex = ^%(__prefix_line)serror,relay=<HOST>,.*: 550 User (<.*> )?unknown\.?$
-            ^%(__prefix_line)serror,relay=<HOST>,msg="535 Authentication failed\.",cmd:( AUTH \S+)?( [0-9a-zA-Z\+/=]+)?$
+failregex = ^%(__prefix_line)serror,relay=<HOST>,.*: 550 User unknown\.$

 ignoreregex = 

@@ -11,9 +11,9 @@ before = common.conf

 [Definition]

-_daemon = (?:cyrus/)?(?:imap(d|s)?|pop3(d|s)?)
+_daemon = (?:cyrus/)?(?:imapd?|pop3d?)

-failregex = ^%(__prefix_line)sbadlogin: \S+ ?\[<HOST>\] \S+ .*?\[?SASL\(-13\): (authentication failure|user not found): .*\]?$
+failregex = ^%(__prefix_line)sbadlogin: \S+ ?\[<HOST>\] \S+ .*?\[?SASL\(-13\): authentication failure: .*\]?$

 ignoreregex = 

@@ -1,23 +0,0 @@
-# Fail2Ban configuration file for Directadmin
-#
-#
-#
-
-[INCLUDES]
-
-before = common.conf
-
-[Definition]
-
-failregex = ^: \'<HOST>\' \d{1,3} failed login attempt(s)?. \s*
-
-ignoreregex = 
-
-[Init]
-datepattern = ^%%Y:%%m:%%d-%%H:%%M:%%S
-
-#
-# Requires Directadmin v1.45.3 or higher. http://www.directadmin.com/features.php?id=1590
-#
-# Author: Cyril Roos
-
@@ -15,15 +15,11 @@ failregex = ^%(__prefix_line)s(pam_unix(\(dovecot:auth\))?:)?\s+authentication f

 ignoreregex = 

-[Init]
-
-journalmatch = _SYSTEMD_UNIT=dovecot.service
-
 # DEV Notes:
 # * the first regex is essentially a copy of pam-generic.conf
 # * Probably doesn't do dovecot sql/ldap backends properly
 # * Removed the 'no auth attempts' log lines from the matches because produces
-#    lots of false positives on misconfigured MTAs making regexp unusable
+#    lots of false positives on misconfigured MTAs making regexp unuseable
 #
 # Author: Martin Waschbuesch
 #         Daniel Black (rewrote with begin and end anchors)
@@ -16,22 +16,4 @@
 #          searched for other failures. This tag can be used multiple times.
 # Values:  TEXT
 #
-failregex = ^=INFO REPORT====  ===\nI\(<0\.\d+\.0>:ejabberd_c2s:\d+\) : \([^)]+\) Failed authentication for .+ from IP <HOST> \({{(?:\d+,){3}\d+},\d+}\)$
-            ^(?:\.\d+)? \[info\] <0\.\d+\.\d>@ejabberd_c2s:wait_for_feature_request:\d+ \([^\)]+\) Failed authentication for \S+ from IP <HOST>$
-
-# Option:  ignoreregex
-# Notes.:  regex to ignore. If this regex matches, the line is ignored.
-# Values:  TEXT
-#
-ignoreregex = 
-
-[Init]
-
-# "maxlines" is number of log lines to buffer for multi-line regex searches
-maxlines = 2
-
-# Option:  journalmatch
-# Notes.:  systemd journalctl style match filter for journal based backend
-# Values:  TEXT
-#
-journalmatch = 
+failregex = ^(?:\.\d+)? \[info\] <0\.\d+\.\d>@ejabberd_c2s:wait_for_feature_request:\d+ \([^\)]+\) Failed authentication for \S+ from IP <HOST>$
@@ -1,22 +1,6 @@
 # Fail2Ban filter for exim the spam rejection messages
 #
-# Honeypot traps are very useful for fighting spam. You just activate an email
-# address on your domain that you do not intend to use at all, and that normal
-# people do not risk to try for contacting you. It may be something that 
-# spammers often test. You can also hide the address on a web page to be picked
-# by spam spiders. Or simply parse your mail logs for an invalid address 
-# already being frequently targeted by spammers. Enable the address and 
-# redirect it to the blackhole. In Exim's alias file, you would add the 
-# following line (assuming the address is honeypot@yourdomain.com):
-#
-# honeypot:  :blackhole:
-#
-# For the SA: Action: silently tossed message... to be logged exim's SAdevnull option needs to be used.
-#
-# To this filter use the jail.local should contain in the right jail:
-#
-# filter = exim-spam[honeypot=honeypot@yourdomain.com]
-#
+## For the SA: Action: silently tossed message... to be logged exim's SAdevnull option needs to be used.

 [INCLUDES]

@@ -29,20 +13,10 @@ before = exim-common.conf
 failregex =  ^%(pid)s \S+ F=(<>|\S+@\S+) %(host_info)srejected by local_scan\(\): .{0,256}$
             ^%(pid)s %(host_info)sF=(<>|[^@]+@\S+) rejected RCPT [^@]+@\S+: .*dnsbl.*\s*$
             ^%(pid)s \S+ %(host_info)sF=(<>|[^@]+@\S+) rejected after DATA: This message contains a virus \(\S+\)\.\s*$
-             ^%(pid)s \S+ SA: Action: flagged as Spam but accepted: score=\d+\.\d+ required=\d+\.\d+ \(scanned in \d+/\d+ secs \| Message-Id: \S+\)\. From \S+ \(host=\S+ \[<HOST>\]\) for <honeypot>$
             ^%(pid)s \S+ SA: Action: silently tossed message: score=\d+\.\d+ required=\d+\.\d+ trigger=\d+\.\d+ \(scanned in \d+/\d+ secs \| Message-Id: \S+\)\. From \S+ \(host=(\S+ )?\[<HOST>\]\) for \S+$

 ignoreregex = 

-[Init]
-
-# Option:  honeypot
-# Notes.:  honeypot is an email address that isn't published anywhere that a
-#          legitimate email sender would send email too.
-# Values:  email address
-
-honeypot = trap@example.com
-
 # DEV Notes:
 # The %(host_info) defination contains a <HOST> match
 #
@@ -1,22 +0,0 @@
-# Fail2Ban configuration file for guacamole
-#
-# Author: Steven Hiscocks
-#
-
-[Definition]
-
-# Option: failregex
-# Notes.: regex to match the password failures messages in the logfile.
-# Values: TEXT
-#
-failregex = ^.*\nWARNING: Authentication attempt from <HOST> for user "[^"]*" failed\.$
-
-# Option:  ignoreregex
-# Notes.:  regex to ignore. If this regex matches, the line is ignored.
-# Values:  TEXT
-#
-ignoreregex = 
-
-[Init]
-# "maxlines" is number of log lines to buffer for multi-line regex searches
-maxlines = 2
@@ -1,17 +0,0 @@
-# Fail2ban filter for kerio
-
-[Definition]
-
-failregex = ^ SMTP Spam attack detected from <HOST>,
-            ^ IP address <HOST> found in DNS blacklist \S+, mail from \S+ to \S+$
-            ^ Relay attempt from IP address <HOST>
-            ^ Attempt to deliver to unknown recipient \S+, from \S+, IP address <HOST>$
-[Init]
-
-datepattern = ^\[%%d/%%b/%%Y %%H:%%M:%%S\]
-
-# DEV NOTES:
-# 
-# Author: A.P. Lawrence
-#
-# Based off: http://aplawrence.com/Kerio/fail2ban.html
@@ -1,9 +0,0 @@
-# Fail2Ban filter for monit.conf, looks for failed access attempts
-#
-#
-
-[Definition]
-
-failregex = ^\[[A-Z]+\s+\]\s*error\s*:\s*Warning:\s+Client '<HOST>' supplied unknown user '\w+' accessing monit httpd$
-            ^\[[A-Z]+\s+\]\s*error\s*:\s*Warning:\s+Client '<HOST>' supplied wrong password for user '\w+' accessing monit httpd$
-
@@ -34,13 +34,15 @@ __daemon_combs_re=(?:%(__pid_re)s?:\s+%(__daemon_re)s|%(__daemon_re)s%(__pid_re)
 # this can be optional (for instance if we match named native log files)
 __line_prefix=(?:\s\S+ %(__daemon_combs_re)s\s+)?

-failregex = ^%(__line_prefix)s( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: (view (internal|external): )?query(?: \(cache\))? '.*' denied\s*$
-            ^%(__line_prefix)s( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: zone transfer '\S+/AXFR/\w+' denied\s*$
-            ^%(__line_prefix)s( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: bad zone transfer request: '\S+/IN': non-authoritative zone \(NOTAUTH\)\s*$
+failregex = ^%(__line_prefix)s(\.\d+)?( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: (view (internal|external): )?query(?: \(cache\))? '.*' denied\s*$
+            ^%(__line_prefix)s(\.\d+)?( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: zone transfer '\S+/AXFR/\w+' denied\s*$
+            ^%(__line_prefix)s(\.\d+)?( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: bad zone transfer request: '\S+/IN': non-authoritative zone \(NOTAUTH\)\s*$

 # DEV Notes:
 # Trying to generalize the
 #          structure which is general to capture general patterns in log
 #          lines to cover different configurations/distributions
 #          
+# (\.\d+)? is a really ugly catch of the microseconds not captured in the date detector
+#
 # Author: Yaroslav Halchenko
@@ -4,7 +4,7 @@
 [Definition]


-failregex = ^ \[error\] \d+#\d+: \*\d+ user "\S+":? (password mismatch|was not found in ".*"), client: <HOST>, server: \S*, request: "\S+ \S+ HTTP/\d+\.\d+", host: "\S+"(, referrer: "\S+")?\s*$
+failregex = ^ \[error\] \d+#\d+: \*\d+ user "\S+":? (password mismatch|was not found in ".*"), client: <HOST>, server: \S+, request: "\S+ \S+ HTTP/\d+\.\d+", host: "\S+"\s*$

 ignoreregex = 

@@ -1,61 +0,0 @@
-# Fail2Ban configuration file
-# for Oracle IMS with XML logging
-#
-# Author: Joel Snyder/jms@opus1.com/2014-June-01
-#
-#
-
-
-[INCLUDES]
-
-# Read common prefixes.
-# If any customizations available -- read them from
-# common.local
-before = common.conf
-
-
-[Definition]
-
-# Option:  failregex
-# Notes.:  regex to match the password failures messages
-# in the logfile. The host must be matched by a
-# group named "host". The tag "<HOST>" can
-# be used for standard IP/hostname matching and is
-# only an alias for
-#          (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
-# Values:  TEXT
-#
-#
-# CONFIGURATION REQUIREMENTS FOR ORACLE IMS v6 and ABOVE:
-#
-# In OPTION.DAT you must have LOG_FORMAT=4 and
-#  bit 5 of LOG_CONNECTION must be set. 
-#
-# Many of these sub-fields are optional and can be turned on and off
-# by the system manager.  We need the "tr" field
-#  (transport information (present if bit 5 of LOG_CONNECTION is
-# set and transport information is available)).
-# "di" should be there by default if you have LOG_FORMAT=4.
-# Do not use "mi" as this is not included by default.
-#
-# Typical line IF YOU ARE USING TAGGING ! ! ! is:
-# <co ts="2014-06-02T09:45:50.29" pi="123f.3f8.4397"
-# sc="tcp_local" dr="+" ac="U"
-# tr="TCP|192.245.12.223|25|151.1.71.144|59762" ap="SMTP"
-# mi="Bad password"
-# us="01ko8hqnoif09qx0np@imap.opus1.com"
-# di="535 5.7.8 Bad username or password (Authentication failed)."/>
-# Format is generally documented in the PORT_ACCESS mapping 
-# at http://docs.oracle.com/cd/E19563-01/819-4428/bgaur/index.html
-#
-# All that would be on one line.
-# Note that you MUST have LOG_FORMAT=4 for this to work!
-#
-
-failregex = ^.*tr="[A-Z]+\|[0-9.]+\|\d+\|<HOST>\|\d+" ap="[^"]*" mi="Bad password" us="[^"]*" di="535 5.7.8 Bad username or password( \(Authentication failed\))?\."/>$
-
-# Option:  ignoreregex
-# Notes.:  regex to ignore. If this regex matches, the line is ignored.
-# Values:  TEXT
-#
-ignoreregex =
@@ -11,9 +11,4 @@ _daemon = postfix/smtpd

 failregex = ^%(__prefix_line)swarning: [-._\w]+\[<HOST>\]: SASL (?:LOGIN|PLAIN|(?:CRAM|DIGEST)-MD5) authentication failed(: [ A-Za-z0-9+/]*={0,2})?\s*$

-[Init]
-
-journalmatch = _SYSTEMD_UNIT=postfix.service
-
-
 # Author: Yaroslav Halchenko
@@ -19,8 +19,4 @@ failregex = ^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 554 5\.7

 ignoreregex = 

-[Init]
-
-journalmatch = _SYSTEMD_UNIT=postfix.service
-
 # Author: Cyril Jaquier
@@ -15,7 +15,7 @@ before = common.conf
 _daemon = pure-ftpd

 # Error message specified in multiple languages
-__errmsg = (?:Godkendelse mislykkedes for \[.*\]|Authentifizierung fehlgeschlagen für Benutzer \[.*\].|Authentication failed for user \[.*\]|Autentificación fallida para el usuario \[.*\]|\[.*\] c'est un batard, il connait pas son code|Erreur d'authentification pour l'utilisateur \[.*\]|Azonosítás sikertelen \[.*\] felhasználónak|Autenticazione falita per l'utente \[.*\]|Autorisatie faalde voor gebruiker \[.*\]|Godkjennelse mislyktes for \[.*\]|\[.*\] kullanýcýsý için giriþ hatalý|Autenticação falhou para usuário \[.*\]|Autentificare esuata pentru utilizatorul \[.*\]|Autentifikace uživatele selhala \[.*\]|Autentyfikacja nie powiodła się dla użytkownika \[.*\]|Autentifikacia uzivatela zlyhala \[.*\]|Behörighetskontroll misslyckas för användare \[.*\]|Авторизация не удалась пользователю \[.*\]|\[.*\] 嶸盪 檣隸 褒ぬ|妏蚚氪\[.*\]桄痐囮啖|使用者\[.*\]驗證失敗)
+__errmsg = (?:�ϥΪ�\[.*\]���ҥ���|ʹ����\[.*\]��֤ʧ��|\[.*\] kullan�c�s� i�in giri� hatal�|����������� �� ������� ������������ \[.*\]|Godkjennelse mislyktes for \[.*\]|Beh�righetskontroll misslyckas f�r anv�ndare \[.*\]|Autentifikacia uzivatela zlyhala \[.*\]|Autentificare esuata pentru utilizatorul \[.*\]|Autentica��o falhou para usu�rio \[.*\]|Autentyfikacja nie powiod�a si� dla u�ytkownika \[.*\]|Autorisatie faalde voor gebruiker \[.*\]|\[.*\] ��� ���� ����|Autenticazione falita per l'utente \[.*\]|Azonos�t�s sikertelen \[.*\] felhaszn�l�nak|\[.*\] c'est un batard, il connait pas son code|Erreur d'authentification pour l'utilisateur \[.*\]|Autentificaci�n fallida para el usuario \[.*\]|Authentication failed for user \[.*\]|Authentifizierung fehlgeschlagen f�r Benutzer \[.*\].|Godkendelse mislykkedes for \[.*\]|Autentifikace u�ivatele selhala \[.*\])

 failregex = ^%(__prefix_line)s\(.+?@<HOST>\) \[WARNING\] %(__errmsg)s\s*$

@@ -24,13 +24,7 @@ ignoreregex =
 # Author: Cyril Jaquier
 # Modified: Yaroslav Halchenko for pure-ftpd
 # Documentation thanks to Blake on http://www.fail2ban.org/wiki/index.php?title=Fail2ban:Community_Portal
-# UTF-8 editing and mechanism thanks to Johannes Weberhofer
 #
 # Only logs to syslog though facility can be changed configuration file/command line
 #
-# To get messages in the right encoding:
-# grep MSG_AUTH_FAILED_LOG pure-ftpd-1.0.36/src/messages_[defhint]* | grep -Po '".?"' | recode latin1..utf-8 | tr -d '"' > messages
-# grep MSG_AUTH_FAILED_LOG pure-ftpd-1.0.36/src/messages_[pr][to] | grep -Po '".?"' | recode latin1..utf-8 | tr -d '"' >> messages
-# grep MSG_AUTH_FAILED_LOG pure-ftpd-1.0.36/src/messages_[cps][slkv] | grep -Po '".?"' | recode latin2..utf-8 | tr -d '"' >> messages
-# grep MSG_AUTH_FAILED_LOG pure-ftpd-1.0.36/src/messages_ru | grep -Po '".?"' | recode KOI8-R..utf-8 | tr -d '"' >> messages
-# grep MSG_AUTH_FAILED_LOG pure-ftpd-1.0.36/src/messages_[kz] | grep -Po '".*?"' | tr -d '"' | recode big5..utf-8 >> messages
+# fgrep -r MSG_AUTH_FAILED_LOG pure-ftpd-1.0.36/src
@@ -21,16 +21,12 @@ before = common.conf

 [Definition]

-_daemon = fail2ban\.actions\s*
+_daemon = fail2ban\.actions

 # The name of the jail that this filter is used for. In jail.conf, name the 
 # jail using this filter 'recidive', or change this line!
 _jailname = recidive

-failregex = ^(%(__prefix_line)s| %(_daemon)s%(__pid_re)s?:\s+)NOTICE\s+\[(?!%(_jailname)s\])(?:.*)\]\s+Ban\s+<HOST>\s*$
-
-[Init]
-
-journalmatch = _SYSTEMD_UNIT=fail2ban.service PRIORITY=5
+failregex = ^(%(__prefix_line)s|,\d{3} fail2ban.actions%(__pid_re)s?:\s+)WARNING\s+\[(?!%(_jailname)s\])(?:.*)\]\s+Ban\s+<HOST>\s*$

 # Author: Tom Hendrikx, modifications by Amir Caspi 
@@ -9,7 +9,7 @@ before = common.conf

 [Definition]

-failregex = ^\s*(\[\])?(%(__hostname)s roundcube: IMAP Error)?: (FAILED login|Login failed) for .*? from <HOST>(\. .* in .*?/rcube_imap\.php on line \d+ \(\S+ \S+\))?$
+failregex = ^\s*(\[(\s[+-][0-9]{4})?\])?(%(__hostname)s roundcube: IMAP Error)?: (FAILED login|Login failed) for .*? from <HOST>(\. .* in .*?/rcube_imap\.php on line \d+ \(\S+ \S+\))?$

 ignoreregex = 
 # DEV Notes:
@@ -19,32 +19,16 @@ before = common.conf

 [Definition]

-_daemon = (?:(sm-(mta|acceptingconnections)|sendmail))
+_daemon = (?:sm-(mta|acceptingconnections))

 failregex = ^%(__prefix_line)s\w{14}: ruleset=check_rcpt, arg1=(?P<email><\S+@\S+>), relay=(\S+ )?\[<HOST>\]( \(may be forged\))?, reject=(550 5\.7\.1 (?P=email)\.\.\. Relaying denied\. (IP name possibly forged \[(\d+\.){3}\d+\]|Proper authentication required\.|IP name lookup failed \[(\d+\.){3}\d+\])|553 5\.1\.8 (?P=email)\.\.\. Domain of sender address \S+ does not exist|550 5\.[71]\.1 (?P=email)\.\.\. (Rejected: .*|User unknown))$
            ^%(__prefix_line)sruleset=check_relay, arg1=(?P<dom>\S+), arg2=<HOST>, relay=((?P=dom) )?\[(\d+\.){3}\d+\]( \(may be forged\))?, reject=421 4\.3\.2 (Connection rate limit exceeded\.|Too many open connections\.)$
            ^%(__prefix_line)s\w{14}: rejecting commands from  (\S+ )?\[<HOST>\] due to pre-greeting traffic after \d+ seconds$
            ^%(__prefix_line)s\w{14}: (\S+ )?\[<HOST>\]: ((?i)expn|vrfy) \S+ \[rejected\]$
-            ^(?P<__prefix>%(__prefix_line)s\w+: )<[^@]+@[^>]+>\.\.\. No such user here<SKIPLINES>(?P=__prefix)from=<[^@]+@[^>]+>, size=\d+, class=\d+, nrcpts=\d+, bodytype=\w+, proto=E?SMTP, daemon=MTA, relay=\S+ \[<HOST>\]$


 ignoreregex =

-
-[Init]
-
-# "maxlines" is number of log lines to buffer for multi-line regex searches
-maxlines = 10
-
-# DEV NOTES:
-# 
-# Regarding the last multiline regex:
-#
-# There can be a nunber of non-related lines between the first and second part
-# of this regex maxlines of 10 is quite generious. Only one of the 
-# "No such user" lines needs to be matched before the line with the HOST.
-#
-# Note the capture __prefix, includes both the __prefix_lines (which includes
-# the sendmail PID), but also the \w+ which the the sendmail assigned mail ID.
+# DEV Notes:
 #
 # Author: Daniel Black and Fabian Wenk
@@ -1,4 +1,4 @@
-# Fail2Ban filter for unsuccessful solid-pop3 authentication attempts
+# Fail2Ban filter for unsuccesful solid-pop3 authentication attempts
 #
 # Doesn't currently provide PAM support as PAM log messages don't include rhost as
 # remote IP.
@@ -1,13 +0,0 @@
-
-[Definition]
-
-failregex = ^ \[LOGIN_ERROR\].*from <HOST>: Unknown user or password incorrect\.$
-
-
-[Init]
-
-datepattern = ^%%m/%%d/%%Y %%H:%%M:%%S
-
-# DEV NOTES:
-#
-# Author: Daniel Black
@@ -22,8 +22,4 @@ failregex = ^%(__prefix_line)sDid not receive identification string from <HOST>\

 ignoreregex = 

-[Init]
-
-journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
-
 # Author: Yaroslav Halchenko
@@ -1,12 +1,5 @@
 # Fail2Ban filter for openssh
 #
-# If you want to protect OpenSSH from being bruteforced by password
-# authentication then get public key authentication working before disabling
-# PasswordAuthentication in sshd_config.
-#
-#
-# "Connection from <HOST> port \d+" requires LogLevel VERBOSE in sshd_config
-#

 [INCLUDES]

@@ -14,6 +7,7 @@
 # common.local
 before = common.conf

+
 [Definition]

 _daemon = sshd
@@ -30,19 +24,9 @@ failregex = ^%(__prefix_line)s(?:error: PAM: )?[aA]uthentication (?:failure|erro
            ^%(__prefix_line)sReceived disconnect from <HOST>: 3: \S+: Auth fail$
            ^%(__prefix_line)sUser .+ from <HOST> not allowed because a group is listed in DenyGroups\s*$
            ^%(__prefix_line)sUser .+ from <HOST> not allowed because none of user's groups are listed in AllowGroups\s*$
-            ^(?P<__prefix>%(__prefix_line)s)User .+ not allowed because account is locked<SKIPLINES>(?P=__prefix)(?:error: )?Received disconnect from <HOST>: 11: .+ \[preauth\]$
-            ^(?P<__prefix>%(__prefix_line)s)Disconnecting: Too many authentication failures for .+? \[preauth\]<SKIPLINES>(?P=__prefix)(?:error: )?Connection closed by <HOST> \[preauth\]$
-            ^(?P<__prefix>%(__prefix_line)s)Connection from <HOST> port \d+(?: on \S+ port \d+)?<SKIPLINES>(?P=__prefix)Disconnecting: Too many authentication failures for .+? \[preauth\]$

 ignoreregex = 

-[Init]
-
-# "maxlines" is number of log lines to buffer for multi-line regex searches
-maxlines = 10
-
-journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
-
 # DEV Notes:
 #
 #   "Failed \S+ for .*? from <HOST>..." failregex uses non-greedy catch-all because
@@ -51,4 +35,3 @@ journalmatch = _SYSTEMD_UNIT=sshd.service + _COMM=sshd
 #   matched away first.
 #
 # Author: Cyril Jaquier, Yaroslav Halchenko, Petr Voralek, Daniel Black
-
@@ -1,11 +0,0 @@
-# Fail2ban filter for stunnel
-
-[Definition]
-
-failregex = ^ LOG\d\[\d+:\d+\]:\ SSL_accept from <HOST>:\d+ : (?P<CODE>[\dA-F]+): error:(?P=CODE):SSL routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate$
-
-# DEV NOTES:
-# 
-# Author: Daniel Black
-#
-# Based off: http://www.fail2ban.org/wiki/index.php/Fail2ban:Community_Portal#stunnel4
@@ -1,21 +0,0 @@
-# Fail2Ban filter for Tine 2.0 authentication
-#
-# Enable logging with:
-# $config['info_log']='/var/log/tine20/tine20.log';
-#
-
-[Definition]
-
-failregex =  ^[\da-f]{5,} [\da-f]{5,} (-- none --|.*?)( \d+(\.\d+)?(h|m|s|ms)){0,2} -  WARN \(\d+\): Tinebase_Controller::login::\d+ Login with username .*? from <HOST> failed \(-[13]\)!$
-
-ignoreregex = 
-
-# Author: Mika (mkl) from Tine20.org forum: https://www.tine20.org/forum/viewtopic.php?f=2&t=15688&p=54766
-# Editor: Daniel Black
-# Advisor: Lars Kneschke
-#
-# Usernames can contain spaces.
-#
-# Authentication: http://git.tine20.org/git?p=tine20;a=blob;f=tine20/Tinebase/Controller.php#l105
-# Logger: http://git.tine20.org/git?p=tine20;a=blob;f=tine20/Tinebase/Log/Formatter.php
-# formatMicrotimeDiff: http://git.tine20.org/git?p=tine20;a=blob;f=tine20/Tinebase/Helper.php#l276
@@ -1,63 +0,0 @@
-# Common
-#
-
-[INCLUDES]
-
-after  = paths-overrides.local
-
-[DEFAULT]
-
-sshd_log = %(syslog_authpriv)s
-
-dropbear_log = %(syslog_authpriv)s
-
-# There is no sensible generic defaults for syslog log targets, thus
-# leaving them empty here so that no errors while parsing/interpolating configs
-syslog_daemon =
-syslog_ftp =
-syslog_local0 =
-syslog_mail_warn =
-syslog_user =
-
-# from /etc/audit/auditd.conf
-auditd_log = /var/log/audit/audit.log
-
-exim_main_log = /var/log/exim/mainlog
-
-nginx_error_log = /var/log/nginx/error.log
-
-nginx_access_log = /var/log/nginx/access.log
-
-
-lighttpd_error_log = /var/log/lighttpd/error.log
-
-# http://www.hardened-php.net/suhosin/configuration.html#suhosin.log.syslog.facility
-# syslog_user is the default. Lighttpd also hooks errors into its log.
-
-suhosin_log = %(syslog_user)s %(lighttpd_error_log)s
-
-# defaults to ftp or local2 if ftp doesn't exist
-proftpd_log = %(syslog_ftp)s
-
-# http://svnweb.freebsd.org/ports/head/ftp/proftpd/files/patch-src_proftpd.8.in?view=markup
-# defaults to ftp but can be overwritten.
-pureftpd_log = %(syslog_ftp)s
-
-# ftp, daemon and then local7 are tried at configure time however it is overwriteable at configure time
-#
-wuftpd_log = %(syslog_ftp)s
-
-# syslog_enable defaults to no. so it defaults to vsftpd_log_file setting of /var/log/vsftpd.log
-# No distro seems to set it to syslog by default
-# If syslog set it defaults to ftp facility if exists at compile time otherwise falls back to daemonlog.
-vsftpd_log = /var/log/vsftpd.log
-
-# Technically syslog_facility in main.cf can overwrite but no-one sane does this.
-postfix_log = %(syslog_mail_warn)s
-
-dovecot_log = %(syslog_mail_warn)s
-
-# Seems to be set at compile time only to LOG_LOCAL0 (src/const.h) at Notice level
-solidpop3d_log = %(syslog_local0)s
-
-mysql_log = %(syslog_daemon)s
@@ -1,40 +0,0 @@
-# Debian
-
-[INCLUDES]
-
-before = paths-common.conf
-
-after  = paths-overrides.local
-
-
-[DEFAULT]
-
-syslog_mail = /var/log/mail.log
-
-syslog_mail_warn = /var/log/mail.warn
-
-syslog_authpriv = /var/log/auth.log
-
-# syslog_auth = /var/log/auth.log
-#
-syslog_user  =  /var/log/user.log
-
-syslog_ftp = /var/log/syslog
-
-syslog_daemon =  /var/log/daemon.log
-
-syslog_local0 =  /var/log/messages
-
-
-apache_error_log = /var/log/apache2/*error.log
-
-apache_access_log = /var/log/apache2/*access.log
-
-exim_main_log = /var/log/exim4/mainlog
-
-# was in debian squeezy but not in wheezy
-# /etc/proftpd/proftpd.conf (SystemLog)
-proftpd_log = /var/log/proftpd/proftpd.log
-
-
-
@@ -1,37 +0,0 @@
-# Fedora
-
-[INCLUDES]
-
-before = paths-common.conf
-
-after  = paths-overrides.local
-
-
-[DEFAULT]
-
-syslog_mail = /var/log/maillog
-
-syslog_mail_warn = /var/log/maillog
-
-syslog_authpriv = /var/log/secure
-
-syslog_user =  /var/log/messages
-
-syslog_ftp  = /var/log/messages
-
-syslog_daemon  = /var/log/messages
-
-syslog_local0  = /var/log/messages
-
-
-apache_error_log = /var/log/httpd/*error_log
-
-apache_access_log = /var/log/httpd/*access_log
-
-# /etc/proftpd/proftpd.conf (ExtendedLog for Anonymous)
-# proftpd_log = /var/log/proftpd/auth.log
-# Tested and it worked out in /var/log/messages so assuming syslog_ftp for now.
-
-exim_main_log = /var/log/exim/main.log
-
-mysql_log = /var/lib/mysql/mysqld.log
@@ -1,46 +0,0 @@
-# FreeBSD
-
-[INCLUDES]
-
-before = paths-common.conf
-
-after  = paths-overrides.local
-
-
-[DEFAULT]
-
-# http://www.freebsd.org/doc/handbook/configtuning-syslog.html
-#
-syslog_mail = /var/log/maillog
-
-syslog_mail_warn = /var/log/maillog
-
-syslog_authpriv = /var/log/auth.log
-
-# note - is only ftp.info - if notice /var/log/messages may be needed
-syslog_ftp = /var/log/xferlog
-
-syslog_daemon = /var/log/messages
-
-syslog_local0 = /var/log/messages
-
-# Linux things
-# we fake to avoid parse error in startups
-
-auditd_log = /dev/null
-
-# http://svnweb.freebsd.org/ports/head/www/apache24/files/patch-docs__conf__extra__httpd-ssl.conf.in?view=markup
-# http://svnweb.freebsd.org/ports/head/www/apache22/files/patch-docs__conf__extra__httpd-ssl.conf.in?view=markup
-# http://svnweb.freebsd.org/ports/head/www/apache24/files/patch-config.layout
-# http://svnweb.freebsd.org/ports/head/www/apache22/files/patch-config.layout
-
-apache_error_log = /usr/local/www/logs/*error[_.]log
-
-apache_access_log = /usr/local/www/logs/*access[_.]log
-
-# http://svnweb.freebsd.org/ports/head/www/nginx/Makefile?view=markup
-
-nginx_error_log = /var/log/nginx-error.log
-
-nginx_access_log = /var/log/nginx-access.log
-
@@ -1,27 +0,0 @@
-# OSX
-#
-
-[INCLUDES]
-
-before = paths-common.conf
-
-after  = paths-overrides.local
-
-
-[DEFAULT]
-
-syslog_mail = /var/log/mail.log
-
-syslog_mail_warn = /var/log/mail.warn
-
-syslog_authpriv = /var/log/secure.log
-#syslog_auth = 
-
-#syslog_user = 
-
-#syslog_ftp = 
-
-#syslog_daemon = 
-
-#syslog_local0 =
-
@@ -1,79 +0,0 @@
-fail2ban (0.9.0+git48-gabcab00-1) experimental; urgency=low
-
-  [ Yaroslav Halchenko ]
-  * This version went through big refactoring which allowed to gain new
-    features such as multiline matching (see upstream's changelog for more
-    information).
-  * Although .local files are still supported, customizations are advised
-    to be provided under corresponding .d/ directories.  E.g. see
-    /etc/fail2ban/jail.d/defaults-debian.conf which is where now sshd
-    jail is enabled by default to match previous behavior of Fail2Ban in
-    Debian.
-
-  [ Daniel Schaal ]
-  * All jails definitions were rewritten to become more concise and uniform.
-    From this version on log paths are defined in distro specific files,
-    for Debian this is in /etc/fail2ban/paths-debian.conf.
-
- -- Yaroslav Halchenko <debian@onerussian.com>  Tue, 25 Mar 2014 08:38:31 -0400
-
-fail2ban (0.8.11-1) unstable; urgency=low
-
-  * retroactive for 0.8.9: by default iptables-* actions do not simply
-    DROP packets from offending IP but rather reject with
-    icmp-port-unreachable.  If DROP behaviour is preferable, provide
-    config/action.d/iptables-blocktype.local with [Init] section defining
-    blocktype = DROP or override action definition to provide
-    blocktype=DROP option in jail.local
-  * Many failregex's were tight-up in this release which could
-    theoretically effect operation in comparison to previous release(s).
-
- -- Yaroslav Halchenko <debian@onerussian.com>  Sat, 16 Nov 2013 22:27:50 -0500
-
-fail2ban (0.8.4-3) unstable; urgency=low
-
-  * Jail named-refused-udp is unsafe and opens possibility for easy DoS,
-    thus discouraged to be used, and commented out (see #583364 for more
-    information).
-
- -- Yaroslav Halchenko <debian@onerussian.com>  Mon, 28 Jun 2010 22:12:22 -0400
-
-fail2ban (0.7.1-0.2) unstable; urgency=low
-
-  fail2ban 0.7 is a complete rewrite of the 0.6 version, and if you
-  customized any of provided configuration or startup files
-  (/etc/default/fail2ban, /etc/fail2ban.conf, /etc/init.d/fail2ban),
-  please read further. The configuration scheme has changed upstream:
-  0.7 ignores /etc/fail2ban.conf and instead uses a split configuration
-  under /etc/fail2ban/. To retain your customizations, for example to
-  monitor anything other than sshd, you will need to set them under that
-  new directory; use *.local files for customizations. Please see
-  /usr/share/doc/fail2ban/README.Debian.gz and
-  http://fail2ban.sourceforge.net for further description of new
-  configuration scheme. Detailed documentation is under development (see
-  #400416).  When you are satisfied with the new settings, please delete
-  /etc/fail2ban.conf to avoid confusion.
-
-  Fail2ban 0.7 uses client/server architecture and fail2ban-client is to
-  substitute fail2ban command to provide an interface between the user and
-  fail2ban-server. That is why some command line parameters present in
-  fail2ban 0.6 are invalid in fail2ban-client. Such change affects
-  /etc/default/fail2ban; you should review that file if you customized it.
-  Please enable sections as directed in README.Debian.gz mentioned above.
-  You must use newly shipped init.d/fail2ban, or otherwise fail2ban will
-  not start.
-
-  This note was rewritten in release 0.7.5-2 to clarify its meaning.
-
- -- Yaroslav Halchenko <debian@onerussian.com>  Sat,  9 Dec 2006 18:24:36 -0500
-
-fail2ban (0.6.0-4) unstable; urgency=low
-
-  In this version the new section ApacheAttacks was introduced to ban IPs
-  which are found to run some known attack on the host. For now it captures
-  just awstats and mambo related attacks. To make this feature work, the bug of
-  wrongly specified timeregexp for Apache's access.log file was fixed.
-  Besides that group of log files has changed to be adm, and now they are
-  readable by the group.
-
- -- Yaroslav Halchenko <debian@onerussian.com>  Fri, 10 Feb 2006 13:05:07 -0500
@@ -1,234 +0,0 @@
-fail2ban (>=0.7.0) for Debian
-----------------------------
-
-This package is ~99% identical to the upstream version. Few features
-could have been added but not yet propagated into upstream version and
-some modifications might be Debian-specific. Debian specific jail.conf
-file is shipped. Original upstream file is available from
-/usr/share/doc/fail2ban/examples/jail.conf
-
-Currently, the major difference with upstream: python libraries are
-placed under /usr/share/fail2ban instead of /usr/lib/fail2ban to
-comply with policy regarding architecture independent resources.
-
-Upgrade from 0.6 versions:
-------------------------
-
-* New Config Files Format:
-
-If you had introduced your own sections in /etc/fail2ban.conf, you
-would need manually to convert them into a new format. At minimum you
-need to create /etc/fail2ban/filter.d/NAME.local (leave .conf files
-for me and upstream please to avoid any conflicts -- introduce your
-changes in .local) with failregex in [Definition] section. And provide
-appropriate jail definition in /etc/fail2ban/jail.local
-
-
-* Enabled Sections:
-
-Only handling of ssh files is enabled by default. If you want to use
-fail2ban with apache, please enable apache section manually in
-/etc/fail2ban/jail.local by including next lines:
-
-[apache]
-enabled = true
-
-NOTE: -e command line parameter is non existant in 0.7.x
-
-
-* Interpolations vs actions/filters parameters:
-
-For details see #398739 or wait for a closure of #400416
-
-Every pair of .conf and then .local (if exists) files is read
-separately from any other configuration file, so interpolations cannot
-penetrate from jail.* into actions.d/*. To overcome this, it is
-necessary to create a PARAMETER which can be substituted in actions
-[Definition] section, if it is also defined in the [Init] section of
-that file and is used in place of necessary allocation as <PARAMETER>
-tag. Parameters can be specified in the definitions within
-jail.{conf,local}. For instance, 1 lengthy example, where the same
-name "fwchain" is used both as interpolation (in jail.local) and as a
-parameter (in iptables-flex.local) (from #398739)
-
-==> /etc/fail2ban/jail.local <==
-[DEFAULT]
-action = iptables-flex[name=%(__name__)s, port=%(port)s, fwchain=%(fwchain)s, post_start_commands=%(post_start_commands)s, pre_end_commands=%(pre_end_commands)s]
-fwchain = INPUT
-[ssh]
-fwchain = ssh-tarpit
-==> /etc/fail2ban/action.d/iptables-flex.local <==
-[Definition]
-actionstart = iptables -N fail2ban-<name>
-               iptables -I <fwchain> -m state --state NEW -p <protocol> --dport <port> -j fail2ban-<name>
-               iptables -I <fwchain> -j <whitelist>
-actionstop  = iptables -D <fwchain> -j <whitelist>
-               iptables -D <fwchain> -m state --state NEW -p <protocol> --dport <port> -j fail2ban-<name>
-               iptables -F fail2ban-<name>
-               iptables -X fail2ban-<name>
-actioncheck = iptables -n -L <fwchain> | grep -q fail2ban-<name>
-actionban   = iptables -I fail2ban-<name> 1 -s <ip> -j DROP
-actionunban = iptables -D fail2ban-<name> -s <ip> -j DROP
-[Init]
-whitelist = ssh-whitelist
-fwchain = INPUT
-name = default
-port = ssh
-protocol = tcp
-
-
-* Multiport banning: Comment for #373592, #545971
-
-iptables-multiport action is now default banaction (file jail.conf, to
-be customized within jail.local). Therefore assure that you have built
-multiport module if you use custom kernel.
-
-If you would like to ban all ports for that host, just redefine
-fwban/fwunban commands to don't have --dport %(port)s statement at
-all, or use shorewall, where actionban bans whole IP.
-
-* Blocking of NEW connections only
-Comment for the wishlist #350746.
-
-It might be benefitial in some cases to ban only new connections. For
-that just use iptables-new action instead of default banaction
-
-/etc/fail2ban/jail.local:
-
-[DEFAULT]
-banaction=iptables-new
-
-(you can override banaction within interesting for you section).
- Also you can redefine the whole action parameter if you like.
-
-
-* Interaction with ipmasq
-  Comment to #461417
-
-Although fail2ban should detect and recreate missing chains if the external
-command wipes out iptables, it is better to explicitly to force-reload
-fail2ban. For this reason there is examples/ipmasq-ZZZzzz|fail2ban.rul file is
-shipped along to be installed under name ZZZzzz|fail2ban.rul within
-/etc/ipmasq.
-
-* Interaction with logrotate with custom logtarget
-  Comment to #631917
-
-if you use an alternative logtarget (e.g. SYSLOG) thus not using
-/var/log/fail2ban.log you should divert logrotate configuration into
-a disabled state, e.g.
-
-sudo dpkg-divert --rename --divert \
-	 /etc/logrotate.d/fail2ban.disabled /etc/logrotate.d/fail2ban
-
-
-Troubleshooting:
---------------
-
-* Updated failregex:
-
-To resolve the security bug #330827 [1] failregex expressions must
-provide a named group (?P<host>...) as a placeholder of the abuser's
-host. Alternative tag (since 0.7.5) can be "<HOST>". The naming of the
-group was introduced to capture possible future generalizations of
-failregex to provide even more information.
-
-[1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=330827
-
-You might benefit from using fail2ban-regex command shipped along to
-construct and debug your failregex statements.
-
-* "Interpolations" in the config file:
-
-Since version 0.6.0-3 to reduce duplication, thus to improve
-readability of the config file, interpolations provided by the module
-ConfigParser are used. If you had custom sections defined before, you
-might benefit from updating config file and adding appropriate
-information for the new sections.
-
-N.B. If you have some nice additional sections defined, I would really
-appreciate if you share them with me or upstream author, so they could
-be eventually included in the fail2ban package for general use by the
-rest of the community.
-
-
-* Mailing:
-
-Since actions.d/mail*.conf commands rely on presence of "mail"
-command, mailx package (or another package providing mailx
-functionality such as mailutils) is required if those actions are
-activated in jail.{conf,local}.
-
-
-* Dirty exit:
-
-If firewall rules gets cleaned out before fail2ban exits (like was
-happening with firestarter), errors get reported during the exit of
-fail2ban, but they are "safe" and can be ignored.
-
-
-** SSHD Configuration Specific Problems
-
-* Ban "Not allowed" attempts:
-
-Make sure that you have
-ChallengeResponseAuthentication no
-PasswordAuthentication yes
-
-Details from the bug report #350980 [2]
-
-[2]  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=350980
-
-
-* Not caught attempts to login as root
-
-On the boxes running older versions of openssh (e.g. sarge
-distribution) in the case when PermitRootLogin is set to something
-else than "yes" and iff AllowUsers is active, failed root logins do
-not confirm to the standard logging message -- they omit the source
-IP, thus allowing attack to persist since such messages are not caught
-by fail2ban.
-
-
-* Bantime:
-
-An IP is banned for "bantime" not since the last failed login attempt
-from the IP, but rather since the moment when failed login was
-detected by fail2ban. Thus, if fail2ban gets [re]started, any IP which
-had enough of failed logins with durations less than "findtime" between
-them prior to the [re]start moment, will be banned for
-"bantime" since [re]start moment, not since the last failed login
-time.
-
-* Findtime:
-
-"Findtime" option of a jail actually defines a duration to reset the
-counter of failed login attempts, if no new attempt was detected within
-that time frame (i.e.  within "findtime").
-
-See
-http://www.fail2ban.org/wiki/index.php/MANUAL_0_8#Jail_Options
-for more information on jail options.
-
-
-* Syslog entries can be 'forged' by a regular user
-
-From
-http://www.fail2ban.org/wiki/index.php/MANUAL_0_8#Possibility_of_DOS_attack_by_a_local_user
-
-Especially on systems wich provide ssh/CGI/PHP services to unknown
-users it is possible to block other users from ssh and probably other
-access as a unprivileged user may issue:
-
-logger -p auth.warning -t 'sshd[123]' 'Illegal user user1 from 1.2.3.4'
-
-N.B. chmod o-x /usr/bin/logger should provide at least obfuscation
-solution
-
-Or the malicious user may write via PHP's openlog()/syslog() to syslog.
-
-P.S. Anyone is welcome to recommend proper security solution to this
-issue, such as an alternative to sysklogd which allows better control
-over users logging to specific facilities (such as AUTH)
-
- -- Yaroslav Halchenko <debian@onerussian.com>, Thu, 28 Jul 2011 23:19:44 -0400
@@ -1,6 +0,0 @@
-* Collect more sections for other log files
-* Find proper answer to "Syslog entries can be 'forged' by a regular
-   user" mentioned in README.Debian
-
- -- Yaroslav O. Halchenko <debian@onerussian.com>  Wed,  6 Dec 2006 22:14:26 -0500
-
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Yaroslav Halchenko	254b57e43b	Version changes/man pages for the release	2014-08-19 16:23:33 -04:00
Yaroslav Halchenko	f39c778a97	changelog and thanks for the preceding fix	2014-07-28 12:46:52 -04:00
Jisoo Park	094b0e651a	Fix sieve filter to use correct option	2014-07-28 12:44:42 -04:00
Steven Hiscocks	09b2016c05	TST: Skip SYSLOG log target test if '/dev/log' not present Conflicts: testcases/servertestcase.py -- probably jumped over another commit in this cherry-pick which resulted in conflict	2014-04-24 12:24:57 -04:00
Steven Hiscocks	3a1a1f3ad7	Merge branch 'yarikoptic/bf/recidive-mail' into 0.8 Conflicts: ChangeLog - Additions in both branches kept	2014-04-18 23:00:46 +01:00
Yaroslav Halchenko	5edc60934d	DOC: a note in TODO to refer to issues	2014-04-18 10:11:57 -04:00
Yaroslav Halchenko	4fea9dde8d	DOC: minor (just to trigger rebuild)	2014-04-17 23:22:17 -04:00
Yaroslav Halchenko	c82eb16f3d	DOC: minor changes just to trigger the build	2014-04-17 14:41:14 -04:00
yungchin	dbf6cff032	Update comments in shorewall.conf for new settings	2014-04-17 12:06:16 -04:00
Yaroslav Halchenko	30bc782b18	BF: grep in mail*-whois-lines.conf also matches beginning/end of line to work with the recidive filter (Debian #744774 ) Thanks James Bottomley for the report and tentative solutions	2014-04-16 22:20:22 -04:00
Steven Hiscocks	b89222b1d1	Merge pull request #696 from yarikoptic/bf/skip_apache_subsecond_resolution_on_2.5 BF(2.5): add minimal_python key to failJSON and skip some test lines.	2014-04-16 22:43:28 +01:00
Steven Hiscocks	2874399fed	Merge pull request #694 from yarikoptic/bf/fix_move_test a collection of fixes, including the one log rotation detection which "broke travis"	2014-04-16 22:28:42 +01:00
Yaroslav Halchenko	5bafc61e48	ENH(TST): relax test of sleep to "1" places from "2" The reason is that internally it does round, so even 1.005 then would not be equal to 1. Making it spaces==1 should be sufficient for up to 1.05 i.e. we would allow 50ms "drift"	2014-04-16 13:17:58 -04:00
Yaroslav Halchenko	d7087412bb	Add .dev suffix to the version to signal "development" build	2014-04-16 13:12:39 -04:00
Yaroslav Halchenko	c5a754411d	BF(2.5): add minimal_python key to failJSON and skip some test lines with date format which includes sub-seconds For tests to pass also duplicated representative ones just without subsec timing	2014-04-16 10:51:24 -04:00
Yaroslav Halchenko	8faff41d40	DOC: changelog entry on leaky file descriptors	2014-04-16 08:48:52 -04:00
Yaroslav Halchenko	6eb67899a5	BF: overcome problem with failed *_movefile test if file gets properly closed Discussion is in the comments on `7260403fdd` and fix consists of skipping first 3 lines while creating a "new" log file. This should be sufficient to make fail2ban detect "log rotation" and thus function properly	2014-04-16 08:43:54 -04:00
Yaroslav Halchenko	dfc7dd6dc9	ENH: use unique filename in LogFileFilterPoll on every setUp call	2014-04-16 08:26:39 -04:00
Yaroslav Halchenko	e19f9e1697	BF(?): stop/join notifier only if defined Somehow on that elderly squeeze Debian sparc box, I got error that self.__notifier was not defined. So first I did define it now in the constructor, but mystery remains how come it was not defined -- wasn"t run() then run (where it is defined)? Anyways -- conditioning on it being defined might be safer may be? Not sure (need to go to sleep) if with this change but on this box I also run from time to time either into stalling of fail2ban-testcases and refusing to exit normally or ====================================================================== ERROR: test_move_into_file_after_removed (testcases.filtertestcase.MonitorFailures<FilterPyinotify>(/tmp/monitorfailures_FilterPyinotifypcHmMJfail2ban)) ---------------------------------------------------------------------- Traceback (most recent call last): File "/home/yoh/deb/gits/fail2ban/testcases/filtertestcase.py", line 473, in tearDown self.filter.stop() File "/home/yoh/deb/gits/fail2ban/server/filterpyinotify.py", line 196, in stop self.__notifier.stop() File "/usr/lib/pymodules/python2.6/pyinotify.py", line 1315, in stop threading.Thread.join(self) File "/usr/lib/python2.6/threading.py", line 633, in join raise RuntimeError("cannot join thread before it is started") RuntimeError: cannot join thread before it is started that is with pyinotify 0.8.9-1 so could quite be "related" to its age.	2014-04-16 08:26:38 -04:00
Yaroslav Halchenko	cb9cbd754e	DOC: minor wording fix	2014-04-16 08:26:38 -04:00
Yaroslav Halchenko	f206c3d493	BF: give a custom prefix to a tempfile and close it upon tearDown in ExecuteActions tests	2014-04-16 08:26:38 -04:00
Yaroslav Halchenko	8cb6ec54ac	Merge pull request #691 from yarikoptic/enh/travis_multiple_log_levels ENH: run travis with both 'error' and 'heavydebug' levels to ease troubleshooting of failures	2014-04-16 00:50:54 -04:00
Yaroslav Halchenko	a45467ac91	ENH: run travis with both 'error' and 'heavydebug' levels to ease troubleshooting of failures	2014-04-15 23:40:09 -04:00
Steven Hiscocks	5c2730d7be	DOC: Update ChangeLog	2014-04-03 19:03:05 +01:00
Steven Hiscocks	7260403fdd	TST: Close file to allow proper removal in MonitorFailures	2014-03-31 19:02:28 +01:00
Daniel Black	2a31d45582	Merge pull request #669 from kwirk/inotify-watch-auto-remove BF: Handle case when inotify watch is auto deleted on file deletion	2014-03-31 18:37:01 +11:00
Steven Hiscocks	fdcded262d	BF: Handle case when inotify watch is auto deleted on file deletion When a file is deleted, the watcher for it is automatically removed. FilterPyinotify is detecting a new file being created with the same name, and in turn attempts to remove the watch for the deleted file (which has already been removed automatically). Also, IN_IGNORED events are generated when a file is deleted, but these weren't being caught, causing an non-existent file path to be passed to FilterPyinotify._process_file (which caught the exceptions in Filter.getFailures).	2014-03-29 16:38:39 +00:00