Preparing for 0.9.7 release

filter.d/exim.conf: optional part `(...)` by authenticator failed for ...

.coveragerc

@@ -1,4 +1,11 @@
 
 [run]
 branch = True
-omit = /usr*
+source =
+    config
+    fail2ban
+
+[report]
+exclude_lines =
+    pragma: no cover
+    pragma: systemd no cover

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,49 @@
+_We will be very grateful, if your problem was described as completely as possible,
+enclosing excerpts from logs (if possible within DEBUG mode, if no errors evident
+within INFO mode), and configuration in particular of effected relevant settings
+(e.g., with ` fail2ban-client -d | grep 'affected-jail-name' ` for a particular
+jail troubleshooting).
+Thank you in advance for the details, because such issues like "It does not work" 
+alone could not help to resolve anything!
+Thanks! (remove this paragraph and other comments upon reading)_
+
+### Environment:
+
+_Fill out and check (`[x]`) the boxes which apply. If your Fail2Ban version is outdated, 
+and you can't verify that the issue persists in the recent release, better seek support 
+from the distribution you obtained Fail2Ban from_
+
+- Fail2Ban version (including any possible distribution suffixes):
+- OS, including release name/version: 
+- [ ] Fail2Ban installed via OS/distribution mechanisms
+- [ ] You have not applied any additional foreign patches to the codebase
+- [ ] Some customizations were done to the configuration (provide details below is so)
+
+### The issue:
+
+_Summary here_
+
+#### Steps to reproduce
+
+#### Expected behavior
+
+#### Observed behavior
+
+#### Any additional information
+
+### Configuration, dump and another helpful excerpts
+
+#### Any customizations done to /etc/fail2ban/ configuration
+```
+```
+
+#### Relevant parts of /var/log/fail2ban.log file:
+_preferably obtained while running fail2ban with `loglevel = 4`_
+
+```
+```
+
+#### Relevant lines from monitored log files in question:
+
+```
+```

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,9 @@
+Before submitting your PR, please review the following checklist:
+
+- [ ] **CONSIDER adding a unit test** if your PR resolves an issue
+- [ ] **LIST ISSUES** this PR resolves
+- [ ] **MAKE SURE** this PR doesn't break existing tests 
+- [ ] **KEEP PR small** so it could be easily reviewed.
+- [ ] **AVOID** making unnecessary stylistic changes in unrelated code
+- [ ] **ACCOMPANY** each new `failregex` for filter `X` with sample log lines 
+      within `fail2ban/tests/files/logs/X` file

.gitignore

@@ -9,3 +9,4 @@ htmlcov
 *.bak
 __pycache__
 .vagrant/
+.idea/

.mailmap

@@ -0,0 +1,5 @@
+Lee Clemens <java@leeclemens.net>
+Serg G. Brester <info@sebres.de>
+Serg G. Brester <serg.brester@sebres.de>
+Serg G. Brester <sergey.brester@W7-DEHBG0189.wincor-nixdorf.com>
+Viktor Szépe <viktor@szepe.net>

.pydevproject

@@ -1,12 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?eclipse-pydev version="1.0"?>
-
-<pydev_project>
-<pydev_property name="org.python.pydev.PYTHON_PROJECT_VERSION">python 2.3</pydev_property>
-<pydev_pathproperty name="org.python.pydev.PROJECT_SOURCE_PATH">
-<path>/fail2ban-0.8/client</path>
-<path>/fail2ban-0.8/server</path>
-<path>/fail2ban-0.8/testcases</path>
-<path>/fail2ban-0.8</path>
-</pydev_pathproperty>
-</pydev_project>

.travis.yml

@@ -1,22 +1,62 @@
 # vim ft=yaml
 # travis-ci.org definition for Fail2Ban build
+# https://travis-ci.org/fail2ban/fail2ban/
 language: python
 python:
-  - "2.6"
-  - "2.7"
-  - "3.2"
-  - "3.3"
-  - "3.4"
-  - "pypy"
+  - 2.6
+  - 2.7
+  - pypy
+  # disabled until coverage module fixes up compatibility issue
+  # - 3.2
+  - 3.3
+  - 3.4
+  # disabled since setuptools dropped support for Python 3.0 - 3.2
+  # - pypy3
+  - pypy3.3-5.2-alpha1
 before_install:
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then sudo apt-get update -qq; fi
+  - if [[ $TRAVIS_PYTHON_VERSION == 2* || $TRAVIS_PYTHON_VERSION == 'pypy' ]]; then export F2B_PY_2=true && echo "Set F2B_PY_2"; fi
+  - if [[ $TRAVIS_PYTHON_VERSION == 3* || $TRAVIS_PYTHON_VERSION == 'pypy3' ]]; then export F2B_PY_3=true && echo "Set F2B_PY_3"; fi
+  - travis_retry sudo apt-get update -qq
+  # Set this so sudo executes the correct python binary
+  #   Anything not using sudo will already have the correct environment
+  - export VENV_BIN="$VIRTUAL_ENV/bin" && echo "VENV_BIN set to $VENV_BIN"
 install:
-  - pip install pyinotify
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then sudo apt-get install -qq python-gamin; cp /usr/share/pyshared/gamin.py /usr/lib/pyshared/python2.7/_gamin.so $VIRTUAL_ENV/lib/python2.7/site-packages/; fi
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then cd ..; pip install -q coveralls; cd -; fi
+  # Install Python packages / dependencies
+  #   coverage
+  - travis_retry pip install coverage
+  #   coveralls
+  - travis_retry pip install coveralls codecov
+  #   dnspython or dnspython3
+  - if [[ "$F2B_PY_2" ]]; then travis_retry pip install dnspython; fi
+  - if [[ "$F2B_PY_3" ]]; then travis_retry pip install dnspython3; fi
+  #   gamin - install manually (not in PyPI) - travis-ci system Python is 2.7
+  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then travis_retry sudo apt-get install -qq python-gamin && cp /usr/share/pyshared/gamin.py /usr/lib/pyshared/python2.7/_gamin.so $VIRTUAL_ENV/lib/python2.7/site-packages/; fi
+  #   pyinotify
+  - travis_retry pip install pyinotify
+before_script:
+  # Manually execute 2to3 for now
+  - if [[ "$F2B_PY_3" ]]; then ./fail2ban-2to3; fi
 script:
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then coverage run --rcfile=.travis_coveragerc setup.py test; else python setup.py test; fi
+  # Keep the legacy setup.py test approach of checking coverage for python2
+  - if [[ "$F2B_PY_2" ]]; then coverage run setup.py test; fi
+  # Coverage doesn't pick up setup.py test with python3, so run it directly
+  - if [[ "$F2B_PY_3" ]]; then coverage run bin/fail2ban-testcases; fi
+  # Use $VENV_BIN (not python) or else sudo will always run the system's python (2.7)
+  - sudo $VENV_BIN/pip install .
+  # Doc files should get installed on Travis under Linux
+  - test -e /usr/share/doc/fail2ban/FILTERS
 after_success:
-# Coverage config file must be .coveragerc for coveralls
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then cp -v .travis_coveragerc .coveragerc; fi
-  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then coveralls; fi
+  - coveralls
+  - codecov
+matrix:
+  fast_finish: true
+# Might be worth looking into
+#notifications:
+#  email: true
+#  irc:
+#    channels: "irc.freenode.org#fail2ban"
+#    template:
+#      - "%{repository}@%{branch}: %{message} (%{build_url})"
+#    on_success: change
+#    on_failure: change
+#    skip_join: true

.travis_coveragerc

@@ -1,7 +0,0 @@
-
-[run]
-branch = True
-omit =
-    /usr/*
-    /home/travis/virtualenv/*
-    fail2ban/server/filtersystemd.py

3rdparty/logwatch/fail2ban

@@ -1,181 +0,0 @@
-#!/usr/bin/perl
-##########################################################################
-# $Id: fail2ban 150 2013-06-18 22:19:38Z mtremaine $
-##########################################################################
-# $Log: fail2ban,v $
-# Revision 1.5  2008/08/18 16:07:46  mike
-# Patches from Paul Gear <paul at libertysys.com> -mgt
-#
-# Revision 1.4  2008/06/30 23:07:51  kirk
-# fixed copyright holders for files where I know who they should be
-#
-# Revision 1.3  2008/03/24 23:31:26  kirk
-# added copyright/license notice to each script
-#
-# Revision 1.2  2006/12/15 04:53:59  bjorn
-# Additional filtering, by Willi Mann.
-#
-# Revision 1.1  2006/05/30 19:04:26  bjorn
-# Added fail2ban service, written by Yaroslav Halchenko.
-#
-# Written by Yaroslav Halchenko <debian@onerussian.com> for fail2ban
-#
-##########################################################################
-
-########################################################
-## Copyright (c) 2008  Yaroslav Halchenko
-## Covered under the included MIT/X-Consortium License:
-##    http://www.opensource.org/licenses/mit-license.php
-## All modifications and contributions by other persons to
-## this script are assumed to have been donated to the
-## Logwatch project and thus assume the above copyright
-## and licensing terms.  If you want to make contributions
-## under your own copyright or a different license this
-## must be explicitly stated in the contribution an the
-## Logwatch project reserves the right to not accept such
-## contributions.  If you have made significant
-## contributions to this script and want to claim
-## copyright please contact logwatch-devel@lists.sourceforge.net.
-#########################################################
-
-use strict;
-use Logwatch ':all';
-
-my $Debug = $ENV{'LOGWATCH_DEBUG'} || 0;
-my $Detail = $ENV{'LOGWATCH_DETAIL_LEVEL'} || 0;
-my $IgnoreHost = $ENV{'sshd_ignore_host'} || "";
-my $DebugCounter = 0;
-my $ReInitializations = 0;
-my @IptablesErrors = ();
-my @ActionErrors = ();
-my $NotValidIP = 0;		# reported invalid IPs number
-my @OtherList = ();
-
-my %ServicesBans = ();
-
-if ( $Debug >= 5 ) {
-	print STDERR "\n\nDEBUG: Inside Fail2Ban Filter \n\n";
-	$DebugCounter = 1;
-}
-
-while (defined(my $ThisLine = <STDIN>)) {
-    if ( $Debug >= 5 ) {
-	print STDERR "DEBUG($DebugCounter): $ThisLine";
-	$DebugCounter++;
-    }
-    chomp($ThisLine);
-    if ( ($ThisLine =~ /..,... DEBUG: /) or
-	 ($ThisLine =~ /..,... \S*\s*: DEBUG /) or # syntax of 0.7.? fail2ban
-	 ($ThisLine =~ /..,... INFO: (Fail2Ban v.* is running|Exiting|Enabled sections:)/) or
-	 ($ThisLine =~ /INFO\s+Log rotation detected for/) or
-	 ($ThisLine =~ /INFO\s+Jail.+(?:stopped|started|uses poller)/) or
-	 ($ThisLine =~ /INFO\s+Changed logging target to/) or
-	 ($ThisLine =~ /INFO\s+Creating new jail/) or
-	 ($ThisLine =~ /..,... \S+\s*: INFO\s+(Set |Socket|Exiting|Gamin|Created|Added|Using)/) or # syntax of 0.7.? fail2ban
-	 ($ThisLine =~ /..,... WARNING: Verbose level is /) or
-	 ($ThisLine =~ /..,... WARNING: Restoring firewall rules/)
-       )
-    {
-	if ( $Debug >= 6 ) {
-	    print STDERR "DEBUG($DebugCounter): line ignored\n";
-	}
-    } elsif ( my ($Service,$Action,$Host) = ($ThisLine =~ m/WARNING:?\s\[?(.*?)[]:]?\s(Ban|Unban)[^\.]* (\S+)/)) {
-	if ( $Debug >= 6 ) {
-	    print STDERR "DEBUG($DebugCounter): Found $Action for $Service from $Host\n";
-	}
-	$ServicesBans{$Service}{$Host}{$Action}++;
-	$ServicesBans{$Service}{"(all)"}{$Action}++;
-    } elsif ( my ($Service,$Host,$NumFailures) = ($ThisLine =~ m/INFO: (\S+): (.+) has (\d+) login failure\(s\). Banned./)) {
-	if ($Debug >= 4) {
-	    print STDERR "DEBUG: Found host $Host trying to access $Service - failed $NumFailures times\n";
-	}
-	push @{$ServicesBans{$Service}{$Host}{'Failures'}}, $NumFailures;
-    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/ ERROR:\s(.*):\s(\S+)\salready in ban list/)) {
-   	 $ServicesBans{$Service}{$Host}{'AlreadyInTheList'}++;
-    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/WARNING\s*\[(.*)\]\s*(\S+)\s*already banned/)) {
-       $ServicesBans{$Service}{$Host}{'AlreadyInTheList'}++;
-    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/ WARNING:\s(.*):\sReBan (\S+)/)) {
-	    $ServicesBans{$Service}{$Host}{'ReBan'}++;
-    } elsif ($ThisLine =~ / ERROR:?\s*(Execution of command )?\'?iptables/) {
-	    push @IptablesErrors, "$ThisLine\n";
-    } elsif ($ThisLine =~ /ERROR.*returned \d+$/) {
-       push @ActionErrors, "$ThisLine\n";
-    } elsif (($ThisLine =~ /..,... WARNING: \#\S+ reinitialization of firewalls/) or
-	    ($ThisLine =~ / ERROR\s*Invariant check failed. Trying to restore a sane environment/)) {
-	    $ReInitializations++;
-    } elsif ($ThisLine =~ /..,... WARNING:  is not a valid IP address/) {
-	# just ignore - this will be fixed within fail2ban and is harmless warning
-    }
-    else
-    {
-	# Report any unmatched entries...
-	push @OtherList, "$ThisLine\n";
-    }
-}
-
-###########################################################
-
-
-if (keys %ServicesBans) {
-    printf("\nBanned services with Fail2Ban:				 Bans:Unbans\n");
-    foreach my $service (sort {$a cmp $b} keys %ServicesBans) {
-	printf("   %-55s [%3d:%-3d]\n", "$service:",
-	       $ServicesBans{$service}{'(all)'}{'Ban'},
-	       $ServicesBans{$service}{'(all)'}{'Unban'});
-	delete $ServicesBans{$service}{'(all)'};
-	my $totalSort = TotalCountOrder(%{$ServicesBans{$service}}, \&SortIP);
-	if ($Detail >= 5) {
-	    foreach my $ip (sort $totalSort keys %{$ServicesBans{$service}}) {
-		   my $name = LookupIP($ip);
-		   printf("      %-53s %3d:%-3d\n",
-		       $name,
-		       $ServicesBans{$service}{$ip}{'Ban'},
-		       $ServicesBans{$service}{$ip}{'Unban'});
-		   if (($Detail >= 10) and ($ServicesBans{$service}{$ip}{'Failures'}>0)) {
-		      print "	   Failed ";
-		      foreach my $fails (@{$ServicesBans{$service}{$ip}{'Failures'}}) {
-			      print " $fails";
-		      }
-		    print " times";
-		    printf("\n	   %d Duplicate Ban attempts", $ServicesBans{$service}{$ip}{'AlreadyInTheList'}) ;
-		    printf("\n	   %d ReBans due to rules reinitilizations", $ServicesBans{$service}{$ip}{'ReBan'}) ;
-		    print "\n";
-		   }
-	    }
-	   }
-    }
-}
-
-
-if ($Detail>0) {
-    if ($#IptablesErrors > 0) {
-	   printf("\n%d faulty iptables invocation(s)", $#IptablesErrors);
-	   if ($Detail > 5) {
-	    print ":\n";
-	    print @IptablesErrors ;
-	   }
-    }
-    if ($#ActionErrors > 0) {
-       printf("\n%d error(s) returned from actions", $#ActionErrors);
-       if ($Detail > 5) {
-           print ":\n";
-           print @ActionErrors ;
-       }
-    }
-    if ($ReInitializations > 0) {
-	   printf("\n%d fail2ban rules reinitialization(s)", $ReInitializations);
-    }
-    if ($#OtherList >= 0) {
-	   print "\n**Unmatched Entries**\n";
-	   print @OtherList;
-    }
-}
-
-exit(0);
-
-# vi: shiftwidth=3 tabstop=3 syntax=perl et
-# Local Variables:
-# mode: perl
-# perl-indent-level: 3
-# indent-tabs-mode: nil
-# End:

CONTRIBUTING.md

@@ -15,3 +15,13 @@ join the [mailing list](https://lists.sourceforge.net/lists/listinfo/fail2ban-us
 
 ### You would like to contribute (new filters/actions/code/documentation)?
 send a [pull request](https://github.com/fail2ban/fail2ban/pulls)
+
+Pull requests guidelines
+========================
+
+- If there is an issue on github to be closed by the pull request, include
+  ```Closes #ISSUE``` (where ISSUE is issue's number)
+  
+- Add a brief summary of the change to the ChangeLog file into a corresponding
+  section out of Fixes, New Features or Enhancements (improvements to existing
+  features)

DEVELOP

@@ -56,9 +56,12 @@ following (note: on Debian-based systems, the script is called
 `python-coverage`)::
 
   coverage run bin/fail2ban-testcases
+  coverage report
+
+Optionally:
   coverage html
 
-Then look at htmlcov/index.html and see how much coverage your test cases
+And then browse htmlcov/index.html and see how much coverage your test cases
 exert over the code base. Full coverage is a good thing however it may not be
 complete. Try to ensure tests cover as many independent paths through the
 code.
@@ -81,6 +84,18 @@ some quick commands::
   status test
 
 
+Testing with vagrant
+--------------------
+
+Testing can now be done inside a vagrant VM.  Vagrantfile provided in
+source code repository established two VMs:
+
+- VM "secure" which can be used for testing fail2ban code.
+- VM "attacker" which can be used to perform attack against our "secure" VM.
+
+Both VMs are sharing the 192.168.200/24 network. If you are using this network
+take a look into the Vagrantfile and change the IP.
+
 
 Coding Standards
 ================

FILTERS

@@ -227,7 +227,7 @@ Regular expressions (failregex, ignoreregex) assume that the date/time has been
 removed from the log line (this is just how fail2ban works internally ATM).
 
 If the format is like '<date...> error 1.2.3.4 is evil' then you need to match
-the < at the start so regex should be similar to '^<> <HOST> is evil$' using
+the <> at the start so regex should be similar to '^<> error <HOST> is evil$' using
 <HOST> where the IP/domain name appears in the log line.
 
 The following general rules apply to regular expressions:

MANIFEST

@@ -1,318 +1,409 @@
-README.md
-README.Solaris
-ChangeLog
-TODO
-THANKS
-COPYING
-DEVELOP
-FILTERS
-fail2ban-2to3
-fail2ban-testcases-all
-fail2ban-testcases-all-python3
 bin/fail2ban-client
+bin/fail2ban-regex
 bin/fail2ban-server
 bin/fail2ban-testcases
-bin/fail2ban-regex
+ChangeLog
+config/action.d/apf.conf
+config/action.d/badips.conf
+config/action.d/badips.py
+config/action.d/blocklist_de.conf
+config/action.d/bsd-ipfw.conf
+config/action.d/cloudflare.conf
+config/action.d/complain.conf
+config/action.d/dshield.conf
+config/action.d/dummy.conf
+config/action.d/firewallcmd-allports.conf
+config/action.d/firewallcmd-ipset.conf
+config/action.d/firewallcmd-multiport.conf
+config/action.d/firewallcmd-new.conf
+config/action.d/firewallcmd-rich-logging.conf
+config/action.d/firewallcmd-rich-rules.conf
+config/action.d/hostsdeny.conf
+config/action.d/ipfilter.conf
+config/action.d/ipfw.conf
+config/action.d/iptables-allports.conf
+config/action.d/iptables-common.conf
+config/action.d/iptables.conf
+config/action.d/iptables-ipset-proto4.conf
+config/action.d/iptables-ipset-proto6-allports.conf
+config/action.d/iptables-ipset-proto6.conf
+config/action.d/iptables-multiport.conf
+config/action.d/iptables-multiport-log.conf
+config/action.d/iptables-new.conf
+config/action.d/iptables-xt_recent-echo.conf
+config/action.d/mail-buffered.conf
+config/action.d/mail.conf
+config/action.d/mail-whois-common.conf
+config/action.d/mail-whois.conf
+config/action.d/mail-whois-lines.conf
+config/action.d/mynetwatchman.conf
+config/action.d/netscaler.conf
+config/action.d/nftables-allports.conf
+config/action.d/nftables-common.conf
+config/action.d/nftables-multiport.conf
+config/action.d/npf.conf
+config/action.d/nsupdate.conf
+config/action.d/osx-afctl.conf
+config/action.d/osx-ipfw.conf
+config/action.d/pf.conf
+config/action.d/route.conf
+config/action.d/sendmail-buffered.conf
+config/action.d/sendmail-common.conf
+config/action.d/sendmail.conf
+config/action.d/sendmail-geoip-lines.conf
+config/action.d/sendmail-whois.conf
+config/action.d/sendmail-whois-ipjailmatches.conf
+config/action.d/sendmail-whois-ipmatches.conf
+config/action.d/sendmail-whois-lines.conf
+config/action.d/sendmail-whois-matches.conf
+config/action.d/shorewall.conf
+config/action.d/shorewall-ipset-proto6.conf
+config/action.d/smtp.py
+config/action.d/symbiosis-blacklist-allports.conf
+config/action.d/ufw.conf
+config/action.d/xarf-login-attack.conf
+config/fail2ban.conf
+config/filter.d/3proxy.conf
+config/filter.d/apache-auth.conf
+config/filter.d/apache-badbots.conf
+config/filter.d/apache-botsearch.conf
+config/filter.d/apache-common.conf
+config/filter.d/apache-fakegooglebot.conf
+config/filter.d/apache-modsecurity.conf
+config/filter.d/apache-nohome.conf
+config/filter.d/apache-noscript.conf
+config/filter.d/apache-overflows.conf
+config/filter.d/apache-pass.conf
+config/filter.d/apache-shellshock.conf
+config/filter.d/assp.conf
+config/filter.d/asterisk.conf
+config/filter.d/botsearch-common.conf
+config/filter.d/common.conf
+config/filter.d/counter-strike.conf
+config/filter.d/courier-auth.conf
+config/filter.d/courier-smtp.conf
+config/filter.d/cyrus-imap.conf
+config/filter.d/directadmin.conf
+config/filter.d/domino-smtp.conf
+config/filter.d/dovecot.conf
+config/filter.d/dropbear.conf
+config/filter.d/drupal-auth.conf
+config/filter.d/ejabberd-auth.conf
+config/filter.d/exim-common.conf
+config/filter.d/exim.conf
+config/filter.d/exim-spam.conf
+config/filter.d/freeswitch.conf
+config/filter.d/froxlor-auth.conf
+config/filter.d/groupoffice.conf
+config/filter.d/gssftpd.conf
+config/filter.d/guacamole.conf
+config/filter.d/haproxy-http-auth.conf
+config/filter.d/horde.conf
+config/filter.d/ignorecommands
+config/filter.d/ignorecommands/apache-fakegooglebot
+config/filter.d/kerio.conf
+config/filter.d/lighttpd-auth.conf
+config/filter.d/mongodb-auth.conf
+config/filter.d/monit.conf
+config/filter.d/murmur.conf
+config/filter.d/mysqld-auth.conf
+config/filter.d/nagios.conf
+config/filter.d/named-refused.conf
+config/filter.d/nginx-botsearch.conf
+config/filter.d/nginx-http-auth.conf
+config/filter.d/nginx-limit-req.conf
+config/filter.d/nsd.conf
+config/filter.d/openhab.conf
+config/filter.d/openwebmail.conf
+config/filter.d/oracleims.conf
+config/filter.d/pam-generic.conf
+config/filter.d/perdition.conf
+config/filter.d/php-url-fopen.conf
+config/filter.d/portsentry.conf
+config/filter.d/postfix.conf
+config/filter.d/postfix-rbl.conf
+config/filter.d/postfix-sasl.conf
+config/filter.d/proftpd.conf
+config/filter.d/pure-ftpd.conf
+config/filter.d/qmail.conf
+config/filter.d/recidive.conf
+config/filter.d/roundcube-auth.conf
+config/filter.d/screensharingd.conf
+config/filter.d/selinux-common.conf
+config/filter.d/selinux-ssh.conf
+config/filter.d/sendmail-auth.conf
+config/filter.d/sendmail-reject.conf
+config/filter.d/sendmail-spam.conf
+config/filter.d/sieve.conf
+config/filter.d/slapd.conf
+config/filter.d/sogo-auth.conf
+config/filter.d/solid-pop3d.conf
+config/filter.d/squid.conf
+config/filter.d/squirrelmail.conf
+config/filter.d/sshd-aggressive.conf
+config/filter.d/sshd.conf
+config/filter.d/sshd-ddos.conf
+config/filter.d/stunnel.conf
+config/filter.d/suhosin.conf
+config/filter.d/tine20.conf
+config/filter.d/uwimap-auth.conf
+config/filter.d/vsftpd.conf
+config/filter.d/webmin-auth.conf
+config/filter.d/wuftpd.conf
+config/filter.d/xinetd-fail.conf
+config/jail.conf
+config/paths-common.conf
+config/paths-debian.conf
+config/paths-fedora.conf
+config/paths-freebsd.conf
+config/paths-opensuse.conf
+config/paths-osx.conf
+CONTRIBUTING.md
+COPYING
+.coveragerc
+DEVELOP
 doc/run-rootless.txt
-fail2ban/client/configreader.py
-fail2ban/client/configparserinc.py
-fail2ban/client/jailreader.py
-fail2ban/client/fail2banreader.py
-fail2ban/client/jailsreader.py
-fail2ban/client/beautifier.py
-fail2ban/client/filterreader.py
+fail2ban-2to3
 fail2ban/client/actionreader.py
-fail2ban/client/__init__.py
+fail2ban/client/beautifier.py
+fail2ban/client/configparserinc.py
+fail2ban/client/configreader.py
 fail2ban/client/configurator.py
 fail2ban/client/csocket.py
-fail2ban/server/asyncserver.py
-fail2ban/server/database.py
-fail2ban/server/filter.py
-fail2ban/server/filterpyinotify.py
-fail2ban/server/filtergamin.py
-fail2ban/server/filterpoll.py
-fail2ban/server/filtersystemd.py
-fail2ban/server/iso8601.py
-fail2ban/server/server.py
+fail2ban/client/fail2banreader.py
+fail2ban/client/fail2banregex.py
+fail2ban/client/filterreader.py
+fail2ban/client/__init__.py
+fail2ban/client/jailreader.py
+fail2ban/client/jailsreader.py
+fail2ban/exceptions.py
+fail2ban/helpers.py
+fail2ban/__init__.py
+fail2ban/protocol.py
+fail2ban/server/action.py
 fail2ban/server/actions.py
+fail2ban/server/asyncserver.py
+fail2ban/server/banmanager.py
+fail2ban/server/database.py
+fail2ban/server/datedetector.py
+fail2ban/server/datetemplate.py
 fail2ban/server/faildata.py
 fail2ban/server/failmanager.py
-fail2ban/server/datedetector.py
-fail2ban/server/jailthread.py
-fail2ban/server/transmitter.py
-fail2ban/server/action.py
-fail2ban/server/ticket.py
+fail2ban/server/failregex.py
+fail2ban/server/filtergamin.py
+fail2ban/server/filterpoll.py
+fail2ban/server/filter.py
+fail2ban/server/filterpyinotify.py
+fail2ban/server/filtersystemd.py
+fail2ban/server/__init__.py
+fail2ban/server/iso8601.py
 fail2ban/server/jail.py
 fail2ban/server/jails.py
-fail2ban/server/__init__.py
-fail2ban/server/banmanager.py
-fail2ban/server/datetemplate.py
+fail2ban/server/jailthread.py
 fail2ban/server/mytime.py
-fail2ban/server/failregex.py
-fail2ban/server/database.py
-fail2ban/tests/banmanagertestcase.py
-fail2ban/tests/failmanagertestcase.py
-fail2ban/tests/clientreadertestcase.py
-fail2ban/tests/filtertestcase.py
-fail2ban/tests/__init__.py
-fail2ban/tests/dummyjail.py
-fail2ban/tests/samplestestcase.py
-fail2ban/tests/datedetectortestcase.py
+fail2ban/server/server.py
+fail2ban/server/strptime.py
+fail2ban/server/ticket.py
+fail2ban/server/transmitter.py
+fail2ban/setup.py
+fail2ban-testcases-all
+fail2ban-testcases-all-python3
+fail2ban/tests/action_d/__init__.py
+fail2ban/tests/action_d/test_badips.py
+fail2ban/tests/action_d/test_smtp.py
+fail2ban/tests/actionstestcase.py
 fail2ban/tests/actiontestcase.py
-fail2ban/tests/servertestcase.py
-fail2ban/tests/sockettestcase.py
-fail2ban/tests/utils.py
-fail2ban/tests/misctestcase.py
-fail2ban/tests/databasetestcase.py
-fail2ban/tests/config/jail.conf
+fail2ban/tests/banmanagertestcase.py
+fail2ban/tests/clientreadertestcase.py
+fail2ban/tests/config/action.d/brokenaction.conf
 fail2ban/tests/config/fail2ban.conf
+fail2ban/tests/config/filter.d/common.conf
+fail2ban/tests/config/filter.d/simple.conf
+fail2ban/tests/config/filter.d/test.conf
+fail2ban/tests/config/filter.d/test.local
+fail2ban/tests/config/filter.d/zzz-generic-example.conf
+fail2ban/tests/config/jail.conf
 fail2ban/tests/config/paths-common.conf
+fail2ban/tests/config/paths-debian.conf
 fail2ban/tests/config/paths-freebsd.conf
 fail2ban/tests/config/paths-osx.conf
-fail2ban/tests/config/paths-debian.conf
-fail2ban/tests/config/filter.d/simple.conf
-fail2ban/tests/config/action.d/brokenaction.conf
-fail2ban/tests/files/config/apache-auth/digest/.htaccess
-fail2ban/tests/files/config/apache-auth/digest/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest_time/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_time/.htpasswd
-fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htaccess
+fail2ban/tests/databasetestcase.py
+fail2ban/tests/datedetectortestcase.py
+fail2ban/tests/dummyjail.py
+fail2ban/tests/fail2banregextestcase.py
+fail2ban/tests/failmanagertestcase.py
+fail2ban/tests/files/action.d/action_checkainfo.py
+fail2ban/tests/files/action.d/action_errors.py
+fail2ban/tests/files/action.d/action_modifyainfo.py
+fail2ban/tests/files/action.d/action_noAction.py
+fail2ban/tests/files/action.d/action_nomethod.py
+fail2ban/tests/files/action.d/action.py
 fail2ban/tests/files/config/apache-auth/basic/authz_owner/cant_get_me.html
+fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htaccess
 fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htpasswd
 fail2ban/tests/files/config/apache-auth/basic/file/.htaccess
 fail2ban/tests/files/config/apache-auth/basic/file/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest.py
-fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htpasswd
 fail2ban/tests/files/config/apache-auth/digest_anon/.htaccess
 fail2ban/tests/files/config/apache-auth/digest_anon/.htpasswd
-fail2ban/tests/files/config/apache-auth/README
+fail2ban/tests/files/config/apache-auth/digest/.htaccess
+fail2ban/tests/files/config/apache-auth/digest/.htpasswd
+fail2ban/tests/files/config/apache-auth/digest.py
+fail2ban/tests/files/config/apache-auth/digest_time/.htaccess
+fail2ban/tests/files/config/apache-auth/digest_time/.htpasswd
+fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htaccess
+fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htpasswd
 fail2ban/tests/files/config/apache-auth/noentry/.htaccess
+fail2ban/tests/files/config/apache-auth/README
 fail2ban/tests/files/database_v1.db
-fail2ban/tests/files/ignorecommand.py
 fail2ban/tests/files/filter.d/substition.conf
-fail2ban/tests/files/filter.d/testcase-common.conf
 fail2ban/tests/files/filter.d/testcase01.conf
-fail2ban/tests/files/testcase01.log
-fail2ban/tests/files/testcase02.log
-fail2ban/tests/files/testcase03.log
-fail2ban/tests/files/testcase04.log
-fail2ban/tests/files/testcase-usedns.log
-fail2ban/tests/files/testcase-journal.log
-fail2ban/tests/files/testcase-multiline.log
-fail2ban/tests/files/logs/bsd/syslog-plain.txt
-fail2ban/tests/files/logs/bsd/syslog-v.txt
-fail2ban/tests/files/logs/bsd/syslog-vv.txt
+fail2ban/tests/files/filter.d/testcase-common.conf
+fail2ban/tests/files/ignorecommand.py
 fail2ban/tests/files/logs/3proxy
 fail2ban/tests/files/logs/apache-auth
 fail2ban/tests/files/logs/apache-badbots
 fail2ban/tests/files/logs/apache-botscripts
+fail2ban/tests/files/logs/apache-botsearch
+fail2ban/tests/files/logs/apache-fakegooglebot
 fail2ban/tests/files/logs/apache-modsecurity
 fail2ban/tests/files/logs/apache-nohome
 fail2ban/tests/files/logs/apache-noscript
 fail2ban/tests/files/logs/apache-overflows
+fail2ban/tests/files/logs/apache-pass
+fail2ban/tests/files/logs/apache-shellshock
 fail2ban/tests/files/logs/assp
 fail2ban/tests/files/logs/asterisk
+fail2ban/tests/files/logs/bsd/syslog-plain.txt
+fail2ban/tests/files/logs/bsd/syslog-v.txt
+fail2ban/tests/files/logs/bsd/syslog-vv.txt
 fail2ban/tests/files/logs/counter-strike
 fail2ban/tests/files/logs/courier-auth
 fail2ban/tests/files/logs/courier-smtp
 fail2ban/tests/files/logs/cyrus-imap
+fail2ban/tests/files/logs/directadmin
+fail2ban/tests/files/logs/domino-smtp
 fail2ban/tests/files/logs/dovecot
 fail2ban/tests/files/logs/dropbear
+fail2ban/tests/files/logs/drupal-auth
 fail2ban/tests/files/logs/ejabberd-auth
 fail2ban/tests/files/logs/exim
 fail2ban/tests/files/logs/exim-spam
 fail2ban/tests/files/logs/freeswitch
+fail2ban/tests/files/logs/froxlor-auth
 fail2ban/tests/files/logs/groupoffice
 fail2ban/tests/files/logs/gssftpd
 fail2ban/tests/files/logs/guacamole
+fail2ban/tests/files/logs/haproxy-http-auth
+fail2ban/tests/files/logs/horde
 fail2ban/tests/files/logs/kerio
 fail2ban/tests/files/logs/lighttpd-auth
+fail2ban/tests/files/logs/mongodb-auth
+fail2ban/tests/files/logs/monit
+fail2ban/tests/files/logs/murmur
 fail2ban/tests/files/logs/mysqld-auth
 fail2ban/tests/files/logs/nagios
+fail2ban/tests/files/logs/named-refused
+fail2ban/tests/files/logs/nginx-botsearch
+fail2ban/tests/files/logs/nginx-http-auth
+fail2ban/tests/files/logs/nginx-limit-req
 fail2ban/tests/files/logs/nsd
+fail2ban/tests/files/logs/openhab
+fail2ban/tests/files/logs/openwebmail
+fail2ban/tests/files/logs/oracleims
+fail2ban/tests/files/logs/pam-generic
 fail2ban/tests/files/logs/perdition
 fail2ban/tests/files/logs/php-url-fopen
-fail2ban/tests/files/logs/postfix-sasl
-fail2ban/tests/files/logs/named-refused
-fail2ban/tests/files/logs/nginx-http-auth
-fail2ban/tests/files/logs/pam-generic
+fail2ban/tests/files/logs/portsentry
 fail2ban/tests/files/logs/postfix
+fail2ban/tests/files/logs/postfix-rbl
+fail2ban/tests/files/logs/postfix-sasl
 fail2ban/tests/files/logs/proftpd
 fail2ban/tests/files/logs/pure-ftpd
 fail2ban/tests/files/logs/qmail
 fail2ban/tests/files/logs/recidive
 fail2ban/tests/files/logs/roundcube-auth
+fail2ban/tests/files/logs/screensharingd
 fail2ban/tests/files/logs/selinux-ssh
+fail2ban/tests/files/logs/sendmail-auth
+fail2ban/tests/files/logs/sendmail-reject
 fail2ban/tests/files/logs/sendmail-spam
 fail2ban/tests/files/logs/sieve
-fail2ban/tests/files/logs/squid
-fail2ban/tests/files/logs/stunnel
-fail2ban/tests/files/logs/suhosin
+fail2ban/tests/files/logs/slapd
 fail2ban/tests/files/logs/sogo-auth
 fail2ban/tests/files/logs/solid-pop3d
+fail2ban/tests/files/logs/squid
+fail2ban/tests/files/logs/squirrelmail
 fail2ban/tests/files/logs/sshd
+fail2ban/tests/files/logs/sshd-aggressive
 fail2ban/tests/files/logs/sshd-ddos
+fail2ban/tests/files/logs/stunnel
+fail2ban/tests/files/logs/suhosin
+fail2ban/tests/files/logs/tine20
+fail2ban/tests/files/logs/uwimap-auth
 fail2ban/tests/files/logs/vsftpd
 fail2ban/tests/files/logs/webmin-auth
 fail2ban/tests/files/logs/wuftpd
-fail2ban/tests/files/logs/uwimap-auth
 fail2ban/tests/files/logs/xinetd-fail
-fail2ban/tests/config/jail.conf
-fail2ban/tests/config/fail2ban.conf
-fail2ban/tests/config/filter.d/simple.conf
-fail2ban/tests/config/action.d/brokenaction.conf
-setup.py
-setup.cfg
-fail2ban/__init__.py
-fail2ban/exceptions.py
-fail2ban/helpers.py
+fail2ban/tests/files/logs/zzz-generic-example
+fail2ban/tests/files/testcase01.log
+fail2ban/tests/files/testcase02.log
+fail2ban/tests/files/testcase03.log
+fail2ban/tests/files/testcase04.log
+fail2ban/tests/files/testcase-journal.log
+fail2ban/tests/files/testcase-multiline.log
+fail2ban/tests/files/testcase-usedns.log
+fail2ban/tests/files/testcase-wrong-char.log
+fail2ban/tests/filtertestcase.py
+fail2ban/tests/__init__.py
+fail2ban/tests/misctestcase.py
+fail2ban/tests/samplestestcase.py
+fail2ban/tests/servertestcase.py
+fail2ban/tests/sockettestcase.py
+fail2ban/tests/utils.py
 fail2ban/version.py
-fail2ban/protocol.py
-setup.py
-setup.cfg
-kill-server
-config/jail.conf
-config/fail2ban.conf
-config/filter.d/common.conf
-config/filter.d/apache-auth.conf
-config/filter.d/apache-badbots.conf
-config/filter.d/apache-botsearch.conf
-config/filter.d/apache-modsecurity.conf
-config/filter.d/apache-nohome.conf
-config/filter.d/apache-noscript.conf
-config/filter.d/apache-overflows.conf
-config/filter.d/nginx-http-auth.conf
-config/filter.d/counter-strike.conf
-config/filter.d/courier-auth.conf
-config/filter.d/courier-smtp.conf
-config/filter.d/cyrus-imap.conf
-config/filter.d/ejabberd-auth.conf
-config/filter.d/exim.conf
-config/filter.d/freeswitch.conf
-config/filter.d/gssftpd.conf
-config/filter.d/kerio.conf
-config/filter.d/horde.conf
-config/filter.d/suhosin.conf
-config/filter.d/nagios.conf
-config/filter.d/named-refused.conf
-config/filter.d/nsd.conf
-config/filter.d/openwebmail.conf
-config/filter.d/pam-generic.conf
-config/filter.d/php-url-fopen.conf
-config/filter.d/postfix-sasl.conf
-config/filter.d/pam-generic.conf
-config/filter.d/php-url-fopen.conf
-config/filter.d/postfix-sasl.conf
-config/filter.d/postfix.conf
-config/filter.d/proftpd.conf
-config/filter.d/pure-ftpd.conf
-config/filter.d/qmail.conf
-config/filter.d/pam-generic.conf
-config/filter.d/php-url-fopen.conf
-config/filter.d/postfix-sasl.conf
-config/filter.d/sendmail-auth.conf
-config/filter.d/sendmail-reject.conf
-config/filter.d/sieve.conf
-config/filter.d/solid-pop3d.conf
-config/filter.d/squid.conf
-config/filter.d/sshd.conf
-config/filter.d/sshd-ddos.conf
-config/filter.d/stunnel.conf
-config/filter.d/vsftpd.conf
-config/filter.d/webmin-auth.conf
-config/filter.d/wuftpd.conf
-config/filter.d/xinetd-fail.conf
-config/filter.d/asterisk.conf
-config/filter.d/dovecot.conf
-config/filter.d/dropbear.conf
-config/filter.d/lighttpd-auth.conf
-config/filter.d/recidive.conf
-config/filter.d/roundcube-auth.conf
-config/filter.d/assp.conf
-config/filter.d/sogo-auth.conf
-config/filter.d/mysqld-auth.conf
-config/filter.d/selinux-common.conf
-config/filter.d/selinux-ssh.conf
-config/filter.d/3proxy.conf
-config/filter.d/apache-common.conf
-config/filter.d/exim-common.conf
-config/filter.d/exim-spam.conf
-config/filter.d/freeswitch.conf
-config/filter.d/groupoffice.conf
-config/filter.d/perdition.conf
-config/filter.d/uwimap-auth.conf
-config/filter.d/courier-auth.conf
-config/filter.d/courier-smtp.conf
-config/filter.d/ejabberd-auth.conf
-config/filter.d/guacamole.conf
-config/filter.d/sendmail-spam.conf
-config/action.d/apf.conf
-config/action.d/blocklist_de.conf
-config/action.d/osx-afctl.conf
-config/action.d/osx-ipfw.conf
-config/action.d/sendmail-common.conf
-config/action.d/badips.conf
-config/action.d/bsd-ipfw.conf
-config/action.d/dummy.conf
-config/action.d/firewallcmd-new.conf
-config/action.d/firewallcmd-ipset.conf
-config/action.d/iptables-ipset-proto6-allports.conf
-config/action.d/iptables-common.conf
-config/action.d/iptables-ipset-proto4.conf
-config/action.d/iptables-ipset-proto6.conf
-config/action.d/iptables-xt_recent-echo.conf
-config/action.d/route.conf
-config/action.d/complain.conf
-config/action.d/dshield.conf
-config/action.d/hostsdeny.conf
-config/action.d/ipfw.conf
-config/action.d/ipfilter.conf
-config/action.d/iptables.conf
-config/action.d/iptables-allports.conf
-config/action.d/iptables-multiport.conf
-config/action.d/iptables-multiport-log.conf
-config/action.d/iptables-new.conf
-config/action.d/mail.conf
-config/action.d/mail-buffered.conf
-config/action.d/mail-whois.conf
-config/action.d/mail-whois-lines.conf
-config/action.d/mynetwatchman.conf
-config/action.d/pf.conf
-config/action.d/sendmail.conf
-config/action.d/sendmail-buffered.conf
-config/action.d/sendmail-whois-ipmatches.conf
-config/action.d/sendmail-whois.conf
-config/action.d/sendmail-whois-lines.conf
-config/action.d/shorewall.conf
-config/action.d/xarf-login-attack.conf
-config/action.d/ufw.conf
-config/fail2ban.conf
-doc/run-rootless.txt
-man/fail2ban-client.1
-man/fail2ban.1
-man/jail.conf.5
-man/fail2ban-client.h2m
-man/fail2ban-server.1
-man/fail2ban-server.h2m
-man/fail2ban-regex.1
-man/fail2ban-regex.h2m
-man/generate-man
-files/gentoo-initd
+files/bash-completion
+files/cacti/cacti_host_template_fail2ban.xml
+files/cacti/fail2ban_stats.sh
+files/cacti/README
+files/debian-initd
+files/fail2ban-logrotate
+files/fail2ban.service
+files/fail2ban-tmpfiles.conf
+files/fail2ban.upstart
+files/gen_badbots
 files/gentoo-confd
-files/redhat-initd
+files/gentoo-initd
+files/ipmasq-ZZZzzz_fail2ban.rul
+files/logwatch/fail2ban
+files/logwatch/fail2ban-0.8.log
+files/logwatch/fail2ban-0.9.log
 files/macosx-initd
+files/monit/fail2ban
+files/nagios/check_fail2ban
+files/nagios/README
+files/redhat-initd
 files/solaris-fail2ban.xml
 files/solaris-svc-fail2ban
 files/suse-initd
-files/fail2ban-logrotate
-files/cacti/fail2ban_stats.sh
-files/cacti/cacti_host_template_fail2ban.xml
-files/cacti/README
-files/nagios/check_fail2ban
-files/nagios/README
-files/bash-completion
-files/fail2ban-tmpfiles.conf
-files/fail2ban.service
-files/ipmasq-ZZZzzz_fail2ban.rul
-files/gen_badbots
+FILTERS
+kill-server
+man/fail2ban.1
+man/fail2ban-client.1
+man/fail2ban-client.h2m
+man/fail2ban-regex.1
+man/fail2ban-regex.h2m
+man/fail2ban-server.1
+man/fail2ban-server.h2m
+man/fail2ban-testcases.1
+man/fail2ban-testcases.h2m
+man/generate-man
+man/jail.conf.5
+.pylintrc
+README.md
+README.Solaris
+RELEASE
+setup.cfg
+setup.py
+THANKS
+TODO
+Vagrantfile

MANIFEST.in

@@ -1,4 +1,5 @@
-include ChangeLog COPYING DEVELOP FILTERS README.* THANKS TODO
+include ChangeLog COPYING DEVELOP FILTERS README.* THANKS TODO CONTRIBUTING* Vagrantfile
 graft doc
 graft files
 recursive-include config *.conf *.py
+recursive-include config/filter.d/ignorecommands *

README.md

@@ -2,17 +2,19 @@
                         / _|__ _(_) |_  ) |__  __ _ _ _  
                        |  _/ _` | | |/ /| '_ \/ _` | ' \ 
                        |_| \__,_|_|_/___|_.__/\__,_|_||_|
-                       v0.9.0                  2014/03/14
+                       v0.9.7                  2017/05/11
 
 ## Fail2Ban: ban hosts that cause multiple authentication errors
 
-Fail2Ban scans log files like /var/log/pwdfail and bans IP that makes too many
-password failures. It updates firewall rules to reject the IP address. These
-rules can be defined by the user. Fail2Ban can read multiple log files such as
-sshd or Apache web server ones.
+Fail2Ban scans log files like `/var/log/auth.log` and bans IP addresses having
+too many failed login attempts. It does this by updating system firewall rules
+to reject new connections from those IP addresses, for a configurable amount
+of time. Fail2Ban comes out-of-the-box ready to read many standard log files,
+such as those for sshd and Apache, and is easy to configure to read any log
+file you choose, for any error you choose.
 
-Fail2Ban is able to reduce the rate of incorrect authentications attempts
-however it cannot eliminate the risk that weak authentication presents.
+Though Fail2Ban is able to reduce the rate of incorrect authentications
+attempts, it cannot eliminate the risk that weak authentication presents.
 Configure services to use only two factor or public/private authentication
 mechanisms if you really want to protect services.
 
@@ -33,15 +35,16 @@ Optional:
   - Linux >= 2.6.13
 - [gamin >= 0.0.21](http://www.gnome.org/~veillard/gamin)
 - [systemd >= 204](http://www.freedesktop.org/wiki/Software/systemd)
+- [dnspython](http://www.dnspython.org/)
 
 To install, just do:
 
-    tar xvfj fail2ban-0.9.0.tar.bz2
-    cd fail2ban-0.9.0
+    tar xvfj fail2ban-0.9.6.tar.bz2
+    cd fail2ban-0.9.6
     python setup.py install
 
 This will install Fail2Ban into the python library directory. The executable
-scripts are placed into /usr/bin, and configuration under /etc/fail2ban.
+scripts are placed into `/usr/bin`, and configuration under `/etc/fail2ban`.
 
 Fail2Ban should be correctly installed now. Just type:
 
@@ -50,11 +53,20 @@ Fail2Ban should be correctly installed now. Just type:
 to see if everything is alright. You should always use fail2ban-client and
 never call fail2ban-server directly.
 
+Please note that the system init/service script is not automatically installed.
+To enable fail2ban as an automatic service, simply copy the script for your
+distro from the `files` directory to `/etc/init.d`. Example (on a Debian-based
+system):
+
+    cp files/debian-initd /etc/init.d/fail2ban
+    update-rc.d fail2ban defaults
+    service fail2ban start
+
 Configuration:
 --------------
 
-You can configure Fail2Ban using the files in /etc/fail2ban. It is possible to
-configure the server using commands sent to it by fail2ban-client. The
+You can configure Fail2Ban using the files in `/etc/fail2ban`. It is possible to
+configure the server using commands sent to it by `fail2ban-client`. The
 available commands are described in the fail2ban-client(1) manpage.  Also see
 fail2ban(1) and jail.conf(5)  manpages for further references.
 
@@ -65,6 +77,8 @@ Code status:
 
 * [![Coverage Status](https://coveralls.io/repos/fail2ban/fail2ban/badge.png?branch=master)](https://coveralls.io/r/fail2ban/fail2ban)
 
+* [![codecov.io](https://codecov.io/github/fail2ban/fail2ban/coverage.svg?branch=master)](https://codecov.io/github/fail2ban/fail2ban?branch=master)
+
 Contact:
 --------
 

RELEASE

@@ -47,6 +47,15 @@ Preparation
 
 * Ensure the MANIFEST is complete
 
+  ad-hoc bash script to run in a clean clone:
+
+     find -type f | grep -v -e '\.git' -e '/doc/' -e '\.travis' -e MANIFEST | sed -e 's,^\./,,g' | while read f; do grep -ne "^$f\$" MANIFEST >/dev/null || echo "$f" ; done
+
+  or an alternative for comparison with previous release
+
+     git diff 0.9.6 | grep -B2 'index 0000000..' | grep -B1 'new file mode' | sed -n -e '/^diff /s,.* b/,,gp' >> MANIFEST
+     sort MANIFEST | uniq | sponge MANIFEST
+
 * Run::
 
   python setup.py sdist
@@ -57,24 +66,24 @@ Preparation
 
   * Which indicates that testcases/files/logs/mysqld.log has been moved or is a directory::
 
-      tar -C /tmp -jxf dist/fail2ban-0.9.0.tar.bz2
+      tar -C /tmp -jxf dist/fail2ban-0.9.6.tar.bz2
 
-* clean up current direcory::
+* clean up current directory::
 
-    diff -rul --exclude \*.pyc . /tmp/fail2ban-0.9.0/
+    diff -rul --exclude \*.pyc . /tmp/fail2ban-0.9.6/
 
   * Only differences should be files that you don't want distributed.
 
 
 * Ensure the tests work from the tarball::
 
-    cd /tmp/fail2ban-0.9.0/ && export PYTHONPATH=`pwd` && bin/fail2ban-testcases
+    cd /tmp/fail2ban-0.9.6/ && bin/fail2ban-testcases
 
 * Add/finalize the corresponding entry in the ChangeLog
 
   * To generate a list of committers use e.g.::
 
-      git shortlog -sn 0.8.12.. | sed -e 's,^[ 0-9\t]*,,g' | tr '\n' '\|' | sed -e 's:|:, :g'
+      git shortlog -sn 0.9.6.. | sed -e 's,^[ 0-9\t]*,,g' | tr '\n' '\|' | sed -e 's:|:, :g'
 
   * Ensure the top of the ChangeLog has the right version and current date.
   * Ensure the top entry of the ChangeLog has the right version and current date.
@@ -97,7 +106,7 @@ Preparation
 * Tag the release by using a signed (and annotated) tag.  Cut/paste
   release ChangeLog entry as tag annotation::
 
-    git tag -s 0.9.1
+    git tag -s 0.9.6
 
 Pre Release
 ===========
@@ -112,7 +121,7 @@ Pre Release
 
     * http://packages.qa.debian.org/f/fail2ban.html
 
-  * FreeBSD: Christoph Theis theis@gmx.at>, Nick Hilliard <nick@foobar.org>
+  * FreeBSD: Christoph Theis theis@gmx.at>
 
     * http://svnweb.freebsd.org/ports/head/security/py-fail2ban/Makefile?view=markup
     * http://www.freebsd.org/cgi/query-pr-summary.cgi?text=fail2ban
@@ -140,7 +149,7 @@ Pre Release
 
     * https://bugs.mageia.org/buglist.cgi?quicksearch=fail2ban
 
-  * An potentially to the fail2ban-users email list.
+  * And potentially to the fail2ban-users email list.
 
 
 * Wait for feedback from distributors
@@ -181,17 +190,17 @@ Post Release
 
 Add the following to the top of the ChangeLog::
 
-  ver. 0.9.1 (2014/XX/XXX) - wanna-be-released
+  ver. 0.9.8 (2016/XX/XXX) - wanna-be-released
   -----------
   
-  - Fixes:
+  ### Fixes
   
-  - New Features:
+  ### New Features
   
-  - Enhancements:
+  ### Enhancements
 
 Alter the git shortlog command in the previous section to refer to the just
 released version.
 
-and adjust fail2ban/version.py to carry .dev suffix to signal
+and adjust fail2ban/version.py to carry .dev0 suffix to signal
 a version under development.

THANKS

@@ -6,13 +6,16 @@ the project.  If you have been left off, please let us know
 (preferably send a pull request on github with the "fix") and you will
 be added
 
+Aaron Brice
 Adam Tkac
 Adrien Clerc
 ache
 ag4ve (Shawn)
 Alasdair D. Campbell
+Alexandre Perrin (kAworu)
 Amir Caspi
 Amy
+Andrew St. Jean
 Andrey G. Grozin
 Andy Fragen
 Arturo 'Buanzo' Busleiman
@@ -26,16 +29,22 @@ Christian Rauch
 Christophe Carles
 Christoph Haas
 Christos Psonis
+craneworks
 Cyril Jaquier
 Daniel B. Cid
 Daniel B.
 Daniel Black
 David Nutter
+David Reagan (jerrac)
 Derek Atkins
+Donald Yandt
 Eric Gerbier
 Enrico Labedzki
+Eugene Hopkinson (SlowRiot)
 ftoppi
+Florian Robert (1technophile)
 François Boulogne
+Frantisek Sumsal
 Frédéric
 Georgiy Mernov
 Guilhem Lettron
@@ -59,12 +68,14 @@ Joël Bertrand
 JP Espinosa
 jserrachinha
 Justin Shore
+Kevin Locke
 Kévin Drapel
 kjohnsonecl
 kojiro
 Lars Kneschke
 Lee Clemens
 leftyfb (Mike Rushton)
+M. Maraun
 Manuel Arostegui Ramirez
 Marcel Dopita
 Mark Edgington
@@ -80,7 +91,10 @@ Michael Hanselmann
 Mika (mkl)
 Nick Munger
 onorua
+Orion Poplawski
+Pablo Rodriguez Fernandez
 Paul Marrapese
+Paul Traina
 Noel Butler
 Patrick Börjesson
 Pressy
@@ -101,8 +115,11 @@ Stefan Tatschner
 Stephen Gildea
 Steven Hiscocks
 TESTOVIK
+Thomas Mayer
 Tom Pike
+Tom Hendrikx
 Tomas Pihl
+Thomas Skierlo (phaleas)
 Tony Lawrence
 Tomasz Ciolek
 Tyler

bin/fail2ban-client

@@ -22,8 +22,17 @@ __author__ = "Cyril Jaquier"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"
 
-import sys, string, os, pickle, re, logging, signal
-import getopt, time, shlex, socket
+import getopt
+import logging
+import os
+import pickle
+import re
+import shlex
+import signal
+import socket
+import string
+import sys
+import time
 
 from fail2ban.version import version
 from fail2ban.protocol import printFormatted
@@ -144,32 +153,58 @@ class Fail2banClient:
 		return self.__processCmd([["ping"]], False)
 
 	def __processCmd(self, cmd, showRet = True):
-		beautifier = Beautifier()
-		streamRet = True
-		for c in cmd:
-			beautifier.setInputCmd(c)
-			try:
-				client = CSocket(self.__conf["socket"])
-				ret = client.send(c)
-				if ret[0] == 0:
-					logSys.debug("OK : " + `ret[1]`)
+		client = None
+		try:
+			beautifier = Beautifier()
+			streamRet = True
+			for c in cmd:
+				beautifier.setInputCmd(c)
+				try:
+					if not client:
+						client = CSocket(self.__conf["socket"])
+					ret = client.send(c)
+					if ret[0] == 0:
+						logSys.debug("OK : " + `ret[1]`)
+						if showRet:
+							print beautifier.beautify(ret[1])
+					else:
+						logSys.error("NOK: " + `ret[1].args`)
+						if showRet:
+							print beautifier.beautifyError(ret[1])
+						streamRet = False
+				except socket.error:
 					if showRet:
-						print beautifier.beautify(ret[1])
-				else:
-					logSys.error("NOK: " + `ret[1].args`)
+						self.__logSocketError()
+					return False
+				except Exception as e:
 					if showRet:
-						print beautifier.beautifyError(ret[1])
-					streamRet = False
-			except socket.error:
-				if showRet:
-					logSys.error("Unable to contact server. Is it running?")
-				return False
-			except Exception, e:
-				if showRet:
-					logSys.error(e)
-				return False
+						logSys.error(e)
+					return False
+		finally:
+			if client:
+				client.close()
 		return streamRet
 
+	def __logSocketError(self):
+		try:
+			if os.access(self.__conf["socket"], os.F_OK):
+				# This doesn't check if path is a socket,
+				#  but socket.error should be raised
+				if os.access(self.__conf["socket"], os.W_OK):
+					# Permissions look good, but socket.error was raised
+					logSys.error("Unable to contact server. Is it running?")
+				else:
+					logSys.error("Permission denied to socket: %s,"
+								 " (you must be root)", self.__conf["socket"])
+			else:
+				logSys.error("Failed to access socket path: %s."
+							 " Is fail2ban running?",
+							 self.__conf["socket"])
+		except Exception as e:
+			logSys.error("Exception while checking socket access: %s",
+						 self.__conf["socket"])
+			logSys.error(e)
+
 	##
 	# Process a command line.
 	#
@@ -341,8 +376,10 @@ class Fail2banClient:
 			logSys.setLevel(logging.WARNING)
 		elif verbose == 2:
 			logSys.setLevel(logging.INFO)
-		else:
+		elif verbose == 3:
 			logSys.setLevel(logging.DEBUG)
+		else:
+			logSys.setLevel(logging.HEAVYDEBUG)
 		# Add the default logging handler to dump to stderr
 		logout = logging.StreamHandler(sys.stderr)
 		# set a format which is simpler for console use
@@ -392,7 +429,7 @@ class Fail2banClient:
 						elif not cmd == "":
 							try:
 								self.__processCommand(shlex.split(cmd))
-							except Exception, e:
+							except Exception as e:
 								logSys.error(e)
 			except (EOFError, KeyboardInterrupt):
 				print
@@ -409,21 +446,21 @@ class Fail2banClient:
 		# TODO: get away from stew of return codes and exception
 		# handling -- handle via exceptions
 		try:
+			self.__configurator.Reload()
 			self.__configurator.readAll()
 			ret = self.__configurator.getOptions(jail)
 			self.__configurator.convertToProtocol()
 			self.__stream = self.__configurator.getConfigStream()
-		except Exception, e:
+		except Exception as e:
 			logSys.error("Failed during configuration: %s" % e)
 			ret = False
 		return ret
 
-	#@staticmethod
+	@staticmethod
 	def dumpConfig(cmd):
 		for c in cmd:
 			print c
 		return True
-	dumpConfig = staticmethod(dumpConfig)
 
 
 class ServerExecutionException(Exception):

bin/fail2ban-regex

@@ -29,545 +29,6 @@ __author__ = "Fail2Ban Developers"
 __copyright__ = "Copyright (c) 2004-2008 Cyril Jaquier, 2012-2014 Yaroslav Halchenko"
 __license__ = "GPL"
 
-import getopt, sys, time, logging, os, locale, shlex, time, urllib
-from optparse import OptionParser, Option
+from fail2ban.client.fail2banregex import exec_command_line
 
-from ConfigParser import NoOptionError, NoSectionError, MissingSectionHeaderError
-
-try:
-	from systemd import journal
-	from fail2ban.server.filtersystemd import FilterSystemd
-except ImportError:
-	journal = None
-
-from fail2ban.version import version
-from fail2ban.client.filterreader import FilterReader
-from fail2ban.server.filter import Filter
-from fail2ban.server.failregex import RegexException
-
-from fail2ban.helpers import FormatterWithTraceBack, getLogger
-# Gets the instance of the logger.
-logSys = getLogger("fail2ban")
-
-def debuggexURL(sample, regex):
-	q = urllib.urlencode({ 're': regex.replace('<HOST>', '(?&.ipv4)'),
-							'str': sample,
-							'flavor': 'python' })
-	return 'http://www.debuggex.com/?' + q
-
-def shortstr(s, l=53):
-	"""Return shortened string
-	"""
-	if len(s) > l:
-		return s[:l-3] + '...'
-	return s
-
-def pprint_list(l, header=None):
-	if not len(l):
-		return
-	if header:
-		s = "|- %s\n" % header
-	else:
-		s = ''
-	print s + "|  " + "\n|  ".join(l) + '\n`-'
-
-def file_lines_gen(hdlr):
-	for line in hdlr:
-		try:
-			line = line.decode(fail2banRegex.encoding, 'strict')
-		except UnicodeDecodeError:
-			if sys.version_info >= (3,): # Python 3 must be decoded
-				line = line.decode(fail2banRegex.encoding, 'ignore')
-		yield line
-
-def journal_lines_gen(myjournal):
-	while True:
-		try:
-			entry = myjournal.get_next()
-		except OSError:
-			continue
-		if not entry:
-			break
-		yield FilterSystemd.formatJournalEntry(entry)
-
-def get_opt_parser():
-	# use module docstring for help output
-	p = OptionParser(
-				usage="%s [OPTIONS] <LOG> <REGEX> [IGNOREREGEX]\n" % sys.argv[0] + __doc__
-				+ """
-LOG:
-    string                  a string representing a log line
-    filename                path to a log file (/var/log/auth.log)
-    "systemd-journal"       search systemd journal (systemd-python required)
-
-REGEX:
-    string                  a string representing a 'failregex'
-    filename                path to a filter file (filter.d/sshd.conf)
-
-IGNOREREGEX:
-    string                  a string representing an 'ignoreregex'
-    filename                path to a filter file (filter.d/sshd.conf)
-
-Copyright (c) 2004-2008 Cyril Jaquier, 2008- Fail2Ban Contributors
-Copyright of modifications held by their respective authors.
-Licensed under the GNU General Public License v2 (GPL).
-
-Written by Cyril Jaquier <cyril.jaquier@fail2ban.org>.
-Many contributions by Yaroslav O. Halchenko and Steven Hiscocks.
-
-Report bugs to https://github.com/fail2ban/fail2ban/issues
-""",
-				version="%prog " + version)
-
-	p.add_options([
-		Option("-d", "--datepattern",
-			   help="set custom pattern used to match date/times"),
-		Option("-e", "--encoding",
-			   help="File encoding. Default: system locale"),
-		Option("-L", "--maxlines", type=int, default=0,
-			   help="maxlines for multi-line regex"),
-		Option("-m", "--journalmatch",
-			   help="journalctl style matches overriding filter file. "
-			   "\"systemd-journal\" only"),
-		Option('-l', "--log-level", type="choice",
-			   dest="log_level",
-			   choices=('heavydebug', 'debug', 'info', 'notice', 'warning', 'error', 'critical'),
-			   default=None,
-			   help="Log level for the Fail2Ban logger to use"),
-		Option("-v", "--verbose", action='store_true',
-			   help="Be verbose in output"),
-		Option("-D", "--debuggex", action='store_true',
-			   help="Produce debuggex.com urls for debugging there"),
-		Option("--print-no-missed", action='store_true',
-			   help="Do not print any missed lines"),
-		Option("--print-no-ignored", action='store_true',
-			   help="Do not print any ignored lines"),
-		Option("--print-all-matched", action='store_true',
-			   help="Print all matched lines"),
-		Option("--print-all-missed", action='store_true',
-			   help="Print all missed lines, no matter how many"),
-		Option("--print-all-ignored", action='store_true',
-			   help="Print all ignored lines, no matter how many"),
-		Option("-t", "--log-traceback", action='store_true',
-			   help="Enrich log-messages with compressed tracebacks"),
-		Option("--full-traceback", action='store_true',
-			   help="Either to make the tracebacks full, not compressed (as by default)"),
-		])
-
-	return p
-
-
-class RegexStat(object):
-
-	def __init__(self, failregex):
-		self._stats = 0
-		self._failregex = failregex
-		self._ipList = list()
-
-	def __str__(self):
-		return "%s(%r) %d failed: %s" \
-		  % (self.__class__, self._failregex, self._stats, self._ipList)
-
-	def inc(self):
-		self._stats += 1
-
-	def getStats(self):
-		return self._stats
-
-	def getFailRegex(self):
-		return self._failregex
-
-	def appendIP(self, value):
-		self._ipList.append(value)
-
-	def getIPList(self):
-		return self._ipList
-
-
-class LineStats(object):
-	"""Just a convenience container for stats
-	"""
-	def __init__(self):
-		self.tested = self.matched = 0
-		self.matched_lines = []
-		self.missed = 0
-		self.missed_lines = []
-		self.missed_lines_timeextracted = []
-		self.ignored = 0
-		self.ignored_lines = []
-		self.ignored_lines_timeextracted = []
-
-	def __str__(self):
-		return "%(tested)d lines, %(ignored)d ignored, %(matched)d matched, %(missed)d missed" % self
-
-	# just for convenient str
-	def __getitem__(self, key):
-		return getattr(self, key)
-
-
-class Fail2banRegex(object):
-
-	def __init__(self, opts):
-		self._verbose = opts.verbose
-		self._debuggex = opts.debuggex
-		self._maxlines = 20
-		self._print_no_missed = opts.print_no_missed
-		self._print_no_ignored = opts.print_no_ignored
-		self._print_all_matched = opts.print_all_matched
-		self._print_all_missed = opts.print_all_missed
-		self._print_all_ignored = opts.print_all_ignored
-		self._maxlines_set = False		  # so we allow to override maxlines in cmdline
-		self._datepattern_set = False
-		self._journalmatch = None
-
-		self._filter = Filter(None)
-		self._ignoreregex = list()
-		self._failregex = list()
-		self._time_elapsed = None
-		self._line_stats = LineStats()
-
-		if opts.maxlines:
-			self.setMaxLines(opts.maxlines)
-		if opts.journalmatch is not None:
-			self.setJournalMatch(opts.journalmatch.split())
-		if opts.datepattern:
-			self.setDatePattern(opts.datepattern)
-		if opts.encoding:
-			self.encoding = opts.encoding
-		else:
-			self.encoding = locale.getpreferredencoding()
-
-
-
-	def setDatePattern(self, pattern):
-		if not self._datepattern_set:
-			self._filter.setDatePattern(pattern)
-			self._datepattern_set = True
-			if pattern is not None:
-				print "Use      datepattern : %s" % (
-					self._filter.getDatePattern()[1], )
-
-	def setMaxLines(self, v):
-		if not self._maxlines_set:
-			self._filter.setMaxLines(int(v))
-			self._maxlines_set = True
-			print "Use         maxlines : %d" % self._filter.getMaxLines()
-
-	def setJournalMatch(self, v):
-		if self._journalmatch is None:
-			self._journalmatch = v
-
-	def readRegex(self, value, regextype):
-		assert(regextype in ('fail', 'ignore'))
-		regex = regextype + 'regex'
-		if os.path.isfile(value):
-			print "Use %11s file : %s" % (regex, value)
-			reader = FilterReader(value, 'fail2ban-regex-jail', {})
-			reader.setBaseDir(None)
-
-			if reader.readexplicit():
-				reader.getOptions(None)
-				readercommands = reader.convert()
-				regex_values = [
-					RegexStat(m[3])
-					for m in filter(
-						lambda x: x[0] == 'set' and x[2] == "add%sregex" % regextype,
-						readercommands)]
-				# Read out and set possible value of maxlines
-				for command in readercommands:
-					if command[2] == "maxlines":
-						maxlines = int(command[3])
-						try:
-							self.setMaxLines(maxlines)
-						except ValueError:
-							print "ERROR: Invalid value for maxlines (%(maxlines)r) " \
-								  "read from %(value)s" % locals()
-							return False
-					elif command[2] == 'addjournalmatch':
-						journalmatch = command[3]
-						self.setJournalMatch(shlex.split(journalmatch))
-					elif command[2] == 'datepattern':
-						datepattern = command[3]
-						self.setDatePattern(datepattern)
-			else:
-				print "ERROR: failed to read %s" % value
-				return False
-		else:
-			print "Use %11s line : %s" % (regex, shortstr(value))
-			regex_values = [RegexStat(value)]
-
-		setattr(self, "_" + regex, regex_values)
-		for regex in regex_values:
-			getattr(
-				self._filter,
-				'add%sRegex' % regextype.title())(regex.getFailRegex())
-		return True
-
-	def testIgnoreRegex(self, line):
-		found = False
-		try:
-			ret = self._filter.ignoreLine([(line, "", "")])
-			if ret is not None:
-				found = True
-				regex = self._ignoreregex[ret].inc()
-		except RegexException, e:
-			print e
-			return False
-		return found
-
-	def testRegex(self, line, date=None):
-		orgLineBuffer = self._filter._Filter__lineBuffer
-		fullBuffer = len(orgLineBuffer) >= self._filter.getMaxLines()
-		try:
-			line, ret = self._filter.processLine(line, date, checkAllRegex=True)
-			for match in ret:
-				# Append True/False flag depending if line was matched by
-				# more than one regex
-				match.append(len(ret)>1)
-				regex = self._failregex[match[0]]
-				regex.inc()
-				regex.appendIP(match)
-		except RegexException, e:
-			print e
-			return False
-		except IndexError:
-			print "Sorry, but no <HOST> found in regex"
-			return False
-		for bufLine in orgLineBuffer[int(fullBuffer):]:
-			if bufLine not in self._filter._Filter__lineBuffer:
-				try:
-					self._line_stats.missed_lines.pop(
-						self._line_stats.missed_lines.index("".join(bufLine)))
-					self._line_stats.missed_lines_timeextracted.pop(
-						self._line_stats.missed_lines_timeextracted.index(
-							"".join(bufLine[::2])))
-				except ValueError:
-					pass
-				else:
-					self._line_stats.matched += 1
-					self._line_stats.missed -= 1
-		return line, ret
-
-	def process(self, test_lines):
-		t0 = time.time()
-		for line_no, line in enumerate(test_lines):
-			if isinstance(line, tuple):
-				line_datetimestripped, ret = fail2banRegex.testRegex(
-					line[0], line[1])
-				line = "".join(line[0])
-			else:
-				line = line.rstrip('\r\n')
-				if line.startswith('#') or not line:
-					# skip comment and empty lines
-					continue
-				line_datetimestripped, ret = fail2banRegex.testRegex(line)
-			is_ignored = fail2banRegex.testIgnoreRegex(line_datetimestripped)
-
-			if is_ignored:
-				self._line_stats.ignored += 1
-				if not self._print_no_ignored and (self._print_all_ignored or self._line_stats.ignored <= self._maxlines + 1):
-					self._line_stats.ignored_lines.append(line)
-					self._line_stats.ignored_lines_timeextracted.append(line_datetimestripped)
-
-			if len(ret) > 0:
-				assert(not is_ignored)
-				self._line_stats.matched += 1
-				if self._print_all_matched:
-					self._line_stats.matched_lines.append(line)
-			else:
-				if not is_ignored:
-					self._line_stats.missed += 1
-					if not self._print_no_missed and (self._print_all_missed or self._line_stats.missed <= self._maxlines + 1):
-						self._line_stats.missed_lines.append(line)
-						self._line_stats.missed_lines_timeextracted.append(line_datetimestripped)
-			self._line_stats.tested += 1
-
-			if line_no % 10 == 0 and self._filter.dateDetector is not None:
-				self._filter.dateDetector.sortTemplate()
-		self._time_elapsed = time.time() - t0
-
-
-
-	def printLines(self, ltype):
-		lstats = self._line_stats
-		assert(self._line_stats.missed == lstats.tested - (lstats.matched + lstats.ignored))
-		lines = lstats[ltype]
-		l = lstats[ltype + '_lines']
-		if lines:
-			header = "%s line(s):" % (ltype.capitalize(),)
-			if self._debuggex:
-				if ltype == 'missed' or ltype == 'matched':
-					regexlist = self._failregex
-				else:
-					regexlist = self._ignoreregex
-				l = lstats[ltype + '_lines_timeextracted']
-				if lines < self._maxlines or getattr(self, '_print_all_' + ltype):
-					ans = [[]]
-					for arg in [l, regexlist]:
-						ans = [ x + [y] for x in ans for y in arg ]
-					b = map(lambda a: a[0] +  ' | ' + a[1].getFailRegex() + ' |  ' + debuggexURL(a[0], a[1].getFailRegex()), ans)
-					pprint_list([x.rstrip() for x in b], header)
-				else:
-					print "%s too many to print.  Use --print-all-%s " \
-						  "to print all %d lines" % (header, ltype, lines)
-			elif lines < self._maxlines or getattr(self, '_print_all_' + ltype):
-				pprint_list([x.rstrip() for x in l], header)
-			else:
-				print "%s too many to print.  Use --print-all-%s " \
-					  "to print all %d lines" % (header, ltype, lines)
-
-	def printStats(self):
-		print
-		print "Results"
-		print "======="
-
-		def print_failregexes(title, failregexes):
-			# Print title
-			total, out = 0, []
-			for cnt, failregex in enumerate(failregexes):
-				match = failregex.getStats()
-				total += match
-				if (match or self._verbose):
-					out.append("%2d) [%d] %s" % (cnt+1, match, failregex.getFailRegex()))
-
-				if self._verbose and len(failregex.getIPList()):
-					for ip in failregex.getIPList():
-						timeTuple = time.localtime(ip[2])
-						timeString = time.strftime("%a %b %d %H:%M:%S %Y", timeTuple)
-						out.append(
-							"    %s  %s%s" % (
-								ip[1],
-								timeString,
-								ip[-1] and " (multiple regex matched)" or ""))
-
-			print "\n%s: %d total" % (title, total)
-			pprint_list(out, " #) [# of hits] regular expression")
-			return total
-
-		# Print title
-		total = print_failregexes("Failregex", self._failregex)
-		_ = print_failregexes("Ignoreregex", self._ignoreregex)
-
-
-		if self._filter.dateDetector is not None:
-			print "\nDate template hits:"
-			out = []
-			for template in self._filter.dateDetector.templates:
-				if self._verbose or template.hits:
-					out.append("[%d] %s" % (
-						template.hits, template.name))
-			pprint_list(out, "[# of hits] date format")
-
-		print "\nLines: %s" % self._line_stats,
-		if self._time_elapsed is not None:
-			print "[processed in %.2f sec]" % self._time_elapsed,
-		print
-
-		if self._print_all_matched:
-			self.printLines('matched')
-		if not self._print_no_ignored:
-			self.printLines('ignored')
-		if not self._print_no_missed:
-			self.printLines('missed')
-
-		return True
-
-
-if __name__ == "__main__":
-
-	parser = get_opt_parser()
-	(opts, args) = parser.parse_args()
-	if opts.print_no_missed and opts.print_all_missed:
-		sys.stderr.write("ERROR: --print-no-missed and --print-all-missed are mutually exclusive.\n\n")
-		parser.print_help()
-		sys.exit(-1)
-	if opts.print_no_ignored and opts.print_all_ignored:
-		sys.stderr.write("ERROR: --print-no-ignored and --print-all-ignored are mutually exclusive.\n\n")
-		parser.print_help()
-		sys.exit(-1)
-
-	print
-	print "Running tests"
-	print "============="
-	print
-
-	fail2banRegex = Fail2banRegex(opts)
-
-	# We need 2 or 3 parameters
-	if not len(args) in (2, 3):
-		sys.stderr.write("ERROR: provide both <LOG> and <REGEX>.\n\n")
-		parser.print_help()
-		sys.exit(-1)
-
-	# TODO: taken from -testcases -- move common functionality somewhere
-	if opts.log_level is not None: # pragma: no cover
-		# so we had explicit settings
-		logSys.setLevel(getattr(logging, opts.log_level.upper()))
-	else: # pragma: no cover
-		# suppress the logging but it would leave unittests' progress dots
-		# ticking, unless like with '-l critical' which would be silent
-		# unless error occurs
-		logSys.setLevel(getattr(logging, 'CRITICAL'))
-
-	# Add the default logging handler
-	stdout = logging.StreamHandler(sys.stdout)
-
-	fmt = 'D: %(message)s'
-
-	if opts.log_traceback:
-		Formatter = FormatterWithTraceBack
-		fmt = (opts.full_traceback and ' %(tb)s' or ' %(tbc)s') + fmt
-	else:
-		Formatter = logging.Formatter
-
-	# Custom log format for the verbose tests runs
-	if opts.verbose: # pragma: no cover
-		stdout.setFormatter(Formatter(' %(asctime)-15s %(thread)s' + fmt))
-	else: # pragma: no cover
-		# just prefix with the space
-		stdout.setFormatter(Formatter(fmt))
-	logSys.addHandler(stdout)
-
-	cmd_log, cmd_regex = args[:2]
-
-	fail2banRegex.readRegex(cmd_regex, 'fail') or sys.exit(-1)
-
-	if len(args) == 3:
-		fail2banRegex.readRegex(args[2], 'ignore') or sys.exit(-1)
-
-	if os.path.isfile(cmd_log):
-		try:
-			hdlr = open(cmd_log, 'rb')
-			print "Use         log file : %s" % cmd_log
-			print "Use         encoding : %s" % fail2banRegex.encoding
-			test_lines = file_lines_gen(hdlr)
-		except IOError, e:
-			print e
-			sys.exit(-1)
-	elif cmd_log == "systemd-journal":
-		if not journal:
-			print "Error: systemd library not found. Exiting..."
-			sys.exit(-1)
-		myjournal = journal.Reader(converters={'__CURSOR': lambda x: x})
-		journalmatch = fail2banRegex._journalmatch
-		fail2banRegex.setDatePattern(None)
-		if journalmatch:
-			try:
-				for element in journalmatch:
-					if element == "+":
-						myjournal.add_disjunction()
-					else:
-						myjournal.add_match(element)
-			except ValueError:
-				print "Error: Invalid journalmatch: %s" % shortstr(" ".join(journalmatch))
-				sys.exit(-1)
-		print "Use    journal match : %s" % " ".join(journalmatch)
-		test_lines = journal_lines_gen(myjournal)
-	else:
-		print "Use      single line : %s" % shortstr(cmd_log)
-		test_lines = [ cmd_log ]
-	print
-
-	fail2banRegex.process(test_lines)
-
-	fail2banRegex.printStats() or sys.exit(-1)
+exec_command_line()

bin/fail2ban-server

@@ -22,7 +22,9 @@ __author__ = "Cyril Jaquier"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"
 
-import getopt, sys, os
+import getopt
+import os
+import sys
 
 from fail2ban.version import version
 from fail2ban.server.server import Server
@@ -125,7 +127,7 @@ class Fail2banServer:
 								self.__conf["pidfile"],
 								self.__conf["force"])
 			return True
-		except Exception, e:
+		except Exception as e:
 			logSys.exception(e)
 			self.__server.quit()
 			return False

bin/fail2ban-testcases

@@ -25,7 +25,10 @@ __copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2012- Yaroslav Halchenko"
 __license__ = "GPL"
 
 import logging
-import unittest, sys, time, os
+import os
+import sys
+import time
+import unittest
 
 # Check if local fail2ban module exists, and use if it exists by 
 # modifying the path. This is such that tests can be used in dev
@@ -36,10 +39,18 @@ from fail2ban.version import version
 
 from fail2ban.tests.utils import gatherTests
 from fail2ban.helpers import FormatterWithTraceBack, getLogger
+from fail2ban.setup import updatePyExec
 from fail2ban.server.mytime import MyTime
 
 from optparse import OptionParser, Option
 
+# Update fail2ban-python env to current python version (where f2b-modules located/installed)
+bindir = os.path.dirname(
+	# __file__ seems to be overwritten sometimes on some python versions (e.g. bug of 2.6 by running under cProfile, etc.):
+	sys.argv[0] if os.path.basename(sys.argv[0]) == 'fail2ban-testcases' else __file__
+)
+updatePyExec(bindir)
+
 def get_opt_parser():
 	# use module docstring for help output
 	p = OptionParser(

config/action.d/badips.conf

@@ -1,6 +1,6 @@
 # Fail2ban reporting to badips.com
 #
-# Note: This reports and IP only and does not actually ban traffic. Use 
+# Note: This reports an IP only and does not actually ban traffic. Use
 # another action in the same jail if you want bans to occur.
 #
 # Set the category to the appropriate value before use.
@@ -10,7 +10,7 @@
 
 [Definition]
 
-actionban = curl --fail  --user-agent "fail2ban v0.8.12" http://www.badips.com/add/<category>/<ip>
+actionban = curl --fail  --user-agent "<agent>" http://www.badips.com/add/<category>/<ip>
 
 [Init]
 

config/action.d/badips.py

@@ -21,7 +21,6 @@ import sys
 if sys.version_info < (2, 7):
 	raise ImportError("badips.py action requires Python >= 2.7")
 import json
-from functools import partial
 import threading
 import logging
 if sys.version_info >= (3, ):
@@ -33,7 +32,7 @@ else:
 	from urllib import urlencode
 
 from fail2ban.server.actions import ActionBase
-from fail2ban.version import version as f2bVersion
+
 
 class BadIPsAction(ActionBase):
 	"""Fail2Ban action which reports bans to badips.com, and also
@@ -71,6 +70,9 @@ class BadIPsAction(ActionBase):
 	updateperiod : int, optional
 		Time in seconds between updating bad IPs blacklist.
 		Default 900 (15 minutes)
+	agent : str, optional
+		User agent transmitted to server.
+		Default `Fail2Ban/ver.`
 
 	Raises
 	------
@@ -78,14 +80,18 @@ class BadIPsAction(ActionBase):
 		If invalid `category`, `score`, `banaction` or `updateperiod`.
 	"""
 
+	TIMEOUT = 10
 	_badips = "http://www.badips.com"
-	_Request = partial(
-		Request, headers={'User-Agent': "Fail2Ban %s" % f2bVersion})
+	def _Request(self, url, **argv):
+		return Request(url, headers={'User-Agent': self.agent}, **argv)
 
 	def __init__(self, jail, name, category, score=3, age="24h", key=None,
-		banaction=None, bancategory=None, bankey=None, updateperiod=900):
+		banaction=None, bancategory=None, bankey=None, updateperiod=900, agent="Fail2Ban", 
+		timeout=TIMEOUT):
 		super(BadIPsAction, self).__init__(jail, name)
 
+		self.timeout = timeout
+		self.agent = agent
 		self.category = category
 		self.score = score
 		self.age = age
@@ -111,10 +117,12 @@ class BadIPsAction(ActionBase):
 		------
 		HTTPError
 			Any issues with badips.com request.
+		ValueError
+			If badips.com response didn't contain necessary information
 		"""
 		try:
 			response = urlopen(
-				self._Request("/".join([self._badips, "get", "categories"])))
+				self._Request("/".join([self._badips, "get", "categories"])), timeout=self.timeout)
 		except HTTPError as response:
 			messages = json.loads(response.read().decode('utf-8'))
 			self._logSys.error(
@@ -122,7 +130,13 @@ class BadIPsAction(ActionBase):
 				messages['err'])
 			raise
 		else:
-			categories = json.loads(response.read().decode('utf-8'))['categories']
+			response_json = json.loads(response.read().decode('utf-8'))
+			if not 'categories' in response_json:
+				err = "badips.com response lacked categories specification. Response was: %s" \
+				  % (response_json,)
+				self._logSys.error(err)
+				raise ValueError(err)
+			categories = response_json['categories']
 			categories_names = set(
 				value['Name'] for value in categories)
 			if incParents:
@@ -162,7 +176,7 @@ class BadIPsAction(ActionBase):
 				urlencode({'age': age})])
 			if key:
 				url = "&".join([url, urlencode({'key': key})])
-			response = urlopen(self._Request(url))
+			response = urlopen(self._Request(url), timeout=self.timeout)
 		except HTTPError as response:
 			messages = json.loads(response.read().decode('utf-8'))
 			self._logSys.error(
@@ -347,7 +361,7 @@ class BadIPsAction(ActionBase):
 			url = "/".join([self._badips, "add", self.category, aInfo['ip']])
 			if self.key:
 				url = "?".join([url, urlencode({'key': self.key})])
-			response = urlopen(self._Request(url))
+			response = urlopen(self._Request(url), timeout=self.timeout)
 		except HTTPError as response:
 			messages = json.loads(response.read().decode('utf-8'))
 			self._logSys.error(

config/action.d/blocklist_de.conf

@@ -54,7 +54,7 @@ actioncheck =
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = curl --fail --data-urlencode 'server=<email>' --data 'apikey=<apikey>' --data 'service=<service>' --data 'ip=<ip>' --data-urlencode 'logs=<matches>' --data 'format=text' --user-agent "fail2ban v0.8.12" "https://www.blocklist.de/en/httpreports.html"
+actionban = curl --fail --data-urlencode 'server=<email>' --data 'apikey=<apikey>' --data 'service=<service>' --data 'ip=<ip>' --data-urlencode 'logs=<matches>' --data 'format=text' --user-agent "<agent>" "https://www.blocklist.de/en/httpreports.html"
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the

config/action.d/bsd-ipfw.conf

@@ -38,7 +38,7 @@ actioncheck =
 # Values:  CMD
 #
 # requires an ipfw rule like "deny ip from table(1) to me"
-actionban = ipfw table <table> add <ip>
+actionban = e=`ipfw table <table> add <ip> 2>&1`; x=$?; [ $x -eq 0 -o "$e" = 'ipfw: setsockopt(IP_FW_TABLE_XADD): File exists' ] || { echo "$e" 1>&2; exit $x; }
 
 
 # Option:  actionunban
@@ -47,7 +47,7 @@ actionban = ipfw table <table> add <ip>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = ipfw table <table> delete <ip>
+actionunban = e=`ipfw table <table> delete <ip> 2>&1`; x=$?; [ $x -eq 0 -o "$e" = 'ipfw: setsockopt(IP_FW_TABLE_XDEL): No such process' ] || { echo "$e" 1>&2; exit $x; }
 
 [Init]
 # Option:  table

config/action.d/cloudflare.conf

@@ -1,10 +1,16 @@
 #
 # Author: Mike Rushton
 #
-# Referenced from from http://www.normyee.net/blog/2012/02/02/adding-cloudflare-support-to-fail2ban by NORM YEE
+# IMPORTANT
 #
-# To get your Cloudflare API key: https://www.cloudflare.com/my-account
+# Please set jail.local's permission to 640 because it contains your CF API key.
 #
+# This action depends on curl.
+# Referenced from http://www.normyee.net/blog/2012/02/02/adding-cloudflare-support-to-fail2ban by NORM YEE
+#
+# To get your CloudFlare API Key: https://www.cloudflare.com/a/account/my-account
+#
+# CloudFlare API error codes: https://www.cloudflare.com/docs/host-api.html#s4.2
 
 [Definition]
 
@@ -34,7 +40,8 @@ actioncheck =
 #          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionban = curl https://www.cloudflare.com/api_json.html -d 'a=ban' -d 'tkn=<cftoken>' -d 'email=<cfuser>' -d 'key=<ip>'
+actionban = curl -s -o /dev/null https://www.cloudflare.com/api_json.html -d 'a=ban' -d 'tkn=<cftoken>' -d 'email=<cfuser>' -d 'key=<ip>'
+
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
 #          command is executed with Fail2Ban user rights.
@@ -43,13 +50,19 @@ actionban = curl https://www.cloudflare.com/api_json.html -d 'a=ban' -d 'tkn=<cf
 #          <time>  unix timestamp of the ban time
 # Values:  CMD
 #
-actionunban = curl https://www.cloudflare.com/api_json.html -d 'a=nul' -d 'tkn=<cftoken>' -d 'email=<cfuser>' -d 'key=<ip>'
-
+actionunban = curl -s -o /dev/null https://www.cloudflare.com/api_json.html -d 'a=nul' -d 'tkn=<cftoken>' -d 'email=<cfuser>' -d 'key=<ip>'
 
 [Init]
 
-# Default Cloudflare API token 
-cftoken = 
+# If you like to use this action with mailing whois lines, you could use the composite action
+# action_cf_mwl predefined in jail.conf, just define in your jail:
+#
+# action = %(action_cf_mwl)s
+# # Your CF account e-mail
+# cfemail  = 
+# # Your CF API Key
+# cfapikey = 
 
-# Default Cloudflare username
-cfuser = 
+cftoken =
+
+cfuser =

config/action.d/firewallcmd-allports.conf

@@ -0,0 +1,53 @@
+# Fail2Ban configuration file
+#
+# Author: Donald Yandt 
+# Because of the --remove-rules in stop this action requires firewalld-0.3.8+
+
+
+[INCLUDES]
+
+before = iptables-common.conf
+
+[Definition]
+
+actionstart = firewall-cmd --direct --add-chain ipv4 filter f2b-<name>
+              firewall-cmd --direct --add-rule ipv4 filter f2b-<name> 1000 -j RETURN
+              firewall-cmd --direct --add-rule ipv4 filter <chain> 0 -j f2b-<name>
+
+actionstop = firewall-cmd --direct --remove-rule ipv4 filter <chain> 0 -j f2b-<name>
+             firewall-cmd --direct --remove-rules ipv4 filter f2b-<name>
+             firewall-cmd --direct --remove-chain ipv4 filter f2b-<name>
+
+
+# Example actioncheck: firewall-cmd --direct --get-chains ipv4 filter | sed -e 's, ,\n,g' | grep -q '^f2b-recidive$'
+
+actioncheck = firewall-cmd --direct --get-chains ipv4 filter | sed -e 's, ,\n,g' | grep -q '^f2b-<name>$'
+
+actionban = firewall-cmd --direct --add-rule ipv4 filter f2b-<name> 0 -s <ip> -j <blocktype>
+
+actionunban = firewall-cmd --direct --remove-rule ipv4 filter f2b-<name> 0 -s <ip> -j <blocktype>
+
+[Init]
+
+# Default name of the chain
+#
+name = default
+
+chain = INPUT_direct
+
+# DEV NOTES:
+#
+# Author: Donald Yandt 
+# Uses "FirewallD" instead of the "iptables daemon".
+#
+#
+# Output:
+
+# actionstart:
+# $ firewall-cmd --direct --add-chain ipv4 filter f2b-recidive
+# success
+# $ firewall-cmd --direct --add-rule ipv4 filter f2b-recidive 1000 -j RETURN
+# success
+# $ sudo firewall-cmd --direct --add-rule ipv4 filter INPUT_direct 0 -j f2b-recidive
+# success
+

config/action.d/firewallcmd-multiport.conf

@@ -0,0 +1,63 @@
+# Fail2Ban configuration file
+#
+# Author: Donald Yandt 
+# Because of the --remove-rules in stop this action requires firewalld-0.3.8+
+
+[INCLUDES]
+
+before = iptables-common.conf
+
+[Definition]
+
+actionstart = firewall-cmd --direct --add-chain ipv4 filter f2b-<name>
+              firewall-cmd --direct --add-rule ipv4 filter f2b-<name> 1000 -j RETURN
+              firewall-cmd --direct --add-rule ipv4 filter <chain> 0 -m conntrack --ctstate NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
+
+actionstop = firewall-cmd --direct --remove-rule ipv4 filter <chain> 0 -m conntrack --ctstate NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
+             firewall-cmd --direct --remove-rules ipv4 filter f2b-<name>
+             firewall-cmd --direct --remove-chain ipv4 filter f2b-<name>
+
+# Example actioncheck: firewall-cmd --direct --get-chains ipv4 filter | sed -e 's, ,\n,g' | grep -q '^f2b-apache-modsecurity$'
+
+actioncheck = firewall-cmd --direct --get-chains ipv4 filter | sed -e 's, ,\n,g' | grep -q '^f2b-<name>$'
+
+actionban = firewall-cmd --direct --add-rule ipv4 filter f2b-<name> 0 -s <ip> -j <blocktype>
+
+actionunban = firewall-cmd --direct --remove-rule ipv4 filter f2b-<name> 0 -s <ip> -j <blocktype>
+
+[Init]
+
+# Default name of the chain
+name = default
+
+chain = INPUT_direct
+
+# Could also use port numbers separated by a comma. 
+port = 1:65535
+
+
+# Option:  protocol
+# Values:  [ tcp | udp | icmp | all ]
+
+protocol = tcp
+
+
+
+# DEV NOTES:
+#
+# Author: Donald Yandt 
+# Uses "FirewallD" instead of the "iptables daemon".
+#
+#
+# Output:
+# actionstart:
+# $ firewall-cmd --direct --add-chain ipv4 filter f2b-apache-modsecurity
+# success
+# $ firewall-cmd --direct --add-rule ipv4 filter f2b-apache-modsecurity 1000 -j RETURN
+# success
+# $ sudo firewall-cmd --direct --add-rule ipv4 filter INPUT_direct 0 -m state --state NEW -p tcp -m multiport --dports 80,443 -j f2b-apache-modsecurity
+# success
+# actioncheck:
+# $ firewall-cmd --direct --get-chains ipv4 filter f2b-apache-modsecurity | sed -e 's, ,\n,g' | grep -q '^f2b-apache-modsecurity$'
+# f2b-apache-modsecurity
+

config/action.d/firewallcmd-new.conf

@@ -10,9 +10,9 @@ before = iptables-common.conf
 
 actionstart = firewall-cmd --direct --add-chain ipv4 filter f2b-<name>
               firewall-cmd --direct --add-rule ipv4 filter f2b-<name> 1000 -j RETURN
-              firewall-cmd --direct --add-rule ipv4 filter <chain> 0 -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
+              firewall-cmd --direct --add-rule ipv4 filter <chain> 0 -m state --state NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
 
-actionstop = firewall-cmd --direct --remove-rule ipv4 filter <chain> 0 -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
+actionstop = firewall-cmd --direct --remove-rule ipv4 filter <chain> 0 -m state --state NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
              firewall-cmd --direct --remove-rules ipv4 filter f2b-<name>
              firewall-cmd --direct --remove-chain ipv4 filter f2b-<name>
 
@@ -43,7 +43,7 @@ chain = INPUT_direct
 # success
 # $ firewall-cmd --direct --add-rule ipv4 filter fail2ban-name 1000 -j RETURN
 # success
-# $ sudo firewall-cmd --direct --add-rule ipv4 filter INPUT_direct 0 -m state --state NEW -p tcp --dport 22 -j fail2ban-name
+# $ sudo firewall-cmd --direct --add-rule ipv4 filter INPUT_direct 0 -m state --state NEW -p tcp -m multiport --dports 22 -j fail2ban-name
 # success
 # $ firewall-cmd --direct --get-chains ipv4 filter
 # fail2ban-name

config/action.d/firewallcmd-rich-logging.conf

@@ -0,0 +1,65 @@
+# Fail2Ban configuration file
+#
+# Author: Donald Yandt 
+# 
+# Because of the rich rule commands requires firewalld-0.3.1+
+# This action uses firewalld rich-rules which gives you a cleaner iptables since it stores rules according to zones and not
+# by chain. So for an example all deny rules will be listed under <zone>_deny and all log rules under <zone>_log. 
+#
+# Also this action logs banned access attempts so you can filter that and increase ban time for offenders.
+#
+# If you use the --permanent rule you get a xml file in /etc/firewalld/zones/<zone>.xml that can be shared and parsed easliy
+#
+# Example commands to view rules:
+# firewall-cmd [--zone=<zone>] --list-rich-rules
+# firewall-cmd [--zone=<zone>] --list-all
+# firewall-cmd [--zone=zone] --query-rich-rule='rule'
+
+[Definition]
+
+actionstart = 
+
+actionstop = 
+
+actioncheck = 
+
+# you can also use zones and/or service names. 
+#
+# zone example: 
+# 	firewall-cmd --zone=<zone> --add-rich-rule="rule family='ipv4' source address='<ip>' port port='<port>' protocol='<protocol>' log prefix='f2b-<name>' level='<level>' limit value='<rate>/m' <blocktype>"
+# service name example:
+#	firewall-cmd --zone=<zone> --add-rich-rule="rule family='ipv4' source address='<ip>' service name='<service>' log prefix='f2b-<name>' level='<level>' limit value='<rate>/m' <blocktype>"
+# Because rich rules can only handle single or a range of ports we must split ports and execute the command for each port. Ports can be single and ranges separated by a comma or space for an example: http, https, 22-60, 18 smtp 
+
+actionban = ports="<port>"; for p in $(echo $ports | tr ", " " "); do firewall-cmd --add-rich-rule="rule family='ipv4' source address='<ip>' port port='$p' protocol='<protocol>' log prefix='f2b-<name>' level='<level>' limit value='<rate>/m' <blocktype>"; done
+	   
+actionunban = ports="<port>"; for p in $(echo $ports | tr ", " " "); do firewall-cmd --remove-rich-rule="rule family='ipv4' source address='<ip>' port port='$p' protocol='<protocol>' log prefix='f2b-<name>' level='<level>' limit value='<rate>/m' <blocktype>"; done
+
+[Init]
+
+name = default
+
+# log levels are "emerg", "alert", "crit", "error", "warning", "notice", "info" or "debug"
+level = info
+
+# log rate per minute
+rate = 1
+
+zone = public
+
+# use command firewall-cmd --get-services to see a list of services available
+#
+# Examples:
+#
+# amanda-client amanda-k5-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns freeipa-ldap freeipa-ldaps 
+# freeipa-replication ftp high-availability http https imaps ipp ipp-client ipsec iscsi-target kadmin kerberos 
+# kpasswd ldap ldaps libvirt libvirt-tls mdns mosh mountd ms-wbt mysql nfs ntp openvpn pmcd pmproxy pmwebapi pmwebapis pop3s 
+# postgresql privoxy proxy-dhcp puppetmaster radius rpc-bind rsyncd samba samba-client sane smtp squid ssh synergy 
+# telnet tftp tftp-client tinc tor-socks transmission-client vdsm vnc-server wbem-https xmpp-bosh xmpp-client xmpp-local xmpp-server
+
+service = ssh
+
+# reject types: 'icmp-net-unreachable', 'icmp-host-unreachable', 'icmp-port-unreachable', 'icmp-proto-unreachable', 
+# 'icmp-net-prohibited', 'icmp-host-prohibited', 'icmp-admin-prohibited' or 'tcp-reset'
+
+blocktype = reject type='icmp-port-unreachable'

config/action.d/firewallcmd-rich-rules.conf

@@ -0,0 +1,57 @@
+# Fail2Ban configuration file
+#
+# Author: Donald Yandt 
+# 
+# Because of the rich rule commands requires firewalld-0.3.1+
+# This action uses firewalld rich-rules which gives you a cleaner iptables since it stores rules according to zones and not
+# by chain. So for an example all deny rules will be listed under <zone>_deny. 
+#
+# If you use the --permanent rule you get a xml file in /etc/firewalld/zones/<zone>.xml that can be shared and parsed easliy
+#
+# Example commands to view rules:
+# firewall-cmd [--zone=<zone>] --list-rich-rules
+# firewall-cmd [--zone=<zone>] --list-all
+# firewall-cmd [--zone=zone] --query-rich-rule='rule'
+
+[Definition]
+
+actionstart = 
+
+actionstop = 
+
+actioncheck = 
+
+#you can also use zones and/or service names. 
+#
+# zone example: 
+# 	firewall-cmd --zone=<zone> --add-rich-rule="rule family='ipv4' source address='<ip>' port port='<port>' protocol='<protocol>' <blocktype>"
+# service name example:
+#	firewall-cmd --zone=<zone> --add-rich-rule="rule family='ipv4' source address='<ip>' service name='<service>' <blocktype>"
+# Because rich rules can only handle single or a range of ports we must split ports and execute the command for each port. Ports can be single and ranges separated by a comma or space for an example: http, https, 22-60, 18 smtp 
+
+actionban = ports="<port>"; for p in $(echo $ports | tr ", " " "); do firewall-cmd --add-rich-rule="rule family='ipv4' source address='<ip>' port port='$p' protocol='<protocol>' <blocktype>"; done
+	   
+actionunban = ports="<port>"; for p in $(echo $ports | tr ", " " "); do firewall-cmd --remove-rich-rule="rule family='ipv4' source address='<ip>' port port='$p' protocol='<protocol>' <blocktype>"; done
+
+[Init]
+
+name = default
+
+zone = public
+
+# use command firewall-cmd --get-services to see a list of services available
+#
+# Examples:
+#
+# amanda-client amanda-k5-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns freeipa-ldap freeipa-ldaps 
+# freeipa-replication ftp high-availability http https imaps ipp ipp-client ipsec iscsi-target kadmin kerberos 
+# kpasswd ldap ldaps libvirt libvirt-tls mdns mosh mountd ms-wbt mysql nfs ntp openvpn pmcd pmproxy pmwebapi pmwebapis pop3s 
+# postgresql privoxy proxy-dhcp puppetmaster radius rpc-bind rsyncd samba samba-client sane smtp squid ssh synergy 
+# telnet tftp tftp-client tinc tor-socks transmission-client vdsm vnc-server wbem-https xmpp-bosh xmpp-client xmpp-local xmpp-server
+
+service = ssh
+
+# reject types: 'icmp-net-unreachable', 'icmp-host-unreachable', 'icmp-port-unreachable', 'icmp-proto-unreachable', 
+# 'icmp-net-prohibited', 'icmp-host-prohibited', 'icmp-admin-prohibited' or 'tcp-reset'
+
+blocktype = reject type='icmp-port-unreachable'

config/action.d/iptables-allports.conf

@@ -17,23 +17,23 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> -p <protocol> -j f2b-<name>
+actionstart = <iptables> -N f2b-<name>
+              <iptables> -A f2b-<name> -j <returntype>
+              <iptables> -I <chain> -p <protocol> -j f2b-<name>
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -X f2b-<name>
+actionstop = <iptables> -D <chain> -p <protocol> -j f2b-<name>
+             <iptables> -F f2b-<name>
+             <iptables> -X f2b-<name>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -41,7 +41,7 @@ actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -49,7 +49,7 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
 
 [Init]
 

config/action.d/iptables-common.conf

@@ -43,3 +43,22 @@ protocol = tcp
 #          REJECT, REJECT --reject-with icmp-port-unreachable
 # Values:  STRING
 blocktype = REJECT --reject-with icmp-port-unreachable
+
+# Option:  returntype
+# Note:    This is the default rule on "actionstart". This should be RETURN
+#          in all (blocking) actions, except REJECT in allowing actions.
+# Values:  STRING
+returntype = RETURN
+
+# Option:  lockingopt
+# Notes.:  Option was introduced to iptables to prevent multiple instances from
+#          running concurrently and causing irratic behavior.  -w was introduced
+#          in iptables 1.4.20, so might be absent on older systems
+#          See https://github.com/fail2ban/fail2ban/issues/1122
+# Values:  STRING
+lockingopt = -w
+
+# Option:  iptables
+# Notes.:  Actual command to be executed, including common to all calls options
+# Values:  STRING
+iptables = iptables <lockingopt>

config/action.d/iptables-ipset-proto4.conf

@@ -28,13 +28,13 @@ before = iptables-common.conf
 # Values:  CMD
 #
 actionstart = ipset --create f2b-<name> iphash
-              iptables -I <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
+              <iptables> -I <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
+actionstop = <iptables> -D <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
              ipset --flush f2b-<name>
              ipset --destroy f2b-<name>
 

config/action.d/iptables-ipset-proto6-allports.conf

@@ -24,13 +24,13 @@ before = iptables-common.conf
 # Values:  CMD
 #
 actionstart = ipset create f2b-<name> hash:ip timeout <bantime>
-              iptables -I <chain> -m set --match-set f2b-<name> src -j <blocktype>
+              <iptables> -I <chain> -m set --match-set f2b-<name> src -j <blocktype>
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -m set --match-set f2b-<name> src -j <blocktype>
+actionstop = <iptables> -D <chain> -m set --match-set f2b-<name> src -j <blocktype>
              ipset flush f2b-<name>
              ipset destroy f2b-<name>
 

config/action.d/iptables-ipset-proto6.conf

@@ -24,13 +24,13 @@ before = iptables-common.conf
 # Values:  CMD
 #
 actionstart = ipset create f2b-<name> hash:ip timeout <bantime>
-              iptables -I <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
+              <iptables> -I <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
+actionstop = <iptables> -D <chain> -p <protocol> -m multiport --dports <port> -m set --match-set f2b-<name> src -j <blocktype>
              ipset flush f2b-<name>
              ipset destroy f2b-<name>
 

config/action.d/iptables-multiport-log.conf

@@ -19,28 +19,28 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> 1 -p <protocol> -m multiport --dports <port> -j f2b-<name>
-              iptables -N f2b-<name>-log
-              iptables -I f2b-<name>-log -j LOG --log-prefix "$(expr f2b-<name> : '\(.\{1,23\}\)'):DROP " --log-level warning -m limit --limit 6/m --limit-burst 2
-              iptables -A f2b-<name>-log -j <blocktype>
+actionstart = <iptables> -N f2b-<name>
+              <iptables> -A f2b-<name> -j <returntype>
+              <iptables> -I <chain> 1 -p <protocol> -m multiport --dports <port> -j f2b-<name>
+              <iptables> -N f2b-<name>-log
+              <iptables> -I f2b-<name>-log -j LOG --log-prefix "$(expr f2b-<name> : '\(.\{1,23\}\)'):DROP " --log-level warning -m limit --limit 6/m --limit-burst 2
+              <iptables> -A f2b-<name>-log -j <blocktype>
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -F f2b-<name>-log
-             iptables -X f2b-<name>
-             iptables -X f2b-<name>-log
+actionstop = <iptables> -D <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
+             <iptables> -F f2b-<name>
+             <iptables> -F f2b-<name>-log
+             <iptables> -X f2b-<name>
+             <iptables> -X f2b-<name>-log
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L f2b-<name>-log >/dev/null
+actioncheck = <iptables> -n -L f2b-<name>-log >/dev/null
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -48,7 +48,7 @@ actioncheck = iptables -n -L f2b-<name>-log >/dev/null
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j f2b-<name>-log
+actionban = <iptables> -I f2b-<name> 1 -s <ip> -j f2b-<name>-log
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -56,7 +56,7 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j f2b-<name>-log
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j f2b-<name>-log
+actionunban = <iptables> -D f2b-<name> -s <ip> -j f2b-<name>-log
 
 [Init]
 

config/action.d/iptables-multiport.conf

@@ -14,23 +14,23 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
+actionstart = <iptables> -N f2b-<name>
+              <iptables> -A f2b-<name> -j <returntype>
+              <iptables> -I <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -X f2b-<name>
+actionstop = <iptables> -D <chain> -p <protocol> -m multiport --dports <port> -j f2b-<name>
+             <iptables> -F f2b-<name>
+             <iptables> -X f2b-<name>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -38,7 +38,7 @@ actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -46,7 +46,7 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
 
 [Init]
 

config/action.d/iptables-new.conf

@@ -16,23 +16,23 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
+actionstart = <iptables> -N f2b-<name>
+              <iptables> -A f2b-<name> -j <returntype>
+              <iptables> -I <chain> -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -X f2b-<name>
+actionstop = <iptables> -D <chain> -m state --state NEW -p <protocol> --dport <port> -j f2b-<name>
+             <iptables> -F f2b-<name>
+             <iptables> -X f2b-<name>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -40,7 +40,7 @@ actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -48,7 +48,7 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
 
 [Init]
 

config/action.d/iptables-xt_recent-echo.conf

@@ -32,14 +32,14 @@ before = iptables-common.conf
 #    own rules. The 3600 second timeout is independent and acts as a
 #    safeguard in case the fail2ban process dies unexpectedly. The
 #    shorter of the two timeouts actually matters.
-actionstart = if [ `id -u` -eq 0 ];then iptables -I <chain> -m recent --update --seconds 3600 --name f2b-<name> -j <blocktype>;fi
+actionstart = if [ `id -u` -eq 0 ];then <iptables> -I <chain> -m recent --update --seconds 3600 --name f2b-<name> -j <blocktype>;fi
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
 actionstop = echo / > /proc/net/xt_recent/f2b-<name>
-             if [ `id -u` -eq 0 ];then iptables -D <chain> -m recent --update --seconds 3600 --name f2b-<name> -j <blocktype>;fi
+             if [ `id -u` -eq 0 ];then <iptables> -D <chain> -m recent --update --seconds 3600 --name f2b-<name> -j <blocktype>;fi
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command

config/action.d/iptables.conf

@@ -14,23 +14,23 @@ before = iptables-common.conf
 # Notes.:  command executed once at the start of Fail2Ban.
 # Values:  CMD
 #
-actionstart = iptables -N f2b-<name>
-              iptables -A f2b-<name> -j RETURN
-              iptables -I <chain> -p <protocol> --dport <port> -j f2b-<name>
+actionstart = <iptables> -N f2b-<name>
+              <iptables> -A f2b-<name> -j <returntype>
+              <iptables> -I <chain> -p <protocol> --dport <port> -j f2b-<name>
 
 # Option:  actionstop
 # Notes.:  command executed once at the end of Fail2Ban
 # Values:  CMD
 #
-actionstop = iptables -D <chain> -p <protocol> --dport <port> -j f2b-<name>
-             iptables -F f2b-<name>
-             iptables -X f2b-<name>
+actionstop = <iptables> -D <chain> -p <protocol> --dport <port> -j f2b-<name>
+             <iptables> -F f2b-<name>
+             <iptables> -X f2b-<name>
 
 # Option:  actioncheck
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
+actioncheck = <iptables> -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -38,7 +38,7 @@ actioncheck = iptables -n -L <chain> | grep -q 'f2b-<name>[ \t]'
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
+actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -46,7 +46,7 @@ actionban = iptables -I f2b-<name> 1 -s <ip> -j <blocktype>
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = iptables -D f2b-<name> -s <ip> -j <blocktype>
+actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
 
 [Init]
 

config/action.d/mail-whois-common.conf

@@ -0,0 +1,28 @@
+# Fail2Ban configuration file
+#
+# Common settings for mail actions
+#
+# Users can override the defaults in mail-whois-common.local
+
+[INCLUDES]
+
+# Load customizations if any available
+after = mail-whois-common.local
+
+[DEFAULT]
+#original character set of whois output will be sent to mail program
+_whois = whois <ip> || echo "missing whois program"
+
+# use heuristics to convert charset of whois output to a target
+# character set before sending it to a mail program
+# make sure you have 'file' and 'iconv' commands installed when opting for that
+_whois_target_charset = UTF-8
+_whois_convert_charset = whois <ip> |
+                         { WHOIS_OUTPUT=$(cat) ; WHOIS_CHARSET=$(printf %%b "$WHOIS_OUTPUT" | file -b --mime-encoding -) ; printf %%b "$WHOIS_OUTPUT" | iconv -f $WHOIS_CHARSET -t %(_whois_target_charset)s//TRANSLIT - ; }
+
+# choose between _whois and _whois_convert_charset in mail-whois-common.local
+# or other *.local which include mail-whois-common.conf.
+_whois_command = %(_whois)s
+#_whois_command = %(_whois_convert_charset)s
+
+[Init]

config/action.d/mail-whois-lines.conf

@@ -4,6 +4,10 @@
 # Modified-By: Yaroslav Halchenko to include grepping on IP over log files
 #
 
+[INCLUDES]
+
+before = mail-whois-common.conf
+
 [Definition]
 
 # Option:  actionstart
@@ -39,10 +43,10 @@ actioncheck =
 actionban = printf %%b "Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here is more information about <ip>:\n
-            `whois <ip> || echo missing whois program`\n\n
+            Here is more information about <ip> :\n
+            `%(_whois_command)s`\n\n
             Lines containing IP:<ip> in <logpath>\n
-            `grep '[^0-9]<ip>[^0-9]' <logpath>`\n\n
+            `grep -E <grepopts> '(^|[^0-9])<ip>([^0-9]|$)' <logpath>`\n\n
             Regards,\n
             Fail2Ban"|mail -s "[Fail2Ban] <name>: banned <ip> from  `uname -n`" <dest>
 
@@ -67,3 +71,7 @@ dest = root
 # Path to the log files which contain relevant lines for the abuser IP
 #
 logpath = /dev/null
+
+# Number of log lines to include in the email
+#
+grepopts = -m 1000

config/action.d/mail-whois.conf

@@ -4,6 +4,10 @@
 #
 #
 
+[INCLUDES]
+
+before = mail-whois-common.conf
+
 [Definition]
 
 # Option:  actionstart
@@ -39,8 +43,8 @@ actioncheck =
 actionban = printf %%b "Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here is more information about <ip>:\n
-            `whois <ip> || echo missing whois program`\n
+            Here is more information about <ip> :\n
+            `%(_whois_command)s`\n
             Regards,\n
             Fail2Ban"|mail -s "[Fail2Ban] <name>: banned <ip> from `uname -n`" <dest>
 

config/action.d/mynetwatchman.conf

@@ -111,13 +111,17 @@ myip = `ip -4 addr show dev eth0 | grep inet | head -n 1 | sed -r 's/.*inet ([0-
 #
 protocol = tcp
 
+# Option:  agent
+# Default: Fail2ban
+agent = Fail2ban
+
 # Option:  getcmd
 # Notes.:  A command to fetch a URL. Should output page to STDOUT
 # Values:  CMD  Default: wget
 #
-getcmd = wget --no-verbose --tries=3 --waitretry=10 --connect-timeout=10 --read-timeout=60 --retry-connrefused --output-document=- --user-agent=Fail2Ban
+getcmd = wget --no-verbose --tries=3 --waitretry=10 --connect-timeout=10 --read-timeout=60 --retry-connrefused --output-document=- --user-agent=<agent>
 # Alternative value:
-# getcmd = curl --silent --show-error --retry 3 --connect-timeout 10 --max-time 60 --user-agent Fail2Ban
+# getcmd = curl --silent --show-error --retry 3 --connect-timeout 10 --max-time 60 --user-agent <agent>
 
 # Option:  srcport
 # Notes.:  The source port of the attack. You're unlikely to have this info, so

config/action.d/netscaler.conf

@@ -0,0 +1,33 @@
+# Fail2ban Citrix Netscaler Action
+# by Juliano Jeziorny
+# juliano@jeziorny.eu
+#
+# The script will add offender IPs to a dataset on netscaler, the dataset can then be used to block the IPs at a cs/vserver or global level
+# This dataset is then used to block IPs using responder policies on the netscaler.
+# 
+# The script assumes using HTTPS with unsecure certificate to access the netscaler, 
+# if you have a valid certificate installed remove the -k from the curl lines, or if you want http change it accordingly (and remove the -k)
+# 
+# This action depends on curl
+#
+# You need to populate the 3 options inside Init
+#
+# ns_host: IP or hostname of netslcaer appliance
+# ns_auth: username:password, suggest base64 encoded for a little added security (echo -n "username:password" | base64)
+# ns_dataset:  Name of the netscaler dataset holding the IPs to be blocked.
+# 
+# For further details on how to use it please check http://blog.ckzone.eu/2017/01/fail2ban-action-for-citrix-netscaler.html
+
+[Init]
+ns_host = 
+ns_auth = 
+ns_dataset = 
+
+[Definition]
+actionstart = curl -kH 'Authorization: Basic <ns_auth>' https://<ns_host>/nitro/v1/config
+
+actioncheck = 
+
+actionban = curl -k -H 'Authorization: Basic <ns_auth>' -X PUT -d '{"policydataset_value_binding":{"name":"<ns_dataset>","value":"<ip>"}}' https://<ns_host>/nitro/v1/config/
+
+actionunban = curl -H 'Authorization: Basic <ns_auth>' -X DELETE -k "https://<ns_host>/nitro/v1/config/policydataset_value_binding/<ns_dataset>?args=value:<ip>"

config/action.d/nftables-allports.conf

@@ -0,0 +1,22 @@
+# Fail2Ban configuration file
+#
+# Author: Cyril Jaquier
+# Modified: Yaroslav O. Halchenko <debian@onerussian.com>
+# 			made active on all ports from original iptables.conf
+# Modified: Alexander Belykh <albel727@ngs.ru>
+#                       adapted for nftables
+#
+
+[INCLUDES]
+
+before = nftables-common.conf
+
+[Definition]
+
+# Option:  nftables_mode
+# Notes.:  additional expressions for nftables filter rule
+# Values:  nftables expressions
+#
+nftables_mode = ip protocol <protocol>
+
+[Init]

config/action.d/nftables-common.conf

@@ -0,0 +1,119 @@
+# Fail2Ban configuration file
+#
+# Author: Daniel Black
+# Author: Cyril Jaquier
+# Modified: Yaroslav O. Halchenko <debian@onerussian.com>
+# 			made active on all ports from original iptables.conf
+# Modified: Alexander Belykh <albel727@ngs.ru>
+#                       adapted for nftables
+#
+# This is a included configuration file and includes the definitions for the nftables
+# used in all nftables based actions by default.
+#
+# The user can override the defaults in nftables-common.local
+
+[INCLUDES]
+
+after = nftables-common.local
+
+[Definition]
+
+# Option:  nftables_mode
+# Notes.:  additional expressions for nftables filter rule
+# Values:  nftables expressions
+#
+nftables_mode = <protocol> dport \{ <port> \}
+
+# Option:  actionstart
+# Notes.:  command executed once at the start of Fail2Ban.
+# Values:  CMD
+#
+actionstart = <nftables> add set <nftables_family> <nftables_table> f2b-<name> \{ type <nftables_type>\; \}
+              <nftables> insert rule <nftables_family> <nftables_table> <chain> %(nftables_mode)s ip saddr @f2b-<name> <blocktype>
+
+_nft_list = <nftables> --handle --numeric list chain <nftables_family> <nftables_table> <chain>
+_nft_get_handle_id = grep -m1 'ip saddr @f2b-<name> <blocktype> # handle' | grep -oe ' handle [0-9]*'
+
+# Option:  actionstop
+# Notes.:  command executed once at the end of Fail2Ban
+# Values:  CMD
+#
+actionstop = HANDLE_ID=$(%(_nft_list)s | %(_nft_get_handle_id)s)
+             <nftables> delete rule <nftables_family> <nftables_table> <chain> $HANDLE_ID
+             <nftables> delete set <nftables_family> <nftables_table> f2b-<name>
+
+# Option:  actioncheck
+# Notes.:  command executed once before each actionban command
+# Values:  CMD
+#
+actioncheck = <nftables> list chain <nftables_family> <nftables_table> <chain> | grep -q '@f2b-<name>[ \t]'
+
+# Option:  actionban
+# Notes.:  command executed when banning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionban = <nftables> add element <nftables_family> <nftables_table> f2b-<name> \{ <ip> \}
+
+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionunban = <nftables> delete element <nftables_family> <nftables_table> f2b-<name> \{ <ip> \}
+
+[Init]
+
+# Option:  nftables_type
+# Notes.:  address type to work with
+# Values:  [ipv4_addr | ipv6_addr]  Default: ipv4_addr
+#
+nftables_type = ipv4_addr
+
+# Option:  nftables_family
+# Notes.:  address family to work in
+# Values:  [ip | ip6 | inet]  Default: inet
+#
+nftables_family = inet
+
+# Option:  nftables_table
+# Notes.:  table in the address family to work in
+# Values:  STRING  Default: filter
+#
+nftables_table = filter
+
+# Option:  chain
+# Notes    specifies the nftables chain to which the Fail2Ban rules should be
+#          added
+# Values:  STRING  Default: input
+chain = input
+
+# Default name of the filtering set
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp ] Default: tcp
+#
+protocol = tcp
+
+# Option:  blocktype
+# Note:    This is what the action does with rules. This can be any jump target
+#          as per the nftables man page (section 8). Common values are drop
+#          reject, reject with icmp type host-unreachable
+# Values:  STRING
+blocktype = reject
+
+# Option:  nftables
+# Notes.:  Actual command to be executed, including common to all calls options
+# Values:  STRING
+nftables = nft

config/action.d/nftables-multiport.conf

@@ -0,0 +1,22 @@
+# Fail2Ban configuration file
+#
+# Author: Cyril Jaquier
+# Modified: Yaroslav O. Halchenko <debian@onerussian.com>
+# 			made active on all ports from original iptables.conf
+# Modified: Alexander Belykh <albel727@ngs.ru>
+#                       adapted for nftables
+#
+
+[INCLUDES]
+
+before = nftables-common.conf
+
+[Definition]
+
+# Option:  nftables_mode
+# Notes.:  additional expressions for nftables filter rule
+# Values:  nftables expressions
+#
+nftables_mode = <protocol> dport \{ <port> \}
+
+[Init]

config/action.d/npf.conf

@@ -0,0 +1,61 @@
+# Fail2Ban configuration file
+#
+# NetBSD npf ban/unban
+#
+# Author: Nils Ratusznik <nils@NetBSD.org>
+# Based on pf.conf action file
+#
+
+[Definition]
+
+# Option:  actionstart
+# Notes.:  command executed once at the start of Fail2Ban.
+# Values:  CMD
+#
+# we don't enable NPF automatically, as it will be enabled elsewhere
+actionstart = 
+
+
+# Option:  actionstop
+# Notes.:  command executed once at the end of Fail2Ban
+# Values:  CMD
+#
+# we don't disable NPF automatically either
+actionstop = 
+
+
+# Option:  actioncheck
+# Notes.:  command executed once before each actionban command
+# Values:  CMD
+#
+actioncheck = 
+
+
+# Option:  actionban
+# Notes.:  command executed when banning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
+# Values:  CMD
+#
+actionban = /sbin/npfctl table <tablename> add <ip>
+
+
+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    <ip>  IP address
+#          <failures>  number of failures
+#          <time>  unix timestamp of the ban time
+# Values:  CMD
+#
+# note -r option used to remove matching rule
+actionunban = /sbin/npfctl table <tablename> rem <ip>
+
+[Init]
+# Option:  tablename
+# Notes.:  The pf table name.
+# Values:  [ STRING ]
+#
+tablename = fail2ban

config/action.d/nsupdate.conf

@@ -0,0 +1,114 @@
+# Fail2Ban configuration file
+#
+# Author: Andrew St. Jean
+#
+# Use nsupdate to perform dynamic DNS updates on a BIND zone file.
+# One may want to do this to update a local RBL with banned IP addresses.
+#
+# Options
+#
+# domain	DNS domain that will appear in nsupdate add and delete
+#		commands.
+#
+# ttl		The time to live (TTL) in seconds of the TXT resource
+#		record.
+#
+# rdata		Data portion of the TXT resource record.
+#
+# nsupdatecmd	Full path to the nsupdate command.
+#
+# keyfile	Full path to TSIG key file used for authentication between
+#		nsupdate and BIND.
+#
+# Create an nsupdate.local to set at least the <domain> and <keyfile>
+# options as they don't have default values.
+#
+# The ban and unban commands assume nsupdate will authenticate to the BIND
+# server using a TSIG key. The full path to the key file must be specified
+# in the <keyfile> parameter. Use this command to generate your TSIG key.
+#
+# dnssec-keygen -a HMAC-MD5 -b 256 -n HOST <key_name>
+#
+# Replace <key_name> with some meaningful name.
+#
+# This command will generate two files. Specify the .private file in the
+# <keyfile> option. Note that the .key file must also be present in the same
+# directory for nsupdate to use the key.
+#
+# Don't forget to add the key and appropriate allow-update or update-policy
+# option to your named.conf file.
+#
+
+[Definition]
+
+# Option:  actionstart
+# Notes.:  command executed once at the start of Fail2Ban.
+# Values:  CMD
+#
+actionstart =
+
+
+# Option:  actionstop
+# Notes.:  command executed once at the end of Fail2Ban
+# Values:  CMD
+#
+actionstop =
+
+
+# Option:  actioncheck
+# Notes.:  command executed once before each actionban command
+# Values:  CMD
+#
+actioncheck =
+
+# Option:  actionban
+# Notes.:  command executed when banning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionban = echo <ip> | awk -F. '{print "prereq nxrrset "$4"."$3"."$2"."$1".<domain> TXT"; print "update add "$4"."$3"."$2"."$1".<domain> <ttl> IN TXT \"<rdata>\""; print "send"}' | <nsupdatecmd> -k <keyfile>
+
+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionunban = echo <ip> | awk -F. '{print "update delete "$4"."$3"."$2"."$1".<domain>"; print "send"}' | <nsupdatecmd> -k <keyfile>
+
+[Init]
+
+# Option:  domain
+# Notes.:  DNS domain that nsupdate will update.
+# Values:  STRING
+#
+domain = 
+
+# Option:  ttl
+# Notes.:  time to live (TTL) in seconds of TXT resource record
+#          added by nsupdate.
+# Values:  NUM
+#
+ttl = 60
+
+# Option:  rdata
+# Notes.:  data portion of the TXT resource record added by nsupdate.
+# Values:  STRING
+#
+rdata = Your IP has been banned
+
+# Option:  nsupdatecmd
+# Notes.:  specifies the full path to the nsupdate program that dynamically
+#          updates BIND zone files.
+# Values:  CMD
+#
+nsupdatecmd = /usr/bin/nsupdate
+
+# Option:  keyfile
+# Notes.:  specifies the full path to the file containing the
+#	   TSIG key for communicating with BIND.
+# Values:  STRING
+#
+keyfile = 
+

config/action.d/route.conf

@@ -17,6 +17,9 @@
 [Definition]
 actionban   = ip route add <blocktype> <ip>
 actionunban = ip route del <blocktype> <ip>
+actioncheck =
+actionstart =
+actionstop =
 
 [Init]
 

config/action.d/sendmail-common.conf

@@ -15,7 +15,7 @@ after = sendmail-common.local
 # Values:  CMD
 #
 actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on `uname -n`
-              Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+              Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
               From: <sendername> <<sender>>
               To: <dest>\n
               Hi,\n
@@ -28,7 +28,7 @@ actionstart = printf %%b "Subject: [Fail2Ban] <name>: started on `uname -n`
 # Values:  CMD
 #
 actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped on `uname -n`
-             Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+             Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
              From: <sendername> <<sender>>
              To: <dest>\n
              Hi,\n
@@ -40,7 +40,7 @@ actionstop = printf %%b "Subject: [Fail2Ban] <name>: stopped on `uname -n`
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = 
+actioncheck =
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP. Take care that the
@@ -48,7 +48,7 @@ actioncheck =
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionban = 
+actionban =
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP. Take care that the
@@ -56,7 +56,7 @@ actionban =
 # Tags:    See jail.conf(5) man page
 # Values:  CMD
 #
-actionunban = 
+actionunban =
 
 [Init]
 

config/action.d/sendmail-geoip-lines.conf

@@ -0,0 +1,53 @@
+# Fail2Ban configuration file
+#
+# Author: Viktor Szépe
+#
+#
+
+[INCLUDES]
+
+before = sendmail-common.conf
+
+[Definition]
+
+# Option:  actionban
+# Notes.:  Command executed when banning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+#          You need to install geoiplookup and the GeoLite or GeoIP databases.
+#          (geoip-bin and geoip-database in Debian)
+#          The host command comes from bind9-host package.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
+            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
+            From: <sendername> <<sender>>
+            To: <dest>\n
+            Hi,\n
+            The IP <ip> has just been banned by Fail2Ban after
+            <failures> attempts against <name>.\n\n
+            Here is more information about <ip> :\n
+            http://bgp.he.net/ip/<ip>
+            http://www.projecthoneypot.org/ip_<ip>
+            http://whois.domaintools.com/<ip>\n\n
+            Country:`geoiplookup -f /usr/share/GeoIP/GeoIP.dat "<ip>" | cut -d':' -f2-`
+            AS:`geoiplookup -f /usr/share/GeoIP/GeoIPASNum.dat "<ip>" | cut -d':' -f2-`
+            hostname: `host -t A <ip> 2>&1`\n\n
+            Lines containing IP:<ip> in <logpath>\n
+            `grep -E <grepopts> '(^|[^0-9])<ip>([^0-9]|$)' <logpath>`\n\n
+            Regards,\n
+            Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
+
+[Init]
+
+# Default name of the chain
+#
+name = default
+
+# Path to the log files which contain relevant lines for the abuser IP
+#
+logpath = /dev/null
+
+# Number of log lines to include in the email
+#
+grepopts = -m 1000

config/action.d/sendmail-whois-ipjailmatches.conf

@@ -17,13 +17,13 @@ before = sendmail-common.conf
 # Values:  CMD
 #
 actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
             From: <sendername> <<sender>>
             To: <dest>\n
             Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here are more information about <ip>:\n
+            Here is more information about <ip> :\n
             `/usr/bin/whois <ip>`\n\n
             Matches for <name> with <ipjailfailures> failures IP:<ip>\n
             <ipjailmatches>\n\n

config/action.d/sendmail-whois-ipmatches.conf

@@ -17,13 +17,13 @@ before = sendmail-common.conf
 # Values:  CMD
 #
 actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
             From: <sendername> <<sender>>
             To: <dest>\n
             Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here are more information about <ip>:\n
+            Here is more information about <ip> :\n
             `/usr/bin/whois <ip>`\n\n
             Matches with <ipfailures> failures IP:<ip>\n
             <ipmatches>\n\n

config/action.d/sendmail-whois-lines.conf

@@ -17,16 +17,16 @@ before = sendmail-common.conf
 # Values:  CMD
 #
 actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
             From: <sendername> <<sender>>
             To: <dest>\n
             Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here is more information about <ip>:\n
+            Here is more information about <ip> :\n
             `/usr/bin/whois <ip> || echo missing whois program`\n\n
             Lines containing IP:<ip> in <logpath>\n
-            `grep '[^0-9]<ip>[^0-9]' <logpath>`\n\n
+            `grep -E <grepopts> '(^|[^0-9])<ip>([^0-9]|$)' <logpath>`\n\n
             Regards,\n
             Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>
 
@@ -40,3 +40,6 @@ name = default
 #
 logpath = /dev/null
 
+# Number of log lines to include in the email
+#
+grepopts = -m 1000

config/action.d/sendmail-whois-matches.conf

@@ -17,13 +17,13 @@ before = sendmail-common.conf
 # Values:  CMD
 #
 actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
             From: <sendername> <<sender>>
             To: <dest>\n
             Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here are more information about <ip>:\n
+            Here is more information about <ip> :\n
             `/usr/bin/whois <ip>`\n\n
             Matches:\n
             <matches>\n\n

config/action.d/sendmail-whois.conf

@@ -17,13 +17,13 @@ before = sendmail-common.conf
 # Values:  CMD
 #
 actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
             From: <sendername> <<sender>>
             To: <dest>\n
             Hi,\n
             The IP <ip> has just been banned by Fail2Ban after
             <failures> attempts against <name>.\n\n
-            Here is more information about <ip>:\n
+            Here is more information about <ip> :\n
             `/usr/bin/whois <ip> || echo missing whois program`\n
             Regards,\n
             Fail2Ban" | /usr/sbin/sendmail -f <sender> <dest>

config/action.d/sendmail.conf

@@ -17,7 +17,7 @@ before = sendmail-common.conf
 # Values:  CMD
 #
 actionban = printf %%b "Subject: [Fail2Ban] <name>: banned <ip> from `uname -n`
-            Date: `LC_TIME=C date -u +"%%a, %%d %%h %%Y %%T +0000"`
+            Date: `LC_ALL=C date +"%%a, %%d %%h %%Y %%T %%z"`
             From: <sendername> <<sender>>
             To: <dest>\n
             Hi,\n

config/action.d/shorewall-ipset-proto6.conf

@@ -0,0 +1,85 @@
+# Fail2Ban configuration file
+#
+# Author: Eduardo Diaz
+#
+# This is for ipset protocol 6 (and hopefully later) (ipset v6.14).
+# for shorewall
+#
+# Use this setting in jail.conf to modify use this action instead of a
+# default one
+#
+# banaction   = shorewall-ipset-proto6
+#
+# This requires the program ipset which is normally in package called ipset.
+#
+# IPset was a feature introduced in the linux kernel 2.6.39 and 3.0.0
+# kernels, and you need Shorewall >= 4.5.5 to use this action.
+#
+# The default Shorewall configuration is with "BLACKLISTNEWONLY=Yes" (see
+# file /etc/shorewall/shorewall.conf). This means that when Fail2ban adds a
+# new shorewall rule to ban an IP address, that rule will affect only new
+# connections. So if the attacker goes on trying using the same connection
+# he could even log in. In order to get the same behavior of the iptable
+# action (so that the ban is immediate) the /etc/shorewall/shorewall.conf
+# file should me modified with "BLACKLISTNEWONLY=No".
+#
+#
+# Enable shorewall to use a blacklist using iptables creating a file
+# /etc/shorewall/blrules and adding "DROP net:+f2b-ssh all" and
+# similar lines for every jail.  To enable restoring you ipset you
+# must set SAVE_IPSETS=Yes in shorewall.conf .  You can read more
+# about ipsets handling in Shorewall at http://shorewall.net/ipsets.html
+#
+# To force creation of the ipset in the case that somebody deletes the
+# ipset create a file /etc/shorewall/initdone and add one line for
+# every ipset (this files are in Perl) and add 1 at the end of the file.
+# The example:
+# system("/usr/sbin/ipset -quiet -exist create f2b-ssh hash:ip timeout 600 ");
+# 1;
+#
+# To destroy the ipset in shorewall you must add to the file /etc/shorewall/stopped
+# # One line of every ipset
+# system("/usr/sbin/ipset -quiet destroy f2b-ssh ");
+# 1; # This must go to the end of the file if not shorewall compilation fails
+#
+
+
+[Definition]
+
+# Option:  actionstart
+# Notes.:  command executed once at the start of Fail2Ban.
+# Values:  CMD
+#
+actionstart = if ! ipset -quiet -name list f2b-<name> >/dev/null;
+              then ipset -quiet -exist create f2b-<name> hash:ip timeout <bantime>;
+              fi
+
+# Option:  actionstop
+# Notes.:  command executed once at the end of Fail2Ban
+# Values:  CMD
+#
+actionstop = ipset flush f2b-<name>
+
+# Option:  actionban
+# Notes.:  command executed when banning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionban = ipset add f2b-<name> <ip> timeout <bantime> -exist
+
+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionunban = ipset del f2b-<name> <ip> -exist
+
+[Init]
+
+# Option: bantime
+# Notes:  specifies the bantime in seconds (handled internally rather than by fail2ban)
+# Values:  [ NUM ]  Default: 600
+#
+bantime = 600

config/action.d/smtp.py

@@ -68,6 +68,7 @@ Matches for %(ip)s for jail %(jailname)s:
 %(ipjailmatches)s
 """
 
+
 class SMTPAction(ActionBase):
 	"""Fail2Ban action which sends emails to inform on jail starting,
 	stopping and bans.

config/action.d/symbiosis-blacklist-allports.conf

@@ -3,6 +3,9 @@
 # Author: Yaroslav Halchenko
 #
 
+[INCLUDES]
+
+before = iptables-common.conf
 
 [Definition]
 
@@ -22,21 +25,21 @@ actionstop =
 # Notes.:  command executed once before each actionban command
 # Values:  CMD
 #
-actioncheck = iptables -n -L <chain>
+actioncheck = <iptables> -n -L <chain>
 
 # Option:  actionban
 # Notes.:  command executed when banning an IP.
 # Values:  CMD
 #
 actionban = echo 'all' >| /etc/symbiosis/firewall/blacklist.d/<ip>.auto
-            iptables -I <chain> 1 -s <ip> -j <blocktype>
+            <iptables> -I <chain> 1 -s <ip> -j <blocktype>
 
 # Option:  actionunban
 # Notes.:  command executed when unbanning an IP.
 # Values:  CMD
 #
 actionunban = rm -f /etc/symbiosis/firewall/blacklist.d/<ip>.auto
-              iptables -D <chain> -s <ip> -j <blocktype> || :
+              <iptables> -D <chain> -s <ip> -j <blocktype> || :
 
 [Init]
 

config/action.d/ufw.conf

@@ -13,9 +13,11 @@ actionstop =
 
 actioncheck = 
 
-actionban = [ -n "<application>" ] && app="app <application>" ; ufw insert <insertpos> <blocktype> from <ip> to <destination> $app
+actionban = [ -n "<application>" ] && app="app <application>"
+            ufw insert <insertpos> <blocktype> from <ip> to <destination> $app
 
-actionunban = [ -n "<application>" ] && app="app <application>" ; ufw delete <blocktype> from <ip> to <destination> $app
+actionunban = [ -n "<application>" ] && app="app <application>"
+              ufw delete <blocktype> from <ip> to <destination> $app
 
 [Init]
 # Option: insertpos

config/action.d/xarf-login-attack.conf

@@ -1,7 +1,7 @@
 # Fail2Ban action for sending xarf Login-Attack messages to IP owner
 #
-# IMPORTANT: 
-# 
+# IMPORTANT:
+#
 # Emailing a IP owner of abuse is a serious complain. Make sure that it is
 # serious. Fail2ban developers and network owners recommend you only use this
 # action for:
@@ -46,7 +46,7 @@ actionban = oifs=${IFS}; IFS=.;SEP_IP=( <ip> ); set -- ${SEP_IP}; ADDRESSES=$(di
             REPORTID=<time>@`uname -n`
             TLP=<tlp>
             PORT=<port>
-            DATE=`LC_TIME=C date -u --date=@<time> +"%%a, %%d %%h %%Y %%T +0000"`
+            DATE=`LC_ALL=C date --date=@<time> +"%%a, %%d %%h %%Y %%T %%z"`
             if [ ! -z "$ADDRESSES" ]; then
                 (printf -- %%b "<header>\n<message>\n<report>\n";
                  date '+Note: Local timezone is %%z (%%Z)';
@@ -70,7 +70,7 @@ footer = \n\n--Abuse-bfbb0f920793ac03cb8634bde14d8a1e--
 report =  --Abuse-bfbb0f920793ac03cb8634bde14d8a1e\nMIME-Version: 1.0\nContent-Transfer-Encoding: 7bit\nContent-Type: text/plain; charset=utf-8; name=\"report.txt\";\n\n---\nReported-From: $FROM\nCategory: abuse\nReport-ID: $REPORTID\nReport-Type: login-attack\nService: $SERVICE\nVersion: 0.2\nUser-Agent: Fail2ban v0.9\nDate: $DATE\nSource-Type: ip-address\nSource: $IP\nPort: $PORT\nSchema-URL: http://www.x-arf.org/schema/abuse_login-attack_0.1.2.json\nAttachment: text/plain\nOccurances: $FAILURES\nTLP: $TLP\n\n\n--Abuse-bfbb0f920793ac03cb8634bde14d8a1e\nMIME-Version: 1.0\nContent-Transfer-Encoding: 7bit\nContent-Type: text/plain; charset=utf8; name=\"logfile.log\";
 
 # Option: Message
-# Notes:  This can be modified by the users 
+# Notes:  This can be modified by the users
 message = Dear Sir/Madam,\n\nWe have detected abuse from the IP address $IP, which according to abusix.com is on your network. We would appreciate if you would investigate and take action as appropriate.\n\nLog lines are given below, but please ask if you require any further information.\n\n(If you are not the correct person to contact about this please accept our apologies - your e-mail address was extracted from the whois record by an automated process.)\n\n This mail was generated by Fail2Ban in a X-ARF format! You can find more information about x-arf at http://www.x-arf.org/specification.html.\n\nThe recipient address of this report was provided by the Abuse Contact DB by abusix.com. abusix.com does not maintain the content of the database. All information which we pass out, derives from the RIR databases and is processed for ease of use. If you want to change or report non working abuse contacts please contact the appropriate RIR. If you have any further question, contact abusix.com directly via email (info@abusix.com). Information about the Abuse Contact Database can be found here: https://abusix.com/global-reporting/abuse-contact-db\nabusix.com is neither responsible nor liable for the content or accuracy of this message.\n
 
 # Option:  loglines
@@ -97,7 +97,7 @@ mailargs = -f <sender>
 # Option:  tlp
 # Notes.:  Traffic light protocol defining the sharing of this information.
 #          http://www.trusted-introducer.org/ISTLPv11.pdf
-#          green is share to those involved in network security but it is not 
+#          green is share to those involved in network security but it is not
 #          to be released to the public.
 tlp = green
 

config/fail2ban.conf

@@ -34,6 +34,12 @@ loglevel = INFO
 #
 logtarget = /var/log/fail2ban.log
 
+# Option: syslogsocket
+# Notes: Set the syslog socket file. Only used when logtarget is SYSLOG
+#        auto uses platform.system() to determine predefined paths
+# Values: [ auto | FILE ]  Default: auto
+syslogsocket = auto
+
 # Option: socket
 # Notes.: Set the socket file. This is used to communicate with the daemon. Do
 #         not remove this file when Fail2ban runs. It will not be possible to

config/filter.d/apache-auth.conf

@@ -10,7 +10,7 @@ before = apache-common.conf
 [Definition]
 
 
-failregex = ^%(_apache_error_client)s (AH01797: )?client denied by server configuration: (uri )?\S*(, referer: \S+)?\s*$
+failregex = ^%(_apache_error_client)s (AH(01797|01630): )?client denied by server configuration: (uri )?\S*(, referer: \S+)?\s*$
             ^%(_apache_error_client)s (AH01617: )?user .*? authentication failure for "\S*": Password Mismatch(, referer: \S+)?$
             ^%(_apache_error_client)s (AH01618: )?user .*? not found(: )?\S*(, referer: \S+)?\s*$
             ^%(_apache_error_client)s (AH01614: )?client used wrong authentication scheme: \S*(, referer: \S+)?\s*$

config/filter.d/apache-badbots.conf

@@ -8,9 +8,9 @@
 [Definition]
 
 badbotscustom = EmailCollector|WebEMailExtrac|TrackBack/1\.02|sogou music spider
-badbots = Atomic_Email_Hunter/4\.0|atSpider/1\.0|autoemailspider|bwh3_user_agent|China Local Browse 2\.6|ContactBot/0\.2|ContentSmartz|DataCha0s/2\.0|DBrowse 1\.4b|DBrowse 1\.4d|Demo Bot DOT 16b|Demo Bot Z 16b|DSurf15a 01|DSurf15a 71|DSurf15a 81|DSurf15a VA|EBrowse 1\.4b|Educate Search VxB|EmailSiphon|EmailSpider|EmailWolf 1\.00|ESurf15a 15|ExtractorPro|Franklin Locator 1\.8|FSurf15a 01|Full Web Bot 0416B|Full Web Bot 0516B|Full Web Bot 2816B|Guestbook Auto Submitter|Industry Program 1\.0\.x|ISC Systems iRc Search 2\.1|IUPUI Research Bot v 1\.9a|LARBIN-EXPERIMENTAL \(efp@gmx\.net\)|LetsCrawl\.com/1\.0 +http\://letscrawl\.com/|Lincoln State Web Browser|LMQueueBot/0\.2|LWP\:\:Simple/5\.803|Mac Finder 1\.0\.xx|MFC Foundation Class Library 4\.0|Microsoft URL Control - 6\.00\.8xxx|Missauga Locate 1\.0\.0|Missigua Locator 1\.9|Missouri College Browse|Mizzu Labs 2\.2|Mo College 1\.9|MVAClient|Mozilla/2\.0 \(compatible; NEWT ActiveX; Win32\)|Mozilla/3\.0 \(compatible; Indy Library\)|Mozilla/3\.0 \(compatible; scan4mail \(advanced version\) http\://www\.peterspages\.net/?scan4mail\)|Mozilla/4\.0 \(compatible; Advanced Email Extractor v2\.xx\)|Mozilla/4\.0 \(compatible; Iplexx Spider/1\.0 http\://www\.iplexx\.at\)|Mozilla/4\.0 \(compatible; MSIE 5\.0; Windows NT; DigExt; DTS Agent|Mozilla/4\.0 efp@gmx\.net|Mozilla/5\.0 \(Version\: xxxx Type\:xx\)|NameOfAgent \(CMS Spider\)|NASA Search 1\.0|Nsauditor/1\.x|PBrowse 1\.4b|PEval 1\.4b|Poirot|Port Huron Labs|Production Bot 0116B|Production Bot 2016B|Production Bot DOT 3016B|Program Shareware 1\.0\.2|PSurf15a 11|PSurf15a 51|PSurf15a VA|psycheclone|RSurf15a 41|RSurf15a 51|RSurf15a 81|searchbot admin@google\.com|ShablastBot 1\.0|snap\.com beta crawler v0|Snapbot/1\.0|Snapbot/1\.0 \(Snap Shots, +http\://www\.snap\.com\)|sogou develop spider|Sogou Orion spider/3\.0\(+http\://www\.sogou\.com/docs/help/webmasters\.htm#07\)|sogou spider|Sogou web spider/3\.0\(+http\://www\.sogou\.com/docs/help/webmasters\.htm#07\)|sohu agent|SSurf15a 11 |TSurf15a 11|Under the Rainbow 2\.2|User-Agent\: Mozilla/4\.0 \(compatible; MSIE 6\.0; Windows NT 5\.1\)|VadixBot|WebVulnCrawl\.unknown/1\.0 libwww-perl/5\.803|Wells Search II|WEP Search 00
+badbots = Atomic_Email_Hunter/4\.0|atSpider/1\.0|autoemailspider|bwh3_user_agent|China Local Browse 2\.6|ContactBot/0\.2|ContentSmartz|DataCha0s/2\.0|DBrowse 1\.4b|DBrowse 1\.4d|Demo Bot DOT 16b|Demo Bot Z 16b|DSurf15a 01|DSurf15a 71|DSurf15a 81|DSurf15a VA|EBrowse 1\.4b|Educate Search VxB|EmailSiphon|EmailSpider|EmailWolf 1\.00|ESurf15a 15|ExtractorPro|Franklin Locator 1\.8|FSurf15a 01|Full Web Bot 0416B|Full Web Bot 0516B|Full Web Bot 2816B|Guestbook Auto Submitter|Industry Program 1\.0\.x|ISC Systems iRc Search 2\.1|IUPUI Research Bot v 1\.9a|LARBIN-EXPERIMENTAL \(efp@gmx\.net\)|LetsCrawl\.com/1\.0 \+http\://letscrawl\.com/|Lincoln State Web Browser|LMQueueBot/0\.2|LWP\:\:Simple/5\.803|Mac Finder 1\.0\.xx|MFC Foundation Class Library 4\.0|Microsoft URL Control - 6\.00\.8xxx|Missauga Locate 1\.0\.0|Missigua Locator 1\.9|Missouri College Browse|Mizzu Labs 2\.2|Mo College 1\.9|MVAClient|Mozilla/2\.0 \(compatible; NEWT ActiveX; Win32\)|Mozilla/3\.0 \(compatible; Indy Library\)|Mozilla/3\.0 \(compatible; scan4mail \(advanced version\) http\://www\.peterspages\.net/?scan4mail\)|Mozilla/4\.0 \(compatible; Advanced Email Extractor v2\.xx\)|Mozilla/4\.0 \(compatible; Iplexx Spider/1\.0 http\://www\.iplexx\.at\)|Mozilla/4\.0 \(compatible; MSIE 5\.0; Windows NT; DigExt; DTS Agent|Mozilla/4\.0 efp@gmx\.net|Mozilla/5\.0 \(Version\: xxxx Type\:xx\)|NameOfAgent \(CMS Spider\)|NASA Search 1\.0|Nsauditor/1\.x|PBrowse 1\.4b|PEval 1\.4b|Poirot|Port Huron Labs|Production Bot 0116B|Production Bot 2016B|Production Bot DOT 3016B|Program Shareware 1\.0\.2|PSurf15a 11|PSurf15a 51|PSurf15a VA|psycheclone|RSurf15a 41|RSurf15a 51|RSurf15a 81|searchbot admin@google\.com|ShablastBot 1\.0|snap\.com beta crawler v0|Snapbot/1\.0|Snapbot/1\.0 \(Snap Shots, \+http\://www\.snap\.com\)|sogou develop spider|Sogou Orion spider/3\.0\(\+http\://www\.sogou\.com/docs/help/webmasters\.htm#07\)|sogou spider|Sogou web spider/3\.0\(\+http\://www\.sogou\.com/docs/help/webmasters\.htm#07\)|sohu agent|SSurf15a 11 |TSurf15a 11|Under the Rainbow 2\.2|User-Agent\: Mozilla/4\.0 \(compatible; MSIE 6\.0; Windows NT 5\.1\)|VadixBot|WebVulnCrawl\.unknown/1\.0 libwww-perl/5\.803|Wells Search II|WEP Search 00
 
-failregex = ^<HOST> -.*"(GET|POST).*HTTP.*"(?:%(badbots)s|%(badbotscustom)s)"$
+failregex = ^<HOST> -.*"(GET|POST|HEAD).*HTTP.*"(?:%(badbots)s|%(badbotscustom)s)"$
 
 ignoreregex =
 

config/filter.d/apache-botsearch.conf

@@ -17,7 +17,9 @@
 [INCLUDES]
 
 # overwrite with apache-common.local if _apache_error_client is incorrect.
+# Load regexes for filtering from botsearch-common.conf
 before = apache-common.conf
+         botsearch-common.conf
 
 [Definition]
 
@@ -31,18 +33,8 @@ ignoreregex =
 
 # Webroot represents the webroot on which all other files are based
 webroot = /var/www/
-# Block is the actual non-found directories to block
-block = (<webmail>|<phpmyadmin>|<wordpress>)[^,]*
-
-# These are just convient definitions that assist the blocking of stuff that 
-# isn't installed
-webmail = roundcube|(ext)?mail|horde|(v-?)?webmail
-
-phpmyadmin = (typo3/|xampp/|admin/|)(pma|(php)?[Mm]y[Aa]dmin)
-
-wordpress = wp-(login|signup)\.php
 
 
 # DEV Notes:
 #
-# Author: Daniel Black
+# Author: Daniel Black

config/filter.d/apache-fakegooglebot.conf

@@ -0,0 +1,14 @@
+# Fail2Ban filter for fake Googlebot User Agents
+
+[Definition]
+
+failregex = ^<HOST> .*Googlebot.*$
+
+ignoreregex =
+
+
+# DEV Notes:
+#
+# Author: Lee Clemens
+# Thanks: Johannes B. Ullrich, Ph.D.
+# Reference: https://isc.sans.edu/forums/diary/When+Google+isnt+Google/15968/

config/filter.d/apache-modsecurity.conf

@@ -10,9 +10,10 @@ before = apache-common.conf
 [Definition]
 
 
-failregex = ^%(_apache_error_client)s ModSecurity:  (\[.*?\] )*Access denied with code [45]\d\d.*$
+failregex = ^%(_apache_error_client)s ModSecurity:\s+(?:\[(?:\w+ \"[^\"]*\"|[^\]]*)\]\s*)*Access denied with code [45]\d\d
 
 ignoreregex = 
 
 # https://github.com/SpiderLabs/ModSecurity/wiki/ModSecurity-2-Data-Formats
 # Author: Daniel Black
+#         Sergey G. Brester aka sebres (review, optimization)

config/filter.d/apache-pass.conf

@@ -0,0 +1,20 @@
+# Fail2Ban Apache pass filter
+# This filter is for access.log, NOT for error.log
+#
+# The knocking request must have a referer.
+
+[INCLUDES]
+
+before = apache-common.conf
+
+[Definition]
+
+failregex = ^<HOST> - \w+ \[\] "GET <knocking_url> HTTP/1\.[01]" 200 \d+ ".*" "[^-].*"$
+
+ignoreregex =
+
+[Init]
+
+knocking_url = /knocking/
+
+# Author: Viktor Szépe

config/filter.d/apache-shellshock.conf

@@ -0,0 +1,26 @@
+# Fail2Ban filter to block web requests containing custom headers attempting to exploit the shellshock bug
+#
+#
+
+[INCLUDES]
+
+# overwrite with apache-common.local if _apache_error_client is incorrect.
+before = apache-common.conf
+
+[Definition]
+
+failregex = ^%(_apache_error_client)s (AH01215: )?/bin/(ba)?sh: warning: HTTP_.*?: ignoring function definition attempt(, referer: \S+)?\s*$
+            ^%(_apache_error_client)s (AH01215: )?/bin/(ba)?sh: error importing function definition for `HTTP_.*?'(, referer: \S+)?\s*$
+
+ignoreregex = 
+
+
+# DEV Notes:
+#
+# https://wiki.apache.org/httpd/ListOfErrors for apache error IDs
+#
+# example log lines: 
+# [Thu Sep 25 09:27:18.813902 2014] [cgi:error] [pid 16860] [client 89.207.132.76:59635] AH01215: /bin/bash: warning: HTTP_TEST: ignoring function definition attempt
+# [Thu Sep 25 09:29:56.141832 2014] [cgi:error] [pid 16864] [client 162.247.73.206:41273] AH01215: /bin/bash: error importing function definition for `HTTP_TEST'
+#
+# Author: Eugene Hopkinson (riot@riot.so)

config/filter.d/assp.conf

@@ -1,24 +1,43 @@
-# Fail2Ban filter for Anti-Spam SMTP Proxy Server also known as ASSP
-# 
-#    Honmepage:   http://www.magicvillage.de/~Fritz_Borgstedt/assp/0003D91C-8000001C/
-#    ProjektSite: http://sourceforge.net/projects/assp/?source=directory
+# Fail2Ban filter for Anti-Spam SMTP Proxy Server (ASSP)
+#    Filter works in theory for both ASSP V1 and V2. Recommended ASSP is V2.5.1 or later.
+#    Support for ASSP V1 ended in 2014 so if you are still running ASSP V1 an immediate upgrade is recommended.
+#
+#    Homepage:    http://sourceforge.net/projects/assp/
+#    ProjectSite: http://sourceforge.net/projects/assp/?source=directory
 #
 #
 
 [Definition] 
+# Note: First three failregex matches below are for ASSP V1 with the remaining being designed for V2. Deleting the V1 regex is recommended but I left it in for compatibility reasons.
 
 __assp_actions = (?:dropping|refusing)
 
 failregex = ^(:? \[SSL-out\])? <HOST> max sender authentication errors \(\d{,3}\) exceeded -- %(__assp_actions)s connection - after reply: \d{3} \d{1}\.\d{1}.\d{1} Error: authentication failed: \w+;$
 			^(?: \[SSL-out\])? <HOST> SSL negotiation with client failed: SSL accept attempt failed with unknown error.*:unknown protocol;$
 			^ Blocking <HOST> - too much AUTH errors \(\d{,3}\);$
+			^\s*(?:[\w\-]+\s+)*(?:\[\S+\]\s+)*<HOST> (?:\<\S+@\S+\.\S+\> )*(?:to: \S+@\S+\.\S+ )*relay attempt blocked for(?: \(parsing\))?: \S+$
+			^\s*(?:[\w\-]+\s+)*(?:\[\S+\]\s+)*<HOST> \[SMTP Error\] 535 5\.7\.8 Error: authentication failed:\s+(?:\S+|Connection lost to authentication server|Invalid authentication mechanism|Invalid base64 data in continued response)?$
 
 ignoreregex = 
 
 # DEV Notes:
+# V1 Examples matches:
+#   Apr-27-13 02:33:09 Blocking 217.194.197.97 - too much AUTH errors (41);
+#   Dec-29-12 17:10:31 [SSL-out] 200.247.87.82 SSL negotiation with client failed: SSL accept attempt failed with unknown errorerror:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol;
+#   Dec-30-12 04:01:47 [SSL-out] 81.82.232.66 max sender authentication errors (5) exceeded 
 #
-# Examples: Apr-27-13 02:33:09 Blocking 217.194.197.97 - too much AUTH errors (41);
-#           Dec-29-12 17:10:31 [SSL-out] 200.247.87.82 SSL negotiation with client failed: SSL accept attempt failed with unknown errorerror:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol;
-#           Dec-30-12 04:01:47 [SSL-out] 81.82.232.66 max sender authentication errors (5) exceeded 
+# V2 Examples matches:
+#   Jul-29-16 16:49:52 m1-25391-06124 [Worker_1] [TLS-out] [RelayAttempt] 0.0.0.0 <user@example.com> to: user@example.org relay attempt blocked for: someone@example.org
+#   Jul-30-16 16:59:42 [Worker_1] [TLS-out] 0.0.0.0 [SMTP Error] 535 5.7.8 Error: authentication failed: UGFzc3dvcmQ6
+#   Jul-30-16 00:15:36 m1-52131-09651 [Worker_1] [TLS-out] 0.0.0.0 [SMTP Error] 535 5.7.8 Error: authentication failed: UGFzc3dvcmQ6
+#   Jul-31-16 06:45:59 [Worker_1] [TLS-in] [TLS-out] 0.0.0.0 [SMTP Error] 535 5.7.8 Error: authentication failed:
+#   Jan-05-16 08:38:49 m1-01129-09140 [Worker_1] [TLS-in] [TLS-out] [RelayAttempt] 0.0.0.0 <user@example.com> relay attempt blocked for (parsing): <user2@example>
+#   Jun-12-16 16:43:37 m1-64217-12013 [Worker_1] [TLS-in] [TLS-out] [RelayAttempt] 0.0.0.0 <user@example.com> to: user2@example.com relay attempt blocked for (parsing): <a.notheruser69@example.c>
+#   Jan-22-16 22:25:51 [Worker_1] [TLS-out] 0.0.0.0 [SMTP Error] 535 5.7.8 Error: authentication failed: Invalid authentication mechanism
+#   Mar-19-16 13:42:20 [Worker_1] [TLS-out] 0.0.0.0 [SMTP Error] 535 5.7.8 Error: authentication failed: Invalid base64 data in continued response
+#   Jul-18-16 16:54:21 [Worker_2] [TLS-out] 0.0.0.0 [SMTP Error] 535 5.7.8 Error: authentication failed: Connection lost to authentication server
+#   Jul-18-16 17:14:23 m1-76453-02949 [Worker_1] [TLS-out] 0.0.0.0 [SMTP Error] 535 5.7.8 Error: authentication failed: Connection lost to authentication server
+
 #
 # Author: Enrico Labedzki (enrico.labedzki@deiwos.de)
+# V2 Filters: Robert Hardy (rhardy@webcon.ca)

config/filter.d/asterisk.conf

@@ -13,18 +13,21 @@ _daemon = asterisk
 
 __pid_re = (?:\[\d+\])
 
-# All Asterisk log messages begin like this:
-log_prefix= (?:NOTICE|SECURITY)%(__pid_re)s:?(?:\[C-[\da-f]*\])? \S+:\d*( in \w+:)?
+iso8601 = \d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}\.\d+[+-]\d{4}
 
-failregex = ^(%(__prefix_line)s|\[\]\s*)%(log_prefix)s Registration from '[^']*' failed for '<HOST>(:\d+)?' - (Wrong password|Username/auth name mismatch|No matching peer found|Not a local domain|Device does not match ACL|Peer is not supposed to register|ACL error \(permit/deny\)|Not a local domain)$
-            ^(%(__prefix_line)s|\[\]\s*)%(log_prefix)s Call from '[^']*' \(<HOST>:\d+\) to extension '\d+' rejected because extension not found in context 'default'\.$
-            ^(%(__prefix_line)s|\[\]\s*)%(log_prefix)s Host <HOST> failed to authenticate as '[^']*'$
-            ^(%(__prefix_line)s|\[\]\s*)%(log_prefix)s No registration for peer '[^']*' \(from <HOST>\)$
-            ^(%(__prefix_line)s|\[\]\s*)%(log_prefix)s Host <HOST> failed MD5 authentication for '[^']*' \([^)]+\)$
-            ^(%(__prefix_line)s|\[\]\s*)%(log_prefix)s Failed to authenticate (user|device) [^@]+@<HOST>\S*$
-            ^(%(__prefix_line)s|\[\]\s*)%(log_prefix)s (?:handle_request_subscribe: )?Sending fake auth rejection for (device|user) \d*<sip:[^@]+@<HOST>>;tag=\w+\S*$
-            ^(%(__prefix_line)s|\[\]\s*)%(log_prefix)s SecurityEvent="(FailedACL|InvalidAccountID|ChallengeResponseFailed|InvalidPassword)",EventTV="[\d-]+",Severity="[\w]+",Service="[\w]+",EventVersion="\d+",AccountID="\d*",SessionID="0x[\da-f]+",LocalAddress="IPV[46]/(UD|TC)P/[\da-fA-F:.]+/\d+",RemoteAddress="IPV[46]/(UD|TC)P/<HOST>/\d+"(,Challenge="\w+",ReceivedChallenge="\w+")?(,ReceivedHash="[\da-f]+")?(,ACLName="\w+")?$
-            ^(%(__prefix_line)s|\[\]\s*WARNING%(__pid_re)s:?(?:\[C-[\da-f]*\])? )Ext\. s: "Rejecting unknown SIP connection from <HOST>"$
+# All Asterisk log messages begin like this:
+log_prefix= (?:NOTICE|SECURITY|WARNING)%(__pid_re)s:?(?:\[C-[\da-f]*\])? [^:]+:\d*(?:(?: in)? \w+:)?
+
+failregex = ^%(__prefix_line)s%(log_prefix)s Registration from '[^']*' failed for '<HOST>(:\d+)?' - (Wrong password|Username/auth name mismatch|No matching peer found|Not a local domain|Device does not match ACL|Peer is not supposed to register|ACL error \(permit/deny\)|Not a local domain)$
+            ^%(__prefix_line)s%(log_prefix)s Call from '[^']*' \(<HOST>:\d+\) to extension '[^']*' rejected because extension not found in context
+            ^%(__prefix_line)s%(log_prefix)s Host <HOST> failed to authenticate as '[^']*'$
+            ^%(__prefix_line)s%(log_prefix)s No registration for peer '[^']*' \(from <HOST>\)$
+            ^%(__prefix_line)s%(log_prefix)s Host <HOST> failed MD5 authentication for '[^']*' \([^)]+\)$
+            ^%(__prefix_line)s%(log_prefix)s Failed to authenticate (user|device) [^@]+@<HOST>\S*$
+            ^%(__prefix_line)s%(log_prefix)s hacking attempt detected '<HOST>'$
+            ^%(__prefix_line)s%(log_prefix)s SecurityEvent="(FailedACL|InvalidAccountID|ChallengeResponseFailed|InvalidPassword)",EventTV="([\d-]+|%(iso8601)s)",Severity="[\w]+",Service="[\w]+",EventVersion="\d+",AccountID="(\d*|<unknown>)",SessionID=".+",LocalAddress="IPV[46]/(UDP|TCP|WS)/[\da-fA-F:.]+/\d+",RemoteAddress="IPV[46]/(UDP|TCP|WS)/<HOST>/\d+"(,Challenge="[\w/]+")?(,ReceivedChallenge="\w+")?(,Response="\w+",ExpectedResponse="\w*")?(,ReceivedHash="[\da-f]+")?(,ACLName="\w+")?$
+            ^%(__prefix_line)s%(log_prefix)s "Rejecting unknown SIP connection from <HOST>"$
+            ^%(__prefix_line)s%(log_prefix)s Request (?:'[^']*' )?from '[^']*' failed for '<HOST>(?::\d+)?'\s\(callid: [^\)]*\) - (?:No matching endpoint found|Not match Endpoint(?: Contact)? ACL|(?:Failed|Error) to authenticate)\s*$
 
 ignoreregex =
 

config/filter.d/botsearch-common.conf

@@ -0,0 +1,19 @@
+# Generic configuration file for -botsearch filters
+
+[Init]
+
+# Block is the actual non-found directories to block
+block = \/?(<webmail>|<phpmyadmin>|<wordpress>|cgi-bin|mysqladmin)[^,]*
+
+# These are just convient definitions that assist the blocking of stuff that 
+# isn't installed
+webmail = roundcube|(ext)?mail|horde|(v-?)?webmail
+
+phpmyadmin = (typo3/|xampp/|admin/|)(pma|(php)?[Mm]y[Aa]dmin)
+
+wordpress = wp-(login|signup|admin)\.php
+
+# DEV Notes:
+# Taken from apache-botsearch filter
+# 
+# Author: Frantisek Sumsal

config/filter.d/common.conf

@@ -26,7 +26,7 @@ __daemon_re = [\[\(]?%(_daemon)s(?:\(\S+\))?[\]\)]?:?
 
 # extra daemon info
 # EXAMPLE: [ID 800047 auth.info]
-__daemon_extra_re = (?:\[ID \d+ \S+\])
+__daemon_extra_re = \[ID \d+ \S+\]
 
 # Combinations of daemon name and PID
 # EXAMPLES: sshd[31607], pop(pam_unix)[4920]
@@ -44,13 +44,21 @@ __md5hex = (?:[\da-f]{2}:){15}[\da-f]{2}
 
 # bsdverbose is where syslogd is started with -v or -vv and results in <4.3> or
 # <auth.info> appearing before the host as per testcases/files/logs/bsd/*.
-__bsd_syslog_verbose = (<[^.]+\.[^.]+>)
+__bsd_syslog_verbose = <[^.]+\.[^.]+>
+
+__vserver = @vserver_\S+
+
+__date_ambit = (?:\[\])
 
 # Common line prefixes (beginnings) which could be used in filters
 #
 #      [bsdverbose]? [hostname] [vserver tag] daemon_id spaces
 #
 # This can be optional (for instance if we match named native log files)
-__prefix_line = \s*%(__bsd_syslog_verbose)s?\s*(?:%(__hostname)s )?(?:%(__kernel_prefix)s )?(?:@vserver_\S+ )?%(__daemon_combs_re)s?\s%(__daemon_extra_re)s?\s*
+__prefix_line = %(__date_ambit)s?\s*(?:%(__bsd_syslog_verbose)s\s+)?(?:%(__hostname)s\s+)?(?:%(__kernel_prefix)s\s+)?(?:%(__vserver)s\s+)?(?:%(__daemon_combs_re)s\s+)?(?:%(__daemon_extra_re)s\s+)?
+
+# PAM authentication mechanism check for failures, e.g.: pam_unix, pam_sss,
+# pam_ldap
+__pam_auth = pam_unix
 
 # Author: Yaroslav Halchenko

config/filter.d/counter-strike.conf

@@ -6,6 +6,7 @@
 
 failregex = ^: Bad Rcon: "rcon \d+ "\S+"  sv_contact ".*?"" from "<HOST>:\d+"$
 
+ignoreregex =
 
 [Init]
 

config/filter.d/courier-smtp.conf

@@ -13,7 +13,7 @@ before = common.conf
 _daemon = courieresmtpd
 
 failregex = ^%(__prefix_line)serror,relay=<HOST>,.*: 550 User (<.*> )?unknown\.?$
-            ^%(__prefix_line)serror,relay=<HOST>,msg="535 Authentication failed\.",cmd:( AUTH \S+)?( [0-9a-zA-Z\+/=]+)?$
+            ^%(__prefix_line)serror,relay=<HOST>,msg="535 Authentication failed\.",cmd:( AUTH \S+)?( [0-9a-zA-Z\+/=]+)?(?: \S+)$
 
 ignoreregex = 
 

config/filter.d/cyrus-imap.conf

@@ -13,7 +13,7 @@ before = common.conf
 
 _daemon = (?:cyrus/)?(?:imap(d|s)?|pop3(d|s)?)
 
-failregex = ^%(__prefix_line)sbadlogin: \S+ ?\[<HOST>\] \S+ .*?\[?SASL\(-13\): (authentication failure|user not found): .*\]?$
+failregex = ^%(__prefix_line)sbadlogin: [^\[]*\[<HOST>\] \S+ .*?\[?SASL\(-13\): (authentication failure|user not found): .*\]?$
 
 ignoreregex = 
 

config/filter.d/domino-smtp.conf

@@ -0,0 +1,47 @@
+# Fail2Ban configuration file for IBM Domino SMTP Server TASK to detect failed login attempts
+#
+# Author: Christian Brandlehner
+#
+# $Revision: 003 $
+#
+# Configuration:
+# Set the following Domino Server parameters in notes.ini:
+#       console_log_enabled=1
+#       log_sessions=2
+# You also have to use a date and time format supported by fail2ban. Recommended notes.ini configuration is:
+#       DateOrder=DMY
+#       DateSeparator=-
+#       ClockType=24_Hour
+#       TimeSeparator=:
+#
+# Depending on your locale you might have to tweak the date and time format so fail2ban can read the log
+
+#[INCLUDES]
+# Read common prefixes. If any customizations available -- read them from
+# common.local
+#before = common.conf
+
+[Definition]
+# Option:  failregex
+# Notes.:  regex to match the password failure messages in the logfile. The
+#          host must be matched by a group named "host". The tag "<HOST>" can
+#          be used for standard IP/hostname matching and is only an alias for
+#          (?:::f{4,6}:)?(?P<host>\S+)
+# Values:  TEXT
+#
+# Sample log entries (used different time formats and an extra sample with process info in front of date)
+# 01-23-2009 19:54:51   SMTP Server: Authentication failed for user postmaster ; connecting host 1.2.3.4
+# [28325:00010-3735542592] 22-06-2014 09:56:12   smtp: postmaster [1.2.3.4] authentication failure using internet password
+# 08-09-2014 06:14:27   smtp: postmaster [1.2.3.4] authentication failure using internet password
+# 08-09-2014 06:14:27   SMTP Server: Authentication failed for user postmaster ; connecting host 1.2.3.4
+
+__prefix = (?:\[[^\]]+\])?\s+
+failregex = ^%(__prefix)sSMTP Server: Authentication failed for user .*? \; connecting host <HOST>$
+            ^%(__prefix)ssmtp: (?:[^\[]+ )*\[<HOST>\] authentication failure using internet password\s*$
+# Option:  ignoreregex
+# Notes.:  regex to ignore. If this regex matches, the line is ignored.
+# Values:  TEXT
+#
+
+ignoreregex =
+

config/filter.d/dovecot.conf

@@ -9,9 +9,11 @@ before = common.conf
 
 _daemon = (auth|dovecot(-auth)?|auth-worker)
 
-failregex = ^%(__prefix_line)s(pam_unix(\(dovecot:auth\))?:)?\s+authentication failure; logname=\S* uid=\S* euid=\S* tty=dovecot ruser=\S* rhost=<HOST>(\s+user=\S*)?\s*$
-            ^%(__prefix_line)s(pop3|imap)-login: (Info: )?(Aborted login|Disconnected)(: Inactivity)? \(((auth failed, \d+ attempts)( in \d+ secs)?|tried to use (disabled|disallowed) \S+ auth)\):( user=<\S*>,)?( method=\S+,)? rip=<HOST>(, lip=(\d{1,3}\.){3}\d{1,3})?(, TLS( handshaking(: SSL_accept\(\) failed: error:[\dA-F]+:SSL routines:[TLS\d]+_GET_CLIENT_HELLO:unknown protocol)?)?(: Disconnected)?)?(, session=<\S+>)?\s*$
-            ^%(__prefix_line)s(Info|dovecot: auth\(default\)): pam\(\S+,<HOST>\): pam_authenticate\(\) failed: (User not known to the underlying authentication module: \d+ Time\(s\)|Authentication failure \(password mismatch\?\))\s*$
+failregex = ^%(__prefix_line)s(?:%(__pam_auth)s(?:\(dovecot:auth\))?:)?\s+authentication failure; logname=\S* uid=\S* euid=\S* tty=dovecot ruser=\S* rhost=<HOST>(?:\s+user=\S*)?\s*$
+            ^%(__prefix_line)s(?:pop3|imap)-login: (?:Info: )?(?:Aborted login|Disconnected)(?::(?: [^ \(]+)+)? \((?:auth failed, \d+ attempts( in \d+ secs)?|tried to use (disabled|disallowed) \S+ auth)\):( user=<[^>]+>,)?( method=\S+,)? rip=<HOST>(?:, lip=\S+)?(?:, TLS(?: handshaking(?:: SSL_accept\(\) failed: error:[\dA-F]+:SSL routines:[TLS\d]+_GET_CLIENT_HELLO:unknown protocol)?)?(: Disconnected)?)?(, session=<\S+>)?\s*$
+            ^%(__prefix_line)s(?:Info|dovecot: auth\(default\)|auth-worker\(\d+\)): pam\(\S+,<HOST>\): pam_authenticate\(\) failed: (User not known to the underlying authentication module: \d+ Time\(s\)|Authentication failure \(password mismatch\?\))\s*$
+            ^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): (?:pam|passwd-file)\(\S+,<HOST>\): unknown user\s*$
+            ^%(__prefix_line)s(?:auth|auth-worker\(\d+\)): Info: ldap\(\S*,<HOST>,\S*\): invalid credentials\s*$
 
 ignoreregex = 
 
@@ -21,9 +23,11 @@ journalmatch = _SYSTEMD_UNIT=dovecot.service
 
 # DEV Notes:
 # * the first regex is essentially a copy of pam-generic.conf
-# * Probably doesn't do dovecot sql/ldap backends properly
+# * Probably doesn't do dovecot sql/ldap backends properly (resolved in edit 21/03/2016)
 # * Removed the 'no auth attempts' log lines from the matches because produces
 #    lots of false positives on misconfigured MTAs making regexp unusable
 #
 # Author: Martin Waschbuesch
 #         Daniel Black (rewrote with begin and end anchors)
+#         Martin O'Neal (added LDAP authentication failure regex)
+#         Sergey G. Brester aka sebres (reviewed, optimized, IPv6-compatibility)

config/filter.d/drupal-auth.conf

@@ -0,0 +1,26 @@
+# Fail2Ban filter to block repeated failed login attempts to Drupal site(s)
+#
+#
+# Drupal must be setup to use Syslog, which defaults to the following format:
+#
+#   !base_url|!timestamp|!type|!ip|!request_uri|!referer|!uid|!link|!message
+#
+#
+
+[INCLUDES]
+
+before = common.conf
+
+
+[Definition]
+
+failregex = ^%(__prefix_line)s(https?:\/\/)([\da-z\.-]+)\.([a-z\.]{2,6})(\/[\w\.-]+)*\|\d{10}\|user\|<HOST>\|.+\|.+\|\d\|.*\|Login attempt failed for .+\.$
+
+ignoreregex =
+
+
+# DEV Notes:
+#
+# https://www.drupal.org/documentation/modules/syslog
+#
+# Author: Lee Clemens

config/filter.d/exim-common.conf

@@ -9,8 +9,10 @@ after = exim-common.local
 
 [Definition]
 
-host_info = H=([\w.-]+ )?(\(\S+\) )?\[<HOST>\](:\d+)? (I=\[\S+\]:\d+ )?(U=\S+ )?(P=e?smtp )?
-pid = ( \[\d+\])?
+host_info_pre = (?:H=([\w.-]+ )?(?:\(\S+\) )?)?
+host_info_suf = (?::\d+)?(?: I=\[\S+\](:\d+)?)?(?: U=\S+)?(?: P=e?smtp)?(?: F=(?:<>|[^@]+@\S+))?\s
+host_info = %(host_info_pre)s\[<HOST>\]%(host_info_suf)s
+pid = (?: \[\d+\])?
 
 # DEV Notes:
 # From exim source code: ./src/receive.c:add_host_info_for_log

config/filter.d/exim.conf

@@ -14,10 +14,13 @@ before = exim-common.conf
 [Definition]
 
 failregex = ^%(pid)s %(host_info)ssender verify fail for <\S+>: (?:Unknown user|Unrouteable address|all relevant MX records point to non-existent hosts)\s*$
-             ^%(pid)s \w+ authenticator failed for (\S+ )?\(\S+\) \[<HOST>\]: 535 Incorrect authentication data( \(set_id=.*\)|: \d+ Time\(s\))?\s*$
-             ^%(pid)s %(host_info)sF=(<>|[^@]+@\S+) rejected RCPT [^@]+@\S+: (relay not permitted|Sender verify failed|Unknown user)\s*$
-             ^%(pid)s SMTP protocol synchronization error \([^)]*\): rejected (connection from|"\S+") %(host_info)s(next )?input=".*"\s*$
-             ^%(pid)s SMTP call from \S+ \[<HOST>\](:\d+)? (I=\[\S+\]:\d+ )?dropped: too many nonmail commands \(last was "\S+"\)\s*$
+            ^%(pid)s \w+ authenticator failed for (?:[^\[\( ]* )?(?:\(\S*\) )?\[<HOST>\](?::\d+)?(?: I=\[\S+\](:\d+)?)?: 535 Incorrect authentication data( \(set_id=.*\)|: \d+ Time\(s\))?\s*$
+            ^%(pid)s %(host_info)srejected RCPT [^@]+@\S+: (?:relay not permitted|Sender verify failed|Unknown user|Unrouteable address)\s*$
+            ^%(pid)s SMTP protocol synchronization error \([^)]*\): rejected (?:connection from|"\S+") %(host_info)s(?:next )?input=".*"\s*$
+            ^%(pid)s SMTP call from \S+ %(host_info)sdropped: too many nonmail commands \(last was "\S+"\)\s*$
+            ^%(pid)s SMTP protocol error in "AUTH \S*(?: \S*)?" %(host_info)sAUTH command used when not advertised\s*$
+            ^%(pid)s no MAIL in SMTP connection from (?:[^\[\( ]* )?(?:\(\S*\) )?%(host_info)sD=\d\S+s(?: C=\S*)?\s*$
+            ^%(pid)s (?:[\w\-]+ )?SMTP connection from (?:[^\[\( ]* )?(?:\(\S*\) )?%(host_info)sclosed by DROP in ACL\s*$
 
 ignoreregex = 
 
@@ -30,3 +33,4 @@ ignoreregex =
 #
 # Author: Cyril Jaquier
 #         Daniel Black (rewrote with strong regexs)
+#         Martin O'Neal (added additional regexs to detect authentication failures, protocol errors, and drops)

config/filter.d/freeswitch.conf

@@ -16,7 +16,7 @@ failregex = ^\.\d+ \[WARNING\] sofia_reg\.c:\d+ SIP auth (failure|challenge) \((
 ignoreregex =
 
 # Author: Rupa SChomaker, soapee01, Daniel Black
-# http://wiki.freeswitch.org/wiki/Fail2ban
+# https://freeswitch.org/confluence/display/FREESWITCH/Fail2Ban
 # Thanks to Jim on mailing list of samples and guidance
 #
 # No need to match the following. Its a duplicate of the SIP auth regex.

config/filter.d/froxlor-auth.conf

@@ -0,0 +1,37 @@
+# Fail2Ban configuration file to block repeated failed login attempts to Frolor installation(s)
+# 
+# Froxlor needs to log to Syslog User (e.g. /var/log/user.log) with one of the following messages
+# <syslog prefix> Froxlor: [Login Action <HOST>] Unknown user '<USER>' tried to login.
+# <syslog prefix> Froxlor: [Login Action <HOST>] User '<USER>' tried to login with wrong password.
+#
+# Author: Joern Muehlencord
+#
+
+[INCLUDES]
+
+# Read common prefixes. If any customizations available -- read them from
+# common.local
+before = common.conf
+
+
+[Definition]
+
+_daemon = Froxlor
+
+# Option:  failregex
+# Notes.:  regex to match the password failures messages in the logfile. The
+#          host must be matched by a group named "host". The tag "<HOST>" can
+#          be used for standard IP/hostname matching and is only an alias for
+#          (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
+# Values:  TEXT
+#
+failregex = ^%(__prefix_line)s\[Login Action <HOST>\] Unknown user \S* tried to login.$
+            ^%(__prefix_line)s\[Login Action <HOST>\] User \S* tried to login with wrong password.$
+
+
+# Option:  ignoreregex
+# Notes.:  regex to ignore. If this regex matches, the line is ignored.
+# Values:  TEXT
+#
+ignoreregex =
+

config/filter.d/groupoffice.conf

@@ -8,7 +8,7 @@
 
 failregex = ^\[\]LOGIN FAILED for user: "\S+" from IP: <HOST>$
 
-
+ignoreregex =
 
 # Author: Daniel Black
 

config/filter.d/haproxy-http-auth.conf

@@ -0,0 +1,37 @@
+# Fail2Ban filter configuration file to match failed login attempts to
+# HAProxy HTTP Authentication protected servers.
+#
+# PLEASE NOTE - When a user first hits the HTTP Auth a 401 is returned by the server
+# which prompts their browser to ask for login details.
+# This initial 401 is logged by HAProxy.
+# In other words, even successful logins will have at least 1 fail regex match.
+# Please keep this in mind when setting findtime and maxretry for jails.
+#
+# Author: Jordan Moeser
+#
+
+[INCLUDES]
+
+# Read common prefixes. If any customizations available -- read them from
+# common.local
+before = common.conf
+
+
+[Definition]
+
+_daemon = haproxy
+
+# Option:  failregex
+# Notes.:  regex to match the password failures messages in the logfile. The
+#          host must be matched by a group named "host". The tag "<HOST>" can
+#          be used for standard IP/hostname matching and is only an alias for
+#          (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
+# Values:  TEXT
+#
+failregex = ^%(__prefix_line)s<HOST>.*<NOSRV> -1/-1/-1/-1/\+*\d* 401
+
+# Option:  ignoreregex
+# Notes.:  regex to ignore. If this regex matches, the line is ignored.
+# Values:  TEXT
+#
+ignoreregex =

config/filter.d/ignorecommands/apache-fakegooglebot

@@ -0,0 +1,35 @@
+#!/usr/bin/env fail2ban-python
+# Inspired by https://isc.sans.edu/forums/diary/When+Google+isnt+Google/15968/
+#
+# Written in Python to reuse built-in Python batteries and not depend on
+# presence of host and cut commands
+#
+import sys
+
+def process_args(argv):
+    if len(argv) != 2:
+       sys.stderr.write("Please provide a single IP as an argument. Got: %s\n"
+                        % (argv[1:]))
+       sys.exit(2)
+
+    ip = argv[1]
+
+    from fail2ban.server.filter import DNSUtils
+    if not DNSUtils.isValidIP(ip):
+       sys.stderr.write("Argument must be a single valid IP. Got: %s\n"
+                        % ip)
+       sys.exit(3)
+    return ip
+
+def is_googlebot(ip):
+    import re
+    from fail2ban.server.filter import DNSUtils
+
+    host = DNSUtils.ipToName(ip)
+    if not host or not re.match('.*\.google(bot)?\.com$', host):
+       sys.exit(1)
+    host_ips = DNSUtils.dnsToIp(host)
+    sys.exit(0 if ip in host_ips else 1)
+
+if __name__ == '__main__':
+    is_googlebot(process_args(sys.argv))

config/filter.d/kerio.conf

@@ -6,6 +6,9 @@ failregex = ^ SMTP Spam attack detected from <HOST>,
             ^ IP address <HOST> found in DNS blacklist \S+, mail from \S+ to \S+$
             ^ Relay attempt from IP address <HOST>
             ^ Attempt to deliver to unknown recipient \S+, from \S+, IP address <HOST>$
+
+ignoreregex =
+
 [Init]
 
 datepattern = ^\[%%d/%%b/%%Y %%H:%%M:%%S\]

config/filter.d/mongodb-auth.conf

@@ -0,0 +1,49 @@
+# Fail2Ban filter for unsuccesfull MongoDB authentication attempts
+#
+# Logfile /var/log/mongodb/mongodb.log
+#
+# add setting in /etc/mongodb.conf
+# logpath=/var/log/mongodb/mongodb.log
+#
+# and use of the authentication
+# auth = true
+#
+
+[Definition]
+#failregex = ^\s+\[initandlisten\] connection accepted from <HOST>:\d+ \#(?P<__connid>\d+) \(1 connection now open\)<SKIPLINES>\s+\[conn(?P=__connid)\] Failed to authenticate\s+
+failregex = ^\s+\[conn(?P<__connid>\d+)\] Failed to authenticate [^\n]+<SKIPLINES>\s+\[conn(?P=__connid)\] end connection <HOST>
+
+ignoreregex =
+
+
+[Init]
+maxlines = 10
+
+# DEV Notes:
+#
+# Regarding the multiline regex:
+#
+# There can be a nunber of non-related lines between the first and second part
+# of this regex maxlines of 10 is quite generious.
+#
+# Note the capture __connid, includes the connection ID, used in second part of regex.
+#
+# The first regex is commented out (but will match also), because it is better to use
+# the host from "end connection" line (uncommented above):
+#  -  it has the same prefix, searching begins directly with failure message
+#     (so faster, because ignores success connections at all)
+#  -  it is not so vulnerable in case of possible race condition
+#
+# Log example:
+# 2016-10-20T09:54:27.108+0200 [initandlisten] connection accepted from 127.0.0.1:53276 #1 (1 connection now open)
+# 2016-10-20T09:54:27.109+0200 [conn1]  authenticate db: test { authenticate: 1, nonce: "xxx", user: "root", key: "xxx" }
+# 2016-10-20T09:54:27.110+0200 [conn1] Failed to authenticate root@test with mechanism MONGODB-CR: AuthenticationFailed UserNotFound Could not find user root@test
+# 2016-11-09T09:54:27.894+0100 [conn1] end connection 127.0.0.1:53276 (0 connections now open)
+# 2016-11-09T11:55:58.890+0100 [initandlisten] connection accepted from 127.0.0.1:54266 #1510 (1 connection now open)
+# 2016-11-09T11:55:58.892+0100 [conn1510]  authenticate db: admin { authenticate: 1, nonce: "xxx", user: "root", key: "xxx" }
+# 2016-11-09T11:55:58.892+0100 [conn1510] Failed to authenticate root@admin with mechanism MONGODB-CR: AuthenticationFailed key mismatch
+# 2016-11-09T11:55:58.894+0100 [conn1510] end connection 127.0.0.1:54266 (0 connections now open)
+#
+# Authors: Alexander Finkhäuser
+#          Sergey G. Brester (sebres)
+

config/filter.d/monit.conf

@@ -2,8 +2,20 @@
 #
 #
 
+[INCLUDES]
+
+# Read common prefixes. If any customizations available -- read them from
+# common.local
+before = common.conf
+
 [Definition]
 
-failregex = ^\[[A-Z]+\s+\]\s*error\s*:\s*Warning:\s+Client '<HOST>' supplied unknown user '\w+' accessing monit httpd$
-            ^\[[A-Z]+\s+\]\s*error\s*:\s*Warning:\s+Client '<HOST>' supplied wrong password for user '\w+' accessing monit httpd$
+_daemon = monit
 
+# Regexp for previous (accessing monit httpd) and new (access denied) versions
+failregex = ^\[[A-Z]+\s+\]\s*error\s*:\s*Warning:\s+Client '<HOST>' supplied (?:unknown user '[^']+'|wrong password for user '[^']*') accessing monit httpd$
+            ^%(__prefix_line)s\w+: access denied -- client <HOST>: (?:unknown user '[^']+'|wrong password for user '[^']*'|empty password)$
+
+# Ignore login with empty user (first connect, no user specified)
+# ignoreregex = %(__prefix_line)s\w+: access denied -- client <HOST>: (?:unknown user '')
+ignoreregex =

config/filter.d/murmur.conf

@@ -0,0 +1,28 @@
+# Fail2Ban filter for murmur/mumble-server
+#
+
+[INCLUDES]
+
+before = common.conf
+
+
+[Definition]
+
+_daemon = murmurd
+
+# N.B. If you allow users to have usernames that include the '>' character you
+#      should change this to match the regex assigned to the 'username'
+#      variable in your server config file (murmur.ini / mumble-server.ini).
+_usernameregex = [^>]+
+
+_prefix = <W>[\n\s]*(\.\d{3})?\s+\d+ => <\d+:%(_usernameregex)s\(-1\)> Rejected connection from <HOST>:\d+:
+
+failregex = ^%(_prefix)s Invalid server password$
+            ^%(_prefix)s Wrong certificate or password for existing user$
+
+ignoreregex =
+
+
+# DEV Notes:
+#
+# Author: Ross Brown

config/filter.d/mysqld-auth.conf

@@ -1,4 +1,4 @@
-# Fail2Ban filter for unsuccesfull MySQL authentication attempts
+# Fail2Ban filter for unsuccesful MySQL authentication attempts
 #
 #
 # To log wrong MySQL access attempts add to /etc/my.cnf in [mysqld]:
@@ -17,7 +17,7 @@ before = common.conf
 
 _daemon = mysqld
 
-failregex = ^%(__prefix_line)s(\d{6} \s?\d{1,2}:\d{2}:\d{2} )?\[Warning\] Access denied for user '\w+'@'<HOST>' (to database '[^']*'|\(using password: (YES|NO)\))*\s*$
+failregex = ^%(__prefix_line)s(?:\d+ |\d{6} \s?\d{1,2}:\d{2}:\d{2} )?\[\w+\] Access denied for user '[^']+'@'<HOST>' (to database '[^']*'|\(using password: (YES|NO)\))*\s*$
 
 ignoreregex = 
 

config/filter.d/named-refused.conf

@@ -38,6 +38,8 @@ failregex = ^%(__line_prefix)s( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: (vie
             ^%(__line_prefix)s( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: zone transfer '\S+/AXFR/\w+' denied\s*$
             ^%(__line_prefix)s( error:)?\s*client <HOST>#\S+( \([\S.]+\))?: bad zone transfer request: '\S+/IN': non-authoritative zone \(NOTAUTH\)\s*$
 
+ignoreregex =
+
 # DEV Notes:
 # Trying to generalize the
 #          structure which is general to capture general patterns in log

config/filter.d/nginx-botsearch.conf

@@ -0,0 +1,20 @@
+# Fail2Ban filter to match web requests for selected URLs that don't exist
+#
+
+[INCLUDES]
+
+# Load regexes for filtering
+before = botsearch-common.conf
+
+[Definition]
+
+failregex = ^<HOST> \- \S+ \[\] \"(GET|POST|HEAD) \/<block> \S+\" 404 .+$
+            ^ \[error\] \d+#\d+: \*\d+ (\S+ )?\"\S+\" (failed|is not found) \(2\: No such file or directory\), client\: <HOST>\, server\: \S*\, request: \"(GET|POST|HEAD) \/<block> \S+\"\, .*?$
+
+ignoreregex = 
+
+
+# DEV Notes:
+# Based on apache-botsearch filter
+# 
+# Author: Frantisek Sumsal

config/filter.d/nginx-limit-req.conf

@@ -0,0 +1,45 @@
+# Fail2ban filter configuration for nginx :: limit_req
+# used to ban hosts, that were failed through nginx by limit request processing rate 
+#
+# Author: Serg G. Brester (sebres)
+#
+# To use 'nginx-limit-req' filter you should have `ngx_http_limit_req_module`
+# and define `limit_req` and `limit_req_zone` as described in nginx documentation
+# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html
+#
+# Example:
+#
+#   http {
+#     ...
+#     limit_req_zone $binary_remote_addr zone=lr_zone:10m rate=1r/s;
+#     ...
+#     # http, server, or location:
+#     location ... {
+#       limit_req zone=lr_zone burst=1 nodelay;
+#       ...
+#     }
+#     ...
+#   }
+#   ...
+#
+
+[Definition]
+
+# Specify following expression to define exact zones, if you want to ban IPs limited 
+# from specified zones only.
+# Example:
+#
+#   ngx_limit_req_zones = lr_zone|lr_zone2
+#
+ngx_limit_req_zones = [^"]+
+
+# Use following full expression if you should range limit request to specified 
+# servers, requests, referrers etc. only :
+#
+# failregex = ^\s*\[error\] \d+#\d+: \*\d+ limiting requests, excess: [\d\.]+ by zone "(?:%(ngx_limit_req_zones)s)", client: <HOST>, server: \S*, request: "\S+ \S+ HTTP/\d+\.\d+", host: "\S+"(, referrer: "\S+")?\s*$
+
+# Shortly, much faster and stable version of regexp:
+failregex = ^\s*\[error\] \d+#\d+: \*\d+ limiting requests, excess: [\d\.]+ by zone "(?:%(ngx_limit_req_zones)s)", client: <HOST>
+
+ignoreregex = 
+

config/filter.d/nsd.conf

@@ -22,5 +22,7 @@ _daemon = nsd
 #          (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
 # Values:  TEXT
 
-failregex =  ^\[\]%(__prefix_line)sinfo: ratelimit block .* query <HOST> TYPE255$
-              ^\[\]%(__prefix_line)sinfo: .* <HOST> refused, no acl matches\.$
+failregex =  ^%(__prefix_line)sinfo: ratelimit block .* query <HOST> TYPE255$
+             ^%(__prefix_line)sinfo: .* <HOST> refused, no acl matches\.$
+
+ignoreregex =