changelog for debian packager.

gitignore
changed requirements to python3
2014-09-12 23:00:30 -05:00 · 2014-09-12 22:27:43 -05:00 · 2014-09-12 22:25:55 -05:00 · 2014-09-12 22:25:40 -05:00 · 2014-09-12 22:24:52 -05:00 · 2014-09-12 21:54:01 -05:00
87 changed files with 2415 additions and 1362 deletions
@@ -1,3 +1,4 @@
+.pc/*
 *~
 build
 dist
@@ -16,8 +16,6 @@ install:
  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then cd ..; pip install -q coveralls; cd -; fi
 script:
  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then coverage run --rcfile=.travis_coveragerc setup.py test; else python setup.py test; fi
-# test installation
-  - sudo python setup.py install
 after_success:
 # Coverage config file must be .coveragerc for coveralls
  - if [[ $TRAVIS_PYTHON_VERSION == 2.7 ]]; then cp -v .travis_coveragerc .coveragerc; fi
@@ -0,0 +1,181 @@
+#!/usr/bin/perl
+##########################################################################
+# $Id: fail2ban 150 2013-06-18 22:19:38Z mtremaine $
+##########################################################################
+# $Log: fail2ban,v $
+# Revision 1.5  2008/08/18 16:07:46  mike
+# Patches from Paul Gear <paul at libertysys.com> -mgt
+#
+# Revision 1.4  2008/06/30 23:07:51  kirk
+# fixed copyright holders for files where I know who they should be
+#
+# Revision 1.3  2008/03/24 23:31:26  kirk
+# added copyright/license notice to each script
+#
+# Revision 1.2  2006/12/15 04:53:59  bjorn
+# Additional filtering, by Willi Mann.
+#
+# Revision 1.1  2006/05/30 19:04:26  bjorn
+# Added fail2ban service, written by Yaroslav Halchenko.
+#
+# Written by Yaroslav Halchenko <debian@onerussian.com> for fail2ban
+#
+##########################################################################
+
+########################################################
+## Copyright (c) 2008  Yaroslav Halchenko
+## Covered under the included MIT/X-Consortium License:
+##    http://www.opensource.org/licenses/mit-license.php
+## All modifications and contributions by other persons to
+## this script are assumed to have been donated to the
+## Logwatch project and thus assume the above copyright
+## and licensing terms.  If you want to make contributions
+## under your own copyright or a different license this
+## must be explicitly stated in the contribution an the
+## Logwatch project reserves the right to not accept such
+## contributions.  If you have made significant
+## contributions to this script and want to claim
+## copyright please contact logwatch-devel@lists.sourceforge.net.
+#########################################################
+
+use strict;
+use Logwatch ':all';
+
+my $Debug = $ENV{'LOGWATCH_DEBUG'} || 0;
+my $Detail = $ENV{'LOGWATCH_DETAIL_LEVEL'} || 0;
+my $IgnoreHost = $ENV{'sshd_ignore_host'} || "";
+my $DebugCounter = 0;
+my $ReInitializations = 0;
+my @IptablesErrors = ();
+my @ActionErrors = ();
+my $NotValidIP = 0;		# reported invalid IPs number
+my @OtherList = ();
+
+my %ServicesBans = ();
+
+if ( $Debug >= 5 ) {
+	print STDERR "\n\nDEBUG: Inside Fail2Ban Filter \n\n";
+	$DebugCounter = 1;
+}
+
+while (defined(my $ThisLine = <STDIN>)) {
+    if ( $Debug >= 5 ) {
+	print STDERR "DEBUG($DebugCounter): $ThisLine";
+	$DebugCounter++;
+    }
+    chomp($ThisLine);
+    if ( ($ThisLine =~ /..,... DEBUG: /) or
+	 ($ThisLine =~ /..,... \S*\s*: DEBUG /) or # syntax of 0.7.? fail2ban
+	 ($ThisLine =~ /..,... INFO: (Fail2Ban v.* is running|Exiting|Enabled sections:)/) or
+	 ($ThisLine =~ /INFO\s+Log rotation detected for/) or
+	 ($ThisLine =~ /INFO\s+Jail.+(?:stopped|started|uses poller)/) or
+	 ($ThisLine =~ /INFO\s+Changed logging target to/) or
+	 ($ThisLine =~ /INFO\s+Creating new jail/) or
+	 ($ThisLine =~ /..,... \S+\s*: INFO\s+(Set |Socket|Exiting|Gamin|Created|Added|Using)/) or # syntax of 0.7.? fail2ban
+	 ($ThisLine =~ /..,... WARNING: Verbose level is /) or
+	 ($ThisLine =~ /..,... WARNING: Restoring firewall rules/)
+       )
+    {
+	if ( $Debug >= 6 ) {
+	    print STDERR "DEBUG($DebugCounter): line ignored\n";
+	}
+    } elsif ( my ($Service,$Action,$Host) = ($ThisLine =~ m/WARNING:?\s\[?(.*?)[]:]?\s(Ban|Unban)[^\.]* (\S+)/)) {
+	if ( $Debug >= 6 ) {
+	    print STDERR "DEBUG($DebugCounter): Found $Action for $Service from $Host\n";
+	}
+	$ServicesBans{$Service}{$Host}{$Action}++;
+	$ServicesBans{$Service}{"(all)"}{$Action}++;
+    } elsif ( my ($Service,$Host,$NumFailures) = ($ThisLine =~ m/INFO: (\S+): (.+) has (\d+) login failure\(s\). Banned./)) {
+	if ($Debug >= 4) {
+	    print STDERR "DEBUG: Found host $Host trying to access $Service - failed $NumFailures times\n";
+	}
+	push @{$ServicesBans{$Service}{$Host}{'Failures'}}, $NumFailures;
+    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/ ERROR:\s(.*):\s(\S+)\salready in ban list/)) {
+   	 $ServicesBans{$Service}{$Host}{'AlreadyInTheList'}++;
+    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/WARNING\s*\[(.*)\]\s*(\S+)\s*already banned/)) {
+       $ServicesBans{$Service}{$Host}{'AlreadyInTheList'}++;
+    } elsif ( my ($Service,$Host) = ($ThisLine =~ m/ WARNING:\s(.*):\sReBan (\S+)/)) {
+	    $ServicesBans{$Service}{$Host}{'ReBan'}++;
+    } elsif ($ThisLine =~ / ERROR:?\s*(Execution of command )?\'?iptables/) {
+	    push @IptablesErrors, "$ThisLine\n";
+    } elsif ($ThisLine =~ /ERROR.*returned \d+$/) {
+       push @ActionErrors, "$ThisLine\n";
+    } elsif (($ThisLine =~ /..,... WARNING: \#\S+ reinitialization of firewalls/) or
+	    ($ThisLine =~ / ERROR\s*Invariant check failed. Trying to restore a sane environment/)) {
+	    $ReInitializations++;
+    } elsif ($ThisLine =~ /..,... WARNING:  is not a valid IP address/) {
+	# just ignore - this will be fixed within fail2ban and is harmless warning
+    }
+    else
+    {
+	# Report any unmatched entries...
+	push @OtherList, "$ThisLine\n";
+    }
+}
+
+###########################################################
+
+
+if (keys %ServicesBans) {
+    printf("\nBanned services with Fail2Ban:				 Bans:Unbans\n");
+    foreach my $service (sort {$a cmp $b} keys %ServicesBans) {
+	printf("   %-55s [%3d:%-3d]\n", "$service:",
+	       $ServicesBans{$service}{'(all)'}{'Ban'},
+	       $ServicesBans{$service}{'(all)'}{'Unban'});
+	delete $ServicesBans{$service}{'(all)'};
+	my $totalSort = TotalCountOrder(%{$ServicesBans{$service}}, \&SortIP);
+	if ($Detail >= 5) {
+	    foreach my $ip (sort $totalSort keys %{$ServicesBans{$service}}) {
+		   my $name = LookupIP($ip);
+		   printf("      %-53s %3d:%-3d\n",
+		       $name,
+		       $ServicesBans{$service}{$ip}{'Ban'},
+		       $ServicesBans{$service}{$ip}{'Unban'});
+		   if (($Detail >= 10) and ($ServicesBans{$service}{$ip}{'Failures'}>0)) {
+		      print "	   Failed ";
+		      foreach my $fails (@{$ServicesBans{$service}{$ip}{'Failures'}}) {
+			      print " $fails";
+		      }
+		    print " times";
+		    printf("\n	   %d Duplicate Ban attempts", $ServicesBans{$service}{$ip}{'AlreadyInTheList'}) ;
+		    printf("\n	   %d ReBans due to rules reinitilizations", $ServicesBans{$service}{$ip}{'ReBan'}) ;
+		    print "\n";
+		   }
+	    }
+	   }
+    }
+}
+
+
+if ($Detail>0) {
+    if ($#IptablesErrors > 0) {
+	   printf("\n%d faulty iptables invocation(s)", $#IptablesErrors);
+	   if ($Detail > 5) {
+	    print ":\n";
+	    print @IptablesErrors ;
+	   }
+    }
+    if ($#ActionErrors > 0) {
+       printf("\n%d error(s) returned from actions", $#ActionErrors);
+       if ($Detail > 5) {
+           print ":\n";
+           print @ActionErrors ;
+       }
+    }
+    if ($ReInitializations > 0) {
+	   printf("\n%d fail2ban rules reinitialization(s)", $ReInitializations);
+    }
+    if ($#OtherList >= 0) {
+	   print "\n**Unmatched Entries**\n";
+	   print @OtherList;
+    }
+}
+
+exit(0);
+
+# vi: shiftwidth=3 tabstop=3 syntax=perl et
+# Local Variables:
+# mode: perl
+# perl-indent-level: 3
+# indent-tabs-mode: nil
+# End:
@@ -4,10 +4,10 @@
                       |_| \__,_|_|_/___|_.__/\__,_|_||_|

 ================================================================================
-Fail2Ban (version 0.9.1)                                              2014/10/29
+Fail2Ban (version 0.9.0.dev)                                          2014/xx/xx
 ================================================================================

-ver. 0.9.1 (2014/10/29) - better, faster, stronger
+ver. 0.9.1 (2014/xx/xx) - better, faster, stronger
 ----------

 - Refactoring (IMPORTANT -- Please review your setup and configuration):
@@ -16,8 +16,6 @@ ver. 0.9.1 (2014/10/29) - better, faster, stronger
     provides defaults for the chain, port, protocol and name tags

 - Fixes:
-   * start of file2ban aborted (on slow hosts, systemd considers the server has
-     been timed out and kills him), see gh-824
   * UTF-8 fixes in pure-ftp thanks to Johannes Weberhofer. Closes gh-806.
   * systemd backend error on bad utf-8 in python3
   * badips.py action error when logging HTTP error raised with badips request
@@ -50,26 +48,18 @@ ver. 0.9.1 (2014/10/29) - better, faster, stronger
   * cyrus-imap -- also catch also failed logins via secured (imaps/pop3s).
     Regression was introduced while strengthening failregex in 0.8.11 (bd175f)
     Debian bug #755173
-   * postfix-sasl - added journalmatch.  Thanks Luc Maisonobe
-   * postfix* - match with a new daemon string (postfix/submission/smtpd).
-     Closes gh-804 .  Thanks Paul Traina
-   * apache - added filter for AH01630 client denied by server configuration.
+   * postfix-sasl -- added journalmatch.  Thanks Luc Maisonobe

 - New features:
   - New filters:
     - monit  Thanks Jason H Martin
     - directadmin  Thanks niorg
-     - apache-shellshock  Thanks Eugene Hopkinson (SlowRiot)
   - New actions:
     - symbiosis-blacklist-allports  for Bytemark symbiosis firewall
   - fail2ban-client can fetch the running server version
   - Added Cloudflare API action

 - Enhancements
-   * Start performance of fail2ban-client (and tests) increased, start time
-     and cpu usage rapidly reduced. Introduced a shared storage logic, to
-     bypass reading lots of config files (see gh-824).
-     Thanks to Joost Molenaar for good catch (reported gh-820).
   * Fail2ban-regex - add print-all-matched option. Closes gh-652
   * Suppress fail2ban-client warnings for non-critical config options
   * Match non "Bye Bye" disconnect messages for sshd locked account regex
@@ -81,7 +71,6 @@ ver. 0.9.1 (2014/10/29) - better, faster, stronger
     not affect SYSLOG output
   * Log unhandled exceptions
   * cyrus-imap: catch "user not found" attempts
-   * Add support for Portsentry

 ver. 0.9.0 (2014/03/14) - beta
 ----------
@@ -81,18 +81,6 @@ some quick commands::
  status test


-Testing with vagrant
--------------------
-
-Testing can now be done inside a vagrant VM.  Vagrantfile provided in
-source code repository established two VMs:
-
- VM "secure" which can be used for testing fail2ban code.
- VM "attacker" which hcan be used to perform attack against our "secure" VM.
-
-Both VMs are sharing the 192.168.200/24 network. If you are using this network
-take a look into the Vagrantfile and change the IP.
-

 Coding Standards
 ================
@@ -1,14 +1,11 @@
-CONTRIBUTING.md
-COPYING
+README.md
+README.Solaris
 ChangeLog
+TODO
+THANKS
+COPYING
 DEVELOP
 FILTERS
-README.Solaris
-README.md
-RELEASE
-THANKS
-TODO
-Vagrantfile
 fail2ban-2to3
 fail2ban-testcases-all
 fail2ban-testcases-all-python3
@@ -17,108 +14,109 @@ bin/fail2ban-server
 bin/fail2ban-testcases
 bin/fail2ban-regex
 doc/run-rootless.txt
-fail2ban/client/__init__.py
-fail2ban/client/actionreader.py
-fail2ban/client/beautifier.py
-fail2ban/client/configparserinc.py
 fail2ban/client/configreader.py
+fail2ban/client/configparserinc.py
+fail2ban/client/jailreader.py
+fail2ban/client/fail2banreader.py
+fail2ban/client/jailsreader.py
+fail2ban/client/beautifier.py
+fail2ban/client/filterreader.py
+fail2ban/client/actionreader.py
+fail2ban/client/__init__.py
 fail2ban/client/configurator.py
 fail2ban/client/csocket.py
-fail2ban/client/fail2banreader.py
-fail2ban/client/filterreader.py
-fail2ban/client/jailreader.py
-fail2ban/client/jailsreader.py
-fail2ban/server/__init__.py
-fail2ban/server/action.py
-fail2ban/server/actions.py
 fail2ban/server/asyncserver.py
-fail2ban/server/banmanager.py
 fail2ban/server/database.py
-fail2ban/server/datedetector.py
-fail2ban/server/datetemplate.py
-fail2ban/server/faildata.py
-fail2ban/server/failmanager.py
-fail2ban/server/failregex.py
 fail2ban/server/filter.py
+fail2ban/server/filterpyinotify.py
 fail2ban/server/filtergamin.py
 fail2ban/server/filterpoll.py
-fail2ban/server/filterpyinotify.py
 fail2ban/server/filtersystemd.py
 fail2ban/server/iso8601.py
+fail2ban/server/server.py
+fail2ban/server/actions.py
+fail2ban/server/faildata.py
+fail2ban/server/failmanager.py
+fail2ban/server/datedetector.py
+fail2ban/server/jailthread.py
+fail2ban/server/transmitter.py
+fail2ban/server/action.py
+fail2ban/server/ticket.py
 fail2ban/server/jail.py
 fail2ban/server/jails.py
-fail2ban/server/jailthread.py
+fail2ban/server/__init__.py
+fail2ban/server/banmanager.py
+fail2ban/server/datetemplate.py
 fail2ban/server/mytime.py
-fail2ban/server/server.py
-fail2ban/server/strptime.py
-fail2ban/server/ticket.py
-fail2ban/server/transmitter.py
-fail2ban/tests/__init__.py
-fail2ban/tests/action_d/__init__.py
-fail2ban/tests/action_d/test_badips.py
-fail2ban/tests/action_d/test_smtp.py
-fail2ban/tests/actionstestcase.py
-fail2ban/tests/actiontestcase.py
+fail2ban/server/failregex.py
+fail2ban/server/database.py
 fail2ban/tests/banmanagertestcase.py
+fail2ban/tests/failmanagertestcase.py
 fail2ban/tests/clientreadertestcase.py
-fail2ban/tests/config/action.d/brokenaction.conf
-fail2ban/tests/config/fail2ban.conf
-fail2ban/tests/config/filter.d/simple.conf
+fail2ban/tests/filtertestcase.py
+fail2ban/tests/__init__.py
+fail2ban/tests/dummyjail.py
+fail2ban/tests/samplestestcase.py
+fail2ban/tests/datedetectortestcase.py
+fail2ban/tests/actiontestcase.py
+fail2ban/tests/servertestcase.py
+fail2ban/tests/sockettestcase.py
+fail2ban/tests/utils.py
+fail2ban/tests/misctestcase.py
+fail2ban/tests/databasetestcase.py
 fail2ban/tests/config/jail.conf
+fail2ban/tests/config/fail2ban.conf
 fail2ban/tests/config/paths-common.conf
-fail2ban/tests/config/paths-debian.conf
 fail2ban/tests/config/paths-freebsd.conf
 fail2ban/tests/config/paths-osx.conf
-fail2ban/tests/databasetestcase.py
-fail2ban/tests/datedetectortestcase.py
-fail2ban/tests/dummyjail.py
-fail2ban/tests/failmanagertestcase.py
-fail2ban/tests/files/action.d/action.py
-fail2ban/tests/files/action.d/action_errors.py
-fail2ban/tests/files/action.d/action_modifyainfo.py
-fail2ban/tests/files/action.d/action_noAction.py
-fail2ban/tests/files/action.d/action_nomethod.py
-fail2ban/tests/files/config/apache-auth/README
+fail2ban/tests/config/paths-debian.conf
+fail2ban/tests/config/filter.d/simple.conf
+fail2ban/tests/config/action.d/brokenaction.conf
+fail2ban/tests/files/config/apache-auth/digest/.htaccess
+fail2ban/tests/files/config/apache-auth/digest/.htpasswd
+fail2ban/tests/files/config/apache-auth/digest_time/.htaccess
+fail2ban/tests/files/config/apache-auth/digest_time/.htpasswd
 fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htaccess
-fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htpasswd
 fail2ban/tests/files/config/apache-auth/basic/authz_owner/cant_get_me.html
+fail2ban/tests/files/config/apache-auth/basic/authz_owner/.htpasswd
 fail2ban/tests/files/config/apache-auth/basic/file/.htaccess
 fail2ban/tests/files/config/apache-auth/basic/file/.htpasswd
 fail2ban/tests/files/config/apache-auth/digest.py
-fail2ban/tests/files/config/apache-auth/digest/.htaccess
-fail2ban/tests/files/config/apache-auth/digest/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest_anon/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_anon/.htpasswd
-fail2ban/tests/files/config/apache-auth/digest_time/.htaccess
-fail2ban/tests/files/config/apache-auth/digest_time/.htpasswd
 fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htaccess
 fail2ban/tests/files/config/apache-auth/digest_wrongrelm/.htpasswd
+fail2ban/tests/files/config/apache-auth/digest_anon/.htaccess
+fail2ban/tests/files/config/apache-auth/digest_anon/.htpasswd
+fail2ban/tests/files/config/apache-auth/README
 fail2ban/tests/files/config/apache-auth/noentry/.htaccess
 fail2ban/tests/files/database_v1.db
+fail2ban/tests/files/ignorecommand.py
 fail2ban/tests/files/filter.d/substition.conf
 fail2ban/tests/files/filter.d/testcase-common.conf
 fail2ban/tests/files/filter.d/testcase01.conf
-fail2ban/tests/files/ignorecommand.py
+fail2ban/tests/files/testcase01.log
+fail2ban/tests/files/testcase02.log
+fail2ban/tests/files/testcase03.log
+fail2ban/tests/files/testcase04.log
+fail2ban/tests/files/testcase-usedns.log
+fail2ban/tests/files/testcase-journal.log
+fail2ban/tests/files/testcase-multiline.log
+fail2ban/tests/files/logs/bsd/syslog-plain.txt
+fail2ban/tests/files/logs/bsd/syslog-v.txt
+fail2ban/tests/files/logs/bsd/syslog-vv.txt
 fail2ban/tests/files/logs/3proxy
 fail2ban/tests/files/logs/apache-auth
 fail2ban/tests/files/logs/apache-badbots
 fail2ban/tests/files/logs/apache-botscripts
-fail2ban/tests/files/logs/apache-botsearch
 fail2ban/tests/files/logs/apache-modsecurity
 fail2ban/tests/files/logs/apache-nohome
 fail2ban/tests/files/logs/apache-noscript
 fail2ban/tests/files/logs/apache-overflows
-fail2ban/tests/files/logs/apache-shellshock
 fail2ban/tests/files/logs/assp
 fail2ban/tests/files/logs/asterisk
-fail2ban/tests/files/logs/bsd/syslog-plain.txt
-fail2ban/tests/files/logs/bsd/syslog-v.txt
-fail2ban/tests/files/logs/bsd/syslog-vv.txt
 fail2ban/tests/files/logs/counter-strike
 fail2ban/tests/files/logs/courier-auth
 fail2ban/tests/files/logs/courier-smtp
 fail2ban/tests/files/logs/cyrus-imap
-fail2ban/tests/files/logs/directadmin
 fail2ban/tests/files/logs/dovecot
 fail2ban/tests/files/logs/dropbear
 fail2ban/tests/files/logs/ejabberd-auth
@@ -128,60 +126,42 @@ fail2ban/tests/files/logs/freeswitch
 fail2ban/tests/files/logs/groupoffice
 fail2ban/tests/files/logs/gssftpd
 fail2ban/tests/files/logs/guacamole
-fail2ban/tests/files/logs/horde
 fail2ban/tests/files/logs/kerio
 fail2ban/tests/files/logs/lighttpd-auth
-fail2ban/tests/files/logs/monit
 fail2ban/tests/files/logs/mysqld-auth
 fail2ban/tests/files/logs/nagios
-fail2ban/tests/files/logs/named-refused
-fail2ban/tests/files/logs/nginx-http-auth
 fail2ban/tests/files/logs/nsd
-fail2ban/tests/files/logs/openwebmail
-fail2ban/tests/files/logs/oracleims
-fail2ban/tests/files/logs/pam-generic
 fail2ban/tests/files/logs/perdition
 fail2ban/tests/files/logs/php-url-fopen
-fail2ban/tests/files/logs/portsentry
-fail2ban/tests/files/logs/postfix
 fail2ban/tests/files/logs/postfix-sasl
+fail2ban/tests/files/logs/named-refused
+fail2ban/tests/files/logs/nginx-http-auth
+fail2ban/tests/files/logs/pam-generic
+fail2ban/tests/files/logs/postfix
 fail2ban/tests/files/logs/proftpd
 fail2ban/tests/files/logs/pure-ftpd
 fail2ban/tests/files/logs/qmail
 fail2ban/tests/files/logs/recidive
 fail2ban/tests/files/logs/roundcube-auth
 fail2ban/tests/files/logs/selinux-ssh
-fail2ban/tests/files/logs/sendmail-auth
-fail2ban/tests/files/logs/sendmail-reject
 fail2ban/tests/files/logs/sendmail-spam
 fail2ban/tests/files/logs/sieve
-fail2ban/tests/files/logs/sogo-auth
-fail2ban/tests/files/logs/solid-pop3d
 fail2ban/tests/files/logs/squid
-fail2ban/tests/files/logs/squirrelmail
-fail2ban/tests/files/logs/sshd
-fail2ban/tests/files/logs/sshd-ddos
 fail2ban/tests/files/logs/stunnel
 fail2ban/tests/files/logs/suhosin
-fail2ban/tests/files/logs/tine20
-fail2ban/tests/files/logs/uwimap-auth
+fail2ban/tests/files/logs/sogo-auth
+fail2ban/tests/files/logs/solid-pop3d
+fail2ban/tests/files/logs/sshd
+fail2ban/tests/files/logs/sshd-ddos
 fail2ban/tests/files/logs/vsftpd
 fail2ban/tests/files/logs/webmin-auth
 fail2ban/tests/files/logs/wuftpd
+fail2ban/tests/files/logs/uwimap-auth
 fail2ban/tests/files/logs/xinetd-fail
-fail2ban/tests/files/testcase-journal.log
-fail2ban/tests/files/testcase-multiline.log
-fail2ban/tests/files/testcase-usedns.log
-fail2ban/tests/files/testcase01.log
-fail2ban/tests/files/testcase02.log
-fail2ban/tests/files/testcase03.log
-fail2ban/tests/files/testcase04.log
-fail2ban/tests/filtertestcase.py
-fail2ban/tests/misctestcase.py
-fail2ban/tests/samplestestcase.py
-fail2ban/tests/servertestcase.py
-fail2ban/tests/sockettestcase.py
-fail2ban/tests/utils.py
+fail2ban/tests/config/jail.conf
+fail2ban/tests/config/fail2ban.conf
+fail2ban/tests/config/filter.d/simple.conf
+fail2ban/tests/config/action.d/brokenaction.conf
 setup.py
 setup.cfg
 fail2ban/__init__.py
@@ -189,136 +169,126 @@ fail2ban/exceptions.py
 fail2ban/helpers.py
 fail2ban/version.py
 fail2ban/protocol.py
+setup.py
+setup.cfg
 kill-server
-config/action.d/apf.conf
-config/action.d/badips.conf
-config/action.d/badips.py
-config/action.d/blocklist_de.conf
-config/action.d/bsd-ipfw.conf
-config/action.d/cloudflare.conf
-config/action.d/complain.conf
-config/action.d/dshield.conf
-config/action.d/dummy.conf
-config/action.d/firewallcmd-ipset.conf
-config/action.d/firewallcmd-new.conf
-config/action.d/hostsdeny.conf
-config/action.d/ipfilter.conf
-config/action.d/ipfw.conf
-config/action.d/iptables-allports.conf
-config/action.d/iptables-common.conf
-config/action.d/iptables-ipset-proto4.conf
-config/action.d/iptables-ipset-proto6-allports.conf
-config/action.d/iptables-ipset-proto6.conf
-config/action.d/iptables-multiport-log.conf
-config/action.d/iptables-multiport.conf
-config/action.d/iptables-new.conf
-config/action.d/iptables-xt_recent-echo.conf
-config/action.d/iptables.conf
-config/action.d/mail-buffered.conf
-config/action.d/mail-whois-lines.conf
-config/action.d/mail-whois.conf
-config/action.d/mail.conf
-config/action.d/mynetwatchman.conf
-config/action.d/osx-afctl.conf
-config/action.d/osx-ipfw.conf
-config/action.d/pf.conf
-config/action.d/route.conf
-config/action.d/sendmail-buffered.conf
-config/action.d/sendmail-common.conf
-config/action.d/sendmail-whois-ipjailmatches.conf
-config/action.d/sendmail-whois-ipmatches.conf
-config/action.d/sendmail-whois-lines.conf
-config/action.d/sendmail-whois-matches.conf
-config/action.d/sendmail-whois.conf
-config/action.d/sendmail.conf
-config/action.d/shorewall.conf
-config/action.d/smtp.py
-config/action.d/symbiosis-blacklist-allports.conf
-config/action.d/ufw.conf
-config/action.d/xarf-login-attack.conf
+config/jail.conf
 config/fail2ban.conf
-config/filter.d/3proxy.conf
+config/filter.d/common.conf
 config/filter.d/apache-auth.conf
 config/filter.d/apache-badbots.conf
 config/filter.d/apache-botsearch.conf
-config/filter.d/apache-common.conf
 config/filter.d/apache-modsecurity.conf
 config/filter.d/apache-nohome.conf
 config/filter.d/apache-noscript.conf
 config/filter.d/apache-overflows.conf
-config/filter.d/apache-shellshock.conf
-config/filter.d/assp.conf
-config/filter.d/asterisk.conf
-config/filter.d/common.conf
+config/filter.d/nginx-http-auth.conf
 config/filter.d/counter-strike.conf
 config/filter.d/courier-auth.conf
 config/filter.d/courier-smtp.conf
 config/filter.d/cyrus-imap.conf
-config/filter.d/directadmin.conf
-config/filter.d/dovecot.conf
-config/filter.d/dropbear.conf
 config/filter.d/ejabberd-auth.conf
-config/filter.d/exim-common.conf
-config/filter.d/exim-spam.conf
 config/filter.d/exim.conf
 config/filter.d/freeswitch.conf
-config/filter.d/groupoffice.conf
 config/filter.d/gssftpd.conf
-config/filter.d/guacamole.conf
-config/filter.d/horde.conf
 config/filter.d/kerio.conf
-config/filter.d/lighttpd-auth.conf
-config/filter.d/monit.conf
-config/filter.d/mysqld-auth.conf
+config/filter.d/horde.conf
+config/filter.d/suhosin.conf
 config/filter.d/nagios.conf
 config/filter.d/named-refused.conf
-config/filter.d/nginx-http-auth.conf
 config/filter.d/nsd.conf
 config/filter.d/openwebmail.conf
-config/filter.d/oracleims.conf
 config/filter.d/pam-generic.conf
-config/filter.d/pam-generic.conf
-config/filter.d/pam-generic.conf
-config/filter.d/perdition.conf
 config/filter.d/php-url-fopen.conf
-config/filter.d/php-url-fopen.conf
-config/filter.d/php-url-fopen.conf
-config/filter.d/portsentry.conf
-config/filter.d/postfix-sasl.conf
 config/filter.d/postfix-sasl.conf
+config/filter.d/pam-generic.conf
+config/filter.d/php-url-fopen.conf
 config/filter.d/postfix-sasl.conf
 config/filter.d/postfix.conf
 config/filter.d/proftpd.conf
 config/filter.d/pure-ftpd.conf
 config/filter.d/qmail.conf
-config/filter.d/recidive.conf
-config/filter.d/roundcube-auth.conf
-config/filter.d/selinux-common.conf
-config/filter.d/selinux-ssh.conf
+config/filter.d/pam-generic.conf
+config/filter.d/php-url-fopen.conf
+config/filter.d/postfix-sasl.conf
 config/filter.d/sendmail-auth.conf
 config/filter.d/sendmail-reject.conf
-config/filter.d/sendmail-spam.conf
 config/filter.d/sieve.conf
-config/filter.d/sogo-auth.conf
 config/filter.d/solid-pop3d.conf
 config/filter.d/squid.conf
-config/filter.d/squirrelmail.conf
-config/filter.d/sshd-ddos.conf
 config/filter.d/sshd.conf
+config/filter.d/sshd-ddos.conf
 config/filter.d/stunnel.conf
-config/filter.d/suhosin.conf
-config/filter.d/tine20.conf
-config/filter.d/uwimap-auth.conf
 config/filter.d/vsftpd.conf
 config/filter.d/webmin-auth.conf
 config/filter.d/wuftpd.conf
 config/filter.d/xinetd-fail.conf
-config/jail.conf
-config/paths-common.conf
-config/paths-debian.conf
-config/paths-fedora.conf
-config/paths-freebsd.conf
-config/paths-osx.conf
+config/filter.d/asterisk.conf
+config/filter.d/dovecot.conf
+config/filter.d/dropbear.conf
+config/filter.d/lighttpd-auth.conf
+config/filter.d/recidive.conf
+config/filter.d/roundcube-auth.conf
+config/filter.d/assp.conf
+config/filter.d/sogo-auth.conf
+config/filter.d/mysqld-auth.conf
+config/filter.d/selinux-common.conf
+config/filter.d/selinux-ssh.conf
+config/filter.d/3proxy.conf
+config/filter.d/apache-common.conf
+config/filter.d/exim-common.conf
+config/filter.d/exim-spam.conf
+config/filter.d/freeswitch.conf
+config/filter.d/groupoffice.conf
+config/filter.d/perdition.conf
+config/filter.d/uwimap-auth.conf
+config/filter.d/courier-auth.conf
+config/filter.d/courier-smtp.conf
+config/filter.d/ejabberd-auth.conf
+config/filter.d/guacamole.conf
+config/filter.d/sendmail-spam.conf
+config/action.d/apf.conf
+config/action.d/blocklist_de.conf
+config/action.d/osx-afctl.conf
+config/action.d/osx-ipfw.conf
+config/action.d/sendmail-common.conf
+config/action.d/badips.conf
+config/action.d/bsd-ipfw.conf
+config/action.d/dummy.conf
+config/action.d/firewallcmd-new.conf
+config/action.d/firewallcmd-ipset.conf
+config/action.d/iptables-ipset-proto6-allports.conf
+config/action.d/iptables-common.conf
+config/action.d/iptables-ipset-proto4.conf
+config/action.d/iptables-ipset-proto6.conf
+config/action.d/iptables-xt_recent-echo.conf
+config/action.d/route.conf
+config/action.d/complain.conf
+config/action.d/dshield.conf
+config/action.d/hostsdeny.conf
+config/action.d/ipfw.conf
+config/action.d/ipfilter.conf
+config/action.d/iptables.conf
+config/action.d/iptables-allports.conf
+config/action.d/iptables-multiport.conf
+config/action.d/iptables-multiport-log.conf
+config/action.d/iptables-new.conf
+config/action.d/mail.conf
+config/action.d/mail-buffered.conf
+config/action.d/mail-whois.conf
+config/action.d/mail-whois-lines.conf
+config/action.d/mynetwatchman.conf
+config/action.d/pf.conf
+config/action.d/sendmail.conf
+config/action.d/sendmail-buffered.conf
+config/action.d/sendmail-whois-ipmatches.conf
+config/action.d/sendmail-whois.conf
+config/action.d/sendmail-whois-lines.conf
+config/action.d/shorewall.conf
+config/action.d/xarf-login-attack.conf
+config/action.d/ufw.conf
+config/fail2ban.conf
+doc/run-rootless.txt
 man/fail2ban-client.1
 man/fail2ban.1
 man/jail.conf.5
@@ -336,8 +306,6 @@ files/solaris-fail2ban.xml
 files/solaris-svc-fail2ban
 files/suse-initd
 files/fail2ban-logrotate
-files/fail2ban.upstart
-files/logwatch/fail2ban
 files/cacti/fail2ban_stats.sh
 files/cacti/cacti_host_template_fail2ban.xml
 files/cacti/README
@@ -1,4 +1,4 @@
-include ChangeLog COPYING DEVELOP FILTERS README.* THANKS TODO CONTRIBUTING* Vagrantfile
+include ChangeLog COPYING DEVELOP FILTERS README.* THANKS TODO
 graft doc
 graft files
 recursive-include config *.conf *.py
@@ -2,7 +2,7 @@
                        / _|__ _(_) |_  ) |__  __ _ _ _  
                       |  _/ _` | | |/ /| '_ \/ _` | ' \ 
                       |_| \__,_|_|_/___|_.__/\__,_|_||_|
-                       v0.9.1                  2014/10/29
+                       v0.9.0                  2014/03/14

 ## Fail2Ban: ban hosts that cause multiple authentication errors

@@ -36,8 +36,8 @@ Optional:

 To install, just do:

-    tar xvfj fail2ban-0.9.1.tar.bz2
-    cd fail2ban-0.9.1
+    tar xvfj fail2ban-0.9.0.tar.bz2
+    cd fail2ban-0.9.0
    python setup.py install

 This will install Fail2Ban into the python library directory. The executable
@@ -47,10 +47,6 @@ Preparation

 * Ensure the MANIFEST is complete

-  ad-hoc bash script to run in a clean clone:
-
-     find -type f | grep -v -e '\.git' -e '/doc/' -e '\.travis' -e MANIFEST | sed -e 's,^\./,,g' | while read f; do grep -ne "^$f\$" MANIFEST >/dev/null || echo "$f" ; done
-
 * Run::

  python setup.py sdist
@@ -61,24 +57,24 @@ Preparation

  * Which indicates that testcases/files/logs/mysqld.log has been moved or is a directory::

-      tar -C /tmp -jxf dist/fail2ban-0.9.1.tar.bz2
+      tar -C /tmp -jxf dist/fail2ban-0.9.0.tar.bz2

 * clean up current direcory::

-    diff -rul --exclude \*.pyc . /tmp/fail2ban-0.9.1/
+    diff -rul --exclude \*.pyc . /tmp/fail2ban-0.9.0/

  * Only differences should be files that you don't want distributed.


 * Ensure the tests work from the tarball::

-    cd /tmp/fail2ban-0.9.1/ && export PYTHONPATH=`pwd` && bin/fail2ban-testcases
+    cd /tmp/fail2ban-0.9.0/ && export PYTHONPATH=`pwd` && bin/fail2ban-testcases

 * Add/finalize the corresponding entry in the ChangeLog

  * To generate a list of committers use e.g.::

-      git shortlog -sn 0.9.1.. | sed -e 's,^[ 0-9\t]*,,g' | tr '\n' '\|' | sed -e 's:|:, :g'
+      git shortlog -sn 0.8.12.. | sed -e 's,^[ 0-9\t]*,,g' | tr '\n' '\|' | sed -e 's:|:, :g'

  * Ensure the top of the ChangeLog has the right version and current date.
  * Ensure the top entry of the ChangeLog has the right version and current date.
@@ -185,7 +181,7 @@ Post Release

 Add the following to the top of the ChangeLog::

-  ver. 0.9.2 (2014/XX/XXX) - wanna-be-released
+  ver. 0.9.1 (2014/XX/XXX) - wanna-be-released
  -----------
  
  - Fixes:
@@ -26,7 +26,6 @@ Christian Rauch
 Christophe Carles
 Christoph Haas
 Christos Psonis
-craneworks
 Cyril Jaquier
 Daniel B. Cid
 Daniel B.
@@ -35,7 +34,6 @@ David Nutter
 Derek Atkins
 Eric Gerbier
 Enrico Labedzki
-Eugene Hopkinson (SlowRiot)
 ftoppi
 François Boulogne
 Frédéric
@@ -83,7 +81,6 @@ Mika (mkl)
 Nick Munger
 onorua
 Paul Marrapese
-Paul Traina
 Noel Butler
 Patrick Börjesson
 Pressy
@@ -1,5 +1,10 @@
 Vagrant.configure("2") do |config|

+  config.vm.define "builder" do |builder|
+    builder.vm.box = "vm144"
+    builder.vm.provision "shell", path: "provision.sh"
+  end
+
    config.vm.define "secure" do |secure|
        secure.vm.box = "ubuntu/trusty64"
        secure.vm.hostname = "secure.dev.fail2ban.org"
@@ -59,53 +59,53 @@ class Fail2banClient:
 		self.__conf["pidfile"] = None

 	def dispVersion(self):
-		print "Fail2Ban v" + version
-		print
-		print "Copyright (c) 2004-2008 Cyril Jaquier, 2008- Fail2Ban Contributors"
-		print "Copyright of modifications held by their respective authors."
-		print "Licensed under the GNU General Public License v2 (GPL)."
-		print
-		print "Written by Cyril Jaquier <cyril.jaquier@fail2ban.org>."
-		print "Many contributions by Yaroslav O. Halchenko <debian@onerussian.com>."
+		print("Fail2Ban v" + version)
+		print()
+		print("Copyright (c) 2004-2008 Cyril Jaquier, 2008- Fail2Ban Contributors")
+		print("Copyright of modifications held by their respective authors.")
+		print("Licensed under the GNU General Public License v2 (GPL).")
+		print()
+		print("Written by Cyril Jaquier <cyril.jaquier@fail2ban.org>.")
+		print("Many contributions by Yaroslav O. Halchenko <debian@onerussian.com>.")

 	def dispUsage(self):
 		""" Prints Fail2Ban command line options and exits
 		"""
-		print "Usage: "+self.__argv[0]+" [OPTIONS] <COMMAND>"
-		print
-		print "Fail2Ban v" + version + " reads log file that contains password failure report"
-		print "and bans the corresponding IP addresses using firewall rules."
-		print
-		print "Options:"
-		print "    -c <DIR>                configuration directory"
-		print "    -s <FILE>               socket path"
-		print "    -p <FILE>               pidfile path"
-		print "    -d                      dump configuration. For debugging"
-		print "    -i                      interactive mode"
-		print "    -v                      increase verbosity"
-		print "    -q                      decrease verbosity"
-		print "    -x                      force execution of the server (remove socket file)"
-		print "    -b                      start server in background (default)"
-		print "    -f                      start server in foreground (note that the client forks once itself)"
-		print "    -h, --help              display this help message"
-		print "    -V, --version           print the version"
-		print
-		print "Command:"
+		print("Usage: "+self.__argv[0]+" [OPTIONS] <COMMAND>")
+		print()
+		print("Fail2Ban v" + version + " reads log file that contains password failure report")
+		print("and bans the corresponding IP addresses using firewall rules.")
+		print()
+		print("Options:")
+		print("    -c <DIR>                configuration directory")
+		print("    -s <FILE>               socket path")
+		print("    -p <FILE>               pidfile path")
+		print("    -d                      dump configuration. For debugging")
+		print("    -i                      interactive mode")
+		print("    -v                      increase verbosity")
+		print("    -q                      decrease verbosity")
+		print("    -x                      force execution of the server (remove socket file)")
+		print("    -b                      start server in background (default)")
+		print("    -f                      start server in foreground (note that the client forks once itself)")
+		print("    -h, --help              display this help message")
+		print("    -V, --version           print the version")
+		print()
+		print("Command:")

 		# Prints the protocol
 		printFormatted()

-		print
-		print "Report bugs to https://github.com/fail2ban/fail2ban/issues"
+		print()
+		print("Report bugs to https://github.com/fail2ban/fail2ban/issues")

 	def dispInteractive(self):
-		print "Fail2Ban v" + version + " reads log file that contains password failure report"
-		print "and bans the corresponding IP addresses using firewall rules."
-		print
+		print("Fail2Ban v" + version + " reads log file that contains password failure report")
+		print("and bans the corresponding IP addresses using firewall rules.")
+		print()

 	def __sigTERMhandler(self, signum, frame):
 		# Print a new line because we probably come from wait
-		print
+		print()
 		logSys.warning("Caught signal %d. Exiting" % signum)
 		sys.exit(-1)

@@ -152,19 +152,19 @@ class Fail2banClient:
 				client = CSocket(self.__conf["socket"])
 				ret = client.send(c)
 				if ret[0] == 0:
-					logSys.debug("OK : " + `ret[1]`)
+					logSys.debug("OK : " + repr(ret[1]))
 					if showRet:
-						print beautifier.beautify(ret[1])
+						print(beautifier.beautify(ret[1]))
 				else:
-					logSys.error("NOK: " + `ret[1].args`)
+					logSys.error("NOK: " + repr(ret[1].args))
 					if showRet:
-						print beautifier.beautifyError(ret[1])
+						print(beautifier.beautifyError(ret[1]))
 					streamRet = False
 			except socket.error:
 				if showRet:
 					logSys.error("Unable to contact server. Is it running?")
 				return False
-			except Exception, e:
+			except Exception as e:
 				if showRet:
 					logSys.error(e)
 				return False
@@ -383,7 +383,7 @@ class Fail2banClient:
 					readline.parse_and_bind("tab: complete")
 					self.dispInteractive()
 					while True:
-						cmd = raw_input(self.PROMPT)
+						cmd = input(self.PROMPT)
 						if cmd == "exit" or cmd == "quit":
 							# Exit
 							return True
@@ -392,10 +392,10 @@ class Fail2banClient:
 						elif not cmd == "":
 							try:
 								self.__processCommand(shlex.split(cmd))
-							except Exception, e:
+							except Exception as e:
 								logSys.error(e)
 			except (EOFError, KeyboardInterrupt):
-				print
+				print()
 				return True
 		# Single command mode
 		else:
@@ -409,21 +409,21 @@ class Fail2banClient:
 		# TODO: get away from stew of return codes and exception
 		# handling -- handle via exceptions
 		try:
-			self.__configurator.Reload()
 			self.__configurator.readAll()
 			ret = self.__configurator.getOptions(jail)
 			self.__configurator.convertToProtocol()
 			self.__stream = self.__configurator.getConfigStream()
-		except Exception, e:
+		except Exception as e:
 			logSys.error("Failed during configuration: %s" % e)
 			ret = False
 		return ret

-	@staticmethod
+	#@staticmethod
 	def dumpConfig(cmd):
 		for c in cmd:
-			print c
+			print(c)
 		return True
+	dumpConfig = staticmethod(dumpConfig)


 class ServerExecutionException(Exception):
@@ -29,10 +29,10 @@ __author__ = "Fail2Ban Developers"
 __copyright__ = "Copyright (c) 2004-2008 Cyril Jaquier, 2012-2014 Yaroslav Halchenko"
 __license__ = "GPL"

-import getopt, sys, time, logging, os, locale, shlex, time, urllib
+import getopt, sys, time, logging, os, locale, shlex, time, urllib.request, urllib.parse, urllib.error
 from optparse import OptionParser, Option

-from ConfigParser import NoOptionError, NoSectionError, MissingSectionHeaderError
+from configparser import NoOptionError, NoSectionError, MissingSectionHeaderError

 try:
 	from systemd import journal
@@ -50,7 +50,7 @@ from fail2ban.helpers import FormatterWithTraceBack, getLogger
 logSys = getLogger("fail2ban")

 def debuggexURL(sample, regex):
-	q = urllib.urlencode({ 're': regex.replace('<HOST>', '(?&.ipv4)'),
+	q = urllib.parse.urlencode({ 're': regex.replace('<HOST>', '(?&.ipv4)'),
 							'str': sample,
 							'flavor': 'python' })
 	return 'http://www.debuggex.com/?' + q
@@ -69,7 +69,7 @@ def pprint_list(l, header=None):
 		s = "|- %s\n" % header
 	else:
 		s = ''
-	print s + "|  " + "\n|  ".join(l) + '\n`-'
+	print(s + "|  " + "\n|  ".join(l) + '\n`-')

 def file_lines_gen(hdlr):
 	for line in hdlr:
@@ -244,14 +244,14 @@ class Fail2banRegex(object):
 			self._filter.setDatePattern(pattern)
 			self._datepattern_set = True
 			if pattern is not None:
-				print "Use      datepattern : %s" % (
-					self._filter.getDatePattern()[1], )
+				print("Use      datepattern : %s" % (
+					self._filter.getDatePattern()[1], ))

 	def setMaxLines(self, v):
 		if not self._maxlines_set:
 			self._filter.setMaxLines(int(v))
 			self._maxlines_set = True
-			print "Use         maxlines : %d" % self._filter.getMaxLines()
+			print("Use         maxlines : %d" % self._filter.getMaxLines())

 	def setJournalMatch(self, v):
 		if self._journalmatch is None:
@@ -261,7 +261,7 @@ class Fail2banRegex(object):
 		assert(regextype in ('fail', 'ignore'))
 		regex = regextype + 'regex'
 		if os.path.isfile(value):
-			print "Use %11s file : %s" % (regex, value)
+			print("Use %11s file : %s" % (regex, value))
 			reader = FilterReader(value, 'fail2ban-regex-jail', {})
 			reader.setBaseDir(None)

@@ -270,9 +270,7 @@ class Fail2banRegex(object):
 				readercommands = reader.convert()
 				regex_values = [
 					RegexStat(m[3])
-					for m in filter(
-						lambda x: x[0] == 'set' and x[2] == "add%sregex" % regextype,
-						readercommands)]
+					for m in [x for x in readercommands if x[0] == 'set' and x[2] == "add%sregex" % regextype]]
 				# Read out and set possible value of maxlines
 				for command in readercommands:
 					if command[2] == "maxlines":
@@ -280,8 +278,8 @@ class Fail2banRegex(object):
 						try:
 							self.setMaxLines(maxlines)
 						except ValueError:
-							print "ERROR: Invalid value for maxlines (%(maxlines)r) " \
-								  "read from %(value)s" % locals()
+							print("ERROR: Invalid value for maxlines (%(maxlines)r) " \
+								  "read from %(value)s" % locals())
 							return False
 					elif command[2] == 'addjournalmatch':
 						journalmatch = command[3]
@@ -290,10 +288,10 @@ class Fail2banRegex(object):
 						datepattern = command[3]
 						self.setDatePattern(datepattern)
 			else:
-				print "ERROR: failed to read %s" % value
+				print("ERROR: failed to read %s" % value)
 				return False
 		else:
-			print "Use %11s line : %s" % (regex, shortstr(value))
+			print("Use %11s line : %s" % (regex, shortstr(value)))
 			regex_values = [RegexStat(value)]

 		setattr(self, "_" + regex, regex_values)
@@ -310,8 +308,8 @@ class Fail2banRegex(object):
 			if ret is not None:
 				found = True
 				regex = self._ignoreregex[ret].inc()
-		except RegexException, e:
-			print e
+		except RegexException as e:
+			print(e)
 			return False
 		return found

@@ -327,11 +325,11 @@ class Fail2banRegex(object):
 				regex = self._failregex[match[0]]
 				regex.inc()
 				regex.appendIP(match)
-		except RegexException, e:
-			print e
+		except RegexException as e:
+			print(e)
 			return False
 		except IndexError:
-			print "Sorry, but no <HOST> found in regex"
+			print("Sorry, but no <HOST> found in regex")
 			return False
 		for bufLine in orgLineBuffer[int(fullBuffer):]:
 			if bufLine not in self._filter._Filter__lineBuffer:
@@ -405,21 +403,21 @@ class Fail2banRegex(object):
 					ans = [[]]
 					for arg in [l, regexlist]:
 						ans = [ x + [y] for x in ans for y in arg ]
-					b = map(lambda a: a[0] +  ' | ' + a[1].getFailRegex() + ' |  ' + debuggexURL(a[0], a[1].getFailRegex()), ans)
+					b = [a[0] +  ' | ' + a[1].getFailRegex() + ' |  ' + debuggexURL(a[0], a[1].getFailRegex()) for a in ans]
 					pprint_list([x.rstrip() for x in b], header)
 				else:
-					print "%s too many to print.  Use --print-all-%s " \
-						  "to print all %d lines" % (header, ltype, lines)
+					print("%s too many to print.  Use --print-all-%s " \
+						  "to print all %d lines" % (header, ltype, lines))
 			elif lines < self._maxlines or getattr(self, '_print_all_' + ltype):
 				pprint_list([x.rstrip() for x in l], header)
 			else:
-				print "%s too many to print.  Use --print-all-%s " \
-					  "to print all %d lines" % (header, ltype, lines)
+				print("%s too many to print.  Use --print-all-%s " \
+					  "to print all %d lines" % (header, ltype, lines))

 	def printStats(self):
-		print
-		print "Results"
-		print "======="
+		print()
+		print("Results")
+		print("=======")

 		def print_failregexes(title, failregexes):
 			# Print title
@@ -440,7 +438,7 @@ class Fail2banRegex(object):
 								timeString,
 								ip[-1] and " (multiple regex matched)" or ""))

-			print "\n%s: %d total" % (title, total)
+			print("\n%s: %d total" % (title, total))
 			pprint_list(out, " #) [# of hits] regular expression")
 			return total

@@ -450,7 +448,7 @@ class Fail2banRegex(object):


 		if self._filter.dateDetector is not None:
-			print "\nDate template hits:"
+			print("\nDate template hits:")
 			out = []
 			for template in self._filter.dateDetector.templates:
 				if self._verbose or template.hits:
@@ -458,10 +456,10 @@ class Fail2banRegex(object):
 						template.hits, template.name))
 			pprint_list(out, "[# of hits] date format")

-		print "\nLines: %s" % self._line_stats,
+		print("\nLines: %s" % self._line_stats, end=' ')
 		if self._time_elapsed is not None:
-			print "[processed in %.2f sec]" % self._time_elapsed,
-		print
+			print("[processed in %.2f sec]" % self._time_elapsed, end=' ')
+		print()

 		if self._print_all_matched:
 			self.printLines('matched')
@@ -486,10 +484,10 @@ if __name__ == "__main__":
 		parser.print_help()
 		sys.exit(-1)

-	print
-	print "Running tests"
-	print "============="
-	print
+	print()
+	print("Running tests")
+	print("=============")
+	print()

 	fail2banRegex = Fail2banRegex(opts)

@@ -538,15 +536,15 @@ if __name__ == "__main__":
 	if os.path.isfile(cmd_log):
 		try:
 			hdlr = open(cmd_log, 'rb')
-			print "Use         log file : %s" % cmd_log
-			print "Use         encoding : %s" % fail2banRegex.encoding
+			print("Use         log file : %s" % cmd_log)
+			print("Use         encoding : %s" % fail2banRegex.encoding)
 			test_lines = file_lines_gen(hdlr)
-		except IOError, e:
-			print e
+		except IOError as e:
+			print(e)
 			sys.exit(-1)
 	elif cmd_log == "systemd-journal":
 		if not journal:
-			print "Error: systemd library not found. Exiting..."
+			print("Error: systemd library not found. Exiting...")
 			sys.exit(-1)
 		myjournal = journal.Reader(converters={'__CURSOR': lambda x: x})
 		journalmatch = fail2banRegex._journalmatch
@@ -559,14 +557,14 @@ if __name__ == "__main__":
 					else:
 						myjournal.add_match(element)
 			except ValueError:
-				print "Error: Invalid journalmatch: %s" % shortstr(" ".join(journalmatch))
+				print("Error: Invalid journalmatch: %s" % shortstr(" ".join(journalmatch)))
 				sys.exit(-1)
-		print "Use    journal match : %s" % " ".join(journalmatch)
+		print("Use    journal match : %s" % " ".join(journalmatch))
 		test_lines = journal_lines_gen(myjournal)
 	else:
-		print "Use      single line : %s" % shortstr(cmd_log)
+		print("Use      single line : %s" % shortstr(cmd_log))
 		test_lines = [ cmd_log ]
-	print
+	print()

 	fail2banRegex.process(test_lines)

@@ -51,37 +51,37 @@ class Fail2banServer:
 		self.__conf["pidfile"] = "/var/run/fail2ban/fail2ban.pid"

 	def dispVersion(self):
-		print "Fail2Ban v" + version
-		print
-		print "Copyright (c) 2004-2008 Cyril Jaquier, 2008- Fail2Ban Contributors"
-		print "Copyright of modifications held by their respective authors."
-		print "Licensed under the GNU General Public License v2 (GPL)."
-		print
-		print "Written by Cyril Jaquier <cyril.jaquier@fail2ban.org>."
-		print "Many contributions by Yaroslav O. Halchenko <debian@onerussian.com>."
+		print("Fail2Ban v" + version)
+		print()
+		print("Copyright (c) 2004-2008 Cyril Jaquier, 2008- Fail2Ban Contributors")
+		print("Copyright of modifications held by their respective authors.")
+		print("Licensed under the GNU General Public License v2 (GPL).")
+		print()
+		print("Written by Cyril Jaquier <cyril.jaquier@fail2ban.org>.")
+		print("Many contributions by Yaroslav O. Halchenko <debian@onerussian.com>.")

 	def dispUsage(self):
 		""" Prints Fail2Ban command line options and exits
 		"""
-		print "Usage: "+self.__argv[0]+" [OPTIONS]"
-		print
-		print "Fail2Ban v" + version + " reads log file that contains password failure report"
-		print "and bans the corresponding IP addresses using firewall rules."
-		print
-		print "Only use this command for debugging purpose. Start the server with"
-		print "fail2ban-client instead. The default behaviour is to start the server"
-		print "in background."
-		print
-		print "Options:"
-		print "    -b                   start in background"
-		print "    -f                   start in foreground"
-		print "    -s <FILE>            socket path"
-		print "    -p <FILE>            pidfile path"
-		print "    -x                   force execution of the server (remove socket file)"
-		print "    -h, --help           display this help message"
-		print "    -V, --version        print the version"
-		print
-		print "Report bugs to https://github.com/fail2ban/fail2ban/issues"
+		print("Usage: "+self.__argv[0]+" [OPTIONS]")
+		print()
+		print("Fail2Ban v" + version + " reads log file that contains password failure report")
+		print("and bans the corresponding IP addresses using firewall rules.")
+		print()
+		print("Only use this command for debugging purpose. Start the server with")
+		print("fail2ban-client instead. The default behaviour is to start the server")
+		print("in background.")
+		print()
+		print("Options:")
+		print("    -b                   start in background")
+		print("    -f                   start in foreground")
+		print("    -s <FILE>            socket path")
+		print("    -p <FILE>            pidfile path")
+		print("    -x                   force execution of the server (remove socket file)")
+		print("    -h, --help           display this help message")
+		print("    -V, --version        print the version")
+		print()
+		print("Report bugs to https://github.com/fail2ban/fail2ban/issues")

 	def __getCmdLineOptions(self, optList):
 		""" Gets the command line options
@@ -125,7 +125,7 @@ class Fail2banServer:
 								self.__conf["pidfile"],
 								self.__conf["force"])
 			return True
-		except Exception, e:
+		except Exception as e:
 			logSys.exception(e)
 			self.__server.quit()
 			return False
@@ -114,8 +114,8 @@ logSys.addHandler(stdout)
 # Let know the version
 #
 if not opts.log_level or opts.log_level != 'critical': # pragma: no cover
-	print("Fail2ban %s test suite. Python %s. Please wait..." \
-	    % (version, str(sys.version).replace('\n', '')))
+	print(("Fail2ban %s test suite. Python %s. Please wait..." \
+	    % (version, str(sys.version).replace('\n', ''))))

 tests = gatherTests(regexps, opts.no_network)
 #
@@ -10,7 +10,7 @@ before = apache-common.conf
 [Definition]


-failregex = ^%(_apache_error_client)s (AH(01797|01630): )?client denied by server configuration: (uri )?\S*(, referer: \S+)?\s*$
+failregex = ^%(_apache_error_client)s (AH01797: )?client denied by server configuration: (uri )?\S*(, referer: \S+)?\s*$
            ^%(_apache_error_client)s (AH01617: )?user .*? authentication failure for "\S*": Password Mismatch(, referer: \S+)?$
            ^%(_apache_error_client)s (AH01618: )?user .*? not found(: )?\S*(, referer: \S+)?\s*$
            ^%(_apache_error_client)s (AH01614: )?client used wrong authentication scheme: \S*(, referer: \S+)?\s*$
@@ -1,26 +0,0 @@
-# Fail2Ban filter to block web requests containing custom headers attempting to exploit the shellshock bug
-#
-#
-
-[INCLUDES]
-
-# overwrite with apache-common.local if _apache_error_client is incorrect.
-before = apache-common.conf
-
-[Definition]
-
-failregex = ^%(_apache_error_client)s (AH01215: )?/bin/(ba)?sh: warning: HTTP_.*?: ignoring function definition attempt(, referer: \S+)?\s*$
-            ^%(_apache_error_client)s (AH01215: )?/bin/(ba)?sh: error importing function definition for `HTTP_.*?'(, referer: \S+)?\s*$
-
-ignoreregex = 
-
-
-# DEV Notes:
-#
-# https://wiki.apache.org/httpd/ListOfErrors for apache error IDs
-#
-# example log lines: 
-# [Thu Sep 25 09:27:18.813902 2014] [cgi:error] [pid 16860] [client 89.207.132.76:59635] AH01215: /bin/bash: warning: HTTP_TEST: ignoring function definition attempt
-# [Thu Sep 25 09:29:56.141832 2014] [cgi:error] [pid 16864] [client 162.247.73.206:41273] AH01215: /bin/bash: error importing function definition for `HTTP_TEST'
-#
-# Author: Eugene Hopkinson (riot@riot.so)
@@ -1,10 +0,0 @@
-# Fail2Ban filter for failure attempts in Counter Strike-1.6
-#
-#
-
-[Definition]
-
-failregex = \/<HOST> Port\: [0-9]+ (TCP|UDP) Blocked$
-
-# Author: Pacop <pacoparu@gmail.com>
-
@@ -7,12 +7,10 @@ before = common.conf

 [Definition]

-_daemon = postfix/(submission/)?smtp(d|s)
+_daemon = postfix/smtpd

 failregex = ^%(__prefix_line)swarning: [-._\w]+\[<HOST>\]: SASL (?:LOGIN|PLAIN|(?:CRAM|DIGEST)-MD5) authentication failed(: [ A-Za-z0-9+/]*={0,2})?\s*$

-ignoreregex = 
-
 [Init]

 journalmatch = _SYSTEMD_UNIT=postfix.service
@@ -10,7 +10,7 @@ before = common.conf

 [Definition]

-_daemon = postfix/(submission/)?smtp(d|s)
+_daemon = postfix/smtpd

 failregex = ^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 554 5\.7\.1 .*$
            ^%(__prefix_line)sNOQUEUE: reject: RCPT from \S+\[<HOST>\]: 450 4\.7\.1 : Helo command rejected: Host not found; from=<> to=<> proto=ESMTP helo= *$
@@ -283,11 +283,6 @@ port     = http,https
 logpath  = %(apache_error_log)s
 maxretry = 2

-[apache-shellshock]
-
-port    = http,https
-logpath = $(apache_error_log)s
-maxretry = 1

 [nginx-http-auth]

@@ -719,8 +714,3 @@ banaction = iptables-allports
 enabled = false
 logpath = /var/log/directadmin/login.log
 port = 2222
-
-[portsentry]
-enabled  = false
-logpath  = /var/lib/portsentry/portsentry.history
-maxretry = 1
@@ -1,25 +1,12 @@
-fail2ban (0.9.1-1) unstable; urgency=medium
+fail2ban (0.9.X-python3) UNRELEASED; urgency=medium

-  * To become fresh upstream release (Closes: #742976)
-    - 0.9 series is quite a big leap in development, especially since 0.8.6
-      which made it to previous Debian stable wheezy.  Please consult upstream
-      ChangeLog about changes
-  * debian/control
-    - boost policy to 3.9.6
+  [ Vid Luther ]
+  * python3 for everything? .. I hope.  

- -- Yaroslav Halchenko <debian@onerussian.com>  Mon, 27 Oct 2014 21:52:56 -0400
+  [ vagrant ]
+  * warning? 

-fail2ban (0.9.0+git252-g47441d1-1) experimental; urgency=medium
-
-  [ Yaroslav Halchenko ]
-  * New upstream snapshot from 0.9.0a2-814-g98dc084.
-
-  [ Daniel Schaal ]
-  * debian/{control,rules}
-    - switching to python3 as the interpreter for Fail2Ban so we could use
-      python3-systemd which is N/A for Python2 any longer
-
- -- Yaroslav Halchenko <debian@onerussian.com>  Sun, 12 Oct 2014 16:45:36 -0400
+ -- vagrant <vagrant@vagrant.vm>  Sat, 13 Sep 2014 03:52:55 +0000

 fail2ban (0.9.0+git48-gabcab00-1) experimental; urgency=medium

@@ -2,18 +2,18 @@ Source: fail2ban
 Section: net
 Priority: optional
 Maintainer: Yaroslav Halchenko <debian@onerussian.com>
-Build-Depends: debhelper (>= 9), python3, python3-pyinotify, dh-systemd
+Build-Depends: debhelper (>= 9), python3 (>= 3.0~), python3-pyinotify, dh-systemd
 Homepage: http://www.fail2ban.org
 Vcs-Git: git://github.com/fail2ban/fail2ban.git
 Vcs-Browser: http://github.com/fail2ban/fail2ban
-Standards-Version: 3.9.6
+Standards-Version: 3.9.4


 Package: fail2ban
 Architecture: all
 Depends: ${python3:Depends}, ${misc:Depends}, lsb-base (>=2.0-7)
 Recommends: iptables, whois, python3-pyinotify
-Suggests: mailx, system-log-daemon, python3-systemd
+Suggests: python-gamin, mailx, system-log-daemon, python3-systemd
 Description: ban hosts that cause multiple authentication errors
 Fail2ban monitors log files (e.g. /var/log/auth.log,
 /var/log/apache/access.log) and temporarily or persistently bans
@@ -27,4 +27,3 @@ Description: ban hosts that cause multiple authentication errors
 easily extended for monitoring any other text file.  All filters and
 actions are given in the config files, thus fail2ban can be adopted
 to be used with a variety of files and firewalls.
-
@@ -0,0 +1,46 @@
+From: Yaroslav Halchenko <debian@onerussian.com>
+Date: Thu, 6 Dec 2012 12:50:12 -0500
+Subject: [PATCH] Patch for elderly Debian/Ubuntu (e.g. 10.04) releases without dh_python2
+
+Use again pycentral etc
+
+crafted post 0.8.8-1 release when a user complained about inability to upgrade
+
+---
+ debian/control |  2 ++
+ debian/rules   | 12 +++++-------
+ 2 files changed, 7 insertions(+), 7 deletions(-)
+
+--- a/debian/control
+++ b/debian/control
+@@ -3,6 +3,8 @@ Section: net
+ Priority: optional
+ Maintainer: Yaroslav Halchenko <debian@onerussian.com>
+ Build-Depends: debhelper (>= 5.0.37.2), python (>= 2.5.4-1~), python-pyinotify
+Build-Depends-Indep: python-central (>= 0.5.6)
+XS-Python-Version: current, >= 2.4
+ Homepage: http://www.fail2ban.org
+ Vcs-Git: git://github.com/fail2ban/fail2ban.git
+ Vcs-Browser: http://github.com/fail2ban/fail2ban
+--- a/debian/rules
+++ b/debian/rules
+@@ -72,14 +72,12 @@ binary-indep: install
+ 	dh_installdocs
+ 	dh_installexamples config/jail.conf files/ipmasq-*
+ 	dh_installlogrotate
+-	dh_python2 /usr/share/fail2ban
+	dh_pycentral
+ 	dh_installinit -- defaults 99
+-
+-	# perform swap of order of calls to init and pycentral (or even
+-	# bleedingly new dh_python2) in prerm to close #422655 --
+-	# python-cleanup section is cut and placed at the end of the file
+-	# since .init script would trigger their compilation again
+-	sed -i -e '/^#.*ed by dh_python2/,/# End auto/{H;d};$$G' \
+	# perform swap of order of calls to init and pycentral in prerm
+	# to close #422655 -- pycentral section is cut and placed at
+	# the end of the file
+	sed -i -e '/^#.*ed by dh_pycentral/,/# End auto/{H;d};$$G' \
+ 		debian/fail2ban.prerm.debhelper
+ 
+ 	dh_installman man/*.[15]
@@ -1 +0,0 @@
-neurodebian_use_python2
@@ -1,51 +0,0 @@
--- a/debian/control
-+++ b/debian/control
-@@ -2,7 +2,7 @@ Source: fail2ban
- Section: net
- Priority: optional
- Maintainer: Yaroslav Halchenko <debian@onerussian.com>
-Build-Depends: debhelper (>= 9), python3, python3-pyinotify, dh-systemd
-+Build-Depends: debhelper (>= 9), python (>= 2.6.6-3~), python-pyinotify, dh-python
- Homepage: http://www.fail2ban.org
- Vcs-Git: git://github.com/fail2ban/fail2ban.git
- Vcs-Browser: http://github.com/fail2ban/fail2ban
-@@ -12,8 +12,8 @@ Standards-Version: 3.9.6
- Package: fail2ban
- Architecture: all
- Depends: ${python3:Depends}, ${misc:Depends}, lsb-base (>=2.0-7)
-Recommends: iptables, whois, python3-pyinotify
-Suggests: mailx, system-log-daemon, python3-systemd
-+Recommends: iptables, whois, python-pyinotify
-+Suggests: mailx, system-log-daemon, python-systemd
- Description: ban hosts that cause multiple authentication errors
-  Fail2ban monitors log files (e.g. /var/log/auth.log,
-  /var/log/apache/access.log) and temporarily or persistently bans
--- a/debian/rules
-+++ b/debian/rules
-@@ -9,13 +9,13 @@
- # Uncomment this to turn on verbose mode.
- #export DH_VERBOSE=1
- 
-export PYBUILD_DISABLE_python2=1
-+export PYBUILD_DISABLE_python3=1
- 
- %:
-	dh $@ --with python3,systemd --buildsystem pybuild
-+	dh $@ --with python2 --buildsystem pybuild
- 
- DESTDIR=$(CURDIR)/debian/fail2ban
-PYVERSION=$(shell py3versions -dv)
-+PYVERSION=$(shell pyversions -dv)
- 
- override_dh_clean:
- 	rm -rf fail2ban.egg-info
-@@ -30,7 +30,8 @@ override_dh_install:
- 	: # Install bash completion
- 	install -d $(DESTDIR)/etc/bash_completion.d
- 	install -m 644 files/bash-completion $(DESTDIR)/etc/bash_completion.d/fail2ban
-	: # Install systemd files
-+	: # Install systemd files, even in backport version just in case even though
-+	: # other systemd preparation activities are not carried out
- 	install -d $(DESTDIR)/lib/systemd/system
- 	install -d $(DESTDIR)/usr/lib/tmpfiles.d
- 	install -m 644 files/fail2ban.service $(DESTDIR)/lib/systemd/system
@@ -1 +0,0 @@
-neurodebian_use_python2
@@ -1 +1,2 @@
 deb_manpages_reportbug
+convert-to-python3.patch
@@ -1 +0,0 @@
-neurodebian_use_python2
@@ -1 +0,0 @@
-neurodebian_use_python2
@@ -1 +0,0 @@
-neurodebian_use_python2
@@ -9,13 +9,10 @@
 # Uncomment this to turn on verbose mode.
 #export DH_VERBOSE=1

-export PYBUILD_DISABLE_python2=1
-
 %:
 	dh $@ --with python3,systemd --buildsystem pybuild

 DESTDIR=$(CURDIR)/debian/fail2ban
-PYVERSION=$(shell py3versions -dv)

 override_dh_clean:
 	rm -rf fail2ban.egg-info
@@ -42,7 +39,8 @@ override_dh_install:

 override_dh_auto_test:
 ifeq (,$(filter nocheck,$(DEB_BUILD_OPTIONS)))
-	cd build && FAIL2BAN_CONFIG_DIR="$(CURDIR)/config" PYTHONPATH="$(CURDIR)/.pybuild/pythonX.Y_$(PYVERSION)/build/" scripts-*/fail2ban-testcases --no-network
+	cd build && PYTHONPATH=../.pybuild/pythonX.Y_3.4/build/ scripts-*/fail2ban-testcases --no-network
+
 endif

 override_dh_installexamples:
@@ -26,7 +26,7 @@ __license__ = "GPL"

 import os

-from .configreader import DefinitionInitConfigReader
+from .configreader import ConfigReader, DefinitionInitConfigReader
 from ..helpers import getLogger

 # Gets the instance of the logger.
@@ -47,19 +47,15 @@ class ActionReader(DefinitionInitConfigReader):
 		DefinitionInitConfigReader.__init__(
 			self, file_, jailName, initOpts, **kwargs)

-	def setFile(self, fileName):
-		self.__file = fileName
-		DefinitionInitConfigReader.setFile(self, os.path.join("action.d", fileName))
-	
-	def getFile(self):
-		return self.__file
-
 	def setName(self, name):
 		self._name = name

 	def getName(self):
 		return self._name

+	def read(self):
+		return ConfigReader.read(self, os.path.join("action.d", self._file))
+
 	def convert(self):
 		head = ["set", self._jailName]
 		stream = list()
@@ -45,7 +45,7 @@ class Beautifier:
 		return self.__inputCmd
 		
 	def beautify(self, response):
-		logSys.debug("Beautify " + `response` + " with " + `self.__inputCmd`)
+		logSys.debug("Beautify " + repr(response) + " with " + repr(self.__inputCmd))
 		inC = self.__inputCmd
 		msg = response
 		try:
@@ -99,7 +99,7 @@ class Beautifier:
 				elif response == 4:
 					msg = msg + "DEBUG"
 				else:
-					msg = msg + `response`
+					msg = msg + repr(response)
 			elif inC[1] == "dbfile":
 				if response is None:
 					msg = "Database currently disabled"
@@ -180,13 +180,13 @@ class Beautifier:
 					msg += ", ".join(response)
 		except Exception:
 			logSys.warning("Beautifier error. Please report the error")
-			logSys.error("Beautify " + `response` + " with " + `self.__inputCmd` +
+			logSys.error("Beautify " + repr(response) + " with " + repr(self.__inputCmd) +
 						 " failed")
-			msg = msg + `response`
+			msg = msg + repr(response)
 		return msg

 	def beautifyError(self, response):
-		logSys.debug("Beautify (error) " + `response` + " with " + `self.__inputCmd`)
+		logSys.debug("Beautify (error) " + repr(response) + " with " + repr(self.__inputCmd))
 		msg = response
 		if isinstance(response, UnknownJailException):
 			msg = "Sorry but the jail '" + response.args[0] + "' does not exist"
@@ -58,11 +58,10 @@ if sys.version_info >= (3,2): # pragma: no cover
 				parser, option, accum, rest, section, map, depth)

 else: # pragma: no cover
-	from ConfigParser import SafeConfigParser
+	from configparser import SafeConfigParser

 # Gets the instance of the logger.
 logSys = getLogger(__name__)
-logLevel = 7

 __all__ = ['SafeConfigParserWithIncludes']

@@ -99,74 +98,31 @@ after = 1.conf

 	if sys.version_info >= (3,2):
 		# overload constructor only for fancy new Python3's
-		def __init__(self, share_config=None, *args, **kwargs):
+		def __init__(self, *args, **kwargs):
 			kwargs = kwargs.copy()
 			kwargs['interpolation'] = BasicInterpolationWithName()
 			kwargs['inline_comment_prefixes'] = ";"
 			super(SafeConfigParserWithIncludes, self).__init__(
 				*args, **kwargs)
-			self._cfg_share = share_config

-	else:
-		def __init__(self, share_config=None, *args, **kwargs):
-			SafeConfigParser.__init__(self, *args, **kwargs)
-			self._cfg_share = share_config
-
-	@property
-	def share_config(self):
-		return self._cfg_share
-
-	def _getSharedSCPWI(self, filename):
-		SCPWI = SafeConfigParserWithIncludes
-		# read single one, add to return list, use sharing if possible:
-		if self._cfg_share:
-			# cache/share each file as include (ex: filter.d/common could be included in each filter config):
-			hashv = 'inc:'+(filename if not isinstance(filename, list) else '\x01'.join(filename))
-			cfg, i = self._cfg_share.get(hashv, (None, None))
-			if cfg is None:
-				cfg = SCPWI(share_config=self._cfg_share)
-				i = cfg.read(filename, get_includes=False)
-				self._cfg_share[hashv] = (cfg, i)
-			elif logSys.getEffectiveLevel() <= logLevel:
-				logSys.log(logLevel, "    Shared file: %s", filename)
-		else:
-			# don't have sharing:
-			cfg = SCPWI()
-			i = cfg.read(filename, get_includes=False)
-		return (cfg, i)
-
-	def _getIncludes(self, filenames, seen=[]):
-		if not isinstance(filenames, list):
-			filenames = [ filenames ]
-		# retrieve or cache include paths:
-		if self._cfg_share:
-			# cache/share include list:
-			hashv = 'inc-path:'+('\x01'.join(filenames))
-			fileNamesFull = self._cfg_share.get(hashv)
-			if fileNamesFull is None:
-				fileNamesFull = []
-				for filename in filenames:
-					fileNamesFull += self.__getIncludesUncached(filename, seen)
-				self._cfg_share[hashv] = fileNamesFull
-			return fileNamesFull
-		# don't have sharing:
-		fileNamesFull = []
-		for filename in filenames:
-			fileNamesFull += self.__getIncludesUncached(filename, seen)
-		return fileNamesFull
-
-	def __getIncludesUncached(self, resource, seen=[]):
+	#@staticmethod
+	def getIncludes(resource, seen = []):
 		"""
 		Given 1 config resource returns list of included files
 		(recursively) with the original one as well
 		Simple loops are taken care about
 		"""
+		
+		# Use a short class name ;)
 		SCPWI = SafeConfigParserWithIncludes
+		
+		parser = SafeConfigParser()
 		try:
-			parser, i = self._getSharedSCPWI(resource)
-			if not i:
-				return []
-		except UnicodeDecodeError, e:
+			if sys.version_info >= (3,2): # pragma: no cover
+				parser.read(resource, encoding='utf-8')
+			else:
+				parser.read(resource)
+		except UnicodeDecodeError as e:
 			logSys.error("Error decoding config file '%s': %s" % (resource, e))
 			return []
 		
@@ -185,60 +141,22 @@ after = 1.conf
 						if r in seen:
 							continue
 						s = seen + [resource]
-						option_list += self._getIncludes(r, s)
+						option_list += SCPWI.getIncludes(r, s)
 		# combine lists
 		return newFiles[0][1] + [resource] + newFiles[1][1]
+		#print "Includes list for " + resource + " is " + `resources`
+	getIncludes = staticmethod(getIncludes)

-	def get_defaults(self):
-		return self._defaults

-	def get_sections(self):
-		return self._sections
-
-	def read(self, filenames, get_includes=True):
+	def read(self, filenames):
+		fileNamesFull = []
 		if not isinstance(filenames, list):
 			filenames = [ filenames ]
-		# retrieve (and cache) includes:
-		fileNamesFull = []
-		if get_includes:
-			fileNamesFull += self._getIncludes(filenames)
-		else:
-			fileNamesFull = filenames
-
-		if not fileNamesFull:
-			return []
-
-		logSys.info("  Loading files: %s", fileNamesFull)
-
-		if get_includes or len(fileNamesFull) > 1:
-			# read multiple configs:
-			ret = []
-			alld = self.get_defaults()
-			alls = self.get_sections()
-			for filename in fileNamesFull:
-				# read single one, add to return list, use sharing if possible:
-				cfg, i = self._getSharedSCPWI(filename)
-				if i:
-					ret += i
-					# merge defaults and all sections to self:
-					alld.update(cfg.get_defaults())
-					for n, s in cfg.get_sections().iteritems():
-						if isinstance(s, dict):
-							s2 = alls.get(n)
-							if isinstance(s2, dict):
-								s2.update(s)
-							else:
-								alls[n] = s.copy()
-						else:
-							alls[n] = s
-
-			return ret
-
-		# read one config :
-		if logSys.getEffectiveLevel() <= logLevel:
-			logSys.log(logLevel, "    Reading file: %s", fileNamesFull[0])
-		# read file(s) :
+		for filename in filenames:
+			fileNamesFull += SafeConfigParserWithIncludes.getIncludes(filename)
+		logSys.debug("Reading files: %s" % fileNamesFull)
 		if sys.version_info >= (3,2): # pragma: no cover
 			return SafeConfigParser.read(self, fileNamesFull, encoding='utf-8')
 		else:
 			return SafeConfigParser.read(self, fileNamesFull)
+
@@ -25,129 +25,26 @@ __copyright__ = "Copyright (c) 2004 Cyril Jaquier"
 __license__ = "GPL"

 import glob, os
-from ConfigParser import NoOptionError, NoSectionError
+from configparser import NoOptionError, NoSectionError

-from .configparserinc import SafeConfigParserWithIncludes, logLevel
+from .configparserinc import SafeConfigParserWithIncludes
 from ..helpers import getLogger

 # Gets the instance of the logger.
 logSys = getLogger(__name__)

-class ConfigReader():
-	"""Generic config reader class.
-
-	A caching adapter which automatically reuses already shared configuration.
-	"""
-
-	def __init__(self, use_config=None, share_config=None, **kwargs):
-		# use given shared config if possible (see read):
-		self._cfg_share = None
-		self._cfg = None
-		if use_config is not None:
-			self._cfg = use_config
-		# share config if possible:
-		if share_config is not None:
-			self._cfg_share = share_config
-			self._cfg_share_kwargs = kwargs
-			self._cfg_share_basedir = None
-		elif self._cfg is None:
-			self._cfg = ConfigReaderUnshared(**kwargs)
-
-	def setBaseDir(self, basedir):
-		if self._cfg:
-			self._cfg.setBaseDir(basedir)
-		else:
-			self._cfg_share_basedir = basedir
-
-	def getBaseDir(self):
-		if self._cfg:
-			return self._cfg.getBaseDir()
-		else:
-			return self._cfg_share_basedir
-
-	@property
-	def share_config(self):
-		return self._cfg_share
-
-	def read(self, name, once=True):
-		""" Overloads a default (not shared) read of config reader.
-
-	  To prevent mutiple reads of config files with it includes, reads into 
-	  the config reader, if it was not yet cached/shared by 'name'.
-	  """
-		# already shared ?
-		if not self._cfg:
-			self._create_unshared(name)
-		# performance feature - read once if using shared config reader:
-		if once and self._cfg.read_cfg_files is not None:
-			return self._cfg.read_cfg_files
-
-		# load:
-		logSys.info("Loading configs for %s under %s ", name, self._cfg.getBaseDir())
-		ret = self._cfg.read(name)
-
-		# save already read and return:
-		self._cfg.read_cfg_files = ret
-		return ret
-
-	def _create_unshared(self, name=''):
-		""" Allocates and share a config file by it name.
-
-	  Automatically allocates unshared or reuses shared handle by given 'name' and 
-	  init arguments inside a given shared storage.
-	  """
-		if not self._cfg and self._cfg_share is not None:
-			self._cfg = self._cfg_share.get(name)
-			if not self._cfg:
-				self._cfg = ConfigReaderUnshared(share_config=self._cfg_share, **self._cfg_share_kwargs)
-				if self._cfg_share_basedir is not None:
-					self._cfg.setBaseDir(self._cfg_share_basedir)
-				self._cfg_share[name] = self._cfg
-		else:
-			self._cfg = ConfigReaderUnshared(**self._cfg_share_kwargs)
-
-	def sections(self):
-		if self._cfg is not None:
-			return self._cfg.sections()
-		return []
-
-	def has_section(self, sec):
-		if self._cfg is not None:
-			return self._cfg.has_section(sec)
-		return False
-
-	def options(self, *args):
-		if self._cfg is not None:
-			return self._cfg.options(*args)
-		return {}
-
-	def get(self, sec, opt):
-		if self._cfg is not None:
-			return self._cfg.get(sec, opt)
-		return None
-
-	def getOptions(self, *args, **kwargs):
-		if self._cfg is not None:
-			return self._cfg.getOptions(*args, **kwargs)
-		return {}
-
-class ConfigReaderUnshared(SafeConfigParserWithIncludes):
-	"""Unshared config reader (previously ConfigReader).
-
-	Do not use this class (internal not shared/cached represenation).
-	Use ConfigReader instead.
-	"""
+class ConfigReader(SafeConfigParserWithIncludes):

 	DEFAULT_BASEDIR = '/etc/fail2ban'
 	
-	def __init__(self, basedir=None, *args, **kwargs):
-		SafeConfigParserWithIncludes.__init__(self, *args, **kwargs)
-		self.read_cfg_files = None
+	def __init__(self, basedir=None):
+		SafeConfigParserWithIncludes.__init__(self)
 		self.setBaseDir(basedir)
+		self.__opts = None
 	
 	def setBaseDir(self, basedir):
 		if basedir is None:
-			basedir = ConfigReaderUnshared.DEFAULT_BASEDIR	# stock system location
+			basedir = ConfigReader.DEFAULT_BASEDIR	# stock system location
 		self._basedir = basedir.rstrip('/')
 	
 	def getBaseDir(self):
@@ -158,7 +55,7 @@ class ConfigReaderUnshared(SafeConfigParserWithIncludes):
 			raise ValueError("Base configuration directory %s does not exist "
 							  % self._basedir)
 		basename = os.path.join(self._basedir, filename)
-		logSys.debug("Reading configs for %s under %s " , filename, self._basedir)
+		logSys.info("Reading configs for %s under %s "  % (basename, self._basedir))
 		config_files = [ basename + ".conf" ]

 		# possible further customizations under a .conf.d directory
@@ -170,18 +67,18 @@ class ConfigReaderUnshared(SafeConfigParserWithIncludes):
 		config_files += sorted(glob.glob('%s/*.local' % config_dir))

 		# choose only existing ones
-		config_files = filter(os.path.exists, config_files)
+		config_files = list(filter(os.path.exists, config_files))

 		if len(config_files):
 			# at least one config exists and accessible
-			logSys.debug("Reading config files: %s", ', '.join(config_files))
+			logSys.debug("Reading config files: " + ', '.join(config_files))
 			config_files_read = SafeConfigParserWithIncludes.read(self, config_files)
 			missed = [ cf for cf in config_files if cf not in config_files_read ]
 			if missed:
-				logSys.error("Could not read config files: %s", ', '.join(missed))
+				logSys.error("Could not read config files: " + ', '.join(missed))
 			if config_files_read:
 				return True
-			logSys.error("Found no accessible config files for %r under %s",
+			logSys.error("Found no accessible config files for %r under %s" %
 						 ( filename, self.getBaseDir() ))
 			return False
 		else:
@@ -201,7 +98,7 @@ class ConfigReaderUnshared(SafeConfigParserWithIncludes):
 	# 1 -> the name of the option
 	# 2 -> the default value for the option
 	
-	def getOptions(self, sec, options, pOptions=None):
+	def getOptions(self, sec, options, pOptions = None):
 		values = dict()
 		for option in options:
 			try:
@@ -214,7 +111,7 @@ class ConfigReaderUnshared(SafeConfigParserWithIncludes):
 				if not pOptions is None and option[1] in pOptions:
 					continue
 				values[option[1]] = v
-			except NoSectionError, e:
+			except NoSectionError as e:
 				# No "Definition" section or wrong basedir
 				logSys.error(e)
 				values[option[1]] = option[2]
@@ -224,22 +121,24 @@ class ConfigReaderUnshared(SafeConfigParserWithIncludes):
 					logSys.warning("'%s' not defined in '%s'. Using default one: %r"
 								% (option[1], sec, option[2]))
 					values[option[1]] = option[2]
-				elif logSys.getEffectiveLevel() <= logLevel:
-					logSys.log(logLevel, "Non essential option '%s' not defined in '%s'.", option[1], sec)
+				else:
+					logSys.debug(
+						"Non essential option '%s' not defined in '%s'.",
+						option[1], sec)
 			except ValueError:
 				logSys.warning("Wrong value for '" + option[1] + "' in '" + sec +
-							"'. Using default one: '" + `option[2]` + "'")
+							"'. Using default one: '" + repr(option[2]) + "'")
 				values[option[1]] = option[2]
 		return values

 class DefinitionInitConfigReader(ConfigReader):
 	"""Config reader for files with options grouped in [Definition] and
-	[Init] sections.
+       [Init] sections.

-	Is a base class for readers of filters and actions, where definitions
-	in jails might provide custom values for options defined in [Init]
-	section.
-	"""
+       Is a base class for readers of filters and actions, where definitions
+       in jails might provide custom values for options defined in [Init]
+       section.
+       """

 	_configOpts = []
 	
@@ -267,9 +166,7 @@ class DefinitionInitConfigReader(ConfigReader):

 	# needed for fail2ban-regex that doesn't need fancy directories
 	def readexplicit(self):
-		if not self._cfg:
-			self._create_unshared(self._file)
-		return SafeConfigParserWithIncludes.read(self._cfg, self._file)
+		return SafeConfigParserWithIncludes.read(self, self._file)
 	
 	def getOptions(self, pOpts):
 		self._opts = ConfigReader.getOptions(
@@ -277,7 +174,7 @@ class DefinitionInitConfigReader(ConfigReader):
 		
 		if self.has_section("Init"):
 			for opt in self.options("Init"):
-				if not self._initOpts.has_key(opt):
+				if opt not in self._initOpts:
 					self._initOpts[opt] = self.get("Init", opt)
 	
 	def convert(self):
@@ -33,20 +33,12 @@ logSys = getLogger(__name__)

 class Configurator:
 	
-	def __init__(self, force_enable=False, share_config=None):
+	def __init__(self):
 		self.__settings = dict()
 		self.__streams = dict()
-		# always share all config readers:
-		if share_config is None:
-			share_config = dict()
-		self.__share_config = share_config
-		self.__fail2ban = Fail2banReader(share_config=share_config)
-		self.__jails = JailsReader(force_enable=force_enable, share_config=share_config)
-
-	def Reload(self):
-		# clear all shared handlers:
-		self.__share_config.clear()
-
+		self.__fail2ban = Fail2banReader()
+		self.__jails = JailsReader()
+	
 	def setBaseDir(self, folderName):
 		self.__fail2ban.setBaseDir(folderName)
 		self.__jails.setBaseDir(folderName)
@@ -57,12 +57,13 @@ class CSocket:
 		self.__csock.close()
 		return ret
 	
-	@staticmethod
+	#@staticmethod
 	def receive(sock):
 		msg = EMPTY_BYTES
 		while msg.rfind(CSocket.END_STRING) == -1:
 			chunk = sock.recv(6)
 			if chunk == '':
-				raise RuntimeError, "socket connection broken"
+				raise RuntimeError("socket connection broken")
 			msg = msg + chunk
 		return loads(msg)
+	receive = staticmethod(receive)
@@ -26,7 +26,7 @@ __license__ = "GPL"

 import os, shlex

-from .configreader import DefinitionInitConfigReader
+from .configreader import ConfigReader, DefinitionInitConfigReader
 from ..server.action import CommandAction
 from ..helpers import getLogger

@@ -40,12 +40,8 @@ class FilterReader(DefinitionInitConfigReader):
 		["string", "failregex", ""],
 	]

-	def setFile(self, fileName):
-		self.__file = fileName
-		DefinitionInitConfigReader.setFile(self, os.path.join("filter.d", fileName))
-	
-	def getFile(self):
-		return self.__file
+	def read(self):
+		return ConfigReader.read(self, os.path.join("filter.d", self._file))
 	
 	def convert(self):
 		stream = list()
@@ -53,7 +49,7 @@ class FilterReader(DefinitionInitConfigReader):
 		opts = CommandAction.substituteRecursiveTags(combinedopts)
 		if not opts:
 			raise ValueError('recursive tag definitions unable to be resolved')
-		for opt, value in opts.iteritems():
+		for opt, value in opts.items():
 			if opt == "failregex":
 				for regex in value.split('\n'):
 					# Do not send a command if the rule is empty.
@@ -27,7 +27,7 @@ __license__ = "GPL"
 import re, glob, os.path
 import json

-from .configreader import ConfigReaderUnshared, ConfigReader
+from .configreader import ConfigReader
 from .filterreader import FilterReader
 from .actionreader import ActionReader
 from ..helpers import getLogger
@@ -111,7 +111,7 @@ class JailReader(ConfigReader):
 				filterName, filterOpt = JailReader.extractOptions(
 					self.__opts["filter"])
 				self.__filter = FilterReader(
-					filterName, self.__name, filterOpt, share_config=self.share_config, basedir=self.getBaseDir())
+					filterName, self.__name, filterOpt, basedir=self.getBaseDir())
 				ret = self.__filter.read()
 				if ret:
 					self.__filter.getOptions(self.__opts)
@@ -141,14 +141,14 @@ class JailReader(ConfigReader):
 					else:
 						action = ActionReader(
 							actName, self.__name, actOpt,
-							share_config=self.share_config, basedir=self.getBaseDir())
+							basedir=self.getBaseDir())
 						ret = action.read()
 						if ret:
 							action.getOptions(self.__opts)
 							self.__actions.append(action)
 						else:
 							raise AttributeError("Unable to read action")
-				except Exception, e:
+				except Exception as e:
 					logSys.error("Error in action definition " + act)
 					logSys.debug("Caught exception: %s" % (e,))
 					return False
@@ -213,14 +213,14 @@ class JailReader(ConfigReader):
 		if self.__filter:
 			stream.extend(self.__filter.convert())
 		for action in self.__actions:
-			if isinstance(action, (ConfigReaderUnshared, ConfigReader)):
+			if isinstance(action, ConfigReader):
 				stream.extend(action.convert())
 			else:
 				stream.append(action)
 		stream.insert(0, ["add", self.__name, backend])
 		return stream
 	
-	@staticmethod
+	#@staticmethod
 	def extractOptions(option):
 		match = JailReader.optionCRE.match(option)
 		if not match:
@@ -235,3 +235,4 @@ class JailReader(ConfigReader):
 					val for val in optmatch.group(2,3,4) if val is not None][0]
 				option_opts[opt.strip()] = value.strip()
 		return option_name, option_opts
+	extractOptions = staticmethod(extractOptions)
@@ -68,10 +68,9 @@ class JailsReader(ConfigReader):
 		for sec in sections:
 			if sec == 'INCLUDES':
 				continue
-			# use the cfg_share for filter/action caching and the same config for all 
-			# jails (use_config=...), therefore don't read it here:
-			jail = JailReader(sec, force_enable=self.__force_enable, 
-				share_config=self.share_config, use_config=self._cfg)
+			jail = JailReader(sec, basedir=self.getBaseDir(),
+							  force_enable=self.__force_enable)
+			jail.read()
 			ret = jail.getOptions()
 			if ret:
 				if jail.isEnabled():
@@ -128,7 +128,7 @@ def printFormatted():
 	firstHeading = False
 	for m in protocol:
 		if m[0] == '' and firstHeading:
-			print
+			print()
 		firstHeading = True
 		first = True
 		if len(m[0]) >= MARGIN:
@@ -139,7 +139,7 @@ def printFormatted():
 				first = False
 			else:
 				line = ' ' * (INDENT + MARGIN) + n.strip()
-			print line
+			print(line)

 ##
 # Prints the protocol in a "mediawiki" format.
@@ -149,19 +149,19 @@ def printWiki():
 	for m in protocol:
 		if m[0] == '':
 			if firstHeading:
-				print "|}"
+				print("|}")
 			__printWikiHeader(m[1], m[2])
 			firstHeading = True
 		else:
-			print "|-"
-			print "| <span style=\"white-space:nowrap;\"><tt>" + m[0] + "</tt></span> || || " + m[1]
-	print "|}"
+			print("|-")
+			print("| <span style=\"white-space:nowrap;\"><tt>" + m[0] + "</tt></span> || || " + m[1])
+	print("|}")

 def __printWikiHeader(section, desc):
-	print
-	print "=== " + section + " ==="
-	print
-	print desc
-	print
-	print "{|"
-	print "| '''Command''' || || '''Description'''"
+	print()
+	print("=== " + section + " ===")
+	print()
+	print(desc)
+	print()
+	print("{|")
+	print("| '''Command''' || || '''Description'''")
@@ -27,6 +27,7 @@ from abc import ABCMeta
 from collections import MutableMapping

 from ..helpers import getLogger
+import collections

 # Gets the instance of the logger.
 logSys = getLogger(__name__)
@@ -47,7 +48,7 @@ _RETCODE_HINTS = {

 # Dictionary to lookup signal name from number
 signame = dict((num, name)
-	for name, num in signal.__dict__.iteritems() if name.startswith("SIG"))
+	for name, num in signal.__dict__.items() if name.startswith("SIG"))

 class CallingMap(MutableMapping):
 	"""A Mapping type which returns the result of callable values.
@@ -74,7 +75,7 @@ class CallingMap(MutableMapping):

 	def __getitem__(self, key):
 		value = self.data[key]
-		if callable(value):
+		if isinstance(value, collections.Callable):
 			return value()
 		else:
 			return value
@@ -94,7 +95,7 @@ class CallingMap(MutableMapping):
 	def copy(self):
 		return self.__class__(self.data.copy())

-class ActionBase(object):
+class ActionBase(object, metaclass=ABCMeta):
 	"""An abstract base class for actions in Fail2Ban.

 	Action Base is a base definition of what methods need to be in
@@ -124,7 +125,6 @@ class ActionBase(object):
 	Any additional arguments specified in `jail.conf` or passed
 	via `fail2ban-client` will be passed as keyword arguments.
 	"""
-	__metaclass__ = ABCMeta

 	@classmethod
 	def __subclasshook__(cls, C):
@@ -135,7 +135,7 @@ class ActionBase(object):
 			"unban",
 			)
 		for method in required:
-			if not callable(getattr(C, method, None)):
+			if not isinstance(getattr(C, method, None), collections.Callable):
 				return False
 		return True

@@ -242,7 +242,7 @@ class CommandAction(ActionBase):
 		return dict(
 			(key, getattr(self, key))
 			for key in dir(self)
-			if not key.startswith("_") and not callable(getattr(self, key)))
+			if not key.startswith("_") and not isinstance(getattr(self, key), collections.Callable))

 	@property
 	def actionstart(self):
@@ -379,7 +379,7 @@ class CommandAction(ActionBase):
 			within the values recursively replaced.
 		"""
 		t = re.compile(r'<([^ >]+)>')
-		for tag in tags.iterkeys():
+		for tag in tags.keys():
 			if tag in cls._escapedTags:
 				# Escaped so won't match
 				continue
@@ -398,7 +398,7 @@ class CommandAction(ActionBase):
 					# Escaped so won't match
 					continue
 				else:
-					if tags.has_key(found_tag):
+					if found_tag in tags:
 						value = value.replace('<%s>' % found_tag , tags[found_tag])
 						#logSys.log(5, 'value now: %s' % value)
 						done.append(found_tag)
@@ -563,7 +563,7 @@ class CommandAction(ActionBase):
 						os.kill(popen.pid, signal.SIGKILL) # Kill the process
 						time.sleep(0.1)
 						retcode = popen.poll()
-			except OSError, e:
+			except OSError as e:
 				logSys.error("%s -- failed with %s" % (realCmd, e))
 		finally:
 			_cmd_lock.release()
@@ -213,7 +213,7 @@ class Actions(JailThread, Mapping):
 		bool
 			True when the thread exits nicely.
 		"""
-		for name, action in self._actions.iteritems():
+		for name, action in self._actions.items():
 			try:
 				action.start()
 			except Exception as e:
@@ -231,7 +231,7 @@ class Actions(JailThread, Mapping):
 				time.sleep(self.sleeptime)
 		self.__flushBan()

-		actions = self._actions.items()
+		actions = list(self._actions.items())
 		actions.reverse()
 		for name, action in actions:
 			try:
@@ -274,7 +274,7 @@ class Actions(JailThread, Mapping):
 					jail.database.getBansMerged(ip=ip, jail=jail).getAttempt()
 			if self.__banManager.addBanTicket(bTicket):
 				logSys.notice("[%s] Ban %s" % (self._jail.name, aInfo["ip"]))
-				for name, action in self._actions.iteritems():
+				for name, action in self._actions.items():
 					try:
 						action.ban(aInfo.copy())
 					except Exception as e:
@@ -323,7 +323,7 @@ class Actions(JailThread, Mapping):
 		aInfo["time"] = ticket.getTime()
 		aInfo["matches"] = "".join(ticket.getMatches())
 		logSys.notice("[%s] Unban %s" % (self._jail.name, aInfo["ip"]))
-		for name, action in self._actions.iteritems():
+		for name, action in self._actions.items():
 			try:
 				action.unban(aInfo.copy())
 			except Exception as e:
@@ -149,8 +149,12 @@ class AsyncServer(asyncore.dispatcher):
 		self.__init = True
 		# TODO Add try..catch
 		# There's a bug report for Python 2.6/3.0 that use_poll=True yields some 2.5 incompatibilities:
-		logSys.debug("Detected Python 2.6 or greater. asyncore.loop() not using poll")
-		asyncore.loop(use_poll=False) # fixes the "Unexpected communication problem" issue on Python 2.6 and 3.0
+		if sys.version_info >= (2, 6): # if python 2.6 or greater...
+			logSys.debug("Detected Python 2.6 or greater. asyncore.loop() not using poll")
+			asyncore.loop(use_poll = False) # fixes the "Unexpected communication problem" issue on Python 2.6 and 3.0
+		else: # pragma: no cover
+			logSys.debug("NOT Python 2.6/3.* - asyncore.loop() using poll")
+			asyncore.loop(use_poll = True)
 	
 	##
 	# Stops the communication server.
@@ -171,11 +175,12 @@ class AsyncServer(asyncore.dispatcher):

 	# @param sock: socket file.
 	
-	@staticmethod
+	#@staticmethod
 	def __markCloseOnExec(sock):
 		fd = sock.fileno()
 		flags = fcntl.fcntl(fd, fcntl.F_GETFD)
 		fcntl.fcntl(fd, fcntl.F_SETFD, flags|fcntl.FD_CLOEXEC)
+	__markCloseOnExec = staticmethod(__markCloseOnExec)

 ##
 # AsyncServerException is used to wrap communication exceptions.
@@ -126,7 +126,7 @@ class BanManager:
 	# @param ticket the FailTicket
 	# @return a BanTicket
 	
-	@staticmethod
+	#@staticmethod
 	def createBanTicket(ticket):
 		ip = ticket.getIP()
 		#lastTime = ticket.getTime()
@@ -134,6 +134,7 @@ class BanManager:
 		banTicket = BanTicket(ip, lastTime, ticket.getMatches())
 		banTicket.setAttempt(ticket.getAttempt())
 		return banTicket
+	createBanTicket = staticmethod(createBanTicket)
 	
 	##
 	# Add a ban ticket.
@@ -134,7 +134,7 @@ class Fail2BanDb(object):

 			logSys.info(
 				"Connected to fail2ban persistent database '%s'", filename)
-		except sqlite3.OperationalError, e:
+		except sqlite3.OperationalError as e:
 			logSys.error(
 				"Error connecting to fail2ban persistent database '%s': %s",
 				filename, e.args[0])
@@ -168,7 +168,7 @@ class DatePatternRegex(DateTemplate):
 	regex
 	pattern
 	"""
-	_patternRE = r"%%(%%|[%s])" % "".join(timeRE.keys())
+	_patternRE = r"%%(%%|[%s])" % "".join(list(timeRE.keys()))
 	_patternName = {
 		'a': "DAY", 'A': "DAYNAME", 'b': "MON", 'B': "MONTH", 'd': "Day",
 		'H': "24hour", 'I': "12hour", 'j': "Yearday", 'm': "Month",
@@ -232,7 +232,7 @@ class DatePatternRegex(DateTemplate):
 		if dateMatch:
 			groupdict = dict(
 				(key, value)
-				for key, value in dateMatch.groupdict().iteritems()
+				for key, value in dateMatch.groupdict().items()
 				if value is not None)
 			return reGroupDictStrptime(groupdict), dateMatch

@@ -91,7 +91,7 @@ class FailManager:
 			ip = ticket.getIP()
 			unixTime = ticket.getTime()
 			matches = ticket.getMatches()
-			if self.__failList.has_key(ip):
+			if ip in self.__failList:
 				fData = self.__failList[ip]
 				if fData.getLastReset() < unixTime - self.__maxTime:
 					fData.setLastReset(unixTime)
@@ -112,7 +112,7 @@ class FailManager:
 				# in case of having many active failures, it should be ran only
 				# if debug level is "low" enough
 				failures_summary = ', '.join(['%s:%d' % (k, v.getRetry())
-											  for k,v in  self.__failList.iteritems()])
+											  for k,v in  self.__failList.items()])
 				logSys.debug("Total # of detected failures: %d. Current failures from %d IPs (IP:count): %s"
 							 % (self.__failTotal, len(self.__failList), failures_summary))
 		finally:
@@ -136,7 +136,7 @@ class FailManager:
 			self.__lock.release()
 	
 	def __delFailure(self, ip):
-		if self.__failList.has_key(ip):
+		if ip in self.__failList:
 			del self.__failList[ip]
 	
 	def toBan(self):
@@ -100,7 +100,7 @@ class Filter(JailThread):
 				logSys.warning(
 					"Mutliline regex set for jail '%s' "
 					"but maxlines not greater than 1")
-		except RegexException, e:
+		except RegexException as e:
 			logSys.error(e)
 			raise e

@@ -134,7 +134,7 @@ class Filter(JailThread):
 		try:
 			regex = Regex(value)
 			self.__ignoreRegex.append(regex)
-		except RegexException, e:
+		except RegexException as e:
 			logSys.error(e)
 			raise e 

@@ -310,7 +310,7 @@ class Filter(JailThread):
 			logSys.warning('Requested to manually ban an ignored IP %s. User knows best. Proceeding to ban it.' % ip)

 		unixTime = MyTime.time()
-		for i in xrange(self.failManager.getMaxRetry()):
+		for i in range(self.failManager.getMaxRetry()):
 			self.failManager.addFailure(FailTicket(ip, unixTime))

 		# Perform the banning of the IP now.
@@ -361,7 +361,7 @@ class Filter(JailThread):
 			elif "." in s[1]: # 255.255.255.0 style mask
 				s[1] = len(re.search(
 					"(?<=b)1+", bin(DNSUtils.addr2bin(s[1]))).group())
-			s[1] = long(s[1])
+			s[1] = int(s[1])
 			try:
 				a = DNSUtils.cidr(s[0], s[1])
 				b = DNSUtils.cidr(ip, s[1])
@@ -525,7 +525,7 @@ class Filter(JailThread):
 										 failRegex.getMatchedLines()])
 								if not checkAllRegex:
 									break
-					except RegexException, e: # pragma: no cover - unsure if reachable
+					except RegexException as e: # pragma: no cover - unsure if reachable
 						logSys.error(e)
 		return failList

@@ -656,15 +656,15 @@ class FileFilter(Filter):
 		try:
 			has_content = container.open()
 		# see http://python.org/dev/peps/pep-3151/
-		except IOError, e:
+		except IOError as e:
 			logSys.error("Unable to open %s" % filename)
 			logSys.exception(e)
 			return False
-		except OSError, e: # pragma: no cover - requires race condition to tigger this
+		except OSError as e: # pragma: no cover - requires race condition to tigger this
 			logSys.error("Error opening %s" % filename)
 			logSys.exception(e)
 			return False
-		except OSError, e: # pragma: no cover - Requires implemention error in FileContainer to generate
+		except OSError as e: # pragma: no cover - Requires implemention error in FileContainer to generate
 			logSys.error("Internal errror in FileContainer open method - please report as a bug to https://github.com/fail2ban/fail2ban/issues")
 			logSys.exception(e)
 			return False
@@ -838,23 +838,24 @@ class DNSUtils:

 	IP_CRE = re.compile("^(?:\d{1,3}\.){3}\d{1,3}$")

-	@staticmethod
+	#@staticmethod
 	def dnsToIp(dns):
 		""" Convert a DNS into an IP address using the Python socket module.
 			Thanks to Kevin Drapel.
 		"""
 		try:
 			return set(socket.gethostbyname_ex(dns)[2])
-		except socket.error, e:
+		except socket.error as e:
 			logSys.warning("Unable to find a corresponding IP address for %s: %s"
 						% (dns, e))
 			return list()
-		except socket.error, e:
+		except socket.error as e:
 			logSys.warning("Socket error raised trying to resolve hostname %s: %s"
 						% (dns, e))
 			return list()
+	dnsToIp = staticmethod(dnsToIp)

-	@staticmethod
+	#@staticmethod
 	def searchIP(text):
 		""" Search if an IP address if directly available and return
 			it.
@@ -864,8 +865,9 @@ class DNSUtils:
 			return match
 		else:
 			return None
+	searchIP = staticmethod(searchIP)

-	@staticmethod
+	#@staticmethod
 	def isValidIP(string):
 		""" Return true if str is a valid IP
 		"""
@@ -875,8 +877,9 @@ class DNSUtils:
 			return True
 		except socket.error:
 			return False
+	isValidIP = staticmethod(isValidIP)

-	@staticmethod
+	#@staticmethod
 	def textToIp(text, useDns):
 		""" Return the IP of DNS found in a given text.
 		"""
@@ -898,24 +901,28 @@ class DNSUtils:
 					text, ipList)

 		return ipList
+	textToIp = staticmethod(textToIp)

-	@staticmethod
+	#@staticmethod
 	def cidr(i, n):
 		""" Convert an IP address string with a CIDR mask into a 32-bit
 			integer.
 		"""
 		# 32-bit IPv4 address mask
-		MASK = 0xFFFFFFFFL
+		MASK = 0xFFFFFFFF
 		return ~(MASK >> n) & MASK & DNSUtils.addr2bin(i)
+	cidr = staticmethod(cidr)

-	@staticmethod
+	#@staticmethod
 	def addr2bin(string):
 		""" Convert a string IPv4 address into an unsigned integer.
 		"""
 		return struct.unpack("!L", socket.inet_aton(string))[0]
+	addr2bin = staticmethod(addr2bin)

-	@staticmethod
+	#@staticmethod
 	def bin2addr(addr):
 		""" Convert a numeric IPv4 address into string n.n.n.n form.
 		"""
 		return socket.inet_ntoa(struct.pack("!L", addr))
+	bin2addr = staticmethod(bin2addr)
@@ -62,7 +62,7 @@ class FilterGamin(FileFilter):


 	def callback(self, path, event):
-		logSys.debug("Got event: " + `event` + " for " + path)
+		logSys.debug("Got event: " + repr(event) + " for " + path)
 		if event in (gamin.GAMCreated, gamin.GAMChanged, gamin.GAMExists):
 			logSys.debug("File changed: " + path)
 			self.__modified = True
@@ -136,7 +136,7 @@ class FilterPoll(FileFilter):
 				logSys.debug("%s has been modified", filename)
 				self.__prevStats[filename] = stats
 				return True
-		except OSError, e:
+		except OSError as e:
 			logSys.error("Unable to get stat on %s because of: %s"
 						 % (filename, e))
 			self.__file404Cnt[filename] += 1
@@ -44,7 +44,7 @@ if not hasattr(pyinotify, '__version__') \
 try:
 	manager = pyinotify.WatchManager()
 	del manager
-except Exception, e:
+except Exception as e:
 	raise ImportError("Pyinotify is probably not functional on this system: %s"
 					  % str(e))

@@ -188,7 +188,7 @@ class FilterSystemd(JournalFilter): # pragma: systemd no cover
 			logelements.append(logentry.get('MESSAGE', ''))

 		try:
-			logline = u" ".join(logelements)
+			logline = " ".join(logelements)
 		except UnicodeDecodeError:
 			# Python 2, so treat as string
 			logline = " ".join([str(logline) for logline in logelements])
@@ -23,7 +23,7 @@ __author__ = "Cyril Jaquier, Lee Clemens, Yaroslav Halchenko"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2011-2012 Lee Clemens, 2012 Yaroslav Halchenko"
 __license__ = "GPL"

-import Queue, logging
+import queue, logging

 from .actions import Actions
 from ..helpers import getLogger
@@ -71,7 +71,7 @@ class Jail:
 							"might not function correctly. Please shorten"
 							% name)
 		self.__name = name
-		self.__queue = Queue.Queue()
+		self.__queue = queue.Queue()
 		self.__filter = None
 		logSys.info("Creating new jail '%s'" % self.name)
 		self._setBackend(backend)
@@ -104,7 +104,7 @@ class Jail:
 					logSys.info("Initiated %r backend" % b)
 				self.__actions = Actions(self)
 				return					# we are done
-			except ImportError, e:
+			except ImportError as e:
 				# Log debug if auto, but error if specific
 				logSys.log(
 					logging.DEBUG if backend == "auto" else logging.ERROR,
@@ -117,25 +117,25 @@ class Jail:


 	def _initPolling(self):
-		from filterpoll import FilterPoll
+		from .filterpoll import FilterPoll
 		logSys.info("Jail '%s' uses poller" % self.name)
 		self.__filter = FilterPoll(self)

 	def _initGamin(self):
 		# Try to import gamin
-		from filtergamin import FilterGamin
+		from .filtergamin import FilterGamin
 		logSys.info("Jail '%s' uses Gamin" % self.name)
 		self.__filter = FilterGamin(self)

 	def _initPyinotify(self):
 		# Try to import pyinotify
-		from filterpyinotify import FilterPyinotify
+		from .filterpyinotify import FilterPyinotify
 		logSys.info("Jail '%s' uses pyinotify" % self.name)
 		self.__filter = FilterPyinotify(self)

 	def _initSystemd(self): # pragma: systemd no cover
 		# Try to import systemd
-		from filtersystemd import FilterSystemd
+		from .filtersystemd import FilterSystemd
 		logSys.info("Jail '%s' uses systemd" % self.name)
 		self.__filter = FilterSystemd(self)

@@ -199,7 +199,7 @@ class Jail:
 		"""
 		try:
 			return self.__queue.get(False)
-		except Queue.Empty:
+		except queue.Empty:
 			return False

 	def start(self):
@@ -26,71 +26,65 @@ import time, datetime
 ##
 # MyTime class.
 #
+# This class is a wrapper around time.time()  and time.gmtime(). When
+# performing unit test, it is very useful to get a fixed value from these
+# functions.
+# Thus, time.time() and time.gmtime() should never be called directly.
+# This wrapper should be called instead. The API are equivalent.

 class MyTime:
-	"""A wrapper around time module primarily for testing purposes
-
-	This class is a wrapper around time.time()  and time.gmtime(). When
-	performing unit test, it is very useful to get a fixed value from
-	these functions.  Thus, time.time() and time.gmtime() should never
-	be called directly.  This wrapper should be called instead. The API
-	are equivalent.
-	"""
-
+	
 	myTime = None
-
-	@staticmethod
+	
+	##
+	# Sets the current time.
+	#
+	# Use None in order to always get the real current time.
+	#
+	# @param t the time to set or None
+	
+	#@staticmethod
 	def setTime(t):
-		"""Set current time.
-
-		Use None in order to always get the real current time.
-
-		@param t the time to set or None
-		"""
-
 		MyTime.myTime = t
-
-	@staticmethod
+	setTime = staticmethod(setTime)
+	
+	##
+	# Equivalent to time.time()
+	#
+	# @return time.time() if setTime was called with None
+	
+	#@staticmethod
 	def time():
-		"""Decorate time.time() for the purpose of testing mocking
-
-		@return time.time() if setTime was called with None
-		"""
-
 		if MyTime.myTime is None:
 			return time.time()
 		else:
 			return MyTime.myTime
-
-	@staticmethod
+	time = staticmethod(time)
+	
+	##
+	# Equivalent to time.gmtime()
+	#
+	# @return time.gmtime() if setTime was called with None
+	
+	#@staticmethod
 	def gmtime():
-		"""Decorate time.gmtime() for the purpose of testing mocking
-
-		@return time.gmtime() if setTime was called with None
-		"""
 		if MyTime.myTime is None:
 			return time.gmtime()
 		else:
 			return time.gmtime(MyTime.myTime)
+	gmtime = staticmethod(gmtime)

-	@staticmethod
+	#@staticmethod
 	def now():
-		"""Decorate datetime.now() for the purpose of testing mocking
-
-		@return datetime.now() if setTime was called with None
-		"""
 		if MyTime.myTime is None:
 			return datetime.datetime.now()
 		else:
 			return datetime.datetime.fromtimestamp(MyTime.myTime)
+	now = staticmethod(now)

-	@staticmethod
 	def localtime(x=None):
-		"""Decorate time.localtime() for the purpose of testing mocking
-
-		@return time.localtime() if setTime was called with None
-		"""
 		if MyTime.myTime is None or x is not None:
 			return time.localtime(x)
 		else:
 			return time.localtime(MyTime.myTime)
+	localtime = staticmethod(localtime)
@@ -74,7 +74,7 @@ class Server:
 		sys.excepthook = excepthook

 		# First set the mask to only allow access to owner
-		os.umask(0077)
+		os.umask(0o077)
 		if self.__daemon: # pragma: no cover
 			logSys.info("Starting in daemon mode")
 			ret = self.__createDaemon()
@@ -90,20 +90,20 @@ class Server:
 			pidFile = open(pidfile, 'w')
 			pidFile.write("%s\n" % os.getpid())
 			pidFile.close()
-		except IOError, e:
+		except IOError as e:
 			logSys.error("Unable to create PID file: %s" % e)
 		
 		# Start the communication
 		logSys.debug("Starting communication")
 		try:
 			self.__asyncServer.start(sock, force)
-		except AsyncServerException, e:
+		except AsyncServerException as e:
 			logSys.error("Could not start server: %s", e)
 		# Removes the PID file.
 		try:
 			logSys.debug("Remove PID file %s" % pidfile)
 			os.remove(pidfile)
-		except OSError, e:
+		except OSError as e:
 			logSys.error("Unable to remove PID file: %s" % e)
 		logSys.info("Exiting Fail2ban")
 	
@@ -159,7 +159,7 @@ class Server:
 		logSys.info("Stopping all jails")
 		try:
 			self.__lock.acquire()
-			for jail in self.__jails.keys():
+			for jail in list(self.__jails.keys()):
 				self.stopJail(jail)
 		finally:
 			self.__lock.release()
@@ -486,7 +486,7 @@ class Server:
 			# the child gets a new PID, making it impossible for its PID to equal its
 			# PGID.
 			pid = os.fork()
-		except OSError, e:
+		except OSError as e:
 			return((e.errno, e.strerror))	 # ERROR (return a tuple)
 		
 		if pid == 0:	   # The first child.
@@ -507,7 +507,7 @@ class Server:
 				# fork guarantees that the child is no longer a session leader, thus
 				# preventing the daemon from ever acquiring a controlling terminal.
 				pid = os.fork()		# Fork a second child.
-			except OSError, e:
+			except OSError as e:
 				return((e.errno, e.strerror))  # ERROR (return a tuple)
 		
 			if (pid == 0):	  # The second child.
@@ -57,7 +57,7 @@ def reGroupDictStrptime(found_dict):
 	# weekday and julian defaulted to -1 so as to signal need to calculate
 	# values
 	weekday = julian = -1
-	for group_key in found_dict.keys():
+	for group_key in list(found_dict.keys()):
 		# Directives not explicitly handled below:
 		#   c, x, X
 		#	  handled by making out of other directives
@@ -62,7 +62,7 @@ class Ticket:
 			return False

 	def setIP(self, value):
-		if isinstance(value, basestring):
+		if isinstance(value, str):
 			# guarantee using regular str instead of unicode for the IP
 			value = str(value)
 		self.__ip = value
@@ -29,6 +29,7 @@ import json

 from ..helpers import getLogger
 from .. import version
+import collections

 # Gets the instance of the logger.
 logSys = getLogger(__name__)
@@ -51,11 +52,11 @@ class Transmitter:
 	
 	def proceed(self, command):
 		# Deserialize object
-		logSys.debug("Command: " + `command`)
+		logSys.debug("Command: " + repr(command))
 		try:
 			ret = self.__commandHandler(command)
 			ack = 0, ret
-		except Exception, e:
+		except Exception as e:
 			logSys.warning("Command %r has failed. Received %r"
 						% (command, e))
 			ack = 1, e
@@ -248,7 +249,7 @@ class Transmitter:
 			actionname = command[2]
 			actionkey = command[3]
 			action = self.__server.getAction(name, actionname)
-			if callable(getattr(action, actionkey, None)):
+			if isinstance(getattr(action, actionkey, None), collections.Callable):
 				actionvalue = json.loads(command[4]) if len(command)>4 else {}
 				return getattr(action, actionkey)(**actionvalue)
 			else:
@@ -306,7 +307,7 @@ class Transmitter:
 		elif command[1] == "bantime":
 			return self.__server.getBanTime(name)
 		elif command[1] == "actions":
-			return self.__server.getActions(name).keys()
+			return list(self.__server.getActions(name).keys())
 		elif command[1] == "action":
 			actionname = command[2]
 			actionvalue = command[3]
@@ -318,13 +319,13 @@ class Transmitter:
 			return [
 				key for key in dir(action)
 				if not key.startswith("_") and
-					not callable(getattr(action, key))]
+					not isinstance(getattr(action, key), collections.Callable)]
 		elif command[1] == "actionmethods":
 			actionname = command[2]
 			action = self.__server.getAction(name, actionname)
 			return [
 				key for key in dir(action)
-				if not key.startswith("_") and callable(getattr(action, key))]
+				if not key.startswith("_") and isinstance(getattr(action, key), collections.Callable)]
 		raise Exception("Invalid command (no get action or not yet implemented)")
 	
 	def status(self, command):
@@ -22,7 +22,11 @@ import unittest
 import sys

 from ..dummyjail import DummyJail
-from ..utils import CONFIG_DIR
+
+if os.path.exists('config/fail2ban.conf'):
+	CONFIG_DIR = "config"
+else:
+	CONFIG_DIR='/etc/fail2ban'

 if sys.version_info >= (2,7):
 	class BadIPsActionTest(unittest.TestCase):
@@ -30,7 +30,10 @@ else:

 from ..dummyjail import DummyJail

-from ..utils import CONFIG_DIR
+if os.path.exists('config/fail2ban.conf'):
+	CONFIG_DIR = "config"
+else:
+	CONFIG_DIR='/etc/fail2ban'

 class TestSMTPServer(smtpd.SMTPServer):

@@ -186,10 +186,8 @@ class CommandActionTest(LogCaptureTestCase):
 		# Should take a minute
 		self.assertRaises(
 			RuntimeError, CommandAction.executeCmd, 'sleep 60', timeout=2)
-		# give a test still 1 second, because system could be too busy
-		self.assertTrue(time.time() >= stime + 2 and time.time() <= stime + 3)
-		self.assertTrue(self._is_logged('sleep 60 -- timed out after 2 seconds') 
-			or self._is_logged('sleep 60 -- timed out after 3 seconds'))
+		self.assertAlmostEqual(time.time() - stime, 2, places=0)
+		self.assertTrue(self._is_logged('sleep 60 -- timed out after 2 seconds'))
 		self.assertTrue(self._is_logged('sleep 60 -- killed with SIGTERM'))

 	def testCaptureStdOutErr(self):
@@ -21,9 +21,9 @@ __author__ = "Cyril Jaquier, Yaroslav Halchenko"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2011-2013 Yaroslav Halchenko"
 __license__ = "GPL"

-import os, glob, shutil, tempfile, unittest, re, logging
-from ..client.configreader import ConfigReaderUnshared
-from ..client import configparserinc
+import os, glob, shutil, tempfile, unittest
+
+from ..client.configreader import ConfigReader
 from ..client.jailreader import JailReader
 from ..client.filterreader import FilterReader
 from ..client.jailsreader import JailsReader
@@ -32,10 +32,8 @@ from ..client.configurator import Configurator
 from .utils import LogCaptureTestCase

 TEST_FILES_DIR = os.path.join(os.path.dirname(__file__), "files")
-
-from .utils import CONFIG_DIR
-
 STOCK = os.path.exists(os.path.join('config','fail2ban.conf'))
+CONFIG_DIR='config' if STOCK else '/etc/fail2ban'

 IMPERFECT_CONFIG = os.path.join(os.path.dirname(__file__), 'config')

@@ -44,7 +42,7 @@ class ConfigReaderTest(unittest.TestCase):
 	def setUp(self):
 		"""Call before every test case."""
 		self.d = tempfile.mkdtemp(prefix="f2b-temp")
-		self.c = ConfigReaderUnshared(basedir=self.d)
+		self.c = ConfigReader(basedir=self.d)

 	def tearDown(self):
 		"""Call after every test case."""
@@ -334,80 +332,6 @@ class FilterReaderTest(unittest.TestCase):
 		filterReader.getOptions(None)
 		self.assertRaises(ValueError, FilterReader.convert, filterReader)

-	def testFilterReaderExplicit(self):
-		# read explicit uses absolute path:
-		path_ = os.path.abspath(os.path.join(TEST_FILES_DIR, "filter.d"))
-		filterReader = FilterReader(os.path.join(path_, "testcase01.conf"), "testcase01", {})
-		self.assertEqual(filterReader.readexplicit(), 
-			[os.path.join(path_, "testcase-common.conf"), os.path.join(path_, "testcase01.conf")]
-		)
-		try:
-			filterReader.getOptions(None)
-			# from included common
-			filterReader.get('Definition', '__prefix_line')
-			# from testcase01
-			filterReader.get('Definition', 'failregex')
-			filterReader.get('Definition', 'ignoreregex')
-		except Exception, e: # pragma: no cover - failed if reachable
-			self.fail('unexpected options after readexplicit: %s' % (e))
-
-class JailsReaderTestCache(LogCaptureTestCase):
-
-	def _readWholeConf(self, basedir, force_enable=False, share_config=None):
-		# read whole configuration like a file2ban-client ...
-		configurator = Configurator(force_enable=force_enable, share_config=share_config)
-		configurator.setBaseDir(basedir)
-		configurator.readEarly()
-		configurator.getEarlyOptions()
-		configurator.readAll()
-		# from here we test a cache with all includes / before / after :
-		self.assertTrue(configurator.getOptions(None))
-
-	def _getLoggedReadCount(self, filematch):
-		cnt = 0
-		for s in self.getLog().rsplit('\n'):
-			if re.match(r"^\s*Reading files?: .*/"+filematch, s):
-				cnt += 1
-		return cnt
-
-	def testTestJailConfCache(self):
-		saved_ll = configparserinc.logLevel
-		configparserinc.logLevel = logging.DEBUG
-		basedir = tempfile.mkdtemp("fail2ban_conf")
-		try:
-			shutil.rmtree(basedir)
-			shutil.copytree(CONFIG_DIR, basedir)
-			shutil.copy(CONFIG_DIR + '/jail.conf', basedir + '/jail.local')
-			shutil.copy(CONFIG_DIR + '/fail2ban.conf', basedir + '/fail2ban.local')
-
-			# common sharing handle for this test:
-			share_cfg = dict()
-
-			# read whole configuration like a file2ban-client ...
-			self._readWholeConf(basedir, share_config=share_cfg)
-			# how many times jail.local was read:
-			cnt = self._getLoggedReadCount('jail.local')
-			# if cnt > 1:
-			# 	self.printLog()
-			self.assertTrue(cnt == 1, "Unexpected count by reading of jail files, cnt = %s" % cnt)
-
-			# read whole configuration like a file2ban-client, again ...
-			# but this time force enable all jails, to check filter and action cached also:
-			self._readWholeConf(basedir, force_enable=True, share_config=share_cfg)
-			cnt = self._getLoggedReadCount(r'jail\.local')
-			# still one (no more reads):
-			self.assertTrue(cnt == 1, "Unexpected count by second reading of jail files, cnt = %s" % cnt)
-
-			# same with filter:
-			cnt = self._getLoggedReadCount(r'filter\.d/common\.conf')
-			self.assertTrue(cnt == 1, "Unexpected count by reading of filter files, cnt = %s" % cnt)
-			# same with action:
-			cnt = self._getLoggedReadCount(r'action\.d/iptables-common\.conf')
-			self.assertTrue(cnt == 1, "Unexpected count by reading of action files, cnt = %s" % cnt)
-		finally:
-			shutil.rmtree(basedir)
-			configparserinc.logLevel = saved_ll
-

 class JailsReaderTest(LogCaptureTestCase):

@@ -92,7 +92,7 @@ class DatabaseTest(unittest.TestCase):
 		self.db = Fail2BanDb(self.dbFilename)
 		self.assertEqual(self.db.getJailNames(), set(['DummyJail #29162448 with 0 tickets']))
 		self.assertEqual(self.db.getLogPaths(), set(['/tmp/Fail2BanDb_pUlZJh.log']))
-		ticket = FailTicket("127.0.0.1", 1388009242.26, [u"abc\n"])
+		ticket = FailTicket("127.0.0.1", 1388009242.26, ["abc\n"])
 		self.assertEqual(self.db.getBans()[0], ticket)

 		self.assertEqual(self.db.updateDb(Fail2BanDb.__version__), Fail2BanDb.__version__)
@@ -86,7 +86,6 @@ class DateDetectorTest(unittest.TestCase):
 			(False, "23-Jan-2005 21:59:59.02"),
 			(False, "23-Jan-2005 21:59:59 +0100"),
 			(False, "23-01-2005 21:59:59"),
-			(True, "1106513999"), # Portsetry
 			(False, "01-23-2005 21:59:59.252"), # reported on f2b, causes Feb29 fix to break
 			(False, "@4000000041f4104f00000000"), # TAI64N
 			(False, "2005-01-23T20:59:59.252Z"), #ISO 8601 (UTC)
@@ -140,7 +139,7 @@ class DateDetectorTest(unittest.TestCase):
 		self.assertEqual(logMatch.group(), '2012/10/11 02:37:17')
 		self.__datedetector.sortTemplate()
 		# confuse it with year being at the end
-		for i in xrange(10):
+		for i in range(10):
 			( logTime, logMatch ) =	self.__datedetector.getTime('11/10/2012 02:37:17 [error] 18434#0')
 			self.assertEqual(logTime, mu)
 			self.assertEqual(logMatch.group(), '11/10/2012 02:37:17')
@@ -33,11 +33,11 @@ class AddFailure(unittest.TestCase):

 	def setUp(self):
 		"""Call before every test case."""
-		self.__items = [[u'193.168.0.128', 1167605999.0],
-					    [u'193.168.0.128', 1167605999.0],
-					    [u'193.168.0.128', 1167605999.0],
-					    [u'193.168.0.128', 1167605999.0],
-					    [u'193.168.0.128', 1167605999.0],
+		self.__items = [['193.168.0.128', 1167605999.0],
+					    ['193.168.0.128', 1167605999.0],
+					    ['193.168.0.128', 1167605999.0],
+					    ['193.168.0.128', 1167605999.0],
+					    ['193.168.0.128', 1167605999.0],
 					    ['87.142.124.10', 1167605999.0],
 					    ['87.142.124.10', 1167605999.0],
 					    ['87.142.124.10', 1167605999.0],
@@ -1,21 +1,14 @@
 #!/bin/env python
 import requests
+import md5

-try:
-    import hashlib
-    md5sum = hashlib.md5
-except ImportError: # pragma: no cover
-    # hashlib was introduced in Python 2.5.  For compatibility with those
-    # elderly Pythons, import from md5
-    import md5
-    md5sum = md5.new

 def auth(v):

-    ha1 = md5sum(username + ':' + realm + ':' + password).hexdigest()
-    ha2 = md5sum("GET:" + url).hexdigest()
+    ha1 = md5.new(username + ':' + realm + ':' + password).hexdigest()
+    ha2 = md5.new("GET:" + url).hexdigest()
    
-    #response = md5sum(ha1 + ':' + v['nonce'][1:-1] + ':' + v['nc'] + ':' + v['cnonce'][1:-1]
+    #response = md5.new(ha1 + ':' + v['nonce'][1:-1] + ':' + v['nc'] + ':' + v['cnonce'][1:-1]
    #                  + ':' + v['qop'][1:-1] + ':' + ha2).hexdigest()
    
    nonce = v['nonce'][1:-1]
@@ -24,7 +17,7 @@ def auth(v):
    #opaque = v.get('opaque') or ''
    qop = v['qop'][1:-1]
    algorithm = v['algorithm']
-    response = md5sum(ha1 + ':' + nonce + ':' + nc + ':' + cnonce + ':' + qop + ':' + ha2).hexdigest()
+    response = md5.new(ha1 + ':' + nonce + ':' + nc + ':' + cnonce + ':' + qop + ':' + ha2).hexdigest()
    
    p = requests.Request('GET', host + url).prepare()
    #p.headers['Authentication-Info'] = response 
@@ -19,9 +19,6 @@
 # failJSON: { "time": "2013-07-20T21:34:49", "match": true , "host": "127.0.0.1" } 
 [Sat Jul 20 21:34:49.453232 2013] [access_compat:error] [pid 17512:tid 140123104306944] [client 127.0.0.1:51380] AH01797: client denied by server configuration: /var/www/html/noentry/cant_get_me.html

-# failJSON: { "time": "2014-09-14T21:44:43", "match": true , "host": "192.3.9.178" } 
-[Sun Sep 14 21:44:43.008606 2014] [authz_core:error] [pid 10691] [client 192.3.9.178:44271] AH01630: client denied by server configuration: /var/www/html/noentry/cant_get_me.html
-
 # wget --http-user='' --http-password='' http://localhost/basic/file/cant_get_me.html -O /dev/null
 # failJSON: { "time": "2013-07-17T23:14:37", "match": true , "host": "127.0.0.1" }
 [Wed Jul 17 23:14:37 2013] [error] [client 127.0.0.1] user  not found: /basic/anon/cant_get_me.html
@@ -1,4 +0,0 @@
-# failJSON: { "time": "2014-09-25T09:27:18", "match": true , "host": "89.207.132.76" }
-[Thu Sep 25 09:27:18.813902 2014] [cgi:error] [pid 16860] [client 89.207.132.76:59635] AH01215: /bin/bash: warning: HTTP_TEST: ignoring function definition attempt
-# failJSON: { "time": "2014-09-25T09:29:56", "match": true , "host": "162.247.73.206" }
-[Thu Sep 25 09:29:56.141832 2014] [cgi:error] [pid 16864] [client 162.247.73.206:41273] AH01215: /bin/bash: error importing function definition for `HTTP_TEST'
@@ -1,4 +0,0 @@
-# failJSON: { "time": "2014-06-27T17:51:19", "match": true , "host": "192.168.56.1" }
-1403884279 - 06/27/2014 17:51:19 Host: 192.168.56.1/192.168.56.1 Port: 1 TCP Blocked
-# failJSON: { "time": "2014-06-27T17:51:19", "match": true , "host": "192.168.56.1" }
-1403884279 - 06/27/2014 17:51:19 Host: 192.168.56.1/192.168.56.1 Port: 1 UDP Blocked
@@ -5,6 +5,3 @@ Dec  2 22:24:22 hel postfix/smtpd[7676]: warning: 114-44-142-233.dynamic.hinet.n
 # failJSON: { "time": "2005-03-10T13:33:30", "match": true , "host": "1.1.1.1" }
 Mar 10 13:33:30 gandalf postfix/smtpd[3937]: warning: HOSTNAME[1.1.1.1]: SASL LOGIN authentication failed: authentication failure

-#3 Example from postfix post-debian changes to rename to add "submission" to syslog name
-# failJSON: { "time": "2004-09-06T00:44:56", "match": true , "host": "82.221.106.233" }
-Sep  6 00:44:56 trianon postfix/submission/smtpd[11538]: warning: unknown[82.221.106.233]: SASL LOGIN authentication failed: UGFzc3dvcmQ6
@@ -22,7 +22,7 @@
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier; 2012 Yaroslav Halchenko"
 __license__ = "GPL"

-from __builtin__ import open as fopen
+from builtins import open as fopen
 import unittest
 import getpass
 import os
@@ -133,7 +133,7 @@ def _copy_lines_between_files(in_, fout, n=None, skip=0, mode='a', terminal_line
 	else:
 		fin = in_
 	# Skip
-	for i in xrange(skip):
+	for i in range(skip):
 		fin.readline()
 	# Read
 	i = 0
@@ -170,7 +170,7 @@ def _copy_lines_to_journal(in_, fields={},n=None, skip=0, terminal_line=""): # p
 					"PRIORITY": "7",
 					})
 	# Skip
-	for i in xrange(skip):
+	for i in range(skip):
 		fin.readline()
 	# Read/Write
 	i = 0
@@ -806,7 +806,7 @@ class GetFailures(unittest.TestCase):

 	# so that they could be reused by other tests
 	FAILURES_01 = ('193.168.0.128', 3, 1124013599.0,
-				  [u'Aug 14 11:59:59 [sshd] error: PAM: Authentication failure for kevin from 193.168.0.128']*3)
+				  ['Aug 14 11:59:59 [sshd] error: PAM: Authentication failure for kevin from 193.168.0.128']*3)

 	def setUp(self):
 		"""Call before every test case."""
@@ -856,8 +856,8 @@ class GetFailures(unittest.TestCase):

 	def testGetFailures02(self):
 		output = ('141.3.81.106', 4, 1124013539.0,
-				  [u'Aug 14 11:%d:59 i60p295 sshd[12365]: Failed publickey for roehl from ::ffff:141.3.81.106 port 51332 ssh2'
-				   % m for m in 53, 54, 57, 58])
+				  ['Aug 14 11:%d:59 i60p295 sshd[12365]: Failed publickey for roehl from ::ffff:141.3.81.106 port 51332 ssh2'
+				   % m for m in (53, 54, 57, 58)])

 		self.filter.addLogPath(GetFailures.FILENAME_02)
 		self.filter.addFailRegex("Failed .* from <HOST>")
@@ -889,11 +889,11 @@ class GetFailures(unittest.TestCase):
 	def testGetFailuresUseDNS(self):
 		# We should still catch failures with usedns = no ;-)
 		output_yes = ('93.184.216.119', 2, 1124013539.0,
-					  [u'Aug 14 11:54:59 i60p295 sshd[12365]: Failed publickey for roehl from example.com port 51332 ssh2',
-					   u'Aug 14 11:58:59 i60p295 sshd[12365]: Failed publickey for roehl from ::ffff:93.184.216.119 port 51332 ssh2'])
+					  ['Aug 14 11:54:59 i60p295 sshd[12365]: Failed publickey for roehl from example.com port 51332 ssh2',
+					   'Aug 14 11:58:59 i60p295 sshd[12365]: Failed publickey for roehl from ::ffff:93.184.216.119 port 51332 ssh2'])

 		output_no = ('93.184.216.119', 1, 1124013539.0,
-					  [u'Aug 14 11:58:59 i60p295 sshd[12365]: Failed publickey for roehl from ::ffff:93.184.216.119 port 51332 ssh2'])
+					  ['Aug 14 11:58:59 i60p295 sshd[12365]: Failed publickey for roehl from ::ffff:93.184.216.119 port 51332 ssh2'])

 		# Actually no exception would be raised -- it will be just set to 'no'
 		#self.assertRaises(ValueError,
@@ -30,7 +30,7 @@ import shutil
 import fnmatch
 import datetime
 from glob import glob
-from StringIO import StringIO
+from io import StringIO

 from ..helpers import formatExceptionInfo, mbasename, TraceBack, FormatterWithTraceBack, getLogger
 from ..server.datetemplate import DatePatternRegex
@@ -138,7 +138,7 @@ class TestsUtilsTest(unittest.TestCase):
 				else: func_raise()

 			try:
-				print deep_function(3)
+				print(deep_function(3))
 			except ValueError:
 				s = tb()

@@ -24,13 +24,21 @@ __license__ = "GPL"

 import unittest, sys, os, fileinput, re, time, datetime, inspect

-import json
+if sys.version_info >= (2, 6):
+	import json
+else:
+	import simplejson as json
+	next = lambda x: x.__next__()

 from ..server.filter import Filter
 from ..client.filterreader import FilterReader
-from .utils import setUpMyTime, tearDownMyTime, CONFIG_DIR
+from .utils import setUpMyTime, tearDownMyTime

 TEST_FILES_DIR = os.path.join(os.path.dirname(__file__), "files")
+if os.path.exists('config/fail2ban.conf'):
+	CONFIG_DIR = "config"
+else:
+	CONFIG_DIR='/etc/fail2ban'

 class FilterSamplesRegex(unittest.TestCase):

@@ -86,7 +94,7 @@ def testSampleRegexsFactory(name):
 			if jsonREMatch:
 				try:
 					faildata = json.loads(jsonREMatch.group(1))
-				except ValueError, e:
+				except ValueError as e:
 					raise ValueError("%s: %s:%i" %
 						(e, logFile.filename(), logFile.filelineno()))
 				line = next(logFile)
@@ -108,7 +116,7 @@ def testSampleRegexsFactory(name):
 					"Line matched when shouldn't have: %s:%i %r" %
 					(logFile.filename(), logFile.filelineno(), line))
 				self.assertEqual(len(ret), 1, "Multiple regexs matched %r - %s:%i" %
-								 (map(lambda x: x[0], ret),logFile.filename(), logFile.filelineno()))
+								 ([x[0] for x in ret],logFile.filename(), logFile.filelineno()))

 				# Verify timestamp and host as expected
 				failregex, host, fail2banTime, lines = ret[0]
@@ -141,7 +149,7 @@ def testSampleRegexsFactory(name):

 	return testFilter

-for filter_ in filter(lambda x: not x.endswith('common.conf'), os.listdir(os.path.join(CONFIG_DIR, "filter.d"))):
+for filter_ in [x for x in os.listdir(os.path.join(CONFIG_DIR, "filter.d")) if not x.endswith('common.conf')]:
 	filterName = filter_.rpartition(".")[0]
 	if not filterName.startswith('.'):
 		setattr(
@@ -685,7 +685,7 @@ class TransmitterLogging(TransmitterBase):

 	def testLogTarget(self):
 		logTargets = []
-		for _ in xrange(3):
+		for _ in range(3):
 			tmpFile = tempfile.mkstemp("fail2ban", "transmitter")
 			logTargets.append(tmpFile[1])
 			os.close(tmpFile[0])
@@ -738,26 +738,26 @@ class TransmitterLogging(TransmitterBase):
 				self.assertEqual(self.transm.proceed(["flushlogs"]), (0, "rolled over"))
 				l.warning("After flushlogs")
 				with open(fn2,'r') as f:
-					line1 = f.next()
+					line1 = next(f)
 					if line1.find('Changed logging target to') >= 0:
-						line1 = f.next()
+						line1 = next(f)
 					self.assertTrue(line1.endswith("Before file moved\n"))
-					line2 = f.next()
+					line2 = next(f)
 					self.assertTrue(line2.endswith("After file moved\n"))
 					try:
-						n = f.next()
+						n = next(f)
 						if n.find("Command: ['flushlogs']") >=0:
-							self.assertRaises(StopIteration, f.next)
+							self.assertRaises(StopIteration, f.__next__)
 						else:
 							self.fail("Exception StopIteration or Command: ['flushlogs'] expected. Got: %s" % n)
 					except StopIteration:
 						pass # on higher debugging levels this is expected
 				with open(fn,'r') as f:
-					line1 = f.next()
+					line1 = next(f)
 					if line1.find('rollover performed on') >= 0:
-						line1 = f.next()
+						line1 = next(f)
 					self.assertTrue(line1.endswith("After flushlogs\n"))
-					self.assertRaises(StopIteration, f.next)
+					self.assertRaises(StopIteration, f.__next__)
 					f.close()
 			finally:
 				os.remove(fn2)
@@ -25,25 +25,15 @@ __license__ = "GPL"
 import logging
 import os
 import re
-import sys
 import time
 import unittest
-from StringIO import StringIO
+from io import StringIO

 from ..server.mytime import MyTime
 from ..helpers import getLogger

 logSys = getLogger(__name__)

-CONFIG_DIR = os.environ.get('FAIL2BAN_CONFIG_DIR', None)
-
-if not CONFIG_DIR:
-# Use heuristic to figure out where configuration files are
-	if os.path.exists(os.path.join('config','fail2ban.conf')):
-		CONFIG_DIR = 'config'
-	else:
-		CONFIG_DIR = '/etc/fail2ban'
-
 def mtimesleep():
 	# no sleep now should be necessary since polling tracks now not only
 	# mtime but also ino and size
@@ -112,7 +102,6 @@ def gatherTests(regexps=None, no_network=False):
 	tests.addTest(unittest.makeSuite(clientreadertestcase.JailReaderTest))
 	tests.addTest(unittest.makeSuite(clientreadertestcase.FilterReaderTest))
 	tests.addTest(unittest.makeSuite(clientreadertestcase.JailsReaderTest))
-	tests.addTest(unittest.makeSuite(clientreadertestcase.JailsReaderTestCache))
 	# CSocket and AsyncServer
 	tests.addTest(unittest.makeSuite(sockettestcase.Socket))
 	# Misc helpers
@@ -167,13 +156,13 @@ def gatherTests(regexps=None, no_network=False):
 	try:
 		from ..server.filtergamin import FilterGamin
 		filters.append(FilterGamin)
-	except Exception, e: # pragma: no cover
+	except Exception as e: # pragma: no cover
 		logSys.warning("Skipping gamin backend testing. Got exception '%s'" % e)

 	try:
 		from ..server.filterpyinotify import FilterPyinotify
 		filters.append(FilterPyinotify)
-	except Exception, e: # pragma: no cover
+	except Exception as e: # pragma: no cover
 		logSys.warning("I: Skipping pyinotify backend testing. Got exception '%s'" % e)

 	for Filter_ in filters:
@@ -182,7 +171,7 @@ def gatherTests(regexps=None, no_network=False):
 	try: # pragma: systemd no cover
 		from ..server.filtersystemd import FilterSystemd
 		tests.addTest(unittest.makeSuite(filtertestcase.get_monitor_failures_journal_testcase(FilterSystemd)))
-	except Exception, e: # pragma: no cover
+	except Exception as e: # pragma: no cover
 		logSys.warning("I: Skipping systemd backend testing. Got exception '%s'" % e)


@@ -206,8 +195,6 @@ class LogCaptureTestCase(unittest.TestCase):
 		# Let's log everything into a string
 		self._log = StringIO()
 		logSys.handlers = [logging.StreamHandler(self._log)]
-		if self._old_level < logging.DEBUG: # so if HEAVYDEBUG etc -- show them!
-			logSys.handlers += self._old_handlers
 		logSys.setLevel(getattr(logging, 'DEBUG'))

 	def tearDown(self):
@@ -220,8 +207,5 @@ class LogCaptureTestCase(unittest.TestCase):
 	def _is_logged(self, s):
 		return s in self._log.getvalue()

-	def getLog(self):
-		return self._log.getvalue()
-
 	def printLog(self):
-		print(self._log.getvalue())
+		print((self._log.getvalue()))
@@ -24,4 +24,4 @@ __author__ = "Cyril Jaquier, Yaroslav Halchenko, Steven Hiscocks, Daniel Black"
 __copyright__ = "Copyright (c) 2004 Cyril Jaquier, 2011-2014 Yaroslav Halchenko, 2013-2013 Steven Hiscocks, Daniel Black"
 __license__ = "GPL-v2+"

-version = "0.9.1"
+version = "0.9.0.dev"
@@ -1,209 +0,0 @@
-#!/usr/bin/perl
-##########################################################################
-# $Id: fail2ban 150 2013-06-18 22:19:38Z mtremaine $
-##########################################################################
-# $Log: fail2ban,v $
-#
-# Revision 1.6  2014/08/11 16:07:46  yoh
-# Patches from Yaroslav Halchenko to match adjusted in 0.9.x lines.
-# Also reports now total number of hits (matches) along with Ban:Unban
-# and relaxed regular expressions for matching any log level
-#
-# Revision 1.5  2008/08/18 16:07:46  mike
-# Patches from Paul Gear <paul at libertysys.com> -mgt
-#
-# Revision 1.4  2008/06/30 23:07:51  kirk
-# fixed copyright holders for files where I know who they should be
-#
-# Revision 1.3  2008/03/24 23:31:26  kirk
-# added copyright/license notice to each script
-#
-# Revision 1.2  2006/12/15 04:53:59  bjorn
-# Additional filtering, by Willi Mann.
-#
-# Revision 1.1  2006/05/30 19:04:26  bjorn
-# Added fail2ban service, written by Yaroslav Halchenko.
-#
-# Written by Yaroslav Halchenko <debian@onerussian.com> for fail2ban
-#
-##########################################################################
-
-########################################################
-## Copyright (c) 2008  Yaroslav Halchenko
-## Covered under the included MIT/X-Consortium License:
-##    http://www.opensource.org/licenses/mit-license.php
-## All modifications and contributions by other persons to
-## this script are assumed to have been donated to the
-## Logwatch project and thus assume the above copyright
-## and licensing terms.  If you want to make contributions
-## under your own copyright or a different license this
-## must be explicitly stated in the contribution an the
-## Logwatch project reserves the right to not accept such
-## contributions.  If you have made significant
-## contributions to this script and want to claim
-## copyright please contact logwatch-devel@lists.sourceforge.net.
-#########################################################
-
-use strict;
-use Logwatch ':all';
-
-my $Debug = $ENV{'LOGWATCH_DEBUG'} || 0;
-my $Detail = $ENV{'LOGWATCH_DETAIL_LEVEL'} || 0;
-my $IgnoreHost = $ENV{'sshd_ignore_host'} || "";
-my $DebugCounter = 0;
-my $ReInitializations = 0;
-my @ActionsErrors = ();
-my @CommandsErrors = ();
-my $NotValidIP = 0;             # reported invalid IPs number
-my @OtherList = ();
-
-my %ServicesBans = ();
-
-if ( $Debug >= 5 ) {
-   print STDERR "\n\nDEBUG: Inside Fail2Ban Filter \n\n";
-   $DebugCounter = 1;
-}
-
-while (defined(my $ThisLine = <STDIN>)) {
-   if ( $Debug >= 5 ) {
-      print STDERR "DEBUG($DebugCounter): $ThisLine";
-      $DebugCounter++;
-   }
-   chomp($ThisLine);
-   if ( ($ThisLine =~ /..,... DEBUG: /) or
-        ($ThisLine =~ /..,... \S*\s*: DEBUG /) or # syntax of 0.7.? fail2ban
-        ($ThisLine =~ /..,... \S+: (Fail2Ban v.* is running|Exiting|Enabled sections:)/) or
-        ($ThisLine =~ /\S+\s+rollover performed on/) or
-        ($ThisLine =~ /\S+\s+Connected to .* persistent database/) or
-        ($ThisLine =~ /\S+\s+Jail '.*' uses .*/) or
-        ($ThisLine =~ /\S+\s+Initiated '.*' backend/) or
-        ($ThisLine =~ /\S+\s+Jail .* is not a JournalFilter instance/) or
-        ($ThisLine =~ /\S+\s+Log rotation detected for/) or
-        ($ThisLine =~ /\S+\s+Jail.+(?:stopped|started|uses poller)/) or
-        ($ThisLine =~ /\S+\s+Changed logging target to/) or
-        ($ThisLine =~ /\S+\s+Creating new jail/) or
-        ($ThisLine =~ /..,... \S+\s*: INFO\s+(Set |Socket|Exiting|Gamin|Created|Added|Using)/) or # syntax of 0.7.? fail2ban
-        ($ThisLine =~ /..,... \S+: Verbose level is /) or
-        ($ThisLine =~ /..,... \S+: Restoring firewall rules/)
-       )
-   {
-      if ( $Debug >= 6 ) {
-         print STDERR "DEBUG($DebugCounter): line ignored\n";
-      }
-   } elsif ( my ($LogLevel,$Service,$Action,$Host) = ($ThisLine =~ m/(WARNING|NOTICE):?\s+\[?(.*?)[]:]?\s(Ban|Unban)[^\.]* (\S+)/)) {
-      if ( $Debug >= 6 ) {
-         print STDERR "DEBUG($DebugCounter): Found $Action for $Service from $Host\n";
-      }
-      $ServicesBans{$Service}{$Host}{$Action}++;
-      $ServicesBans{$Service}{"(all)"}{$Action}++;
-   } elsif ( my ($LogLevel,$Service,$Host) = ($ThisLine =~ m/(INFO|WARNING|NOTICE):?\s+\[?(.*?)[]:]?\sFound[^\.]* (\S+)/)) {
-      if ( $Debug >= 6 ) {
-         print STDERR "DEBUG($DebugCounter): Found hit for $Service from $Host\n";
-      }
-      $ServicesBans{$Service}{$Host}{"Hit"}++;
-      $ServicesBans{$Service}{"(all)"}{"Hit"}++;
-   } elsif ( my ($Service,$Host,$NumFailures) = ($ThisLine =~ m/\S+:\s+(\S+): (.+) has (\d+) login failure\(s\). Banned./)) {
-      if ($Debug >= 4) {
-         print STDERR "DEBUG: Found host $Host trying to access $Service - failed $NumFailures times\n";
-      }
-      push @{$ServicesBans{$Service}{$Host}{'Failures'}}, $NumFailures;
-   } elsif ( my ($Service,$Host) = ($ThisLine =~ m/ \S+:\s(.*):\s(\S+)\salready in ban list/)) {
-      $ServicesBans{$Service}{$Host}{'AlreadyInTheList'}++;
-   } elsif ( my ($Service,$Host) = ($ThisLine =~ m/\S+:?\s+\[?([^[]*?)[]:]?\s+(\S+)\salready banned/)) {
-      if ( $Debug >= 6 ) {
-         print STDERR "DEBUG($DebugCounter): Found hit for already banned $Host against $Service\n";
-      }
-      $ServicesBans{$Service}{$Host}{'AlreadyInTheList'}++;
-   } elsif ( my ($Service,$Host) = ($ThisLine =~ m/ \S+:\s(.*):\sReBan (\S+)/)) {
-      $ServicesBans{$Service}{$Host}{'ReBan'}++;
-   } elsif ($ThisLine =~ / ERROR:?\s*(Execution of command )?\'?iptables/) {
-      push @ActionsErrors, "$ThisLine\n";
-   } elsif ($ThisLine =~ / ERROR\s*Failed to execute.*action/) {
-      push @ActionsErrors, "$ThisLine\n";
-   } elsif ($ThisLine =~ / WARNING Command \[.*\] has failed. Received/) {
-      push @CommandsErrors, "$ThisLine\n";
-   } elsif ($ThisLine =~ /ERROR.*returned \d+$/) {
-      push @ActionsErrors, "$ThisLine\n";
-   } elsif (($ThisLine =~ /..,... WARNING: \#\S+ reinitialization of firewalls/) or
-            ($ThisLine =~ / ERROR\s*Invariant check failed. Trying to restore a sane environment/)) {
-      $ReInitializations++;
-   } elsif ($ThisLine =~ /..,... WARNING:  is not a valid IP address/) {
-      # just ignore - this will be fixed within fail2ban and is harmless warning
-   }
-   else
-   {
-      # Report any unmatched entries...
-      push @OtherList, "$ThisLine\n";
-   }
-}
-
-###########################################################
-
-
-if (keys %ServicesBans) {
-    printf("\nBanned services with Fail2Ban:				 Bans:Unbans:Hits\n");
-    foreach my $service (sort {$a cmp $b} keys %ServicesBans) {
-        printf("  %-55s [%3d:%d:%-3d]\n", "$service:",
-               $ServicesBans{$service}{'(all)'}{'Ban'},
-               $ServicesBans{$service}{'(all)'}{'Unban'},
-               $ServicesBans{$service}{'(all)'}{'Hit'});
-        delete $ServicesBans{$service}{'(all)'};
-        my $totalSort = TotalCountOrder(%{$ServicesBans{$service}}, \&SortIP);
-        if ($Detail >= 5) {
-            foreach my $ip (sort $totalSort keys %{$ServicesBans{$service}}) {
-               my $name = LookupIP($ip);
-               printf("    %-53s %3d:%d:%-3d\n",
-                      $name,
-                      $ServicesBans{$service}{$ip}{'Ban'},
-                      $ServicesBans{$service}{$ip}{'Unban'},
-                      $ServicesBans{$service}{$ip}{'Hit'});
-               if (($Detail >= 10) and ($ServicesBans{$service}{$ip}{'Failures'}>0)) {
-                  print "      Failed ";
-                  foreach my $fails (@{$ServicesBans{$service}{$ip}{'Failures'}}) {
-                     print " $fails";
-                  }
-                  print " times\n";
-               }
-               if ($ServicesBans{$service}{$ip}{'AlreadyInTheList'}>0) {
-                  printf("      %d Duplicate Ban attempt(s)\n", $ServicesBans{$service}{$ip}{'AlreadyInTheList'}) ;
-               }
-               if ($ServicesBans{$service}{$ip}{'ReBan'}>0) {
-                  printf("      %d ReBan(s) due to rules reinitilizations\n", $ServicesBans{$service}{$ip}{'ReBan'}) ;
-               }
-            }
-        }
-    }
-}
-
-if ($Detail>0) {
-    if ($#ActionsErrors >= 0) {
-       printf("\n%d faulty action invocation(s)", $#ActionsErrors+1);
-       if ($Detail > 5) {
-          print ":\n";
-          print @ActionsErrors ;
-       }
-    }
-    if ($#CommandsErrors >= 0) {
-       printf("\n%d faulty command invocation(s) from client(s)", $#CommandsErrors+1);
-       if ($Detail > 5) {
-          print ":\n";
-          print @CommandsErrors ;
-       }
-    }
-    if ($ReInitializations > 0) {
-       printf("\n%d fail2ban rules reinitialization(s)", $ReInitializations);
-    }
-    if ($#OtherList >= 0) {
-       print "\n**Unmatched Entries**\n";
-       print @OtherList;
-    }
-}
-
-exit(0);
-
-# vi: shiftwidth=3 tabstop=3 syntax=perl et
-# Local Variables:
-# mode: perl
-# perl-indent-level: 3
-# indent-tabs-mode: nil
-# End:
@@ -1,2 +0,0 @@
-2014-08-04 03:06:26,161 fail2ban.actions[4822]: WARNING [apache-badbots] Ban 37.152.91.34
-2014-08-05 03:06:26,448 fail2ban.actions[4822]: WARNING [apache-badbots] Unban 37.152.91.34
@@ -1,52 +0,0 @@
-2014-08-08 14:59:35,013 fail2ban.server.server[31122]: INFO    Exiting Fail2ban
-2014-08-08 14:59:36,041 fail2ban.server.server[21667]: INFO    Changed logging target to /var/log/fail2ban.log for Fail2ban v0.9.0
-2014-08-08 14:59:36,043 fail2ban.server.database[21667]: INFO    Connected to fail2ban persistent database '/var/lib/fail2ban/fail2ban.sqlite3'
-2014-08-08 14:59:36,072 fail2ban.server.jail[21667]: INFO    Creating new jail 'exim'
-2014-08-08 14:59:36,137 fail2ban.server.jail[21667]: INFO    Jail 'exim' uses pyinotify
-2014-08-08 14:59:36,172 fail2ban.server.filter[21667]: INFO    Set jail log file encoding to UTF-8
-2014-08-08 14:59:36,172 fail2ban.server.jail[21667]: INFO    Initiated 'pyinotify' backend
-2014-08-08 14:59:36,233 fail2ban.server.filter[21667]: INFO    Added logfile = /var/log/exim4/mainlog
-2014-08-08 14:59:36,249 fail2ban.server.filter[21667]: INFO    Set maxRetry = 5
-2014-08-08 14:59:36,251 fail2ban.server.filter[21667]: INFO    Set jail log file encoding to UTF-8
-2014-08-08 14:59:36,252 fail2ban.server.actions[21667]: INFO    Set banTime = 600
-2014-08-08 14:59:36,254 fail2ban.server.filter[21667]: INFO    Set findtime = 600
-2014-08-08 14:59:36,284 fail2ban.server.jail[21667]: INFO    Creating new jail 'sshd'
-2014-08-08 14:59:36,284 fail2ban.server.jail[21667]: INFO    Jail 'sshd' uses pyinotify
-2014-08-08 14:59:36,286 fail2ban.server.filter[21667]: INFO    Set jail log file encoding to UTF-8
-2014-08-08 14:59:36,286 fail2ban.server.jail[21667]: INFO    Initiated 'pyinotify' backend
-2014-08-08 14:59:36,499 fail2ban.server.filter[21667]: INFO    Added logfile = /var/log/auth.log
-2014-08-08 14:59:36,510 fail2ban.server.filter[21667]: INFO    Set maxRetry = 5
-2014-08-08 14:59:36,512 fail2ban.server.filter[21667]: INFO    Set jail log file encoding to UTF-8
-2014-08-08 14:59:36,513 fail2ban.server.actions[21667]: INFO    Set banTime = 600
-2014-08-08 14:59:36,514 fail2ban.server.filter[21667]: INFO    Set findtime = 600
-2014-08-08 14:59:36,515 fail2ban.server.filter[21667]: INFO    Set maxlines = 10
-2014-08-08 14:59:36,788 fail2ban.server.server[21667]: INFO    Jail sshd is not a JournalFilter instance
-2014-08-08 14:59:36,798 fail2ban.server.jail[21667]: INFO    Jail 'exim' started
-2014-08-08 14:59:36,802 fail2ban.server.jail[21667]: INFO    Jail 'sshd' started
-2014-08-08 15:01:30,120 fail2ban.server.transmitter[21667]: WARNING Command ['status', 'ssh'] has failed. Received UnknownJailException('ssh',)
-2014-08-08 15:09:36,978 fail2ban.server.actions[21667]: NOTICE  [sshd] Unban 116.10.191.199
-2014-08-08 15:09:37,187 fail2ban.server.action[21667]: ERROR   rm -f /etc/symbiosis/firewall/blacklist.d/116.10.191.199.auto
-iptables -D INPUT -s 116.10.191.199 -j DROP -- stdout: ''
-2014-08-08 15:09:37,188 fail2ban.server.action[21667]: ERROR   rm -f /etc/symbiosis/firewall/blacklist.d/116.10.191.199.auto
-iptables -D INPUT -s 116.10.191.199 -j DROP -- stderr: 'iptables: Bad rule (does a matching rule exist in that chain?).\n'
-2014-08-08 15:09:37,188 fail2ban.server.action[21667]: ERROR   rm -f /etc/symbiosis/firewall/blacklist.d/116.10.191.199.auto
-iptables -D INPUT -s 116.10.191.199 -j DROP -- returned 1
-2014-08-08 15:09:37,188 fail2ban.server.actions[21667]: ERROR   Failed to execute unban jail 'sshd' action 'symbiosis-blacklist': Error unbanning 116.10.191.199
-2014-08-10 02:27:27,235 fail2ban.server.server[21667]: INFO    rollover performed on /var/log/fail2ban.log
-2014-08-10 02:27:28,109 fail2ban.server.filter[21667]: INFO    Log rotation detected for /var/log/exim4/mainlog
-2014-08-10 02:28:01,747 fail2ban.server.filter[21667]: INFO    Log rotation detected for /var/log/auth.log
-2014-08-10 02:33:29,500 fail2ban.server.filter[21667]: INFO    [sshd] Found 86.101.234.57
-2014-08-10 02:46:06,846 fail2ban.server.filter[21667]: INFO    [sshd] Found 220.130.163.247
-2014-08-10 03:10:43,794 fail2ban.server.filter[21667]: INFO    [sshd] Found 220.130.163.247
-2014-08-10 06:49:27,446 fail2ban.server.actions[21667]: NOTICE  [sshd] Ban 116.10.191.181
-2014-08-10 06:59:28,375 fail2ban.server.actions[21667]: NOTICE  [sshd] Unban 116.10.191.181
-2014-08-10 20:06:41,576 fail2ban.server.actions[21667]: NOTICE  [sshd] Unban 50.30.34.7
-2014-08-13 17:55:50,401 fail2ban.server.actions[17436]: NOTICE  [sshd] 144.0.0.25 already banned
-2014-08-10 20:06:41,785 fail2ban.server.action[21667]: ERROR   rm -f /etc/symbiosis/firewall/blacklist.d/50.30.34.7.auto
-iptables -D INPUT -s 50.30.34.7 -j DROP -- stdout: ''
-2014-08-10 20:06:41,785 fail2ban.server.action[21667]: ERROR   rm -f /etc/symbiosis/firewall/blacklist.d/50.30.34.7.auto
-iptables -D INPUT -s 50.30.34.7 -j DROP -- stderr: 'iptables: Bad rule (does a matching rule exist in that chain?).\n'
-2014-08-10 20:06:41,786 fail2ban.server.action[21667]: ERROR   rm -f /etc/symbiosis/firewall/blacklist.d/50.30.34.7.auto
-iptables -D INPUT -s 50.30.34.7 -j DROP -- returned 1
-2014-08-10 20:06:41,786 fail2ban.server.actions[21667]: ERROR   Failed to execute unban jail 'sshd' action 'symbiosis-blacklist': Error unbanning 50.30.34.7
-2014-08-11 02:27:35,433 fail2ban.server.filter[21667]: INFO    Log rotation detected for /var/log/exim4/mainlog
@@ -1,12 +1,12 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.46.4.
-.TH FAIL2BAN-CLIENT "1" "October 2014" "fail2ban-client v0.9.1" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.41.2.
+.TH FAIL2BAN-CLIENT "1" "March 2014" "fail2ban-client v0.9.0" "User Commands"
 .SH NAME
 fail2ban-client \- configure and control the server
 .SH SYNOPSIS
 .B fail2ban-client
-[\fI\,OPTIONS\/\fR] \fI\,<COMMAND>\/\fR
+[\fIOPTIONS\fR] \fI<COMMAND>\fR
 .SH DESCRIPTION
-Fail2Ban v0.9.1 reads log file that contains password failure report
+Fail2Ban v0.9.0 reads log file that contains password failure report
 and bans the corresponding IP addresses using firewall rules.
 .SH OPTIONS
 .TP
@@ -35,10 +35,10 @@ decrease verbosity
 force execution of the server (remove socket file)
 .TP
 \fB\-b\fR
-start server in background (default)
+start the server in background mode (default)
 .TP
 \fB\-f\fR
-start server in foreground (note that the client forks once itself)
+start the server in foreground mode (note that the client forks once itself)
 .TP
 \fB\-h\fR, \fB\-\-help\fR
 display this help message
@@ -217,8 +217,9 @@ for <JAIL>
 \fBset <JAIL> maxlines <LINES>\fR
 sets the number of <LINES> to
 buffer for regex search for <JAIL>
-.TP
-\fBset <JAIL> addaction <ACT>[ <PYTHONFILE> <JSONKWARGS>]\fR
+.IP
+set <JAIL> addaction <ACT>[ <PYTHONFILE> <JSONKWARGS>]
+.IP
 adds a new action named <NAME> for
 <JAIL>. Optionally for a Python
 based action, a <PYTHONFILE> and
@@ -230,38 +231,45 @@ removes the action <ACT> from
 <JAIL>
 .IP
 COMMAND ACTION CONFIGURATION
-.TP
-\fBset <JAIL> action <ACT> actionstart <CMD>\fR
+.IP
+set <JAIL> action <ACT> actionstart <CMD>
+.IP
 sets the start command <CMD> of
 the action <ACT> for <JAIL>
-.TP
-\fBset <JAIL> action <ACT> actionstop <CMD> sets the stop command <CMD> of the\fR
+.IP
+set <JAIL> action <ACT> actionstop <CMD> sets the stop command <CMD> of the
+.IP
 action <ACT> for <JAIL>
-.TP
-\fBset <JAIL> action <ACT> actioncheck <CMD>\fR
+.IP
+set <JAIL> action <ACT> actioncheck <CMD>
+.IP
 sets the check command <CMD> of
 the action <ACT> for <JAIL>
 .TP
 \fBset <JAIL> action <ACT> actionban <CMD>\fR
 sets the ban command <CMD> of the
 action <ACT> for <JAIL>
-.TP
-\fBset <JAIL> action <ACT> actionunban <CMD>\fR
+.IP
+set <JAIL> action <ACT> actionunban <CMD>
+.IP
 sets the unban command <CMD> of
 the action <ACT> for <JAIL>
-.TP
-\fBset <JAIL> action <ACT> timeout <TIMEOUT>\fR
+.IP
+set <JAIL> action <ACT> timeout <TIMEOUT>
+.IP
 sets <TIMEOUT> as the command
 timeout in seconds for the action
 <ACT> for <JAIL>
 .IP
 GENERAL ACTION CONFIGURATION
-.TP
-\fBset <JAIL> action <ACT> <PROPERTY> <VALUE>\fR
+.IP
+set <JAIL> action <ACT> <PROPERTY> <VALUE>
+.IP
 sets the <VALUE> of <PROPERTY> for
 the action <ACT> for <JAIL>
-.TP
-\fBset <JAIL> action <ACT> <METHOD>[ <JSONKWARGS>]\fR
+.IP
+set <JAIL> action <ACT> <METHOD>[ <JSONKWARGS>]
+.IP
 calls the <METHOD> with
 <JSONKWARGS> for the action <ACT>
 for <JAIL>
@@ -370,7 +378,7 @@ the action <ACT> for <JAIL>
 Written by Cyril Jaquier <cyril.jaquier@fail2ban.org>.
 Many contributions by Yaroslav O. Halchenko <debian@onerussian.com>.
 .SH "REPORTING BUGS"
-Report bugs to https://github.com/fail2ban/fail2ban/issues
+Report bugs via Debian bug tracking system \fIhttp://www.debian.org/Bugs/\fR .
 .SH COPYRIGHT
 Copyright \(co 2004\-2008 Cyril Jaquier, 2008\- Fail2Ban Contributors
 .br
@@ -1,10 +1,10 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.46.4.
-.TH FAIL2BAN-REGEX "1" "October 2014" "fail2ban-regex 0.9.1" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.41.2.
+.TH FAIL2BAN-REGEX "1" "March 2014" "fail2ban-regex 0.9.0" "User Commands"
 .SH NAME
 fail2ban-regex \- test Fail2ban "failregex" option
 .SH SYNOPSIS
 .B fail2ban-regex
-[\fI\,OPTIONS\/\fR] \fI\,<LOG> <REGEX> \/\fR[\fI\,IGNOREREGEX\/\fR]
+[\fIOPTIONS\fR] \fI<LOG> <REGEX> \fR[\fIIGNOREREGEX\fR]
 .SH DESCRIPTION
 Fail2Ban  reads log file that contains password failure report
 and bans the corresponding IP addresses using firewall rules.
@@ -16,7 +16,7 @@ string
 a string representing a log line
 .TP
 filename
-path to a log file (\fI\,/var/log/auth.log\/\fP)
+path to a log file (\fI/var/log/auth.log\fP)
 .TP
 "systemd\-journal"
 search systemd journal (systemd\-python required)
@@ -42,20 +42,20 @@ show program's version number and exit
 \fB\-h\fR, \fB\-\-help\fR
 show this help message and exit
 .TP
-\fB\-d\fR DATEPATTERN, \fB\-\-datepattern\fR=\fI\,DATEPATTERN\/\fR
+\fB\-d\fR DATEPATTERN, \fB\-\-datepattern\fR=\fIDATEPATTERN\fR
 set custom pattern used to match date/times
 .TP
-\fB\-e\fR ENCODING, \fB\-\-encoding\fR=\fI\,ENCODING\/\fR
+\fB\-e\fR ENCODING, \fB\-\-encoding\fR=\fIENCODING\fR
 File encoding. Default: system locale
 .TP
-\fB\-L\fR MAXLINES, \fB\-\-maxlines\fR=\fI\,MAXLINES\/\fR
+\fB\-L\fR MAXLINES, \fB\-\-maxlines\fR=\fIMAXLINES\fR
 maxlines for multi\-line regex
 .TP
-\fB\-m\fR JOURNALMATCH, \fB\-\-journalmatch\fR=\fI\,JOURNALMATCH\/\fR
+\fB\-m\fR JOURNALMATCH, \fB\-\-journalmatch\fR=\fIJOURNALMATCH\fR
 journalctl style matches overriding filter file.
 "systemd\-journal" only
 .TP
-\fB\-l\fR LOG_LEVEL, \fB\-\-log\-level\fR=\fI\,LOG_LEVEL\/\fR
+\fB\-l\fR LOG_LEVEL, \fB\-\-log\-level\fR=\fILOG_LEVEL\fR
 Log level for the Fail2Ban logger to use
 .TP
 \fB\-v\fR, \fB\-\-verbose\fR
@@ -70,9 +70,6 @@ Do not print any missed lines
 \fB\-\-print\-no\-ignored\fR
 Do not print any ignored lines
 .TP
-\fB\-\-print\-all\-matched\fR
-Print all matched lines
-.TP
 \fB\-\-print\-all\-missed\fR
 Print all missed lines, no matter how many
 .TP
@@ -1,12 +1,12 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.46.4.
-.TH FAIL2BAN-SERVER "1" "October 2014" "fail2ban-server v0.9.1" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.41.2.
+.TH FAIL2BAN-SERVER "1" "March 2014" "fail2ban-server v0.9.0" "User Commands"
 .SH NAME
 fail2ban-server \- start the server
 .SH SYNOPSIS
 .B fail2ban-server
-[\fI\,OPTIONS\/\fR]
+[\fIOPTIONS\fR]
 .SH DESCRIPTION
-Fail2Ban v0.9.1 reads log file that contains password failure report
+Fail2Ban v0.9.0 reads log file that contains password failure report
 and bans the corresponding IP addresses using firewall rules.
 .PP
 Only use this command for debugging purpose. Start the server with
@@ -38,7 +38,7 @@ print the version
 Written by Cyril Jaquier <cyril.jaquier@fail2ban.org>.
 Many contributions by Yaroslav O. Halchenko <debian@onerussian.com>.
 .SH "REPORTING BUGS"
-Report bugs to https://github.com/fail2ban/fail2ban/issues
+Report bugs via Debian bug tracking system \fIhttp://www.debian.org/Bugs/\fR .
 .SH COPYRIGHT
 Copyright \(co 2004\-2008 Cyril Jaquier, 2008\- Fail2Ban Contributors
 .br
@@ -1,9 +1,5 @@
 #!/bin/bash

-set -eu
-
-export PYTHONPATH=..
-
 # fail2ban-client
 echo -n "Generating fail2ban-client "
 help2man --section=1 --no-info --include=fail2ban-client.h2m --output fail2ban-client.1 ../bin/fail2ban-client
@@ -0,0 +1,4 @@
+#!/bin/bash
+
+sudo apt-get -y update
+sudo apt-get -y install curl python-systemd dh-systemd python-pip python-inotifyx git build-essential autotools-dev libssl-dev devscripts debhelper git libpcre3-dev libssl-dev
Author	SHA1	Message	Date
Vid Luther	49a44c6a82	changelog for debian packager.	2014-09-12 23:00:30 -05:00
Vid Luther	d14d68d56c	gitignore	2014-09-12 22:27:43 -05:00
Vid Luther	6830497241	changed requirements to python3	2014-09-12 22:25:55 -05:00
Vid Luther	5da1104701	custom Vagrantfile and provisioner This allows me to build in a VM on a Mac.	2014-09-12 22:25:40 -05:00
Vid Luther	38ab997cb3	ran the fail2ban-2to3 script.	2014-09-12 22:24:52 -05:00
Vid Luther	587e626710	Merge branch 'debian-releases/experimental' into pressable/debian	2014-09-12 21:54:01 -05:00